I have a button for Column T that when clicked I would like to run through different column widths 25,35,45,55,65,75.
I've tried a case statement but it doesn't run through each case on the clicks.
I've used the macro recorder to try to auto-apply column widths after I do a CSV import:
(A&B=3.14, C=8, D=13.57, E=24.14, F=9, G=10, H=11.29, I=8.57, J=6.86, K=8, L=13, M=10)
...but for some reason when I execute this macro, "every" column gets the width of 10!
how I can fix the below code?
Sub SetColumnWidth()
Columns("A:B").Select
Selection.ColumnWidth = 3.14
Columns("C:C").Select
Selection.ColumnWidth = 8
Columns("D:D").Select
Selection.ColumnWidth = 13.57
Columns("E:E").Select
Selection.ColumnWidth = 24.14
I needed to match the width a merged area of seven columns to a single column width (for row autofitting). Adding the column unit values and setting the single column to that value produced a significantly narrower width.
The documentation mentions that the column width unit is scaled to the font type and size and the absolute width is given in points.
This is set by the normal style setting in Excel Options or by VBA application.standardfontsize = 8 (in this case).
For instance, ten columns of Arial font 8 at 8.5 units you would think to be equivalent to a single column of 85 units.
In points, the difference is 420 vs. 386.25, or 33.75 points.
Well, the standard character zero has a width at this setting of 4.5 points and 1 unit is 8.25 points, leaving 3.75 points for margins.
Then (10-1) margins allowances time 3.75 points resolves the difference.
Determining the margin allowances is straightforward, and reveals that the gradation with size is stepped by MS design.
For instance, sizes up to 11 use 3.75 points for margins and increasing points for characters (except between 9 & 10).
Sizes 12 through 18 use 5.25 points, 20 & 22 use 6.75, 24 & 26 use 8.25, etc.
I have created a table for this purpose, however I rarely use a "normal" other than 8, so I can probably use that set in programming.
I try find function or create macro witch makes move in to the specified column after clicking on button. But this move will be in the same row, where i was last active.
View 2 Replies View RelatedI am doing a if else statement but I do not whats the keyword for getting the column width value
Eg
if column width value = xx
column width value = xxo
This is doing ALMOST everything I need it to do. The only thing I need is for it to keep the formatting and column widths from the source sheet.
[Code].....
how can know how is my column width in CM ,
View 9 Replies View RelatedI have a 3 column listbox on a userform. I am trying to line the columns up with some label headers on the user form.
On thsi listbox, how can I code the first column to a width of 250, the second column to a width of 50 and the third column to a width of 75?
I would like to know if it's possible to change width of different cells in a single column? Example:
Width of cell A1 would be 10, and width of cell A2 would be 15. Can it be done? If yes how, if no damn. The reason I ask is because I trying to fit a report on one page with a chart and a month worth of data, but some cells are to long and they get cut off.
I have a pivot table in the first sheet which includes the field "Date" as a column label.
In the remaining sheets, except for one, there are pivot tables based on the same underlying dataset which also include the field "Date" as a column label.
I would like to adjust the selection (i.e., exclude some dates) from the column label in the first sheet and see if it is possible to make the same adjustments automatically to the pivot tables in the remaining sheets as well.
note that the field "Date" is used as a Column label, i.e., it is not a Report filter.
Suppose I have the following UDF, which returns the width of the column, but when the column width change (increase or decrease), the UDF is not able to recalculate the column width...what should I do? .....
View 9 Replies View RelatedI've got a Listbox in a User form that looks at data on another spreadsheet purely for informational purposes, not to be selected. I have two problems with what it's doing:
1) There are 23 columns, of varying widths. However the listbox uses a standard width, so some items are truncated and some have too much room.
2) The data changes, and the number of rows may change from 2 to 15000. I've set the RowSource to cover the ranged from A1:W15000, but if only 2-300 lines are selected the user can't grab the scrollbar button to scroll through, but must instead use the arrow, which is rather slow.
Is there any way to set the column widths to match the data, and the Range to only go as far as the last populated row?
I need to know how to format columns in a spreadsheet. What I want to do is autofit the columns, all except for Column A; I want that want at a fixed width of 9. The code below is my attempt to do this, and it's not resulting as I wish. Stepping through the code, it performs the first part beautifully and autofits all of the columns. Where I have the line
View 2 Replies View RelatedFor the past 4 months I have been desperate to find a way to split my sheet so that I can determine the column widths above and below that point independently.
For example:
small width from a1-b1
but
really large width from a2-b2
Is there a way to do that?
Need a bit of help with a dynamic column resize.
This is the scene. Imagine 2 lists of data, each list 2 columns wide (like 2 lists of names and phone numbers). List 1 covers column A and B, List 2 covers column D and E. I want it so that on the push of a button, columns A-E are automatically resized to be just big enough for their longest content, and column C resizes so that column D is on the next page.
The general idea is that you can print the sheet, and put together the pages relating to the seperate lists.
Scenario: Two computers running Windows 7 (64-bit Professional) with Excel 2007, same processor, same hard drive, same memory, same everything except the monitors - see below
Computer 1: HP LA2006x monitor (20" viewable diagonal) @ 1600x900 resolution, 91.79 PPI
Computer 2: HP LA2206x monitor (21.5" viewable diagonal) @ 1920x1080 resolution, 102.46 PPI
We have an Excel spreadsheet that the column widths on columns A through K must equal exactly 6, 1, 6, 1, 8, 1, 13, 2, 8, 1, and 35 respectively in order for the data to be imported into another program. These exact column widths are set on Computer 1 and the .xslx file is saved to a network location.
Computer 2 opens the .xslx file from the exact same network location. The column widths display as 5.86, 0.92, 5.86, 0.92, 12.84; not the exact columns listed above. So if anyone needs to export the data from Computer 2, they have to manually adjust the column widths or run a macro to auto adjust the column widths.
My question, is there anything I can do on Computer 1 or Computer 2 to make it so the column widths are saved and open correctly no matter which one is saving and which one is opening? The 20" monitor on computer 1 cannot display the 1920x1080 resolution... already tried that.
How the heck to work with comboboxes and listboxes.
In entering column widths, I want to do inches. I understand inches. I don't understand points.
The instructions say that it will take whatever is in the User Control Panel: Regional: Number settings. I checked. It is US system. Not points.
MSO 2010. Can I change it to inches or do I need to get used to points?
Is it possible to adjust a cells' column width without the whole column width changing? EXAMPLE...I'm looking to lock rows 1-41 at certain column widths and change the column width as needed from rows 42 and below.
View 4 Replies View RelatedIs there a way to make a macro to make this true?
The WS is 300 rows,
The column width is 6.90
If LEN(B1)>147 then format ROW Height to 0.25
If LEN(B2)147 then format ROW Height to 0.25
If LEN(B300)
I have this VBA (from a recorded macro) how can I amend it so that these two formulas change depending on the number of values....right now the range is to 129 only because we only have 129 cells of info but some sheets will have more some will have less. I want excel to base it based on the column I which used to be H.
VB:
Sub SLCREPORTDATA()
Cells.Select
Range("F1").Activate
Cells.EntireColumn.AutoFit
Columns("H:H").Select
[Code]....
I want to know that can we adjust column or row width with keyboard.
View 1 Replies View RelatedRunning into this issue of "transworksheet macros"
I have a master "update" commandbutton on sheet 1. I have two sub "update" buttons on sheet 2 and 3 respectively.
What I would like to do is have the user click the master button, that would "click" the two sub buttons so they run their respective macros on their respective worksheets (within the same worksheet.
I have tried pasting the macro code in the master button, telling it to select the sub worksheet and then run the macro, but the marco runs itself on the master worksheet instead.
Refer to enclosed excel file, I have drew a chart base on the data in side. However, for the last column which is "SG Productivity(KUSD)", The column very small even cannot be seen, is there any way can enlarge columns in this field without changing other column? T
View 1 Replies View Relatedi want a code to adjust the column A:Y from width
View 9 Replies View RelatedI have multiple tables that populate with data based on a combination of metrics that are tied to various dropdown menus. Whenever a combination of metrics yields a row without a value in at least one cell, then that row is automatically hidden. My problem is that while the rows are hidden, the column number's don't adjust. For example, if row 3 is hidden in a table with 5 rows, then the column numbers appear as 1, 2, 4, 5 (the table will shift from 5 rows to 4).
View 1 Replies View RelatedI have got a few combo boxes on my worksheet. But when I adjust the width of the columns the size of the combo boxes changes as well. How can I make it so that the combo boxes stay frozen even though the columns size is being changed?
View 3 Replies View RelatedIs it possible to adjust column width of a PW protected worksheet without unprotecting it, or unprotect it and adjust in background then PW protect it?
On sheet1 H1 = column width value
Will adjust Sheet2 (password protected) column E width
I have a number of cells where I've put to wrap text, but the cell size is not adjusting when I type past the size of the cells, how do I get the cells the get bigger automaticly to fit all the text but bigger in height not length?
View 2 Replies View RelatedI have a excelsheet that looks like this:
Column A | Column B | Column C
Los Angeles | Fire Dept | 3
Los Angeles | Health Services | 12
New York | Fire Dept | 8
New York | Health Services | 22
New York | Internal Services | 100
New York | Public Works | 7
Chicago | Health Services | 15
Chicago | Public Works | 56
Chicago | Social Services | 4
And I am trying to make it look like this:
Fire Dept
Health Services
Internal Services
Public Works
Social Services
Los Angeles
3
12
New York
8
22
100
7
Chicago
15
56
4
Is there a way to get cells in a column to adjust their height automatically, or with a macro to account for text overflow/wrap?
For example, lets say a column is 200 px in width and it's height is enough to view a single line of text, and the column is set to wrap text. Now more text is entered into the cell and it needs to be re-sized to fit two lines of text.
Is there a way to create a macro button to have this done automatically?