I have a column (k) of 65,000 rows with numbers that are either positive or negative digits. The next column (L) has classified them as either 1 for positive number or 2 for negative.
There may be a run of all positive or all negative numbers or 2 positives and 3 negatives or any combination of positive and negative numbers reading down the column.
Reading down the column (from L1), I need to find any sequence of alternating 1 positive, followed by 1 negative or vice versa.
I am looking for evidence to find any sequence that has more than 2 alternations. (Remembering that positive is 1 and neg is 2)
That is, two or more alternations of a positive followed by a negative or neg followed by a positive.
I need to separate these lines into columns such that, for example, the first line would be in 6 columns: (Jackson, TN) (9623) (BCBS TN) (98) (UnitedHlthCare) (2)
The delimiter does not work because some of there is no one character that always separates the text and the numbers. I've tried going through in word and typing something like '%' where I want to separate, but with thousands of lines of data that is extremely tedious.
Is there any formula I can use that would be capable of solving this?
I'm writing a macro that’s taking user input (from a form I developed) and will generate a chart according to the input.
One requirement for this chart is that the background alternates fill colors between gray and white. Every four columns need to be either gray or white. Based on the duration the user entered, the width of this chart is created. The length (the number of rows) is constant.
I've tried different loops (for, if, do - you name it I tried) This loop is just out of my league. Any and all help would be greatly appreciated.
Summary of Facts: - Starting Point of Chart is B2 (the top left corner of the chart will be in B2) - the number of columns is dynamic (based on user input) - The rows are constant are (2 through 16) - Every four columns need the fill color to be either gray or white
I'm sure there's a simple way to do this (I've been trying countif/match formulas but I'm not quite there)! I need to group line items with the same dollar value, WITHIN say 1 cent. If I do a pivot it will group exact matches, but I'm looking for the flexibility to group something within a few cents. So instead of pivots, I was trying to think of a formula that would do what Column A is doing below:
*I manually added Column A, looking for a formula that would group dollar values within 1 cent, assuming I've sorted Column B from smallest to largest:
A word text blablabla B word text blablabla A dog cat france B dog cat france B this that other A this that other A tiger dragon monkey B tiger dragon monkey
My source data I can't get to sort alternating on columns A and B, and I would like the data to alternate A-B-A-B-A-B while retaining the pairings of data in the adjacent fields. Is this possible?
I have a spreadsheet that contains thousands of rows and I need to highlight all the duplicates in Column B.
What I need though is one group o duplicates to be colored one color and then the next group of duplicates be colored a different color. I need just a 2 color banding.
My need for 2 colors is that the cells contain 9 digit numbers and there can be duplicate groups right next to each other and for the eye to distinguish a different grouping of cells I need that 2 color banding.
I have the below code that colors everything in one color. Can I be modified or a completely new code to do 2 colors?
Code: Sub Dups() Dim Rng As Range Dim CL As Range
Set Rng = Range(Range("B1"), Range("B" & Rows.Count).End(xlUp))
For Each CL In Rng If WorksheetFunction.CountIf(Rng, CL.Value) > 1 Then CL.Interior.ColorIndex = 6 End If Next CL End Sub
My spreadsheet has rows with inspection numbers in column A, but there are varying numbers of rows associated with an inspection number. I'd like to change the color of the rows for every other inspection number to yellow using a formula. I think it has to involve an if/then statement but I can't figure out how to word the formula to just choose every other group of inspection numbers.
Is there a way to shade alternating rows in a range and have it always be alternating no matter if a row is added in the middle of the range. If I do it manually now and add a row it messes up the shading and fixing it manually is very time consuming.
In column H I have dates from 1/1/2008 to 12/31/2013. What I would like to do is transfer that data to column J, but alternate it every other row and then insert the word Date into the blank cells. For instance J1 would read "Date" and then J2 would read 1/1/2008 J3 would be Date and J4 would be 1/2/2008. I have a large database and I tried to use array formulas and they slow it down to a crawl so I was working with DSUM, but I don't feel like wasting time with adding in Date manually.
I'm looking for a way to count groups of alternating rows of "TRUE" values across 3 columns. There will never be an occurrence of more than one "TRUE" value per row. In the sample below, alternating TRUE values occur in rows 4 through 7, so this would be counted with the groups of 4.
how to add alternating cells when all are numbers, e.g. B8 to KW8 are all numbers and I want to add B8, D8, F8, etc. until KV8 and then separately add C8, E8, G8, etc until KW8. Is there a more efficient way to do this than =sum(b8,D8, etc)? I also need to do the same with =counta(b8, d8, etc).
so I have been googling to figure out how to write a macro that will select every other column on my workbook. All that keeps coming up is conditional formatting, which I do not want. I am not trying to highlight the columns in alternating colors, I just want to select them.
I am starting at column F and I would like it to search until the end of the columns and select every other column ending with the last column with data in it.
I know I could search by a specific row and tell it to find the first blank cell then offset it, but there is no particular row that will always have data in it, so I guess it needs to check by column until it finds the first column without any data in all rows and then offset it.
Anyone know what I am talking about here?
I know it should be fairly simple but I couldn't seem to find any answers anywhere else.
Also, anyone know any good websites that have definitions for some basic macros? I'd love to start learning how to write this stuff on my own.
I am interested in selecting cells in alternating rows as follows:
12 Red Happy 00 Unique descriptor 13 Grn Sad 03 Unique descriptor 14 Yel Happy 02 Unique descriptor
I am interested in selecting all the "12, 13, etc", "Red, Grn, ..." and "Happy, Sad..." for analysis, but want to skip all the rows containing the 0- numbers and the descriptors for them. How do I quickly select only the alternating cells in a column within a selection?
I am having a hard time getting my match functions to work with letters and numbers in the same range. I am also trying to figure out a way to have the ranges switch if there is an error. because the data is in multiple columns. It is hard to explain so I have attached a sample workbook.
I'm trying to use the following formula in conditional formatting in cell A2 when the range A2:AW64 is selected (this conditional formatting will be copied to all cells in the selected range):
Formula is: =isodd($A2)
The error I keep getting is this:
"You may not use references to other worksheets or other workbooks for Conditional Formatting criteria."
I'm trying to use this conditional formatting because column A is our "Order" column. "Order" can be from 1 to 13 and this column is sorted ascending. There can be multiple rows in each Order number. So I want to shade all 1's, 3's, 5's, etc... so that each Order group has alternating shading.
I also want to use conditional formatting, not VBA, to get this to work. In the future, rows might be added to an Order number or two and I want the shading to automatically adjust.
I am looking for a way to highlight groups of identical number cells in alternating grey and white. My goal is to make it clear when there is a repeating set of numbers. Below is an example of what a completed state of this would look like that I created manually. The real form I will be using this code on will have long number which is why I am looking for this added clarification. I am using excel 2010.
I'm going to be using a spreadsheet to keep track of where different people are at. So if Person 1 is in Room 3, I will stick a 3 in the box next to their name and then can look at the spreadsheet whenever I need and see what room they are in. When I'm deciding what room to put a person in, though, I need to be able to quickly glance at a list of Room #'s and see what one's are still available. So I have a bank of Room #'s in the spreadsheet....1,2,3, etc.
What I'd like, is some way to set this up so that when I put, for example, "3" in the cell next to "Person 1" the spreadsheet automatically removes "3" from the bank of available Room #'s and when I delete the "3" because the person has left, it adds "3" back to the bank of available Rooms.
I have a mass of data which look something like this:
table removed
and I require the ranges of reference numbers to be listed in a column one above the other, which requires inserting new rows. I also need the date & description columns copied down into the newly inserted rows.
So basically for example I would want the top row to now read:
table removed
and then apply the same procedure to the other ranges below this.
I have a text file with rows and columns of numbers ranging from 1-4 digits that I'd like to import/copy into Excel with each number being in its own cell. But whenever I copy/try to import, Excel splits all of the 3-4 digit numbers up into single digit numbers. The text file has 10,000+ columns (each number occupies two columns so I have half of that amount in numbers) and 300+ lines.
Is the file simply too large for Excel to handle or is there a way I can do this?
In the ID column of the attached excel file whenever I convert the numbers stored as text to numbers it results in a weird transformation.
e.g. an ID of 480610141001 becomes 4.8061E+11. When I do the same process in the name column, which has similar numbers, it will give the correct result following the same process.
Say column A has either numbers or text in each cell, I need a macro to only get each number in each cell that is not a duplicate of a number in any previous cell and list each number found down column B.
Is there a way either by VBA or manually (preferably both, if possible) to actually unite the X amount of numbers that are in a cell given the contents is alphanumeric? I'll give you the following examples to see if you can understand what I' referring to?
DATA output should be asd67,h876 --------> 67876 2,3,ujdj5&34 -------> 23534 909k86m34 --------> 9098634
