I am using an area chart to display the price spread between different types of wheat.
Now the problem I am having is that, at the "end" of the chart, ie. the most recent observation date, the line drops to zero while the value is actually well above zero. How can I avoid this ?
I am attaching a screenshot : Wheat Spread.PNG‎
I am trying to graph the following data in an area chart with line charts superimposed on the area chart. I have a lot of data (and a lot going on) so I'm trying to figure out the best way to show this in excel from a functional standpoing (i can't get this to work in excel!!) to also an asthetic standpoint (dont want it to look terrible or illegible). This is what I'm trying to chart:
1) Weather data (temperature) by region:
So one region, would be: Northwest
I would like the "area" (so a shaded region) to be the min/max of the temperature data for each month.
2) I would like to show the temperature for each year as a line graph on the chart - so you can see if a year falls in or out of the shaded region.
3) I would like to show a company's sales increases across the same months per year as separate line charts. I may choose to just show the biggest outlier year in the end... or to show 2006 (the latest data).
What I am trying to convery with the chart is that the company's sales is or is not tied to weather deviations. I have attached an excel file with the data. I haven't been able to use the area chart or get a two axis chart to work or get it to look even remotely professional.
I would like to create a chart in vba which contains 2 sets of data, both using the same x axis. The first must be a line graph, the second a staggered bar chart. This must be represented on one chart with data labels. Also, how do I change the colour of the plots?
View 5 Replies View RelatedI have a chart that combines 2 xy plots and a set of stacked columns ( total of 4 series).
I can adjust the series ordering between the 2 xy plots, and between the stacked columns, but not for all 4 at the same time.
I'd like the legend to show up as:
Series1, Series2, Series3, Series4
where 1 and 2 are the xy plots and 3 & 4 are the components of the stacked columns.
It is currently:
Series3, Series4, Series1, Series2
Any idea how to re-order the legend entries?
I'm trying to figure out a way of showing a price range on lots of different products. My spreadsheet is set out as follows(sorted by price ascending):
column A Column B
Product1 $1.99
Product1 $2.43
Product1 $3.01
Product2 $21.01
Product2 $23.98
I want to be able to summarise the product 1 price range as $1.99-$3.01 and product 2 as £21.01-$23.98. Is it possible somehow to concatenate the price from the first and last occurence of each product in column A?
Code:
ActiveSheet.Shapes.AddChart.Select
ActiveChart.ChartType = xlAreaStacked
I created a simple stacked area type in vba. Is it possible and how to have this stacked area to get values from combobox and textbox?
Currently I'm working with an amount of data that corresponds with one data point every day in one year. Not every day is measured thus nothing is entered, some days can also be 0. Therefore I've made an if statement in the column next to the raw data column with an if statement returning #N/A if a cell contains nothing or 0.
This gives me normally no problems when I want to make a Line chart, excel just skips the #N/A cells and draws the line to the next data point (that's the whole reason for the if statement). However this is impossible with area charts. I can understand why, but I still want it as nothing or 0 in a cell not necessarily mean that nothing happened.
I need to display a selected area in an excel sheet in a VB form! I am not sure how to convert the selected area to an image ! The area already contains some images! I am attaching the file for ur refrence!
I need the portion which is within the frame to be converted as an image and get displayed in a Vb form!
I'm trying to create an area chart to show the change in the number of staff working in my store over time. Unfortunately, Excel likes to draw diagonal lines. That is if I have the following data:
9:00AM - 1 staff
10:00AM - 2 staff
11:00AM - 1 staff
Excel will draw a diagonal line between each data point, rather than creating a box. This gives the illusion that there are somehow half people working at 9:30 and 10:30. Is there a workaround?
I'm having trouble drawing an area chart that ends sharply at a specifided value rather than drawing a diagonal line down to zero. Let me explain
I watched an Excellsfun youtube tutorial that used the IF statement to chart a subset of normal curve data as the second series in an area chart.
It looks like an easy way to add some interactivity. I enter a single value, and the IF statement checks to see if the data in the first sereis is less than or equal o that number. Once the first series data exceeds the number I entered, the IF statement populates the second series with "", which is to say a blank entery.
Here's my spreadsheet data and the chart it produces:
Normal
ABCDEFGHIJ1Series AHeight AHeight B:5.5210.04070850.0407085d2.87228320.06610770.0661077x5430.09509940.0950994540.12118840.1211884Height A: =NORM.DIST(A2:A11,$F$1,$F$2,FALSE)650.13680530.1368053Height B:=IF(A2
I have been measuring variation against some key performance indicators and trying to plot them on a chart i.e., line chart.
Is there any way in Excel that i can highlight in different colours the area between the variable and benchmarks? I want to fill the area say as green when the variable performed better than benchmark (area between the variable line and benchmark line) and as red if variable under performed than benchmark (area between benchmark and variable.
trying to find a way to insert a table into an active chart area.
unlike inserting charts as objects inside of a spreadsheet, i am trying to insert a table of the spreadsheet into the chart window.
the purpose is so that i may have a numerical reference to my data.
usually i post questions to which i have begun work on - but i have had no luck even brainstorming how this would be done!
the ONLY solution i have surmised is to insert a table into a chart area as an Object(picture)
but how would one write a macro for making dynamic range screen shotpicture files?
I have a series of X-Y Data (0-10 in both axis) that I want to overlay on an area chart to show outliers outside of an accepted condition. I have been able to create the area chart and the scatter chart separately but when I try to combine them the axis gets messed up. I tried using a secondary axis but I am not that skilled
I have attached the data and my feeble attempts at creating this chart.
I need to have a footer that displays the file name in the chart area so that it will copy with the chart when I paste into a word document.
View 1 Replies View RelatedI have plenty of experience with VBA outside of charts so that's where I need assistance. I need to get SeriesCollection(4), the PTAI series, to appear on the area chart second from the bottom instead of on the top.
The order for the non-line series should be, from top to bottom:
SeriesCollection(3) - Non-Mission AC ( Training, T&E, AMarc series)
SeriesCollection(2) - Total Pipeline series
SeriesCollection(4) - PTAI series
SeriesCollection(1) - Available PMAI series
Here's the
Sub MakeSandChart()
Dim ChartSource As Range
Dim ChartName As String
Dim ChartSheet As String
Dim yCount As Integer
Dim PAA_Value As Integer
Application. ScreenUpdating = False
passtype = Mid(ActiveSheet.Name, 5, 1)
Set ws = Worksheets(ActiveSheet.Name)
ChartName = Left(ActiveSheet.Name, 5)
ChartSheet = ChartName & " Chart"
ChartName = "F18" & passtype
Set ChartSource = Union(Range("SummRowDate" & passtype), _
Range("SummRowTAI" & passtype), _
Range("SummRowNM" & passtype), _
Range("SummRowTotPipe" & passtype), _
Range("SummRowPTAI" & passtype), _
Range("SummRowPMAI" & passtype), _
Range("SummRowPlanPAA" & passtype), _
Range("SummRowWorkPAA" & passtype), _
Range("SummRowDrillPAA" & passtype), _
Range("SummRowBaseline" & passtype))
Worksheets(ChartSheet).Activate
I have charts that needs to be placed on specific position and have specific sizes on a chartsheet. I use chartobjects(i).plotarea (top, left, width, height) for that.
Unfortunately when I set these values they still change and get antoher value, there is some scaling going on in Excel and I do not know where that comes from. I have been looking on the internet and finally I found a piece of code which works, but still not good enough, because the legend is also not good positioned.
De data for resizing the charts (ChtNew), the legends and the charttitle I get from other charts (ChtOrig). The legend.legendposition of ChtOrig does not have a value but it still have a top,left,height en width which I use.
I show you my code, the part with the for-next is taken from the internet.
With ChtNew.legend
.Top = ChtOrig.Legend.Top
.Height = ChtOrig.Legend.Height
.Left = ChtOrig.Legend.Left
.Width = ChtOrig.Legend.Width '* 1.1
.Top = ChtOrig.Legend.Top + ChtOrig.ChartTitle.Top
End With
I have an interactive chart displaying stacked area charts for 2006 and 2007
I currently have 2006 in front of 2007, but as the user chooses 1 of 20 units, it will look better to move 2007 in front of 2006
I'm trying to produce step charts like Andy Pope does on his web site using the area chart method. http://www.andypope.info/charts/stepchart.htm. This involves duplicating each of the values in each data series, which is tedious if there are a lot of points. Plus the fact that the area series is offset by 1 from the axis series. Can anyone think of a formula to do this? There are plenty of posts here about deleting duplicates, but I couldn't find much about creating duplicates. I can duplicate row numbers using =CEILING(ROW(),2)/2
View 4 Replies View RelatedI have a stacked area chart located on its own individual worksheet. I would like to use VBA to apply colours to individual series based on the name of that series. I have applied the following code which I found on the following help forum, changing it slightly to fit my needs: http://www.ozgrid.com/forum/showthread.php?t=91381
View 3 Replies View Relatedhow to resize the plotarea of a chart so that it wont overlap with the title. I can't seem to find the appropriate property to let me determine the height or the bottom edge of the chart title.
View 2 Replies View RelatedI am creating a line chart with markers using 5 series of data. I want to colour in/shade the area under the lowest series.
View 6 Replies View RelatedThis seems so simple but i looked everywhere and i cannot find the vba script to add a 3 point solid black line border around the chart and plot area of my graphs. The record macro option does not record this.
View 3 Replies View RelatedI need J22 to multiply based on years in B22 AND increase 5% for each of those years (compounding) after two years (excludes year 1 from 5% increase). In addition the cell needs to remain blank if D22 is blank. B22 = 1, then the stockprice needs to remain the same, and only increase by 5% after year 1.
Currently...
B22 = a number of years indicated by the formula: =IF(A22="","",DATEDIF(A22,I3,"y"))
J22 =IF(ISNA(VLOOKUP(D22,stockprices,2,FALSE)),"",VLOOKUP(D22,stockprices,2,FALSE))
Example:
If J22 stockprice lookup is $1000.00, and the number of years listed in B22 is 6, then the reported value in J22 needs to be $1494.40.
Windows 7 Ultimate / Excel 2010
I have calculated the implied volatility for different single options using the newton raphson method. But, I also need to calculate the implied volatility which minimizes the sum of squared differences between the observed market price and the model price for each day. I guess one needs to use vectors (jacobian matrix) to do this, but I do not know how to expand the code to be able to do this. Anyone have any idea how this can be done? I have attached the [code] I have used to calculate the implied volatility for one option.
View 2 Replies View Relatedhttp://img444.imageshack.us/img444/6...board02nm0.jpg. How do I put "share price" on the side of this chart?
View 4 Replies View RelatedThe analysis basically has 2 data components to it:
The 1st part, is a basic transaction list of shopping items bought through the year. Each transaction's shopping item also has the quantity of that item purchased at that time.
The 2nd part, is a pricing sheet for all the different types of shopping items. The pricing sheet has different prices for different quantities at which the item is purchased.
What I am trying to do is to find the relevant price for shopping item, which depends on not only what the item is, but also the quantity. In point form, it should follow the logic below:
1) Identify the item in the shopping list (worksheet 1) from the list of prices (worksheet 2)
2) Find quantity in the prices worksheet that is closest to the quantity in the shopping list (i.e. where the difference between the quantity on transaction list and the quantity on the pricing sheet is the least)
3) Pull the price for this "closest quantity"
I have uploaded a worksheet showing the structure of that data.
[url]
Is there some VB code I need to do this, or can it just be a few simple formulas?
All data is located within one book. I have two sheets with material codes in each sheet which include pricing (existing and current)
Sheet1 (has existing material codes plus existing pricing) Has about 1200 lines
Sheet2 (has current material codes plus current pricing), has about 36000 lines
I need to cross check if the material code (taken from sheet1) are still available in sheet2, and if they are, copy the current price back to sheet1. The current price needs to be pasted back into sheet1 (next to the existing price). If the material code doesn't exist (for whatever reason, in sheet2), the program needs to move onto the next line and leave the current price for that material code blank. The program should finish once all the lines in sheet1 are completed. I have attached a sample of what I'm trying to do,
I have have a large array of prices (across rows) and am looking for the closest price to match a price that I have been provided with. It's a basic benchmarking exercise on a row by row basis....and the price can be positive or negative. Is there a clean way to reference the closest price?
I have come across a fair amount of solutions, but none worked optimally - particularly the =INDEX(Data,MATCH(MIN(ABS(Data-Target)),ABS(Data-Target),0)) approach....it just didn't work for some lines, and only worked for values less than source price in other instances.
I would also like to reference the source on the next column.
I am trying to do an if statement where I ask if the 2009 price is .50 or less away from the 2008 price, bring back "Check" See below:
2008 2009
$23.95 $24.15
Using excel 2007
On this chart the X-axis are dates and the y-axis are daily scores. The chart shows each day's data point and computes a trend line. How can I dynamically calculate and display the average score as a single value somewhere on the chart? I could calculate the average in a cell outside the chart object but would like it to be part of the chart. I do not want to show the average as a separate horizontal line within the chart grid.
View 2 Replies View Related