Footer That Displays Filename In Chart Area?
Jan 23, 2012I need to have a footer that displays the file name in the chart area so that it will copy with the chart when I paste into a word document.
View 1 Replies
ADVERTISEMENT
Graph The Following Data In An Area Chart With Line Charts Superimposed On The Area Chart
Nov 1, 2006I am trying to graph the following data in an area chart with line charts superimposed on the area chart. I have a lot of data (and a lot going on) so I'm trying to figure out the best way to show this in excel from a functional standpoing (i can't get this to work in excel!!) to also an asthetic standpoint (dont want it to look terrible or illegible). This is what I'm trying to chart:
1) Weather data (temperature) by region:
So one region, would be: Northwest
I would like the "area" (so a shaded region) to be the min/max of the temperature data for each month.
2) I would like to show the temperature for each year as a line graph on the chart - so you can see if a year falls in or out of the shaded region.
3) I would like to show a company's sales increases across the same months per year as separate line charts. I may choose to just show the biggest outlier year in the end... or to show 2006 (the latest data).
What I am trying to convery with the chart is that the company's sales is or is not tied to weather deviations. I have attached an excel file with the data. I haven't been able to use the area chart or get a two axis chart to work or get it to look even remotely professional.
Phantom Chart Displays Until Worksheet Scrolled
Dec 28, 2006I have an excel report containing eight or so worksheets. A user can make a number of selections with the report to change its context. E.g. to analyse different types of customers; high spend or low spend etc. Sales projections are then presented with several Excel Charts adapting to the user's preferences.
My problem occurs when the user makes a selection (they choose a ComboBox option.) This then triggers my code, which creates the data tables and graphs depending on their selection. The report is quite long so I have created two points in the same worksheet where the user can change the same customer selection option. (Basically, all I have done is create a second ComboBox which triggers the first). Again, this works perfectly causing no errors (other than the display error below�c)
However, when I change the second instance of the ComboBox a phantom copy of my chart is dumped on the current screen view. If I scroll off screen and then back again the phantom chart disappears. I need a quick solution to fix this bug until I have some more time to look at what's causing it. Therefore I simply want to add a line of code, which will scroll off screen and then return back to the same position. (Not very neat, but at least it will get rid of my duplicate chart). As I have screen updating turned off the user won't notice what is happening.
Stacked Area Chart In VBA
Oct 28, 2013Code:
ActiveSheet.Shapes.AddChart.Select
ActiveChart.ChartType = xlAreaStacked
I created a simple stacked area type in vba. Is it possible and how to have this stacked area to get values from combobox and textbox?
Area Chart With #N/A Data
May 5, 2009Currently I'm working with an amount of data that corresponds with one data point every day in one year. Not every day is measured thus nothing is entered, some days can also be 0. Therefore I've made an if statement in the column next to the raw data column with an if statement returning #N/A if a cell contains nothing or 0.
This gives me normally no problems when I want to make a Line chart, excel just skips the #N/A cells and draws the line to the next data point (that's the whole reason for the if statement). However this is impossible with area charts. I can understand why, but I still want it as nothing or 0 in a cell not necessarily mean that nothing happened.
Vertical Lines - Area Chart
Dec 29, 2008I'm trying to create an area chart to show the change in the number of staff working in my store over time. Unfortunately, Excel likes to draw diagonal lines. That is if I have the following data:
9:00AM - 1 staff
10:00AM - 2 staff
11:00AM - 1 staff
Excel will draw a diagonal line between each data point, rather than creating a box. This gives the illusion that there are somehow half people working at 9:30 and 10:30. Is there a workaround?
Dynamic Area Chart Using IF Statement?
Nov 19, 2011I'm having trouble drawing an area chart that ends sharply at a specifided value rather than drawing a diagonal line down to zero. Let me explain
I watched an Excellsfun youtube tutorial that used the IF statement to chart a subset of normal curve data as the second series in an area chart.
It looks like an easy way to add some interactivity. I enter a single value, and the IF statement checks to see if the data in the first sereis is less than or equal o that number. Once the first series data exceeds the number I entered, the IF statement populates the second series with "", which is to say a blank entery.
Here's my spreadsheet data and the chart it produces:
Normal
ABCDEFGHIJ1Series AHeight AHeight B:5.5210.04070850.0407085d2.87228320.06610770.0661077x5430.09509940.0950994540.12118840.1211884Height A: =NORM.DIST(A2:A11,$F$1,$F$2,FALSE)650.13680530.1368053Height B:=IF(A2
Highlight Area In A Chart Based On Set
Nov 30, 2011I have been measuring variation against some key performance indicators and trying to plot them on a chart i.e., line chart.
Is there any way in Excel that i can highlight in different colours the area between the variable and benchmarks? I want to fill the area say as green when the variable performed better than benchmark (area between the variable line and benchmark line) and as red if variable under performed than benchmark (area between benchmark and variable.
Table Inside Chart Area
Aug 4, 2008trying to find a way to insert a table into an active chart area.
unlike inserting charts as objects inside of a spreadsheet, i am trying to insert a table of the spreadsheet into the chart window.
the purpose is so that i may have a numerical reference to my data.
usually i post questions to which i have begun work on - but i have had no luck even brainstorming how this would be done!
the ONLY solution i have surmised is to insert a table into a chart area as an Object(picture)
but how would one write a macro for making dynamic range screen shotpicture files?
Combining Area And Scatter Data Into Chart?
May 16, 2014I have a series of X-Y Data (0-10 in both axis) that I want to overlay on an area chart to show outliers outside of an accepted condition. I have been able to create the area chart and the scatter chart separately but when I try to combine them the axis gets messed up. I tried using a secondary axis but I am not that skilled
I have attached the data and my feeble attempts at creating this chart.
Incorrect Plot Order: Area Chart
Oct 26, 2006I have plenty of experience with VBA outside of charts so that's where I need assistance. I need to get SeriesCollection(4), the PTAI series, to appear on the area chart second from the bottom instead of on the top.
The order for the non-line series should be, from top to bottom:
SeriesCollection(3) - Non-Mission AC ( Training, T&E, AMarc series)
SeriesCollection(2) - Total Pipeline series
SeriesCollection(4) - PTAI series
SeriesCollection(1) - Available PMAI series
Here's the
Sub MakeSandChart()
Dim ChartSource As Range
Dim ChartName As String
Dim ChartSheet As String
Dim yCount As Integer
Dim PAA_Value As Integer
Application. ScreenUpdating = False
passtype = Mid(ActiveSheet.Name, 5, 1)
Set ws = Worksheets(ActiveSheet.Name)
ChartName = Left(ActiveSheet.Name, 5)
ChartSheet = ChartName & " Chart"
ChartName = "F18" & passtype
Set ChartSource = Union(Range("SummRowDate" & passtype), _
Range("SummRowTAI" & passtype), _
Range("SummRowNM" & passtype), _
Range("SummRowTotPipe" & passtype), _
Range("SummRowPTAI" & passtype), _
Range("SummRowPMAI" & passtype), _
Range("SummRowPlanPAA" & passtype), _
Range("SummRowWorkPAA" & passtype), _
Range("SummRowDrillPAA" & passtype), _
Range("SummRowBaseline" & passtype))
Worksheets(ChartSheet).Activate
Legend Overlaps The Plot Area Of Chart
May 4, 2007I have charts that needs to be placed on specific position and have specific sizes on a chartsheet. I use chartobjects(i).plotarea (top, left, width, height) for that.
Unfortunately when I set these values they still change and get antoher value, there is some scaling going on in Excel and I do not know where that comes from. I have been looking on the internet and finally I found a piece of code which works, but still not good enough, because the legend is also not good positioned.
De data for resizing the charts (ChtNew), the legends and the charttitle I get from other charts (ChtOrig). The legend.legendposition of ChtOrig does not have a value but it still have a top,left,height en width which I use.
I show you my code, the part with the for-next is taken from the internet.
With ChtNew.legend
.Top = ChtOrig.Legend.Top
.Height = ChtOrig.Legend.Height
.Left = ChtOrig.Legend.Left
.Width = ChtOrig.Legend.Width '* 1.1
.Top = ChtOrig.Legend.Top + ChtOrig.ChartTitle.Top
End With
Swap Series In Stacked Area Chart
Sep 11, 2007I have an interactive chart displaying stacked area charts for 2006 and 2007
I currently have 2006 in front of 2007, but as the user chooses 1 of 20 units, it will look better to move 2007 in front of 2006
Duplicate Values For Area Step Chart
Jun 6, 2008I'm trying to produce step charts like Andy Pope does on his web site using the area chart method. http://www.andypope.info/charts/stepchart.htm. This involves duplicating each of the values in each data series, which is tedious if there are a lot of points. Plus the fact that the area series is offset by 1 from the axis series. Can anyone think of a formula to do this? There are plenty of posts here about deleting duplicates, but I couldn't find much about creating duplicates. I can duplicate row numbers using =CEILING(ROW(),2)/2
View 4 Replies View RelatedStacked Area Chart Series Colour Change
Jan 6, 2010I have a stacked area chart located on its own individual worksheet. I would like to use VBA to apply colours to individual series based on the name of that series. I have applied the following code which I found on the following help forum, changing it slightly to fit my needs: http://www.ozgrid.com/forum/showthread.php?t=91381
View 3 Replies View RelatedPrevent Chart Title And Plot Area Overlapping
Jan 29, 2010how to resize the plotarea of a chart so that it wont overlap with the title. I can't seem to find the appropriate property to let me determine the height or the bottom edge of the chart title.
View 2 Replies View RelatedShading Area Under Lowest Series In Line Chart
Oct 2, 2006I am creating a line chart with markers using 5 series of data. I want to colour in/shade the area under the lowest series.
View 6 Replies View RelatedArea Chart To Display Price Spread Between Different Types Of Wheat
Feb 17, 2014I am using an area chart to display the price spread between different types of wheat.
Now the problem I am having is that, at the "end" of the chart, ie. the most recent observation date, the line drops to zero while the value is actually well above zero. How can I avoid this ?
I am attaching a screenshot : Wheat Spread.PNG
Format Chart/Plot Area With Border Macro 2007
May 16, 2008This seems so simple but i looked everywhere and i cannot find the vba script to add a 3 point solid black line border around the chart and plot area of my graphs. The record macro option does not record this.
View 3 Replies View RelatedPrint 2 Selected Area (highlighted Area)?
Apr 11, 2013How can I print 2 selected area (highlighted area). I know there is a trick to do that. Right now I can only select (highlight) one area to print, but would like to know how to print 2 or more areas at same time
View 7 Replies View RelatedProgrammable Print Area: Macro To Set The Print Area According To The Amount Of Data In A Particular Range Of Cells
Feb 25, 2009Using Excel 2003 I am trying to write a macro to set the print area according to the amount of data in a particular range of cells. I find I can include this instruction
View 2 Replies View RelatedHow To Set Fixed Print Area In Excel So Cells Within Print Area Can Still Be Modified
Feb 12, 2013I have a workbook with multiple sheets that I need to print.
Is there a way to create a fixed print area within which you can mess around with formatting without extending or shrinking the print area?
I have tried adjusting the margins settings so that they are all the same, but this does nothing to keep a fixed print area.
Amending The Filename In Cell("filename")
Jul 7, 2006I am trying to display the Filename in a cell on my worksheet. However, when I enter the =Cell("filename"), it provides the full path (C:/Documents......Cost Summary.xls) How can I display only the filename without the path?
View 3 Replies View RelatedFormula Displays Instead Of Value!!
Jul 8, 2006I have tried a simple =CONCATENATE(A1+B1) in a cell and it shows the formula not the value. I have tried
1. Formatting cell to various formats other than text
2. Deleting the Row/Column and adding a new one and trying the same formula
3. Ctrl + ` to show/hide formulas
I dont know why it keeps displaying the formula. Anyone know of a way to fix this?
Date Displays As ####
Jul 29, 2006I have one more question, for now... I am imputing a date into a cell that is too narrow for the date, so the cell outputs xxxxxxx. How can I get around this without changing the cell width.
Calculation Result Is Displays As 0.0%
May 15, 2009I am having a difficult time with a calculation. I took over someone else's duty who is no longer with the company. The calculation used did not account for entire columns & the data I need to pull fromhas grown larger than the calculation. When I hit "F2" to manually change the data array, everything works fine until I hit enter and then the result displays as 0.0%. When I hit the insert function button, the result shows as the correct number. I tried copying the format only from an adjacent cell, but this did not work. When I tried to undo my changes, the cell still displays as 0.0%
The original calc is:
=SUM(IF(cData!$T$2:$T$45998="Internal",IF(cData!$N$2:$N$45998=9,1,IF(cData!$N$2:$N$45998=10,1,0)),0) )/SUM(IF(cData!$T$2:$T$45998="Internal",IF(cData!$N$2:$N$45998<>"",1,0),""))
The new calc is:
=SUM(IF(cData!$T$2:$T$65536="Internal",IF(cData!$N$2:$N$65536=9,1,IF(cData!$N$2:$N$65536=10,1,0)),0) )/SUM(IF(cData!$T$2:$T$65536="Internal",IF(cData!$N$2:$N$65536<>"",1,0),""))
The calc from the cell below the cell I am working in:
=SUM(IF(cData!$T$2:$T$45998="Internal",IF(cData!$O$2:$O$45998=9,1,IF(cData!$O$2:$O$45998=10,1,0)),0) )/SUM(IF(cData!$T$2:$T$45998="Internal",IF(cData!$O$2:$O$45998<>"",1,0),""))
Formula That Displays Uniques Only
Jul 14, 2008I have a list of names in a column that will be changing on a weekly basis (with some names repeating). I need to create a Named Range that only counts unique values from that list of names (dynamically changing every week).
View 11 Replies View RelatedIf No MsgBox Still Displays Message?
Mar 4, 2013The following code is allowing me to stop or go ahead and delet a value.
If value deleted then msgbox value deleted sucesfully.
The problem now is that if I press cancel i still get msgBox for valur sucesfully deleted even though value has not been deleted.
What do i need to change in the code?
Code:
Private Sub CB3_Click()
Dim v
v = InputBox("Enter a new version number")
Range("A1").Value = v
Dim Found As Range
[Code] .....
Text Formatting Displays As ####
Dec 29, 2008Why does a cell formatted as "text", display ### but shows the actual words when formatted as "general?"
View 13 Replies View RelatedHow To Put Formula Into Footer
Jun 18, 2004Is there any way to put a formula into a footer OR have a footer read the contents of a particular cell on that page? The standard buttons for your footer does not allow this. How can I make this happen?
View 4 Replies View Related