I have a list of numbers such as:
A01
A23
A53
A64
A74
A128
B01... the goes on too approximatly D128
and i wanted to know if there is a way to assign the value to the row?
For example:
A23 in column A row 23
A53 in column A row 53
is there any method that achieves this?
How to create a spreadsheet with what I think will be a very simple formula?
If date in B2 - date in A2 is 1 or less days, put a 1 in cell C2.
If date in B2 - date in A2 is 7 or less days but more than 1, put a 2 in cell C2.
If date in B2 - date in A2 is 30 or less days but more than 7, put a 3 in cell C2.
If date in B2 - date in A2 is 90 or less days but more than 30, put a 4 in cell C2.
If date in B2 - date in A2 is 91 days or more, put a 5 in cell C2.
OR
Another, maybe simpler, way of saying it is:
If date in B2 - date in A2 is 1 or less days, put a 1 in cell C2.
If date in B2 - date in A2 is 2-7 days, put a 2 in cell C2.
If date in B2 - date in A2 is 8-30 days, put a 3 in cell C2.
If date in B2 - date in A2 is 31-90 days, put a 4 in cell C2.
If date in B2 - date in A2 is 91 days or more, put a 5 in cell C2.
I currently have a spreadsheet which I use to do an audit of the office stationery supplies.
There 3 columns at the focus of this question:
F - Number of items in stock
H - Stock re-ordering level
I - Order Required
I currently have an IF statement to tell me if I need to re-order any stock, by comparing the Number of items in stock against Stock Re-ordering level.
The statement is =IF(H1>=F1, "Yes","No")
This works fine under most circumstances. However, in some of the H cells, I have the text "Special" which indicates that the stock will only need re-ordering on a special occasion.
Any value I enter in F will cause the I to say "Yes".
Is there any way to make the word "Special" equivalent to 0, so I says "No"?
In column 'o' I have inserted a number for course name in column 'p'. I want to assign a course name to that particular number as follows:
Column 'o' Number ... Column 'p' Course name
1: A. B. C.
2: J. K. L.
3: P. Q. R.
4: X. Y. Z.
And so on as per course names.
If I enter number 1 in inputbox then I want to enter the course name in column 'b4' respectively.
I have a list of random dates between 09/01/05 and 07/01/06. I would like to assign a week number to each date. For example, I would like it to be week 1 if the date is between the dates of 09/01/05 and 09/07/05. Is there any simple way of going about this?
View 3 Replies View RelatedI have a medication start end and admission date.
and i want to assign a number value of 1 to all the records that the medication start date is 2 days after the admission date. How do I do this using the ifs function.
I use my spreadsheet to keep score during tournaments. when i calculate my leaderboard at the end of the event i list the results first place all the way down until it finishes the list of players. i need to be able find players with the same or equal score and list them as tied for the same place.
another words if i get to the 3rd place and i had 3 players tie for third i need my leaderboard to show them all in 3rd place . currently it would number then 345. i listed below how it should format it. i also attached a file it will make it more clear.
We have started a new venture from 5th April & I need to create a template for a year and assign week no against the dates. The week1 will start from 5th April & week 52 will end on 31st March.
Also there will be a summary of the Week No(Starting Date & End Date) against each week at the top of the template. I could put the formula for the summary part but I am unable to figure out how to assign week no against the dates as given below. It is very difficult to assign the week no manually for the whole year & also it is vulnerable to error. a formula across B7:B23 which can deliver the desired result?
Sheet2 ABC1Week NoStart DateEnd Date2Week15-Apr8-Apr3Week29-Apr15-Apr4Week316-Apr22-Apr5 6DateDesired
Result 75-AprWeek1 86-AprWeek1 97-AprWeek1 108-AprWeek1 119-AprWeek2 1210-AprWeek2 1311-AprWeek2 1412-
AprWeek2 1513-AprWeek2 1614-AprWeek2 1715-AprWeek2 1816-AprWeek3 1917-AprWeek3 2018-AprWeek3 2119-
[Code] .........
I'm currrently using column I and col J
in col I are all the units of measurement: KG, PKT, BAG
in ColJ is the formula to return:
KG as 9999999
PKT as 8888888
BAg as 7777777
if(i2=kg, 999999999,"false!")
i was thinking of using if....but triple if formulas would be long isn't it?
PART2 of this would be using:
=IF((SUMPRODUCT(--(db!$A$2:$A$36000=$B$1),--(db!$F$2:$F$36000=C$5),--(db!$G$2:$G$36000=C$6),--(db!$E$2:$E$36000=$A7),--(db!$D$2:$D$36000=$B7),db!$I$2:$I$36000))=9999999,"KG","Invalid")
to check 5 values and if it is 999999999 it'll return KG
8888888 PKT
7777777 BAg
I need to count the number of times a value appears in a row and assign a number that tells which occurence of the text it is.
For example
Name Address
Jim 123 Smith Street
Jane 123 Smith Street
Bob 543 Apple Street
Mary 543 Apple Street
I would like a way to insert a column that puts a 1 next to Jim and a 2 next to Jane, a 1 next to Bob and a 2 next to Mary and so on.
Ultimately, I want to sort the list and delete all the twos, thus deleting the duplicate address entry.
I have found ways to count cells but what I am trying to do is in column F I have a list of meeting topics, and sometimes these repeat in a year. in my drop down menu I have all of them listed however my supervisor wants me to add a count after the meeting number in the 1_1X format where x is the number of times a topic has been used.
The output will be added to my macro here
Code:
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Dim y As String
Dim z As String
Dim b as Integer
If Target.Cells.Count > 1 Then Exit Sub
If Intersect(Target, Range("MEETINGNUMBER")) Is Nothing Then Exit Sub
[Code] .......
I have 379 sample identities in my Excel spreadsheet in A2:A380. I want to randomly assign a number from 1-5 to each of these.
View 1 Replies View RelatedI have figured out how to assign a letter grade to a number, but am having trouble assigning it the other way, a number to a letter grade. For instance: If a student gets an A, I want the column next to it to indicate that the A represents a 4; a B represents a 3; a C represents a 2; D a 1; and F a 0. This will allow an easy grade point average calculation.
A 4 History
C 2 Math
A 4 English
B 3 Physical Ed
D 1 Science
GPA 2.80
I have a long list of items. I would like to assign the same number to each of the replicates. I've been trying to expand on this: = COUNTIF($A$1:A1,A1). which increments the number for each replicate, but don't seem to be getting anywhere. The attached file might make it clearer what I'm after.
View 3 Replies View RelatedUserform2 is popped up from another userform3.
How can I have userform 3 when clicked fill in a textbox on userform2 and then finally assign it to cell F3 on my worksheet.
VB:
Private Sub CommandButton2_Click()End Sub
So I need commandbutton2 (which needs to retain a value of 1` when clicked ) on Userform3 to assign the value of 1 to TextBox44 (Which is using control Source F3 so the value here ends up in F3
VB:
Private Sub TextBox44_Change()
If TextBox44 > 5 Then
MsgBox "Your entry must be part between 1 and 5", vbCritical
Exit Sub
End If
End Sub
I need to assign to a variable, the total number of text entries in col. A (or alternatively in a named range).
View 5 Replies View RelatedExcel 2003: I need code that, when an "x" is entered in a cell in the "Activity" worksheet to assign a temporary unit #, it will look for the next available Temporary Unit # in the "Assign" worksheet. Then mark that unit # as "assigned" (by placing an "X" in the column next to it) and copy it to a cell in the "Activity" sheet.
I will be doing the same thing with assigning different types of PO numbers. I figure if I have the code for the Unit #, I can use the same logic for the other assignments, with some modifications, of course.
I've attached a sample workbook.
If I am not considering the most effective way to accomplish what I am trying to do here, I have no ego at all about someone suggesting a better solution.
I am building a spreadsheet for contractors to use to submit home rehab bids. I am using a Windows 8 and Excel 2013. How to assign a monetary value to a number/quantity.
For example, when the contractor indicates 2 toilets need to be replaced and 1 toilet needs to be repaired, I would like to assign the value of $300 to replace a toilet and $150 to repair. Ultimately, I would like the 2 and the 1 to be automatically totaled to read as $750 in the total line at the bottom of the table.
I need to pull a reference number and assign it to all records in a particular section. The code I recorded keeps going back to the first section. Also would like it to repeat until all records have the reference number attached.
06010-100Beginning Balance07/09/2004AD06011-10007/23/2004AD06011-10008/06/2004AD06011-100
06011-100Beginning Balance07/09/2004AD07/23/2004AD08/06/2004AD
Sub Macro1()
'
' Macro1 Macro
' Macro recorded 10/14/2008 by acantu
'
'
Selection.Copy
Selection.End(xlDown).Select
Selection.End(xlDown).Select
Range("C7").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("B7").Select
Selection.End(xlDown).Select
Range("C63").Select
Range(Selection, Selection.End(xlUp)).Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Selection.End(xlToLeft).Select
Selection.End(xlDown).Select
Selection.End(xlDown).Select
Selection.End(xlDown).Select
End Sub
So I have this list (I made it a little bit shorter).
So what you see is two different tasks (01 and 02) and three different conditions (A, B and C). In column B you see the result I would like to have. '/Searchtask_01.html' in A1 belongs to conditions A, because it is in session A. However, '/Searchtask_01.html' in A10 belongs to conditions B, because it is in session B.
How to get the results in B with a formula?
B20 is the number that the user enters. It can be any number and it will create new sheets below and text of sheet name in B21:F21.
If i change the sheet name below, B21:F21 would also automatically change.
I have some delivery ratings from suppliers, and I want to assign a specific letter to each rating, depending of the obtained number. Criteria is:.........
View 4 Replies View RelatedTrying to have a formula assign a number to a cell depending on a number in that cell.
Example
In all cells in a range from C8 to G13, if there is a 1, i want the number in C20 to show, if there is a 2, whats in
D20, 3/E20, 4/F20, 5/G20, 6/H20
i have column with 40.000 entries. I have added to the column entry my ID
=B1&"?aid1425". How can i get rid off colum A without effecting column B with the ID?
Is it possible to assign a formula to a name that is defined and use the defined name, that will be easier to use.
say =VLOOKUP($A:$A,Sheet1!$A:$B,2,FALSE)
I would like to use the above function and name it. Is there a way out?
I am doing an assignment about credit rating and I am trying to make a spread sheet based on Moody's credit rating method.
I have more or less finished my model, but I have one final problem; in the end I will come up with a numeric score, which can be translated into the final rating (Aaa,Aa1 etc.) based on some ranges. I just can not figure out how to formulate the formula, especially because I have no experience working with ranges.
I have tried with some IF formula's, but they seem to be way too long and complex, for what I imagine should be a relatively simple task.
In the attached sheet I have a final value of 6.9, which should give an A3 rating given that it is within the 6.5 - 7.5 range.
Test sheet.xlsx
This code finds the second avaliable row from the top of the sheet.
View 3 Replies View RelatedI have read a lot of posts, and maybe I am way out of my leage.
I am trying to setup a spreed sheet for our fire department.
We want to create a way to track training pay. When someone attends the
training we want to just put an "x" in next to their name in the column for
that training event rather then 9.75 for example. But we also want to be able
to add up all training for that individual for the year and see what we paid
them.
The idea is we have a sheet that shows us checks of who attended and who
did not. But we also want to add up the pay associated with that x.
So:
We want column A to be member names
Column B is a training event.
We want to go down and put in an "X" for each member who attended.
Now What I want is to have that "x" be associated with a dollar value. For
example lets say that they get $10 for that training.
THe idea is that I can run a total at the end of the year for each member
for each "x" and see how much money they recieved. I.E. the "x" is a hidden
value maybe that when I add up all the "x"s for a member it will give me
total dolar value for all training they attended.
I want to assign a text to a value. e.g if i have 2, it should come up as negative.
View 9 Replies View RelatedI want to assign a value to a cell so that when a word is entered into the cell, it registers with a sum formula at the end of that row. I am trying to rank a group of people based on organization membership. For example...
John Smith gets 30 points for being president of a team, 20 points for being vice pres, 10 for being secretary, etc. There are 10 teams, A-J, I want to be able to just enter the letter of the team into a cell in the column corresponding to the position that John Smith holds.
At the end of Johns Smith's row, i need a sum formula that gives me a numerical value to rank each person based on involvement.