Is it possible to assign a formula to a name that is defined and use the defined name, that will be easier to use.
say =VLOOKUP($A:$A,Sheet1!$A:$B,2,FALSE)
I would like to use the above function and name it. Is there a way out?
Need write a script that assigns a formula to a cell everytime the workbook is opened. Currently when I synce the workbook with SharePoint, it deletes the formula from the cell.
View 4 Replies View RelatedIn cell B77 i have a percentage formulated from other information in the sheet. I want cell B78 to show a word based on the percentage score.
As follows:
0%-25%- Poor
25%-50% - Competent
50%-75% - Professional
75%-100% - Expert
I want to assign a cell a formula that changes base on variable, example
myVar=3
Cell(1,1).value = "=average(1:{myVar})"
what do i do to make this work instead of {myVar}?
I have three variables; Independent variables x & y, and dependent variable z. x & y can take the values 1,2,3 and can equal each other z can also take on values 1,2,3 but can never equal x or y. I tried using if/and statements to solve this (see below), but I would have to do it for each case and it exceeds Excels embedded function limit.
=If(and(B7=1,B10=1),riskduniform(E4:E5),if(and(B7=1,B10=2),3,if(and(B7=1,B10=3),2,if(and(B7=2,B10=2),riskduniform(1,3),if(and(B7=2,B10=1),3,if(and(B7=2,B10=1),3,if(and(B7=3,B10=3),riskduniform(1,2),if(and(B7=3,B10=1),2,if(and(B7=3,B10=2),1)))))))))
I am trying to get a code which searches each row for a keyword, and then assigns a value to it depending on what group of keywords it is.
For example, if the Name or Comment mentions certain fruit keywords, I want it to assign the value: "Fruit", and if it mentions certain vegetable keywords, I want to assign it "Vegetables", and if it is unrelated to either, I want to keep it blank. If the name/comment mentions both fruit and vegetables then I want it to say "Error".
Since the keywords I am using are mostly two letters, I want the search to only search for the two letters on its own, and not as part of a sentence. e.g. if the key word is ED, I don't want it to return a value for "I rested". Instead, I want it to stay blank.
i.e. I want the code to take information from column A and B, and assign a value based on the keywords in column D and E. As an example:
A B C
Name Comment Value
V1 Eating vegetables are good for you Vegetable
null lock out of ep. Fruit
S-1 It is JUST
Fruit-sp Error
D E
Fruit Vegetable
EP SW
KG SP
ST CM
BV LP
The formula I used so far is this: where C3 is the first value
C3=IF(OR(ISNUMBER(LOOKUP(100,SEARCH(Sheet1!$D$2:$D$6,A3))),ISNUMBER(LOOKUP(100,SEARCH(Sheet1!$D$2:$D$6,B3)))),"Fruit","")&IF(OR(ISNUMBER(LOOKUP(100,SEARCH(Sheet1!$E$2:$E$6,A3))),ISNUMBER(LOOKUP(100,SEARCH($E$2:$E$6,B3)))),"Vegetable","")
In columns D and E I put a leading and trailing space between each word to only search for the keywords themselves, and not as part of a word. (e.g. ST is correct instead of haSTe).
This formula seems to work only for 60% of the information, problems occur when the keyword is at the end of comment sentence: the value is blank. e.g. in row B4 of the table I made above my formula returns a blank.
I need creating a tool for numerology.
Every alphabet from a to z has a number associated with it.
A = 1, b 2 , c = 3 etc
Numeric Values for Each Numeral
A1N5
B2O7
C3P8
D4Q1
E5R2
F8S3
G3T4
H5U6
I1V6
J1W6
K2X5
L3Y1
M4Z7
I can either use excel or access or write this.
Example 1 , r = 2 , I = 1, L = 3. .
If I write RIL in column 1 , column 2 should say 213 and column 3 should add 2+1+3 and display 7.
Example 2:
Col 1 = Infosys Ltd
Col 2 should say 1587313 344
Col 3 = 1 + 5 + 8+ 7+ 3+1+3 3+4+4 = 39 , 3+ 9 = 12 , add 1+2 = 3
I have some delivery ratings from suppliers, and I want to assign a specific letter to each rating, depending of the obtained number. Criteria is:.........
View 4 Replies View RelatedNeed to write a formula that would assign a letter grade (in row W) to the average in row V, based on the school's scale. So, row V contains my averages (in % form) and I want row W to have the letter equivalents.
93+=A
85-92=B
75-84=C
67-74=D
<66=F
i have column with 40.000 entries. I have added to the column entry my ID
=B1&"?aid1425". How can i get rid off colum A without effecting column B with the ID?
I am doing an assignment about credit rating and I am trying to make a spread sheet based on Moody's credit rating method.
I have more or less finished my model, but I have one final problem; in the end I will come up with a numeric score, which can be translated into the final rating (Aaa,Aa1 etc.) based on some ranges. I just can not figure out how to formulate the formula, especially because I have no experience working with ranges.
I have tried with some IF formula's, but they seem to be way too long and complex, for what I imagine should be a relatively simple task.
In the attached sheet I have a final value of 6.9, which should give an A3 rating given that it is within the 6.5 - 7.5 range.
Test sheet.xlsx
I have a list of numbers such as:
A01
A23
A53
A64
A74
A128
B01... the goes on too approximatly D128
and i wanted to know if there is a way to assign the value to the row?
For example:
A23 in column A row 23
A53 in column A row 53
is there any method that achieves this?
This code finds the second avaliable row from the top of the sheet.
View 3 Replies View RelatedI have read a lot of posts, and maybe I am way out of my leage.
I am trying to setup a spreed sheet for our fire department.
We want to create a way to track training pay. When someone attends the
training we want to just put an "x" in next to their name in the column for
that training event rather then 9.75 for example. But we also want to be able
to add up all training for that individual for the year and see what we paid
them.
The idea is we have a sheet that shows us checks of who attended and who
did not. But we also want to add up the pay associated with that x.
So:
We want column A to be member names
Column B is a training event.
We want to go down and put in an "X" for each member who attended.
Now What I want is to have that "x" be associated with a dollar value. For
example lets say that they get $10 for that training.
THe idea is that I can run a total at the end of the year for each member
for each "x" and see how much money they recieved. I.E. the "x" is a hidden
value maybe that when I add up all the "x"s for a member it will give me
total dolar value for all training they attended.
I want to assign a text to a value. e.g if i have 2, it should come up as negative.
View 9 Replies View RelatedI want to assign a value to a cell so that when a word is entered into the cell, it registers with a sum formula at the end of that row. I am trying to rank a group of people based on organization membership. For example...
John Smith gets 30 points for being president of a team, 20 points for being vice pres, 10 for being secretary, etc. There are 10 teams, A-J, I want to be able to just enter the letter of the team into a cell in the column corresponding to the position that John Smith holds.
At the end of Johns Smith's row, i need a sum formula that gives me a numerical value to rank each person based on involvement.
I don't see why I cannot populate the following array The usedvar is an array of letters and I'm trying to build a new array that converts them into ascii.
Code:
Dim usedvar_asc() As Variant, f As Integer, g As Integer, temp_usedvar_asc As Integer
Dim temp_usedvar As String
For f = 1 To UBound(usedvar)
temp_usedvar = usedvar(f)
usedvar_asc = Asc(temp_usedvar)
Next
how to assign the value of whole row from one sheet to another sheet?
Worksheets("Result").Cells(count, 1).Value = Worksheets("Current").Cells(k, 1).Value
the above code assign only the specifc cell value. but i need to assign whole row
Does anyone have a macro that could assign a 16-digit number, seperated by dashes, to a computer? (i.e. Computer ID: xxxx-xxxx-xxxx-xxxx)
View 9 Replies View RelatedI am defining ranges for cells in a row by the formula:
Set myrange3 = Range("B13", Cells(13, Columns.Count).End(xlToLeft))
Set myrange4 = Range("B14", Cells(14, Columns.Count).End(xlToLeft))
Set myrange5 = Range("B15", Cells(15, Columns.Count).End(xlToLeft))
Set myrange6 = Range("B16", Cells(16, Columns.Count).End(xlToLeft))
Set myrange7 = Range("B17", Cells(17, Columns.Count).End(xlToLeft))
.
.
.
.
.
Set myrange62 = Range("B72", Cells(72, Columns.Count).End(xlToLeft))
The last one is 62 assuming data wont go over 62nd line. However, there would be always a room for error if this is done manually. Is there any way, I could assign range variables only till that row which has data
For example
The data below shows I only need to define range variables namely myrange1 including cells 2 and 5 till myrange7 of cell values 9 and 6.
A B
2 5
3.4 8
5 12
6 23
77 56
8 7
9 6
The syntax:
LastRow = Selection.SpecialCells(xlCellTypeLastCell).Row helps by giving the number of the last valid data row, but I am not sure how this might be used if at all in automatically assigning ranges of valid row cells to variables.
Sub FileProcessing()
Dim InputFile As String
Dim wb As Workbook
InputFile = ThisWorkbook.Sheets("Sheet1").Range("C3").Value
Workbooks.Open Filename:=InputFile
wb=InputFile
'more CODES here
End sub
I keep getting error on the line:
wb=InputFile
The value in ThisWorkbook.Sheets("Sheet1").Range("C3"). is
C:Documents and SettingsPATSYSDesktopInput0909.xls
I currently have a spreadsheet which I use to do an audit of the office stationery supplies.
There 3 columns at the focus of this question:
F - Number of items in stock
H - Stock re-ordering level
I - Order Required
I currently have an IF statement to tell me if I need to re-order any stock, by comparing the Number of items in stock against Stock Re-ordering level.
The statement is =IF(H1>=F1, "Yes","No")
This works fine under most circumstances. However, in some of the H cells, I have the text "Special" which indicates that the stock will only need re-ordering on a special occasion.
Any value I enter in F will cause the I to say "Yes".
Is there any way to make the word "Special" equivalent to 0, so I says "No"?
I want to assign a value to a character or string
Like I have formula p2p3= (n-1)*p +(2*e)
I want to assign values(number) to n,p,e.............so that i can get p2p3....like want to assign 'n'=4
I don't want to use cell number for calling values of n,p,e
Is it possible to assign a name to a range of cells, so that when you insert a formula into another cell you can call that range of cells into the formula?
View 5 Replies View RelatedFirst challenge will be assigning point values to Words so I can them up and create averages etc
So I have 4 words I need to learn to assign point vales to, then create a formula that will count the points in a row. That will get me off and running,
So here is a very vague idea of what I mean, this would go in A5 as a example
if A1:D1= complete+2 incomplete+0 submitted+1 missing-1
so if I had a row that was:
Submitted | Submitted |Complete| Complete | Missing | 5
( 5 would be the value the formula would return 1+1+2+2-1)
I have recently found out how to create a dropdown list (easy). Now I am wondering if it is possible to create a dropdown list that has a value assigned to each name in the list?
For example: I have the following list;
Australian states:
1) QLD
2) ACT
3) WA
4) NT
5) NSW
6) TAS
7) VIC
When a person chooses their "state" I want there to be a corresponding value attached to it. These values are:
1) QLD - 0.82
2) ACT - 0.87
3) WA - 0.78
4) NT - 0.69
5) NSW - 0.87
6) TAS - 0.20
7) VIC - 1.17
Is this possible?
How can I execute two macros with one button press?
the sub names are CDO_Text and CDO_Mail
In column 'o' I have inserted a number for course name in column 'p'. I want to assign a course name to that particular number as follows:
Column 'o' Number ... Column 'p' Course name
1: A. B. C.
2: J. K. L.
3: P. Q. R.
4: X. Y. Z.
And so on as per course names.
If I enter number 1 in inputbox then I want to enter the course name in column 'b4' respectively.
I need to assign two actions to a one button.
1. action: Copy Column A, paste to Column C
2. Write time&date into G5
I am only capable of doing one button for each action using the macro recorder and simple code:
[Code] .....
Basically I have columns A and columns B.
Column A contains a list of words
Column B is blank.
If a cell in column A contains a word like "univ", I want the number 1 to appear in the respective row in column 2.
If a cell in column A does not contain a word "univ", I want the number 0 to appear in the respective row in column 2.
