Find Cells With Same Value And Assign A Number To Each
Jun 11, 2009
I use my spreadsheet to keep score during tournaments. when i calculate my leaderboard at the end of the event i list the results first place all the way down until it finishes the list of players. i need to be able find players with the same or equal score and list them as tied for the same place.
another words if i get to the 3rd place and i had 3 players tie for third i need my leaderboard to show them all in 3rd place . currently it would number then 345. i listed below how it should format it. i also attached a file it will make it more clear.
View 2 Replies
ADVERTISEMENT
Feb 27, 2013
So I have this list (I made it a little bit shorter).
So what you see is two different tasks (01 and 02) and three different conditions (A, B and C). In column B you see the result I would like to have. '/Searchtask_01.html' in A1 belongs to conditions A, because it is in session A. However, '/Searchtask_01.html' in A10 belongs to conditions B, because it is in session B.
How to get the results in B with a formula?
View 1 Replies
View Related
Mar 22, 2014
How to create a spreadsheet with what I think will be a very simple formula?
If date in B2 - date in A2 is 1 or less days, put a 1 in cell C2.
If date in B2 - date in A2 is 7 or less days but more than 1, put a 2 in cell C2.
If date in B2 - date in A2 is 30 or less days but more than 7, put a 3 in cell C2.
If date in B2 - date in A2 is 90 or less days but more than 30, put a 4 in cell C2.
If date in B2 - date in A2 is 91 days or more, put a 5 in cell C2.
OR
Another, maybe simpler, way of saying it is:
If date in B2 - date in A2 is 1 or less days, put a 1 in cell C2.
If date in B2 - date in A2 is 2-7 days, put a 2 in cell C2.
If date in B2 - date in A2 is 8-30 days, put a 3 in cell C2.
If date in B2 - date in A2 is 31-90 days, put a 4 in cell C2.
If date in B2 - date in A2 is 91 days or more, put a 5 in cell C2.
View 9 Replies
View Related
Aug 1, 2014
I have one workbook with 3 Sheets (Table1/Table2/Table3). In Table 3 are the following columns "Table1" and "Table2". I need one script which search in table1 and table2 the words from test1 to test15 and write the assign numbers in table 3 in the right columns / row! If one value is not found, this value should have the number 0 in table 3.
I have the following examples attached, file Mappe1_Test1.xlsx is the before status and Mappe1_Test.xlsx should be the after status.
View 3 Replies
View Related
May 1, 2009
I have a list of numbers such as:
A01
A23
A53
A64
A74
A128
B01... the goes on too approximatly D128
and i wanted to know if there is a way to assign the value to the row?
For example:
A23 in column A row 23
A53 in column A row 53
is there any method that achieves this?
View 10 Replies
View Related
Jul 30, 2009
I have a schedule database the one I need to transform some cell values in time format. The thing is that I have the format as follows, and I was trying to set a macro to convert every "*" in 15 min value without succcess.
Example
Associate below works as folllows:
Sat 3:30 - 8:30 Mon: 4:00 - 8:00
Sun 2:30 - 5:45
*(start) represents 0:15 min value.
I need to transform the *'s and sum the time format and place the value below the START and STOP column.-
Note: (disregard dots)
Agent: Julia Roberts
Day Start Stop 00:00 1:00 2:00 3:00 4:00 5:00 6:00 7:00 8:00
Sat.............................................** **** **** *** **** **
Sun.....................................** *** **** ***
Mon ...............................................**** **** **** ****
etc
View 3 Replies
View Related
Jan 23, 2014
I currently have a spreadsheet which I use to do an audit of the office stationery supplies.
There 3 columns at the focus of this question:
F - Number of items in stock
H - Stock re-ordering level
I - Order Required
I currently have an IF statement to tell me if I need to re-order any stock, by comparing the Number of items in stock against Stock Re-ordering level.
The statement is =IF(H1>=F1, "Yes","No")
This works fine under most circumstances. However, in some of the H cells, I have the text "Special" which indicates that the stock will only need re-ordering on a special occasion.
Any value I enter in F will cause the I to say "Yes".
Is there any way to make the word "Special" equivalent to 0, so I says "No"?
View 4 Replies
View Related
Jun 26, 2014
In column 'o' I have inserted a number for course name in column 'p'. I want to assign a course name to that particular number as follows:
Column 'o' Number ... Column 'p' Course name
1: A. B. C.
2: J. K. L.
3: P. Q. R.
4: X. Y. Z.
And so on as per course names.
If I enter number 1 in inputbox then I want to enter the course name in column 'b4' respectively.
View 2 Replies
View Related
Jul 12, 2006
I have a list of random dates between 09/01/05 and 07/01/06. I would like to assign a week number to each date. For example, I would like it to be week 1 if the date is between the dates of 09/01/05 and 09/07/05. Is there any simple way of going about this?
View 3 Replies
View Related
Nov 30, 2007
I am trying to find number of cells in a range.
I tried:
=COUNTIF(U97:U103,AND(">"&5,"<"&8))
and assumed it will count the 6 and 7's.
It always results with 0.
View 10 Replies
View Related
Feb 8, 2013
We are trying to track the average star values of reviews posted to our clients accounts. Here is an example of the spreadsheet we have set up:
Company Name
Review 1
Review 2
Review 3
Review 4
Review 5
Company 1
[CTY] 4 Stars review content
[ISP] 5 stars review content
[GGL] 4 stars review content
[CTY] 3 stars review content
[YELP]5stars review content
In this example, we use the initial [ ] to track which site the review was posted on ex: [CTY] means city search, [GGL] means google, etc.
We want to be able to track the average star value on each site. So the formula for City Search would scroll across the row of reviews, pick out reviews 1 and 4 and then find the first number in each and average them. The result in this case would be 3.5
From the research we have done so far, this looks like it will require a complex array formula. How to make this formula? Is this even possible what we are trying to do?
View 5 Replies
View Related
Mar 3, 2008
I have named cells. Rw1, Clm1 and Blk1
I have the numbers 1 through 9 in cells A1:A9
I need to create formulas to find a certian number.
Example:
A2 would have the value 2
If $A$2(value 2) is in Rw1 or Clm1 or Blk1 then "" if not $A$2
View 9 Replies
View Related
Mar 6, 2008
I have this formula in columns C:D and G:F -
Try this formula. Array formulas will have curly brackets {} emcompassing the ENTIRE formula. You do not add these, you Enter the formula with Ctrl+Shift+Enter and Excel will add them (details: Array formulas). Many more Excel Formulas
=IF(ISERROR(MATCH(A1494,Jan07!A:A,0)),"",INDEX(Jan07!A:B,MATCH(A1494,Jan07!A:A,0),2))
Some of the cells end up with nothing in them. Columns E and H are the differenced of C & D and G & F respectfully. The problem is that some of the cells in E and H state #VALUE! because there isn't any data in the other columns (C2 is blank, D2 is 24, E2 is #VALUE!). If I update C2 with 0 then I receive the correct answer in E2 of -24.
I want to have a macro auto fill all blank cells (even though there is the formula in them there isn't data) with a "0". I am using the below code and it is Compile error: Type mismatch at the "True" part of the code.
Sub FindEmptyCellAutoFill()
Dim rFound As Range
With ActiveSheet.Range("C:D", "F:G")
Do
Set rFound = . Find(What:=" ", LookIn:=xlValues)
If rFound Is True Then AutoFillValue "0"
If rFound Is False Then Exit Do
Loop
End With
End Sub
View 3 Replies
View Related
Aug 6, 2014
I have a medication start end and admission date.
and i want to assign a number value of 1 to all the records that the medication start date is 2 days after the admission date. How do I do this using the ifs function.
View 3 Replies
View Related
Apr 15, 2012
We have started a new venture from 5th April & I need to create a template for a year and assign week no against the dates. The week1 will start from 5th April & week 52 will end on 31st March.
Also there will be a summary of the Week No(Starting Date & End Date) against each week at the top of the template. I could put the formula for the summary part but I am unable to figure out how to assign week no against the dates as given below. It is very difficult to assign the week no manually for the whole year & also it is vulnerable to error. a formula across B7:B23 which can deliver the desired result?
Sheet2 ABC1Week NoStart DateEnd Date2Week15-Apr8-Apr3Week29-Apr15-Apr4Week316-Apr22-Apr5 6DateDesired
Result 75-AprWeek1 86-AprWeek1 97-AprWeek1 108-AprWeek1 119-AprWeek2 1210-AprWeek2 1311-AprWeek2 1412-
AprWeek2 1513-AprWeek2 1614-AprWeek2 1715-AprWeek2 1816-AprWeek3 1917-AprWeek3 2018-AprWeek3 2119-
[Code] .........
View 9 Replies
View Related
Jun 4, 2008
I'm currrently using column I and col J
in col I are all the units of measurement: KG, PKT, BAG
in ColJ is the formula to return:
KG as 9999999
PKT as 8888888
BAg as 7777777
if(i2=kg, 999999999,"false!")
i was thinking of using if....but triple if formulas would be long isn't it?
PART2 of this would be using:
=IF((SUMPRODUCT(--(db!$A$2:$A$36000=$B$1),--(db!$F$2:$F$36000=C$5),--(db!$G$2:$G$36000=C$6),--(db!$E$2:$E$36000=$A7),--(db!$D$2:$D$36000=$B7),db!$I$2:$I$36000))=9999999,"KG","Invalid")
to check 5 values and if it is 999999999 it'll return KG
8888888 PKT
7777777 BAg
View 9 Replies
View Related
Sep 10, 2009
I need to count the number of times a value appears in a row and assign a number that tells which occurence of the text it is.
For example
Name Address
Jim 123 Smith Street
Jane 123 Smith Street
Bob 543 Apple Street
Mary 543 Apple Street
I would like a way to insert a column that puts a 1 next to Jim and a 2 next to Jane, a 1 next to Bob and a 2 next to Mary and so on.
Ultimately, I want to sort the list and delete all the twos, thus deleting the duplicate address entry.
View 9 Replies
View Related
Oct 28, 2011
I'm looking for another excel game changer (for the work I do anyway).
I have a dollar amount, and I want to know if any combination of dollar amounts in a particular range of cells will equal that dollar amount. Is this possible in Excel?
Example: I have 20 different dollar amounts in a column. I want to know what combination of those 20 different dollar amounts, if any, will equal $257.97. The dollar amount I'm looking for and the numbers in the range will change with each use. I'm hoping for a formula, but VBA will work too as I could just make a template and copy / paste the numbers in.
View 6 Replies
View Related
Mar 6, 2014
I need to find the cells that are greater than 48 and then find the average of this number.
Is there a formula that could put this together?
Average if greater than 48.xlsx
View 1 Replies
View Related
May 8, 2009
I'm trying to use the .Find and .FindNext functions to find how many cells in Worksheet("WAS") have the same value as the ActiveCell (B3 in this case) on the Worksheet("DDS"). Basically i'm just trying to figure out how many times this sub goes through the Do While loop. However, "tick" keeps coming back as a value of 1. I know there's something I must be doing wrong or something i'm not allowed to do but i'm still pretty new at this.
View 2 Replies
View Related
Jun 6, 2013
I have found ways to count cells but what I am trying to do is in column F I have a list of meeting topics, and sometimes these repeat in a year. in my drop down menu I have all of them listed however my supervisor wants me to add a count after the meeting number in the 1_1X format where x is the number of times a topic has been used.
The output will be added to my macro here
Code:
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Dim y As String
Dim z As String
Dim b as Integer
If Target.Cells.Count > 1 Then Exit Sub
If Intersect(Target, Range("MEETINGNUMBER")) Is Nothing Then Exit Sub
[Code] .......
View 3 Replies
View Related
Apr 29, 2014
I have 379 sample identities in my Excel spreadsheet in A2:A380. I want to randomly assign a number from 1-5 to each of these.
View 1 Replies
View Related
May 9, 2006
I have figured out how to assign a letter grade to a number, but am having trouble assigning it the other way, a number to a letter grade. For instance: If a student gets an A, I want the column next to it to indicate that the A represents a 4; a B represents a 3; a C represents a 2; D a 1; and F a 0. This will allow an easy grade point average calculation.
A 4 History
C 2 Math
A 4 English
B 3 Physical Ed
D 1 Science
GPA 2.80
View 3 Replies
View Related
Mar 4, 2008
I have a long list of items. I would like to assign the same number to each of the replicates. I've been trying to expand on this: = COUNTIF($A$1:A1,A1). which increments the number for each replicate, but don't seem to be getting anywhere. The attached file might make it clearer what I'm after.
View 3 Replies
View Related
May 21, 2014
Im trying to pull together a formula to achieve the below. What i have is a spreadsheet to be used by staff in different countries so im looking to make it easy to modify the categories used without the user needing to do anything complex with formulas.
The right hand side of my file (C:E) shows a code for each year we have covered a country with the year as a prefix (2014 - Blah). The left (A:B) is a summary showing the latest year we covered that country.
Current formula:
{=IF(COUNTA(C2:D2)<=0,"","✔-"&MAX(LEFT(C2:D2&"0",4)*1))}
The current formula works fine if you set the columns to where the data actually is but for ease of use i need it to look at the data in rows 1:2 and match up the Continent/Country and then MAX the dates.
View 1 Replies
View Related
Feb 11, 2013
How to find out the number of cells in a range containing dates less than a specified date.
View 4 Replies
View Related
Jun 10, 2013
I want to find the total number of times the number 1 appears in cells B2 to B33.
In each cell I have codes such as 4919409382a, 5021193035v and so on.
I have tried =COUNTIF(B2:B33,"1") but just get 0 returned.
View 3 Replies
View Related
Dec 23, 2013
Userform2 is popped up from another userform3.
How can I have userform 3 when clicked fill in a textbox on userform2 and then finally assign it to cell F3 on my worksheet.
VB:
Private Sub CommandButton2_Click()End Sub
So I need commandbutton2 (which needs to retain a value of 1` when clicked ) on Userform3 to assign the value of 1 to TextBox44 (Which is using control Source F3 so the value here ends up in F3
VB:
Private Sub TextBox44_Change()
If TextBox44 > 5 Then
MsgBox "Your entry must be part between 1 and 5", vbCritical
Exit Sub
End If
End Sub
View 2 Replies
View Related
Feb 28, 2009
I need to assign to a variable, the total number of text entries in col. A (or alternatively in a named range).
View 5 Replies
View Related
Apr 27, 2009
Excel 2003: I need code that, when an "x" is entered in a cell in the "Activity" worksheet to assign a temporary unit #, it will look for the next available Temporary Unit # in the "Assign" worksheet. Then mark that unit # as "assigned" (by placing an "X" in the column next to it) and copy it to a cell in the "Activity" sheet.
I will be doing the same thing with assigning different types of PO numbers. I figure if I have the code for the Unit #, I can use the same logic for the other assignments, with some modifications, of course.
I've attached a sample workbook.
If I am not considering the most effective way to accomplish what I am trying to do here, I have no ego at all about someone suggesting a better solution.
View 7 Replies
View Related
