Assign X Axis Charts Values
Sep 28, 2011
I would like to know how can I plot my x axis of a chart with the maximum and minimum value that I have in this variable. Note that my variable is no going from the lower value to the highes one, it is random. So what I did is to use the autoscale of the chart, but it is not working as I would like. Any solution?
The code that I use is:
Code:
' TO GET THE INITIAL and FINAL VALUE and the STEP
Worksheets(wsheet(27)).Activate
ActiveSheet.ChartObjects(chartName(11)).Activate
ActiveChart.Axes(xlCategory).MinimumScaleIsAuto = True
ActiveChart.Axes(xlCategory).MaximumScaleIsAuto = True
ActiveChart.Axes(xlCategory).MajorUnitIsAuto = True
xScaleMin = ActiveChart.Axes(xlCategory).MinimumScale
xScaleMax = ActiveChart.Axes(xlCategory).MaximumScale
xScaleStep = ActiveChart.Axes(xlCategory).MajorUnit
'After I use them (xScaleMin,xScaleMax,xScaleStep) for several charts, in this way:
ActiveSheet.ChartObjects(chartName(11)).Activate
ActiveChart.Axes(xlCategory, xlPrimary).AxisTitle.Text =VarName
ActiveChart.Axes(xlCategory, xlPrimary).AxisTitle.Select
ActiveChart.Axes(xlCategory, xlPrimary).AxisTitle.Font.Size = 11
ActiveChart.Axes(xlCategory).MinimumScale = xScaleMin
ActiveChart.Axes(xlCategory).MaximumScale = xScaleMax
ActiveChart.Axes(xlCategory).MajorUnit =xScaleStep
' but if my data was between 50 and 250 it is plotting between 0 and 300
View 2 Replies
ADVERTISEMENT
Apr 1, 2009
Is there a way to limit the range of values on the Y-Axis on the lower end? Like I don't wish the Y-axis to begin from 0 but say 500. Is that possible?
I have a set of data values ranging from 650 - 850, but the Excel graph however looks too fine because the Y-axis begins from 0.
View 6 Replies
View Related
Feb 8, 2009
Two questions:
1) How do make values on x-axis as words? E.g. apples, oranges, etc.
2) Is it possible to have the numbers on x-axis in descending order? If I can figure out 1), I can do this as well, but it would be nice to know if it is possible to have the numbers on x-axis in descending order.
View 8 Replies
View Related
Jan 26, 2009
I recently started keeping a new chart to track several different stocking measures. After running the data this morning, I noticed my horizontal axis had blank position holders for data over the weekend. How would I set the chart so that if there is no data in my data range, it doesn't put a place holder in the axis? Sample attached.
View 4 Replies
View Related
Jan 24, 2008
I am trying to create a spreadsheet with a chart to show gas consumption in our house.
I have sufficient data to produce the standard "S" curve for a 12 month period and would like to be able to have one chart with the standard "S" curve on it plus a curve of progress in the year to date of gas used so that an instant comparison between planned and actual usage can be made.
The problem is that the 2 curves require a different X axis. The standard "S" curve has an X axis that is 12 months long whereas the current one is as long as it is from the start of the year being measured. Both curves will have data inputs on different dates in the year.
View 9 Replies
View Related
Sep 10, 2012
I have a combination column and line chart with the line series on the secondary axis. Is there a way that I can tell excel to scale the secondary axis so as the line always appears above the columns? As it is it appears above in most instances but sometimes appears below the columns.
View 2 Replies
View Related
Feb 19, 2013
I have the following two bar charts. (see links below). I would like to overlay both these bar charts together and obtain the chart shown in link 3.
For example, at 4.4 GHz and 1.8m antenna, two values (downtime/year) are possible 15 min or 557min. This is represented in the third figure Since the first chart contains small values and the second chart contains large values for the x-axis, will I able to change this to log scale for ease of analysis?
[URL]
View 1 Replies
View Related
Oct 4, 2013
There is POLICY statement that determine an what ACTION should be applied to a paticular building given a score for "LIFE" & "RISK" which results in varing policies A-D. (The Policy intervention points differs slightly for varing types of building. This excel sheet works just fine, and provides the correct guidance for our engineers by suggesting Policy A-D on input of tbuilding type and LIfe/Risk score. However the Policy is a guide, and they do need to apply a level of judgement with the data close to intervention points.
My Question,
I would like to provide further graphical representation to aid decision making. I have a graph plots the X Axis ( LIFE) 0-100, and y Axis (risk) 0-5 and show the , but what i need to be able to do is dynamically adjust the position where the x&y axis cross, so showing visually the intervention point when different building types are selected.
View 1 Replies
View Related
Jul 28, 2009
Produce a chart (not a problem) that can be updated should the length of the X and Y data change?
This may not even need to be a macro, if it is possible to have a chart whose X and Y axis updates depending on the contents of a column?
If you search through the history of even this forum you will see quite a lot of people are looking for this solution.
View 9 Replies
View Related
Oct 23, 2007
The first data point of my chart appears cutoff along the y axis
I formatted the x-axis by clearing the check box "Value (Y) axis crosses at maximum category"
If I add the tick mark back in then my first data point does not begin at the origin.
Screen Shot attached of both cases
View 5 Replies
View Related
Jan 16, 2014
I have a excel with data values in 5 different columns.
Column A: Time in seconds (1,2,3,4,5.... so on) continuously in equal intervals.
Column B: Values Generated by my machine at each second (random values)
Column C: Values generated based on column B using a formula (Let formula be denoted by " F ").
Column D: Highest possible value of calculation on column B (With +ve error consideration in formula "F")
Column E: Least possible value of calculation on column B (With -ve error consideration in formula "F")
Two graphs need to be generated as follows:
Graph 1:
X Axis: time values ( From Column A )
Y Axis: Corresponding machine generated values from Column B
Graph 2: Envelope
X Axis: time values ( From Column A )
Y Axis: Both value of column D & E ( Time value 1 sec has two corresponding values, one from Column D and one from Column E)
Both values of Column D and E be plotted and the area between two lines generated by upper limit and lower limit (Column D and E respectively)
So for both, what chart types should I select, and how do I assign that particular column to that particular axis only.
View 2 Replies
View Related
Mar 1, 2014
I have a spreadsheet with golfers handicaps, golfers names down the left in column A in rows 3-35. Row 2 has the event numbers titles 1 to 18 (18 events in a year). i need a graph that has the person as the vert axis and the horizontal axis needs to be the event numbers, so i can read down for the person and across to see how there handicaps change from each different event. i have attached the data below.
View 1 Replies
View Related
Jul 7, 2014
I have a dynamic column chart that may contain positive or negative (or both) values. The columns contain Data Labels positioned 'Outside End'.
I want to avoid the Data Labels (for the negative values) overlapping the x axis. Is there a way to do this via VBA?
I know how to update the chart axis via vba linked to cell values, but I can't figure out a formula I can use to calculate the minimum which takes into account the distance needed to avoid the overlapping problem.
View 1 Replies
View Related
Jan 19, 2012
how do you create a graph with a field such as vendors on the X-axis, but with dollar values spent on the left side of the y-axis and percentage of total dollars spent on the right side vertical axis?
View 3 Replies
View Related
Feb 24, 2009
The simplified example below is intended to calculate the sums from the data values in the upper data set and place them in the appropriate cells in the lower summary table. Example......
I would like to find a single-cell formula that will handle the multiple instances of either the X or Y headings (ex: there are two 'Yes' Rows) and still reach the appropriate summations. I would like to accomplish this without resorting to Macros or manual cell references if possible. I've acheived some limited success with array formulae so far, but find that the multiple instances of 'Yes' cause only one row to be summed before the formula finishes.
View 2 Replies
View Related
Jul 7, 2013
I'm attempting to assign 1 of 4 predetermined values to a cell based on the values of entries in another cell.
View the example attached : Value assignmts.xls
Assign the Value of 1, to (D8) when any value entered in (C9) is equal to or over 380, but less than 410.
Assign the Value of 2, to (D8) when any value entered in (C9) is equal to or over 410, but less than 440.
Assign the Value of 3, to (D8) when any value entered in (C9) is equal to or over 440, but less than 470.
Assign the Value of 0, to (D8) when any value entered in (C9) less than 380.
View 9 Replies
View Related
Feb 28, 2014
The goal of this chart is to show how sales are adding up relative to bonus levels for the month. The problem for me is in getting the right axis tick marks, labels and chart lines to match the values in Columns C and D. This need may be further complicated because the target amounts increase by a fixed percentage (11% in this sample, but it can vary).
View 4 Replies
View Related
Mar 15, 2012
I have data that starts from say, 17:50 hours. However, I would like the chart to start from 00:00 to 00:00 so it is a full 24-hour period. So up to 00:00 to 17:50 hours, it would be blank then the data will be plotted from 17:50. How do I do this? If I select the existing data from 17:50 and ask Excel to create a chart, the x axis starts from 17:50 (not 00:00).
View 4 Replies
View Related
Jul 6, 2012
I have to sets of values that I have graphed....number and dollar amount.
The dollar amount is in the hundreds of thousandths and the number is in the hundreds. I want to have two verticle axis. one on the left hand side for the dollar and one on the right side for the number.
View 1 Replies
View Related
Oct 27, 2006
I am not sure of the best way to ask how to do this. I am trying to efficiently lookup the X value in sheet A from the Y value in sheet B programatically as X=Y. The Values along the X and Y axis of sheet A change.
Sheet A...............................................
View 4 Replies
View Related
Apr 3, 2014
[Code]......
Whenever I make graph with this code it takes column A values and makes a line of it on graph...What i want is that it should be always on X-axis as reference and not a line on the graph.
View 1 Replies
View Related
Dec 3, 2011
I am trying to make a chart based on the following values (for example) The X axis values are week numbers, the chart X axis must stop at Week 4, the data range still contains all these cells, but the chart will only show cells with values, If i'll put a value in Week 5, the chart will auto-expand itself to include week 5 too.
Code:
Week # | Value
Week 1 | 1
Week 2 | 2
Week 3 | 3
Week 4 | 4
Week 5 |
Week 6 |
View 3 Replies
View Related
Mar 18, 2013
I'm trying to plot a function with specific values marked on the X axis (or at least distributed according to the said values). Namely, I have something like this:
And while it does plot the Y's as I want them to be plotted, X'es are just used as labels, which causes 0 and 100 to be equally apart as 933,9 and 944. How can I plot it, then, so that I simply select my desired Y values, their corresponding X values and get the plotted function?
View 2 Replies
View Related
Jan 30, 2009
i want to set the minimum to be 20 less than the minimum value in the data, and the max to 20 more than the max value of the data.
View 9 Replies
View Related
Jul 21, 2014
I am using a ComboBox on a worksheet where the items in that box are pulled from Sheet1A:A. When the selection of the item in the comboBox is made, I would like several textboxes on that same page to be auto-populated based upon info derived from cells adjoining whatever row in Column A was chosen on Sheet 1.
For simplicity sake, let's say the range on Sheet 1 is A:H, and TextBox1 = "B", TextBox2= "C", etc.
so if,
A B C D
JOHN 15 DOGS BLUE
SUE 18 CATS RED
BOB 20 TURTLES YELLOW
When Combobox selection is JOHN, I want TextBox1= "15" TextBox2= "DOGS" TextBox3= "BLUE"
View 2 Replies
View Related
Jun 29, 2014
I am trying to make a macro that when clicked, will randomly choose one of 7 values and type that into cell C4. Values can be Dodgeball, Football, Soccer, Tetherball, Soccer, Baseball, Basketball. Is this doable?
View 9 Replies
View Related
Dec 28, 2007
I have a large excel sheet with the following format:
ColA ColB ColC...
55430 4 45
55431 5
55432 4 7 25 36
...
and i need to convert it as...
ColA ColB
55430 4
55430 45
55431 5
55432 4
55432 7
55432 25
55432 36
View 9 Replies
View Related
Feb 18, 2008
Assign values to ratio buttons
I have created a UserForm in Excel, to gather data for a questionnaire.
For each question, the user must select an answer from a radio button (Yes, No and N/A)
When I add the record (answers) to the sheet1, the results are shown as all being false.
I want to show either ‘Yes’ or ‘No’ or ‘N/A’
Private Sub CommandButton2_Click():
Dim LastRow As Object
Set LastRow = Sheet1.Range("a65536").End(xlUp)
LastRow.Offset(1, 1).Value = UserForm1.OptionButton1.Value
LastRow.Offset(1, 1).Value = UserForm1.OptionButton2.Value
LastRow.Offset(1, 1).Value = UserForm1.OptionButton3.Value
End Sub
View 9 Replies
View Related
Sep 15, 2008
I have an issue with some excel spread sheet I am working on.
I am using Macros, Buttons to assign values to a text box.
When I do not protect the worksheet no problems.
When I include my calculation sub into my Worksheet Change module.
It sort of works but flashes a lot, and takes about 6 or more seconds.
When I dont include it in the Worksheet change module it doesn't flash and seems to work fine.
When I protect the work sheet, in my code I unprotect it and try to run my code, but it wont go through. I get an error.
Run-Time error '1004': Application-defined or object-defined error
Worksheet Module
Option Explicit ' Force the declarations of all variables in this module
Private Sub Worksheet_Change(ByVal Target As Range)
'Unprotect
'Call Calculate_Decision
If Range("MoreBorrowers") = "Yes" Then
Rows("21:27").Hidden = False
Else
Rows("21:27").Hidden = True
End If
If Range("GuaranteeYN") = "Yes" Then
Rows("159:167").Hidden = False
Else
Rows("159:167").Hidden = True
End If
I have tried adding in the Me. before my Range but nothing seems to work.
View 9 Replies
View Related
Jan 15, 2009
I want to assign a cell a formula that changes base on variable, example
myVar=3
Cell(1,1).value = "=average(1:{myVar})"
what do i do to make this work instead of {myVar}?
View 9 Replies
View Related
