The first data point of my chart appears cutoff along the y axis
I formatted the x-axis by clearing the check box "Value (Y) axis crosses at maximum category"
If I add the tick mark back in then my first data point does not begin at the origin.
Screen Shot attached of both cases
In the attached document is a timeline made from a scatter chart. Error bars using custom values are used to show the length of each task, however I can't get the chart to include error bars for the last 2 data points (tasks).
View 1 Replies View RelatedProduce a chart (not a problem) that can be updated should the length of the X and Y data change?
This may not even need to be a macro, if it is possible to have a chart whose X and Y axis updates depending on the contents of a column?
If you search through the history of even this forum you will see quite a lot of people are looking for this solution.
I have a dynamic column chart that may contain positive or negative (or both) values. The columns contain Data Labels positioned 'Outside End'.
I want to avoid the Data Labels (for the negative values) overlapping the x axis. Is there a way to do this via VBA?
I know how to update the chart axis via vba linked to cell values, but I can't figure out a formula I can use to calculate the minimum which takes into account the distance needed to avoid the overlapping problem.
I recently started keeping a new chart to track several different stocking measures. After running the data this morning, I noticed my horizontal axis had blank position holders for data over the weekend. How would I set the chart so that if there is no data in my data range, it doesn't put a place holder in the axis? Sample attached.
View 4 Replies View RelatedI am trying to create a spreadsheet with a chart to show gas consumption in our house.
I have sufficient data to produce the standard "S" curve for a 12 month period and would like to be able to have one chart with the standard "S" curve on it plus a curve of progress in the year to date of gas used so that an instant comparison between planned and actual usage can be made.
The problem is that the 2 curves require a different X axis. The standard "S" curve has an X axis that is 12 months long whereas the current one is as long as it is from the start of the year being measured. Both curves will have data inputs on different dates in the year.
Is there a way to limit the range of values on the Y-Axis on the lower end? Like I don't wish the Y-axis to begin from 0 but say 500. Is that possible?
I have a set of data values ranging from 650 - 850, but the Excel graph however looks too fine because the Y-axis begins from 0.
I would like to know how can I plot my x axis of a chart with the maximum and minimum value that I have in this variable. Note that my variable is no going from the lower value to the highes one, it is random. So what I did is to use the autoscale of the chart, but it is not working as I would like. Any solution?
The code that I use is:
Code:
' TO GET THE INITIAL and FINAL VALUE and the STEP
Worksheets(wsheet(27)).Activate
ActiveSheet.ChartObjects(chartName(11)).Activate
ActiveChart.Axes(xlCategory).MinimumScaleIsAuto = True
ActiveChart.Axes(xlCategory).MaximumScaleIsAuto = True
ActiveChart.Axes(xlCategory).MajorUnitIsAuto = True
xScaleMin = ActiveChart.Axes(xlCategory).MinimumScale
xScaleMax = ActiveChart.Axes(xlCategory).MaximumScale
xScaleStep = ActiveChart.Axes(xlCategory).MajorUnit
'After I use them (xScaleMin,xScaleMax,xScaleStep) for several charts, in this way:
ActiveSheet.ChartObjects(chartName(11)).Activate
ActiveChart.Axes(xlCategory, xlPrimary).AxisTitle.Text =VarName
ActiveChart.Axes(xlCategory, xlPrimary).AxisTitle.Select
ActiveChart.Axes(xlCategory, xlPrimary).AxisTitle.Font.Size = 11
ActiveChart.Axes(xlCategory).MinimumScale = xScaleMin
ActiveChart.Axes(xlCategory).MaximumScale = xScaleMax
ActiveChart.Axes(xlCategory).MajorUnit =xScaleStep
' but if my data was between 50 and 250 it is plotting between 0 and 300
I have a combination column and line chart with the line series on the secondary axis. Is there a way that I can tell excel to scale the secondary axis so as the line always appears above the columns? As it is it appears above in most instances but sometimes appears below the columns.
View 2 Replies View RelatedI am attempting to create simple charts to show survey results 2005 v 2006. I have a single series in a bar chart - chart type. The wizard initially makes both bars the same fill color. I right-clicked one of the bars to start the Format Data Series Wizard. On the 5th tab, "Options", I ticked "Vary Colors By Point". A new color was assigned to the top or first bar. So far so good. But instead of these colors, I would like to use a different fill effect for each data point in the series
So I walk through the wizard and desiqn a fill effect and click ok. The fill effect is assigned to both data points. I checked where I had ticked "Vary Colors By Point"
It is still ticked. Can I override this somehow so that each data point can have a unique fill effect?
I have the following two bar charts. (see links below). I would like to overlay both these bar charts together and obtain the chart shown in link 3.
For example, at 4.4 GHz and 1.8m antenna, two values (downtime/year) are possible 15 min or 557min. This is represented in the third figure Since the first chart contains small values and the second chart contains large values for the x-axis, will I able to change this to log scale for ease of analysis?
[URL]
There is POLICY statement that determine an what ACTION should be applied to a paticular building given a score for "LIFE" & "RISK" which results in varing policies A-D. (The Policy intervention points differs slightly for varing types of building. This excel sheet works just fine, and provides the correct guidance for our engineers by suggesting Policy A-D on input of tbuilding type and LIfe/Risk score. However the Policy is a guide, and they do need to apply a level of judgement with the data close to intervention points.
My Question,
I would like to provide further graphical representation to aid decision making. I have a graph plots the X Axis ( LIFE) 0-100, and y Axis (risk) 0-5 and show the , but what i need to be able to do is dynamically adjust the position where the x&y axis cross, so showing visually the intervention point when different building types are selected.
Two questions:
1) How do make values on x-axis as words? E.g. apples, oranges, etc.
2) Is it possible to have the numbers on x-axis in descending order? If I can figure out 1), I can do this as well, but it would be nice to know if it is possible to have the numbers on x-axis in descending order.
I have a data set that is a spectrum of (y)intensity vs (x)energy I was wanting to add an additional X axis at the top of the graph showing the wavelength conversion for the energy value, is that possible in excel? and if so how?
View 1 Replies View RelatedI have a pivot table as shown below which is pretty straight forward however I am trying to create a macro that will automatically change the point name to match the point name in column E then copy that resulting dispaly to another sheet then pick the next point name in line and do the same thing and repeat for 50 rows, so my end result will be 50 pivot tables ready for printing. I can do this manually but I am trying to make it automatic...BTW the point names in column E change everyday but the pivot table supports the name changes.
Option Explicit
Sub PointName()
Dim Ws As Worksheet
Dim Rng As Range, Cel As Range
Set Ws = ActiveSheet
Set Rng = Range(Cells(2, 7), Cells(Rows.Count, 7).End(xlUp))
For Each Cel In Rng
Ws.PivotTables("PivotTable1").PivotFields("Point Name").CurrentPage = Cel & " "
Ws.Columns("A:B").Copy
Sheets.Add
With ActiveSheet
.Paste
.Name = Trim(Cel)
.Range("A1").Select
End With
Next
Ws.Activate
End Sub
I turned it off for a while and when I turned it back on I am getting an error
Unable to set the _Default property of the PivotItem class
Debugger is highlighting
Ws.PivotTables("PivotTable1").PivotFields("Point Name").CurrentPage = Cel & " "
I have a spreadsheet with golfers handicaps, golfers names down the left in column A in rows 3-35. Row 2 has the event numbers titles 1 to 18 (18 events in a year). i need a graph that has the person as the vert axis and the horizontal axis needs to be the event numbers, so i can read down for the person and across to see how there handicaps change from each different event. i have attached the data below.
View 1 Replies View RelatedI've put together code to construct a chart
It all works fine but I've noticed an odd quirk which I can't explain nor can I seem to fix. Here's the (reduced) code :
Code:
Dim appExcel As Object ' Excel Application
Dim chtPareto As Object ' Chart
Set appExcel = CreateObject("Excel.Application")
Set chtPareto = appExcel.Charts.Add
With chtPareto
' Primary category axis
[code]....
The category (x) axis title should be horizontal, whereas the value (y) axis title should be rotated. Stepping through the code, when I .SetElement for the category axis title, it appears horizontal as planned. However, as soon as I .SetElement for the rotated value axis title, the category axis title also rotates.
I have some numeric data that has to be put on a log chart. but there is no option for log charts. so i converted my data to log and then drew a chart but i am unable to edit the axis intervals and starting axis value. whenever i change the value it gets back to its default value,ie 1. can anyone tell me how to draw log chart or how to edit axis intervals and starting axis value?
View 6 Replies View RelatedPivot Chart. I would like to set up something to where a user can click on an individual value on a pivot chart (currently a line chart set up with 4 data series) and somehow display some underlying data. I have a lot of information stored in a data worksheet that I can't display all at once, but if a user sees a questionable data point, he/she can click and learn more about it from source data, or even a new query of the data worksheet.
I am using Excel 2010
I want to use a Pivot table to filter data to show just the studies that contain patients from the 'South' area?
As per example below I want to be able to see all the patients in all areas but only for studies that have patients from the south. I put together an array formula that works well for small tables but is too much with one one my sheets that contains 200,000 rows.
Before filtering:
Study ID
Study Short Title
Study Patient ID
Area
1346
LLP
90126
Northwest
[code]....
I need to create a graph with a 2 x axis and a single y axis. For example:
Pressure ( PSIA) Solubility (mol %) Velocity (m/s)
200 0.024 1
300 0.036 1.2
400 0.041 1.8
I need the two x axis to be pressure and solubility and the y axis to be velocity, with the data being demonstrated by a single plot (I have only managed it with two plots which does not demonstrate solubility's relationship to pressure ).
For example at a pressure of 200 PSIA (lower x-axis) and solubility of 0.024 mol % (upper x-axis) velocity was found to be 1 m/s.
If I have columns A-F and the 1st time a number appears in that row I want to know the column number, so if the first time a number appears in column 'C' I want it to return 3.
View 9 Replies View RelatedI am trying to reproduce a graph similar to this: [URL] ....
How to get the Y axis in the center and two distinct bar charts on either side.
Sample data can be found here: [URL] ....
how to incorporate another category and value axis to my existing chart.
1. I need to add a rank axis derived from my data column (C6-C15). This column should rank from highest to lowest and create a tie if any number is repeated. I have arranged the rank column in cells B38:L38 as they would appear. I would like this to appear on the top or bottom of the bar graphs.
2. Second I need to add the frequency of hits which = 3 derived from cell J1 This should appear on the chart were it is currently titled. This should create another bar graph colored green and labeled 3.
3. Lastly the numbers axis can remain the same as it appears on the chart or if it would be better to align as shown in cells B43:L43.
What is the best way to have both horizontal and vertical axis as value axis?
View 2 Replies View Relatedis there any way to use the right function to return any data to the right of the decimal point?
eg 117.22 would be .22
108.1225 would be .1225
102.358 would be .358 etc
If I check the box labeled catagory name on the intial creation or within chart options on the right click menu each data point gets labeled with the name of the catagory.
I would like to label a significant event at one of these data points does anyone know how to do this? If this isn't a built in feature does anyone have a work around that would look good?
I have a table with two columns.
PartNumLoaction
CCN01905J6
CCN01905J100
CCN01905J200
CCN01905J300
CCN01905J400
CCN04455J800
CCN05363J3
CCP01960C1
CCP01960C3
I would like to create another table (in a new sheet) which displays the number of times each PartNum appears in the first table.
PartNumQTY
CCN019055
CCN044551
CCN053631
CCP019602
The amount of rows in a table is variable and can reach thousands of rows.
I'm looking to change raw data into a "point" system. One of my value exchanges is every $1,000 equals 5 points. So if cell A1 equals $4,685 I am looking for cell A2 to give me a value of 20. (5pts times 4 increments of a $1k) The point value only changes at the $1k milestones, so the remaining $685 does not change the point value. What would the formula look like for something like this?
View 3 Replies View RelatedI have 100 rows and 100 columns, where row 1 is dates, and column A is times, and within are numbers. On a second sheet I have a column (A) with random dates and another (B) with times. What I need is a third column (C)on the second sheet that looks at the date and time, finds the intersection on the first sheet, and returns the number found there.
View 14 Replies View Related
