Charts - Dynamic Change Of Where X And Y Axis Cross
Oct 4, 2013
There is POLICY statement that determine an what ACTION should be applied to a paticular building given a score for "LIFE" & "RISK" which results in varing policies A-D. (The Policy intervention points differs slightly for varing types of building. This excel sheet works just fine, and provides the correct guidance for our engineers by suggesting Policy A-D on input of tbuilding type and LIfe/Risk score. However the Policy is a guide, and they do need to apply a level of judgement with the data close to intervention points.
My Question,
I would like to provide further graphical representation to aid decision making. I have a graph plots the X Axis ( LIFE) 0-100, and y Axis (risk) 0-5 and show the , but what i need to be able to do is dynamically adjust the position where the x&y axis cross, so showing visually the intervention point when different building types are selected.
View 1 Replies
ADVERTISEMENT
Jun 27, 2013
My DB is in table format . I use this table as source data for 2 barcharts and 1 pie chart.Following are my table headers
Costs|exp heads|Month1|Month2|...|Month n|Spark lines|Average
When i add a month coloumn,Sparklines and Average coloumn should get updated automaticaly.Now this is not happening even if the data is in table format.I also want the graphs to be automaticaly updated.
View 2 Replies
View Related
Jan 26, 2009
I recently started keeping a new chart to track several different stocking measures. After running the data this morning, I noticed my horizontal axis had blank position holders for data over the weekend. How would I set the chart so that if there is no data in my data range, it doesn't put a place holder in the axis? Sample attached.
View 4 Replies
View Related
Jan 24, 2008
I am trying to create a spreadsheet with a chart to show gas consumption in our house.
I have sufficient data to produce the standard "S" curve for a 12 month period and would like to be able to have one chart with the standard "S" curve on it plus a curve of progress in the year to date of gas used so that an instant comparison between planned and actual usage can be made.
The problem is that the 2 curves require a different X axis. The standard "S" curve has an X axis that is 12 months long whereas the current one is as long as it is from the start of the year being measured. Both curves will have data inputs on different dates in the year.
View 9 Replies
View Related
Apr 1, 2009
Is there a way to limit the range of values on the Y-Axis on the lower end? Like I don't wish the Y-axis to begin from 0 but say 500. Is that possible?
I have a set of data values ranging from 650 - 850, but the Excel graph however looks too fine because the Y-axis begins from 0.
View 6 Replies
View Related
Sep 28, 2011
I would like to know how can I plot my x axis of a chart with the maximum and minimum value that I have in this variable. Note that my variable is no going from the lower value to the highes one, it is random. So what I did is to use the autoscale of the chart, but it is not working as I would like. Any solution?
The code that I use is:
Code:
' TO GET THE INITIAL and FINAL VALUE and the STEP
Worksheets(wsheet(27)).Activate
ActiveSheet.ChartObjects(chartName(11)).Activate
ActiveChart.Axes(xlCategory).MinimumScaleIsAuto = True
ActiveChart.Axes(xlCategory).MaximumScaleIsAuto = True
ActiveChart.Axes(xlCategory).MajorUnitIsAuto = True
xScaleMin = ActiveChart.Axes(xlCategory).MinimumScale
xScaleMax = ActiveChart.Axes(xlCategory).MaximumScale
xScaleStep = ActiveChart.Axes(xlCategory).MajorUnit
'After I use them (xScaleMin,xScaleMax,xScaleStep) for several charts, in this way:
ActiveSheet.ChartObjects(chartName(11)).Activate
ActiveChart.Axes(xlCategory, xlPrimary).AxisTitle.Text =VarName
ActiveChart.Axes(xlCategory, xlPrimary).AxisTitle.Select
ActiveChart.Axes(xlCategory, xlPrimary).AxisTitle.Font.Size = 11
ActiveChart.Axes(xlCategory).MinimumScale = xScaleMin
ActiveChart.Axes(xlCategory).MaximumScale = xScaleMax
ActiveChart.Axes(xlCategory).MajorUnit =xScaleStep
' but if my data was between 50 and 250 it is plotting between 0 and 300
View 2 Replies
View Related
Sep 10, 2012
I have a combination column and line chart with the line series on the secondary axis. Is there a way that I can tell excel to scale the secondary axis so as the line always appears above the columns? As it is it appears above in most instances but sometimes appears below the columns.
View 2 Replies
View Related
Feb 19, 2013
I have the following two bar charts. (see links below). I would like to overlay both these bar charts together and obtain the chart shown in link 3.
For example, at 4.4 GHz and 1.8m antenna, two values (downtime/year) are possible 15 min or 557min. This is represented in the third figure Since the first chart contains small values and the second chart contains large values for the x-axis, will I able to change this to log scale for ease of analysis?
[URL]
View 1 Replies
View Related
Jul 28, 2009
Produce a chart (not a problem) that can be updated should the length of the X and Y data change?
This may not even need to be a macro, if it is possible to have a chart whose X and Y axis updates depending on the contents of a column?
If you search through the history of even this forum you will see quite a lot of people are looking for this solution.
View 9 Replies
View Related
Oct 23, 2007
The first data point of my chart appears cutoff along the y axis
I formatted the x-axis by clearing the check box "Value (Y) axis crosses at maximum category"
If I add the tick mark back in then my first data point does not begin at the origin.
Screen Shot attached of both cases
View 5 Replies
View Related
Jul 7, 2014
I have a dynamic column chart that may contain positive or negative (or both) values. The columns contain Data Labels positioned 'Outside End'.
I want to avoid the Data Labels (for the negative values) overlapping the x axis. Is there a way to do this via VBA?
I know how to update the chart axis via vba linked to cell values, but I can't figure out a formula I can use to calculate the minimum which takes into account the distance needed to avoid the overlapping problem.
View 1 Replies
View Related
Feb 24, 2007
I have a spreadsheet that calculates a value for each age up to 65 on a separate row. I have parameterized the spreadsheet so that depending on the age entered by the user, any row below the age 65 calculation row is blanked out (set to "") with an if statement.
After a new age is entered I would like a line graph to compare the values. My problem is that if I select all of the possible data values (I assume none are less than 20, therefore there are 45 rows of formulas) any rows that have blank values show up in the chart. My data starts in cell A1.
I would like to come up with a macro that accomplishes the following . . .
- determines the number of the lowest row that has a number value in it (since there are formulas below this, Ctrl down does not do this correctly)
- set a named range starting from cell A1 based on x rows (calculated in the prior step) and y rows (constant)
View 9 Replies
View Related
Jul 7, 2014
I have a graph where dates are shown on the x axis. I would like the date range always to start on the date when I am updating the chart, e.g. sourced from a cell with formula =now().
View 1 Replies
View Related
Dec 3, 2011
I am trying to make a chart based on the following values (for example) The X axis values are week numbers, the chart X axis must stop at Week 4, the data range still contains all these cells, but the chart will only show cells with values, If i'll put a value in Week 5, the chart will auto-expand itself to include week 5 too.
Code:
Week # | Value
Week 1 | 1
Week 2 | 2
Week 3 | 3
Week 4 | 4
Week 5 |
Week 6 |
View 3 Replies
View Related
Aug 12, 2012
I am trying to create a horizontal bar chart with a product code data set. The number of codes will increase over time. For each product code there may it may not be a sales value and that sales value will increase over time. I am trying to plot the product codes on the y axis and sales value in the x axis.
View 3 Replies
View Related
Aug 28, 2013
We're making a dynamic chart based (picture below) on test scores from neuropsychological tests ("IQ tests"). The chart displays median, min and max scores of several tests that are clustered on the X-axis into 9 domains (each containing several tests). The Y-axis display the results in T-scores ("T-Skarer") (kind of percentile rank). The chart is dynamic. If a person only have scores around the T=50 (50th percentile), the Y-axis adapts to this (no fixed values). But what we need in addition to the T-scores on the Y-axis are z-scores (standard deviations).
My question: Is it possible to incorporate an additional dynamic Y-axis with standard deviation (next to the T-score columns)? (the z-scores are eqvivalent to percentiles, but have different values.
View 1 Replies
View Related
Jul 28, 2008
I've just read up on interactive charts and have got that sorted for my worksheet. But I have a slightly more complicated issue now...
The worksheet Logistics has results for 76 different tests and these tests have been taken multiple times. Hence, I can logically have a trendline of results for every test i.e. Test 1: 1/1, 2/2,3/3 etc...
I'll go nuts creating 76 charts...and it's a terrible messy way of getting the user to see how he's fared over the number of times he's taken a particular test.
What I'm looking for is a way for the user so indicate which test he wants to see the results for and the relevant results to come up. In other words, on choosing the trendline of results for a particular test. Possible?I saw something similar on a website but am not sure if it was relevant...
View 9 Replies
View Related
May 10, 2006
I am trying to learn how to use offsets for dynamic charts and having trouble getting the formula to pick up the correct values.
View 3 Replies
View Related
Oct 3, 2012
I am creating dynamic charts with a data sheet that is horitzonal. My x-axis : =OFFSET('chart data'$B$1,0,1,1,COUNT('chart data'$2:$2)-1), y-axis: =OFFSET('chart data'!$A$1,0,1,1,COUNTA('chart data'!$1:$1)-1). My formulas are giving me #VALUE. Not sure why.
(formatted general not as dates)
1980
1981
1982
1983
1984
1985
1986
1987
1988
CONSUMPTION
70
61
67
83
89
75
67
71
71
View 5 Replies
View Related
Oct 5, 2013
I'm running a chiropractic office. In order to see where I've been and where I'm going I keep track of things like new patient visits, patient report visits, cash in, insurance in, etc. I keep track of this on a daily basis on one worksheet. The weekly totals are paste-linked into another sheet. It is this sheet that I would like to use to create a dynamic chart however, in using the OFFSET function to create the chart, the formula counts the 'blank' cells b/c of the paste-link from the previous worksheet.
View 1 Replies
View Related
Oct 22, 2007
I have used named ranges to make a chart automatically adjust to a changing list of products in one column, but I do not know how to do this with multiple series. If I want to add products to this table, how can I make my chart dynamically adjust multiple series?
So the chart range is currently E5:H10. But I would need it to go beyond row 10 when I add new items.
Sheet1
*EFGH5*Week 1Week 2Week 36Product 11,234,123 1,258,805 1,283,982 7Product 21,234,223 1,258,907 1,284,086 8Product 33,423,321 3,491,787 3,561,623 9Product 4342,121 348,963 355,943 10Product 52,343,424 2,390,292 2,438,098
Excel tables to the web >> Excel Jeanie HTML 4
View 9 Replies
View Related
Sep 14, 2006
I have created a dynamic chart, courtesy of the Jon Peltier website. I have 2 problems. No problem with getting the chart to work, the problem comes when I delete the data. I get an error message telling me that 'A formula in the worksheet contains one or more invalid references.' The other problem is that I cannot copy the worksheet to another worksheet in the same workbook. Well that is not strictly true, I can copy it but it wont updat. Any ideas as to how I can overcome this? Any suggestions welcome, apart from 'Don't delete the data then'
View 9 Replies
View Related
Dec 22, 2006
i want to create dynamic Excel Charts in one sheet ,The sheeet contain dynamic columns and rows and i want to create for each 4 columns a chart in a new sheet ,i started to try it in VBA and didnt founs the way to select 4 columns as a range, i succeseed to do it with msgboox that the user enter the range but i want to do it in a loop
View 9 Replies
View Related
Feb 6, 2008
I have a Defined Dynamic Name which is used to select my data. How do I call that when I create a chart in excel within the data source, so that the data source always refers to this dynamic range.
I have data A B C D E
1 2 3 4 5
9 4 5 6 7
this is so the series names will be the row and for each series the rows represent the data within each of the columns. I have a dynamic range that always selects the whole range called chartdata. How do I put that in the data source when it asks me in Excel 2007 as there is no wizard for seprate x and y ranges in this version.
View 4 Replies
View Related
Mar 2, 2013
building dynamic charts and filters, so What I'm hoping to accomplish to build a bar chart that looks like the following:
________________________________________________
Filter: State | Filter: Region | Filter: Segment |
Revenues |||||||||||||||| + (% of Total Rev)
COGS ||||||||||| + (% of Total COGS)
Margin |||| + (% of Total Margin)
-------------------------------------------------------
My data is built in the following format on a different tab than the proposed chart:
State: | Region: | Segment: | Account: | Amount: |
MN | Midwest | Major | Revenues | $$$
MN | Midwest | Major | COGS | $$$
MN | Midwest | Major | Margin | $$$
MN | Midwest | Major | % of Total Revenues | %%%
MN | Midwest | Major | % of Total COGS | %%%
MN | Midwest | Major | % of Total Margin | %%%
[Code] ........
It seems like it'll be easy to use a pivotchart, but at the same time, there's a lot of formatting to do, which makes it tricky, especially if I have many states to deal with and the multiple combinations.
View 4 Replies
View Related
Jul 5, 2006
I am using defined names to build a chart. This is working fine, but I also would like to use a defined name to control the +/- fields for the error bars. The defined names I have set up are correct, and I am able to enter them into the sorce data form but Excel does not display them.
View 9 Replies
View Related
Feb 8, 2009
Two questions:
1) How do make values on x-axis as words? E.g. apples, oranges, etc.
2) Is it possible to have the numbers on x-axis in descending order? If I can figure out 1), I can do this as well, but it would be nice to know if it is possible to have the numbers on x-axis in descending order.
View 8 Replies
View Related
Nov 2, 2013
I'm trying to dynamically populate ranges to facilitate dynamic charts being generated.
I use excel 2010 at work, and 2011 for mac at home.
Dynamic chart ranges populated from named ranges as selected in nested indirectly sourced validation lists
I want any selection made in a dependent validation list which contains a list of named ranges to trigger a worksheet_change event which copies the range the selection points to and pastes it into a dynamic range in another column, beginning as a specified cell.I've tried using this, put together from some code examples from similar, but different issues.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Me.Range("B2")) Is Nothing Then
Range(Range("B2").Value).Copy
Range("P2").Paste
End If
End Sub
Trouble is, I don't really understand this code. It doesn't appear to do anything when I make a worksheet change in "B2", but I don't know exactly what it is. I suspect that perhaps the fact that "B2" is validated from an indirect source might be difficult?
View 8 Replies
View Related
Nov 1, 2006
I have a large database with names down the left and numbers across the top. I want to "tilt" the entire table so that the names run across the top and the numbers run down the left side while keeping all the data together.
Example:
from this:
a b c d e f
1
2
3
4
5
to this:
1 2 3 4 5
a
b
c
d
e
f
View 3 Replies
View Related
May 6, 2014
Please see the attached workbook.
I would like to create a bar chart which is linked to a drop down box (from data validation) that allows me to choose of the 3 sets of data to show in the x axis.
So if i choose "HALF YEAR", the bar chart will have two bars (one is "jan-jul" the other is "jul-dec") with the green section data if i choose "QUARTER YEAR", the bar chart will have four bars ("jan-mar", "apr-jun", "jul-sep", "oct-dec") with the blue section data if i choose "INDIVIDUAL MONTHS" i have twelve bars....with the red section data.
View 2 Replies
View Related
