G:G contains a list of integars, though some cells are blank; lets say 75 of the 100 cells in data range are < 0. I want a macro which copies a range where the number of rows = the number of values in G:G. my Macro:
Sub myMacro()
Dim rowRange As Integer
rowRange = Count("G:G")
End Sub
This, as you guessed, comes back with an error. Sub or Function not defined. Anyone the proper syntax for assigning a formula to a variable?
to assign a variable to equal a Constant variable, then I need to find the last unused row on the worksheet, then paste that variable down the column (1-12200 or so rows). I also need to assign Strings for the first two Rows in the target column.
The MsgBox's are merely for debugging. When the code above runs, the first MsgBox I receive states similar to: "vSh 14.238964 vOp 45.23 vCash 1000" The second MsgBox, from after the multiplication, states: "vCash 1000"
For some reason the vCash variable just will not set. At the beginning of the code, I declared each variable as Dim var, meaning as a variant, and whenever I debug by halting during a MsgBox display, each of the variables appear to be the same types: Variant/Double.
I am trying to open a workbook, assign it a variable and use that variable later. here is what i have
[Code] ......
When I try to activate it later on in another procedure using:
[Code] copy to clipboard
I receive an "Automation Error"
I have tried declaring it as a public variable, even a global variable and cannot get this to work.
All I'm really wanting to do is open a workbook (where the name will change depending on the book being opened), assign that workbook a variable name, and use it later in the code.
I’m attempting designate the cell which will then determine the start of the current region, to be copied and pasted to another sheet. I’m receiving an “ERROR 1004” , Method Range of object_ Worksheet Failed.
Ive wrote some code that goes into a workbook. This code then opens up a "master" workbook which has 18 blank tabs in it and then proceeds to open up 18 other named workbooks one at a time and copy some date from these workbooks to the master (i.e workbook 1's data goes to the master workbook on tab "1".)
I have this working no problem but here is my snag.
The workbook name changes every week to correspond with the date (i.e 1_14DEC2011.xls then 1_21DEC2011.xls).
Ideally id like to be able to create a variable for the latter half of the filename so that i can apply this variable to each filepath but i cant quite get it to work.
A small sample of my code is below (and yes i know it is very blunt but so is my knowledge at this stage!)
Code: Sub collate() Application.ScreenUpdating = False Application.Calculation = xlCalculationManual
I'm attempting to create a macro that will look at the total in column (K) and send an e-mail to two different addresses, depending on the amount. If the amount is over $10,000 then one address (over@macro.com) if under, then the other (under@macro.com)
My main problem is that I never know what cell the total is going to be in.
I currently have all quotes going back to the person that sent in the request, no matter what the amount. Their e-mail is in the sheet.
So what I think I need to do, is find the last cell in column K with data and assign it a variable. If that variable is over $10,000 then I can send the e-mail to a hard coded address. If it's over, I just use my original code.
I would like to assign listbox members to a public variable (quite the opposite of what you normally do). I receive the error message "type mismatch".
Public MemberLB as Variant Public Sub ListBoxTest() n = ListBox_target.ListCount For iCnt = 1 To n MemberLB(iCnt) = ListBox_target.List(iCnt - 1) Next iCnt End Sub
I have a formula which assigns a points score to letters in a range and adds them up. In the example below F=0, P=6, M=12 & D=18. =IF( COUNTIF(AT5:BE5,"="""),"",SUM(COUNTIF(AT5:BE5,"=F")*0,COUNTIF(AT5:BE5,"=P")*6,COUNTIF(AT5:BE5,"=M")*12,COUNTIF(AT5:BE5,"=D")*18)). Thus if F, P, M & D were in cells A1:D1 the result would be 0+6+12+18=36.
My aim is to be able to customise the values of F, P, M & D, using a table and a cell value. See the table below, where the first number in each row represents a cell value which the user enters into BH1, the second, third, fourth and fifth numbers represents the values assigned to the letters F, P, M & D.
Some examples of expected output: user enters 10 into BH1 and then enters F, P, M & D in cells A1:D1 the result would be 0+1+2+3=6. user enters 90 into BH1 and then enters F, P, M & D in cells A1:D1 the result would be 0+9+18+27=54.
I am working on a customer report template that generates our customers reports and will send them out automatically.
This issue I have now is that the system that generates the raw data for these reports only lists the Customers name in a column with an entry for each line of data, the thing is though that the system has lots of variations of the customers name, even more so if that customers has different departments.
What I need to do is from this list of customer names, I need to automatically figure out what the "common" name is or main name so to speak, and then make a variable using the correct full name, which will be used later on in the code to import correct logos, and direct the reports to the correct people.
Here is a quick example of what data we get raw from the system:
Customer Name: John Build Johns Buildings Johns Ltd Building Johns Plumbing Department Glass Doors Ltd A Department of Johns Buildings Johns Building Corporation Hole In One Golf Range
This is just an example, we have thousands of clients, so the length, number of words etc can change alot. Ideally I from a list similar to that I would get a full proper result of "Johns Buildings Ltd" for example, this would then be in a variable to be used in code from then on to reference doing certain things with the reports of Johns Buildings Ltd.
You'll notice there is one name "Hole In One Golf Range" that seems to have no relation at all, this is correct, ideally I would also like to build in some error checking into the code, so that rows like that that have nothing to do with the others would get deleted.
So how would you amazing VBA gurus go about working with data like this? I'd prefer a more general answer with explainations that just straight code, as I'm sure I will have to adapt the hell out of it for it to be useful in context.
I am writing a code wherein I want to assign specific excel range to a declared variable and then paste this excel in outlook message ody but I am finding difficulty in assigning that range to variable " brng"
I think code is right and issue is there in excel setting.
Code: Sub mailer() ' ' ' Dim Ash As Worksheet Dim brng As Range Dim OutApp As Object Dim OutMail As Object 'Windows("Copy of FF RPL REPORT_JULY").Activate
What I'm trying to so is track weekly labor costs- my crew makes a rate for 6 days then an additional amount for a 7th day. I have attached an image of what I'm trying to do. Basically I want to add up the crew members "a" rate plus the "b" rate (if applicable) over multiple weeks in the total column.
is there any way wer i can assign the name of a sheet to cell so that watever i typ in the cell automatically becomes the name of that sheet? i have more than 2000 sheets
I think I'm using the correct terminology with the term "variable", but to explain what I'm trying to do, I want to get RAND() to hold the first returned variable so I can compare it to other places RAND() has been used & if the returned value is the same as the other place, then run RAND() again.
I'm trying to say in the formula above that if rand = what was already in A4 then run random again -- but this doesn't keep if from returning the same value as A4 on the second pass.
What would work is something like (where X is the assigned variable):
I could really use some excel function. Within my office, we work with several hundred files. Each employee is assigned files based on the last two digits of the file number. What I need is a way to identify what file is assigned to which employee based on the term digits of the file.
So for example, I have the following list of files:
I'm able to do a formula to get the term digits (meaning the last two numbers), but i'd like to have another column that can put names based on the term digit column. For example, Tom might work 00-04, Sally works 05-09, Greg works 10-15, Lucy works 16-21.. etc
I came across the below IF formula that is exactly what i need, except it only works for two associates and not the multiple that i need.. but it looks to be a good starting point nonetheless.
------------------------------ =IF(C2<50,"Sheryl","Lisa"). You should enclose Sheryl and Lisa with quotation marks as these are string values.
You can also use (if A2 is where the Loan # is):
=IF(Right(A2,2)*1<50,"Sheryl","Lisa")
The formula will acquire the last 2 digits of the loan and check it if it's for Sheryl's or Lisa's. -----------------------------
I'm trying to enter the = sum formula using vba with one of the ranges in the formula being a variable. Can not seem to get the following to enter the formula correctly.
I have a data set which is structured such that there are variable numbers of products (column A) from 1 - 48 and these repeat multiple times for each "Name" held in column B. I have attached an example of this which uses a data set with 7 entries reapeating 7 times.
I need excel to insert 2 formula for me multiple times which needs to varry according as follows
1. Calculate the average value of data in Column C - G for n cells starting at a specific cell (C2), I have inserted an example of this and highlighted it in yellow. This then needs to repeat down column C several times, the number of times this will repeat depends upon the number of different names held in column B. But I have this calculated already and stored in a cell im my main document.
2. Calculate the variance of each value in the x cells above from the average calculated in point 1 above. I have highlighted this also in yellow.
I would like to do the following in a copied down row where n5 is a cell that contains a number that is added to a row number in order for the range to maintain n5 rows when copied down.
I'm using Excel 2000/2002. I have a workbook with 12 sheets named Jan, Feb, etc. I want to add a new sheet (Report) with formulas in various cells to get data from a cell in a particular sheet.
For instance, in a cell of the new sheet is: =Jan!D64. I want the user to be able to select a month from a drop down list and for the formula to change sheets depending on the month selected. The formula should be: =(sheet name!)D64. I tried playing with INDIRECT, but maybe couldn't get the syntax right. I can't use macros, the Excel is on a server and they are not permitted. The end user is less knowledgeable in Excel than me.
The lookup is for 00.2014, but this is to fixed. Want to use the same code next year to. So I already defined the variable 'jaar' which the user can choose with a validation. (and next year they set it to 2015).
I thought this code would do it but no luck:
[Code] ....
So what would be the correct way? Been shifting with the " " but its only make more and more mess.
In a macro I use that formula to add the cells of column E (or 5) from Row 3 down to the row of the active cell which is in column H (or 8), (the active cell would be H9 in this instance); and the result goes to the active cell as the formula =SUM ($E$3:E9).
But I want the result to go directly to a numeric variable, not to a cell. Something equivalent to this:
I need to create a new variable according to the formula:
Suma( Foreign_Owenrship_Plant * Number of Full Time Employees)/ Suma(All Full Time employees in the sector)!
However previosly I need to filter the firms within a sector within a country according to a three digit ISIC code. Lets say in Albania, in year 2002 in the Transport sector there are 5 groups of 3 digit ISIC codes. Once I have filtered them then I can proceed with calculating the new variable. How can I do this using programming?
