Create New Variable According To The Formula
Jun 18, 2012
I need to create a new variable according to the formula:
Suma( Foreign_Owenrship_Plant * Number of Full Time Employees)/ Suma(All Full Time employees in the sector)!
However previosly I need to filter the firms within a sector within a country according to a three digit ISIC code. Lets say in Albania, in year 2002 in the Transport sector there are 5 groups of 3 digit ISIC codes. Once I have filtered them then I can proceed with calculating the new variable. How can I do this using programming?
View 1 Replies
ADVERTISEMENT
Aug 4, 2012
Using VBA how can I make a variable name using the cell value.
Like if Range A1 value = "X1" and Range B1 = 1001
I would like to end up with Variabel (X1 = 1001)
View 1 Replies
View Related
Apr 14, 2009
I want to basically set a varible that can be called back into a multiple of documents I will try and explain this as best as I can but it is a fortnightly pay date... i.e. 22/04/2009 Wednesday... as the payroll is fortnightly I want to be able to use the current date or todays date in a future proof macro.
i.e. if todays date is the 14/04/09 then the next pay date has to be the 22/04/09, if this was run in two weeks it would be 06/05/2009.
I was thinking a long the lines of lock in one start date... 14/01/09, then adding increments of 14 days until todays date - variable + 14 * r = "-"
View 9 Replies
View Related
Jul 11, 2014
I am working on a set of Books to be published together. I am attempting to count the number of times a Book contains a glossary word that only appears once in the whole series. Conceptually I need to check if a word in A1 == any word in Sheet2 A:A, if so then does the value in Column B == 1, if so increase count by 1; if not proceed to A2 == Sheet2 A:A, and so on.
If this were a basic program I would do as follows:
C==2 **place count
s==size(A:A) ** check for length of column A (which I know is 179)
if C<=s
match (A'C', Sheet2 A:A)
if B'C' = 1
COUNT == COUNT + 1 ** COUNT is the number of times a book contains a word that only appears in that book.
Else
[Code]...
Here is a sample set up
Screen.jpg
View 5 Replies
View Related
Oct 24, 2011
I have the following code.
Code:
ActiveSheet.Range("$A$1:$AF$" & lngRows).AutoFilter Field:=x, Criteria1:=Array("ELDU238", "ELDU239", "ELDU240", "ELDU241", "ELDU242", "ELDU243", "ELDU244", "ELDU245", "ELDU246", "ELDU247"), Operator:=xlFilterValues
The values ELDU238 - ELDU247 are values in a column beginning at A2. I want to create
"ELDU238", "ELDU239", "ELDU240", "ELDU241", "ELDU242", "ELDU243", "ELDU244", "ELDU245", "ELDU246", "ELDU247"
in a string variable strArray which will enumerate whatever values are in column A beginning at A2 and create the above. I can then have
Code:
ActiveSheet.Range("$A$1:$AF$" & lngRows).AutoFilter Field:=x, Criteria1:=Array(strArray), Operator:=xlFilterValues
Hence if the number of entries changes e.g. say I have
"ELDU238", "ELDU239", "ELDU240", "ELDU241", "ELDU242", "ELDU243", "ELDU244", "ELDU245", "ELDU246", "ELDU247", "ELDU248"
the code will still work.
View 4 Replies
View Related
Nov 25, 2013
I am trying to create a 2 variable data table. I have the variables in a different sheet from the datatable sheet, and I read here XL: Error Message: "Input Cell Reference Is Not Valid" that if I link these variables to the active sheet where the datatable is located it should work, but the table is showing the same result in all the fields.
When I put the put the variables value in the same sheet as the datatable and link to these values from the other sheet the table is working fine, so I know that my design is correct but it has to do with referencing or something else that I need to set but I am not sure what it is
View 1 Replies
View Related
Feb 3, 2008
I hv following table :-
Summary Report FGH1how urgent How ImptRank2highHigh 3midhigh 4LowHigh 5highmid 6Midmid 7Lowmid 8Highlow 9midlow 10lowlow Spreadsheet FormulasCellFormulaF1=+'Mega_Variable (#1)'!R4G1=+'Mega_Variable (#1)'!R5F2=+'Project (1) '!U63G2=+'Project (1) '!U64F3=+'Project (10)'!U63G3=+'Project (10)'!U64F4=+'Project (12)'!U63G4=+'Project (12)'!U64F5=+'Project (5)'!U63G5=+'Project (5)'!U64F6=+'Project (7)'!U63G6=+'Project (7)'!U64F7=+'Project (9)'!U63G7=+'Project (9)'!U64F8=+'Project (4)'!U63G8=+'Project (4)'!U64F9=+'Project (2)'!U63G9='Project (2)'!U64F10=+'Project (3)'!U63G10='Project (3)'!U64 Excel tables to the web >> Excel Jeanie HTML 4
I need code , when run it will fill in the ranking number :-
Summary Report FGH1how urgent How ImptRank2highHigh13midhigh24LowHigh35highmid46Midmid57Lowmid68Highlow79midlow810lowlow9Spreadsheet FormulasCellFormulaF1=+'Mega_Variable (#1)'!R4G1=+'Mega_Variable (#1)'!R5F2=+'Project (1) '!U63G2=+'Project (1) '!U64F3=+'Project (10)'!U63G3=+'Project (10)'!U64F4=+'Project (12)'!U63G4=+'Project (12)'!U64F5=+'Project (5)'!U63G5=+'Project (5)'!U64F6=+'Project (7)'!U63G6=+'Project (7)'!U64F7=+'Project (9)'!U63G7=+'Project (9)'!U64F8=+'Project (4)'!U63G8=+'Project (4)'!U64F9=+'Project (2)'!U63G9='Project (2)'!U64F10=+'Project (3)'!U63G10='Project (3)'!U64 Excel tables to the web >> Excel Jeanie HTML 4
View 9 Replies
View Related
Oct 17, 2006
I would like to create new empty folders from the list in column B.
The number of folders will vary depending on how many entry in column B.
I need the folders to be created in an existing folder in the "current directory" called "Shop_Drawings".
The following code may be able to be modified.
Sub CreateFolders()
Dim MyFile As String
Dim sDir As String
Dim rng As Range
Set rng = Sheets("Matdata").Range("B2")
While rng.Value <> ""
MyFile = rng.Text
sDir = "CurDirShop_Drawings" & MyFile
''above is where I am having trouble...don't know the correct syntax''
MkDir sDir
Set rng = rng.Offset(1)
Wend
End Sub
I have attached a sample workbook.
I have been getting by with code which requires changing the destination in the module whenever making folders in different diectories or drives.
View 6 Replies
View Related
Dec 8, 2012
VB:
ActiveSheet.Hyperlinks.Add Anchor:=Selection, Address:="", SubAddress:="Work_Log!" & Sheets("Work_Log").Cells(b, 1), TextToDisplay:="View"
I want this to link to Work_Log!.Cells(b,1), however instead of grabbing the specific cell, it is pulling the contents of the cell and creating a URL of that. For instance if b = 1 and cell A1 contains the value "yellow" then this code is giving me the hyperlink to WorkLog!Yellow when I want it to read WorkLog!A1
View 2 Replies
View Related
Oct 26, 2007
Let's say I have cell A1 on Sheet 1 of Book 1. I need this cell to be a range variable for a macro in Book Two, but cell A1 varies from time to time (A1 this time, A7 next time).
In Book Two, I write "A1" as the contents of cell C3, for example. How do I turn that string into a range variable for use, not the containing cell? Since the cell needs to manually changed each time I run the macro, having it as a text field somewhere on my Book 2 Sheet seems the only simple way to identify it but IS there another way? Selecting it as the active cell and using another subroutine defeats the use of the macro.
View 4 Replies
View Related
Jul 11, 2014
I've only done a small amount of macros with VBA.
I want to create a macro to insert 12 cells left of a column labeled "This Year" As the spreadsheet grows (by 12 columns @ year) the "This Year" column moves to the right. Thus I need to reference the range off of that column and then insert 12 columns directly to the left of it each year. Can I somehow reference the label "This Year"?
I then need to enter the month labels in the new columns row 8.
My problem is trying to reference off the "This Year" column.
View 8 Replies
View Related
Dec 23, 2013
I have an excel file with a large amount of employee data in it and want to create a search facility that will run on variable search functions and display the information on the screen
I want to be able to enter variable search functions as follows:
Employee Number; shows all information on employee
Division: shows all employees in division (possible from a list of all divisions)
Appraisal Eligibility : Applicable shows all the applicable employees
Job Role: shows all the employees with the same job role (possibly from a drop-list of all roles)
I know its easier in Access, but all records in Excel as a legacy and don't have time to create an access database currently.
View 1 Replies
View Related
Apr 5, 2007
I'm trying to enter the = sum formula using vba with one of the ranges in the formula being a variable. Can not seem to get the following to enter the formula correctly.
Last_cell_4 = Range("A4").End(xlDown).Offset(0, 3).Address
Last_cell_5 = Range("A4").End(xlDown).Offset(1, 15).Address
Range(Last_cell_4).Offset(1, 0).Formula = "=Sum(D4..Last_cell_5)"
View 4 Replies
View Related
Nov 23, 2012
I have a data set which is structured such that there are variable numbers of products (column A) from 1 - 48 and these repeat multiple times for each "Name" held in column B. I have attached an example of this which uses a data set with 7 entries reapeating 7 times.
I need excel to insert 2 formula for me multiple times which needs to varry according as follows
1. Calculate the average value of data in Column C - G for n cells starting at a specific cell (C2), I have inserted an example of this and highlighted it in yellow. This then needs to repeat down column C several times, the number of times this will repeat depends upon the number of different names held in column B. But I have this calculated already and stored in a cell im my main document.
2. Calculate the variance of each value in the x cells above from the average calculated in point 1 above. I have highlighted this also in yellow.
View 1 Replies
View Related
Jun 18, 2014
I would like to do the following in a copied down row where n5 is a cell that contains a number that is added to a row number in order for the range to maintain n5 rows when copied down.
=average(b1:b1+n5)
View 11 Replies
View Related
Nov 3, 2009
I'm using Excel 2000/2002. I have a workbook with 12 sheets named Jan, Feb, etc.
I want to add a new sheet (Report) with formulas in various cells to get data from a cell in a particular sheet.
For instance, in a cell of the new sheet is: =Jan!D64. I want the user to be able to select a month from a drop down list and for the formula to change sheets depending on the month selected. The formula should be: =(sheet name!)D64. I tried playing with INDIRECT, but maybe couldn't get the syntax right. I can't use macros, the Excel is on a server and they are not permitted. The end user is less knowledgeable in Excel than me.
View 2 Replies
View Related
Apr 7, 2014
Adjust this piece of code:
[Code]....
The lookup is for 00.2014, but this is to fixed. Want to use the same code next year to. So I already defined the variable 'jaar' which the user can choose with a validation. (and next year they set it to 2015).
I thought this code would do it but no luck:
[Code] ....
So what would be the correct way? Been shifting with the " " but its only make more and more mess.
View 2 Replies
View Related
Mar 31, 2007
ActiveCell = "=(SUM(R3C5:R[0]C[-3]))"
In a macro I use that formula to add the cells of column E (or 5) from Row 3 down to the row of the active cell which is in column H (or 8), (the active cell would be H9 in this instance); and the result goes to the active cell as the formula =SUM ($E$3:E9).
But I want the result to go directly to a numeric variable, not to a cell. Something equivalent to this:
a=(SUM(R3C5:R[0]C[-3])), which is not correct.
What would the correct syntax be?
View 14 Replies
View Related
Jul 14, 2008
Column A will be completely empty.
When an * is inserted into a single cell in column A, that Row number will become the variable in this equation:
=Sheet1!$G$'variable'
i.e. if i put a * in A14, then the formula should read (=Sheet1!$G$14).
View 10 Replies
View Related
Nov 8, 2011
It's probably O so simple but: Using a variable in R1C1, here's the attempt:
-----------------------------
Dim RS_Period As Double
-----------------------------
RS_Period = Sheets("Sheet1").Range("B17") - 1
-----------------------------
Range("E2:E" & LastRow).FormulaR1C1 = "=(RC[-2]-OFFSET(RC[-2],9,0))/OFFSET(RC[-2],9,0)"
-----------------------------
I lieu of the "9" I need to use the "RS_Period" which is an offset value.
View 4 Replies
View Related
Jan 8, 2012
I try to adjust chart range using variable value instead of constant value.
My current code :
ActiveSheet.ChartObjects("Chart 4").Activate
ActiveChart.SeriesCollection(1).Values = "='Check_2G'!$Z$2:$Z$32"
I need to make range ( "='Check_2G'!$Z$2:$Z$32" ) adjestable with varible like m instead of 32 in previous code.
View 2 Replies
View Related
Jan 17, 2012
I am trying place the "sum" formula into multiple cells, changing with "i" (itteration process).
Something like:
.Range(17,counter).formula = "=Sum(B2:B20)"
when the couter itterates, the same line of code should give:
.Range(17,counter).formula = "=Sum(F2:F20)"
My actual code looks like: ... which doesnt work.
.Offset(17, " & ColumnHeadCout & " + 1).FormulaR18C" & ColumnHeadCout + 1 & " = ""=SUM(R[20]C[" & ColumnHeadCout + 1 & "]:R[" & NumberStreamElem + 20 & "]C[" & ColumnHeadCout + 1 & "])"
View 9 Replies
View Related
Nov 6, 2013
Trying to Figure out the syntax for setting range properties with a variable. Is this possible?
Code:
Sub Testing()
SomeVariable=7
.Range("B7").Formula="=Average(A & SomeVariable:C & SomeVariable)"
End Sub
View 2 Replies
View Related
Jul 25, 2007
I allocate result of formula FORMULA R1C1 into the active cells,,,AND NOW I wan to allocate it into a variable x or y (I dont want that the result appears in the spreadsheet, just into a variable to work the code!)
View 9 Replies
View Related
Mar 7, 2008
I have a macro which defines a workbook selected by the user as the name ServicingInfoFile.
The macro then proceeds to write vlookup formulas in another workbook to pull data from the ServicingInfoFile workbook.
Only problem is that the code errors out at the vlookup formulas every time.
Can I not use a Variable in a formula?
Is it just my syntax?
ActiveCell.FormulaR1C1 = _
"=VLOOKUP(RC[-1],'" & ServicingInfoBook & "'!C1:C2,2,FALSE)"
View 9 Replies
View Related
Jun 22, 2009
I am trying to write a formula in code that uses a changing variable, "X".
here is what i have thus far:
.Value = (("G" & X) + 1) - (("G" & X) + ("B" & X))
I am trying to say: ((GX)+1)-((GX+BX))
X is a variable that changes in a loop. it will be the row number. so for example:
(G18+1)-(G18+B18)....I AM APPEARNTLY NOT WRITING THE SYNTAX CORRECTLY.
View 9 Replies
View Related
Sep 16, 2009
if it is possible, to use a string variable in a Formula via VBA.
For example: ActiveCell.Formula = "=SUM(Sheet3!strVariable)"
Of course the code is not working that way. The Variable has the following structer: CellAdress;CellAdress;CellAdress... so it would perfectly fit into the formula-syntax.
Is there any possible way to do that? The reason behind it is, that I have to deal with a flexible range and I want to process this range with a formula. Actually the range is flexible, because of different filters and I only wanna count all numbers in the unhidden rows.
My varibale would then contain all celladresses, for the visible cells.
So in a nutshell: is it possible to somehow use a varible in a formula?
View 9 Replies
View Related
Apr 21, 2006
Just a quick question, is it possible to use a string variable in a Excel formula (in VBA)? Im trying to do the following in VBA
mortgageSchedName = acName & " Schedule"
Range("B6").FormulaR1C1 = "=mortgageSchedName!RC[254])"
the above results in an error because there is no such sheet as "mortgageSchedName", but I want it to access the value of that string variable.
View 6 Replies
View Related
Feb 6, 2007
I’m trying to have a transpose formula with a variable in the VBA code. The Data is in column AG, starting in row 6 but the end is always different. The transpose formula should copy the data into Column Z (also with a variable row). So if the Data is AG6:AG7 it should go for example to Z 50 and AA 50 etc.
Dim lngTransposeBottom As Long
Dim lngFormulaDataBottom As Long
Dim countnonblank As Integer, myRange As Range
Set myRange = Columns("AG:AG")
countnonblank = Application.WorksheetFunction. CountA(myRange)
Range("Z" & lngFormulaDataBottom).Offset(3, 0).Select
Range(Selection, Selection.Offset(0, countnonblank)).Select
lngTransposeBottom = Range("AG65536").End(xlUp).Row
Selection.FormulaArray = "=TRANSPOSE(R6C33,R""" & lngTransposeBottom & """C33)"
Unfortunatly I always get the following error message: “Unable to set the FormulaArray property of the Range class”. how to change the code to get it up and running?
View 3 Replies
View Related
Feb 13, 2007
G:G contains a list of integars, though some cells are blank; lets say 75 of the 100 cells in data range are < 0. I want a macro which copies a range where the number of rows = the number of values in G:G. my Macro:
Sub myMacro()
Dim rowRange As Integer
rowRange = Count("G:G")
End Sub
This, as you guessed, comes back with an error. Sub or Function not defined. Anyone the proper syntax for assigning a formula to a variable?
View 5 Replies
View Related
