Auto Allocation Of Data
Jun 29, 2013
I have a list of 500 'cases' for staff to work on and I want to auto allocate them to people based on their skills. Whilst I can do this easily with each person have their own page in my workbook, I'm having the issue of the same data being replicated onto multiple sheets.
The main data is on one page and each person has their own individual page for their cases for the day. Is there any way to avoid multiples being sent out whilst creating a kind of 'priority ladder' as such?
View 8 Replies
ADVERTISEMENT
Feb 25, 2009
The task involves summarising about 10,000 lines of data into months by Plant by Process. I can achieve it by stepping through a couple of schedules but I'm sure it can be done using one formula (but I can't find it!).
View 8 Replies
View Related
Jun 13, 2008
Let say I have 5 shops: A, B, C, D, and E
They request for stock replenishment from warehouse as follows:
A: 4 pieces
B:2 pieces
C:3 pieces
D:3 piece
E:3 piece
But since the warehouse only have 12 pieces of this product so need to allocate to the shops in rounds that is:
Round 1: one piece is allocated to each shops (Stock left=12-5=7)
Round 2: one piece is allocated to each shops (Stock left=7-5=2)
Round 3: one piece each is allocated to A and C (the priority should be B but since B just requested for 2 pieces only which has been fulfilled) since there are no more stock
how to write the scripts to do this allocation.
View 9 Replies
View Related
Nov 26, 2013
I have trying to assign cards to respondents to view. I have 16 cards total which are grouped in sets of 4. Each set (of 4) is given a color, (red, green, blue, and yellow). Each color has a 4 different shades (S1, S2, S3, S4) so I have the following 16 cards:
1: Red_S1
2: Red_S2
3: Red_S3
4: Red_S4
5: Green_S1
6: Green_S2
7: Green_S3
8: Green_S4
9: Blue_S1
10: Blue_S2
11: Blue_S3
12: Blue_S4
13: Yellow_S1
14: Yellow_S2
15: Yellow_S3
16: Yellow_S4
I will have a total of 10 respondents giving their opinions who will each see 5 of the cards, randomly. Each respondents must see each color at least once (given that 5th card will be a repeated color). Each card must be tested 3 times (given that the 2 additional cards can be any of the cards).
If there a function or cell code that I can write so that I can allocate the card #s (1-16) across my 10 respondents?
View 1 Replies
View Related
Nov 1, 2009
I have a spreadsheet which has a list of staff (column B) and work categories (row 3).
Row 4 is updated each day with a count of the incoming work for each work category.
I want to be able to randomly distribute (as evenly as possible) the no of work items in Row 4 between the doers (B7:B13). Each item of work also has to be checked so I would also like to randomly distribute the checking between the checkers (B16:B18)....
View 9 Replies
View Related
Jul 12, 2007
I am creating a time allocation / holiday tracking calendar. 150 employes (1 per column) and then using rows (10 - 375) as a daily track. I am having trouble with two aspects and would value your assistance.
1. i have locked the top 9 rows and would like row10 to jump automatically to todays date. i.e current info directly below the titles block
2. How do i make the calendar wrap around i.e. if someone puts in for a week holiday starting dec 31st 2007, how do i make the calendar roll round to 2008.
View 4 Replies
View Related
Aug 4, 2014
I've been assigned a project where I'm suppose to report inventory allocation to projects at end of day every Thursday. The past 2 Thursdays, I've just literally been manually plugging in the numbers into the allocated stock column.
The spreadsheet I came up with is attached. The 1st tab is the demand showing the needed quantities per item and respective due/on-site dates. The on-hand inventory (stock) is on the 2nd tab. My current process is:
1. once items have been shipped, I delete those entries/rows from the first tab. This way, only all the outstanding/open orders remain.
2. after completing #1, I then copy and paste on-hand inventory from our database (Navision) onto the 2nd tab.
3. I manually plug in the the qty for each item depending on stock available. This is the part that I would like to streamline.
Inventory Allocation.xlsx
View 2 Replies
View Related
Oct 2, 2013
I need a formula for batch allocation automatically.
See the attached file : Batch_Allocation.xlsx‎
View 5 Replies
View Related
May 23, 2012
I am trying to write a Macro to allocate a certain cost across thousands of orders. The number of orders will obviously change monthly. The cost is relatively small, and when divided evenly by the total orders needs to be rounded up to the nearest cent (Typically $.01 - $.02)
I then need the cost to be insered in a colum running next to a total cost column, but I need it to stop when it reaches the total cost and just start adding zeros to the rest of the orders so as not to overcharge.
Not sure if I need to incorporate solver somehow. I figured I would reference the allocated cost from a cell in the worksheet but not sure how to insert any algebraic logic into a macro.
View 9 Replies
View Related
Nov 26, 2006
I am reposting this as my previous post was deleted.. i dont know the real reason for the same...
The raw data in the attachment contains:
•C1 to AI1 refers to vehicle numbers.
•Column A refers to Shift Time
•Column B refers to Number of vehicles required in that particulars Shift time
The output:
•As you can see in the Sheet “Output Required”, fields marked in the color “light green” are manually allocated vehicles numbers available and required according to shift time
•The logic used behind allocation is the same vehicle should not be used before or after within the span of 3 hrs, the gap between the vehicle usage before and after should be minimum 3 hrs. And the maximum time gap can be any value.
•Vehicle usage can be maximum (ie. You can use the same vehicle by rotating within 24 hrs but keeping in mind that it is not used before 3 hrs).
• all the available vehicles must be used before the same used vehicle is used in the new shift... ie. You should utilize all the vehicles before one is duplicated
View 9 Replies
View Related
Apr 27, 2007
I m creating a single cell formula in 'report'B3 that would allocate 'data'D3 appropriately by month heading if copied across. A few other threads on this topic only acheive this by creating an addtional row, not in a single cell. Since I'm going to use this on a report in Access, I just need the calculation. Is it not possible to acheive this in a single cell?
View 2 Replies
View Related
Jul 24, 2008
I have been asked to go through some information which has over 200 000 lines, what I need to do is as follows:
where order number is unique, revenue source = "Unique"
where order number appears more than once, check division to see if it appears in more than one division, if it does revenue source = "Cross Selling", if it does not then revenue source = "Divisional Package"
I need all of the above in formula line which will be inserted in the revenue source column
I have attached the file with a sample of the information I am using.
View 9 Replies
View Related
Aug 31, 2012
I'm fairly new to excel and trying to create a simple spreadsheet to provide a log of staff allocation. I've created a first a sheet displaying a table with a week of rota. The first column lists where the staff are placed, the first row the date and inbetween the staff member covering that date. There are 5 further sheets, one for each member of staff with a simple table - first column is date, second is allocation.
Back on the first sheet below the timetable is a further grid showing on the first column staff names, and below each date a formula =VLOOKUP( B$3,David!$A:$Z,2,FALSE) pulls information from the 5 sheets displying whether a memeber of staff is on leave or there allocation on that particular day.
The problem i'm having is trying to get the 5 simple staff sheet to pull data from the Rota ie. I need say B3 to look at the date in A3, find the same date on the Rota sheet, look for the relevent staff name below it (if present), and display the allocation from the first column on the same row as the staff member.
I've tried a combination of Vlookup with Match and Index with Match but nothing seem to work.
View 7 Replies
View Related
May 15, 2014
On the attached sheet in column X, I am trying to input the Allocation percentage dependent on a number of variables:
Type (Bar, Blank, Coil, Sheet, Special)
Sub Fam Code (2A02, BC02-05, BC99, BZ99)
Sup Category (Arcelor, Independent, Tata/ Corus)
The allocation percentage is based on the below; anything outside of this should result in "Other".
Sheet (BC02/03/04) A=40%, T=40% & I=20%
Coil (BC02 & BC03) A=40%, T=40% & I=20%
Coil (BC04) A=30%, T=50% & I=20%
Example 1:
Type - Sheet & Coil
Sup Category - Independent
Result 20%
Example 2:
Type - Coil
Sup Category - Tata/ Corus
Sub Fam Code - BC04
Result 50%
Example 3:
Type - Coil
Sup Category - Arcelor
Sub Fam Code - BC04
Result 30%
View 1 Replies
View Related
Jan 27, 2014
I am running Excel 2010 32bit under Windows 7. The Excel file worked perfectly under Excel 2007 and Windows XP. The Excel file is somewhat complex with numerous links and embedded cell formulas. Occasionally, I get the following error message:
5.jpg
Before I install the 64 bit version, I attempted to chack a few other things. I opened the task manager and while viewing the process tab, I opened my Excel file. Once the file loaded, this is the allocation displayed in task manager:
1.jpg
This seemed reasonable considering the size of the Excel file (33Mb). Without changing anything, I clicked save to make sure it was working properly. While viewing the process, I watched the allocation climb, substantially. when it completed, this is what the process displayed:
2.jpg
Continuing to click the save button, without changing anything, continued to increase the memory allocation until the error message was displayed:
3.jpg
4.jpg
Closing Excel and re-openeing the file resets the memory allocation back to normal, which is a popular solution to this issue in the forums.
I did check the same issue using Excel 2007 and the memory allocation releases after each save.
I can see how installing the 64 bit version of Excel can correct this issue, and with 12Gb of Ram, I will probably use this method until I can get this fixed.
View 3 Replies
View Related
Jan 7, 2008
Within a data validation selection, are you able to do both Auto Complete and Auto Delete? I have this posted at another forum [url]but have not been able to find a solution (a copy of the file, test. zip is there as well). I am not sure it is possible, or, at least I have been unable to get it working. I can do each, but not both.
I have also been utilizing:
[url]
[url]
View 5 Replies
View Related
Oct 7, 2013
I have an excel WS1 set up as DB; I want to keep this sheet for data revision. WS2,3, 4, & 5 will be data that is filtered and sorted, using WS1 as source so I want to auto copy the WS1 data. Can I just auto copy WS1 (how do I do that?) then filter and sort in each WS?
View 3 Replies
View Related
Oct 18, 2013
I have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update()
Dim bottomrow As Long
Dim My_Range As Range
bottomrow = Cells(Rows.Count, "C").End(xlUp).Row
Set My_Range = Range("A1:Y" & bottomrow)
[Code] .....
View 6 Replies
View Related
Aug 31, 2013
I have a two sheet, in Sheet1 i have a data, and in sheet 2 i have a count of location wise data in it, which is from sheet1.. And beside it u will see a button "View Detail". When you click on that button it will pop up a userform which have listbox and 2 button.. Now in listbox i get a filtered value of column C of sheet1 (For eg. Mumbai, Pune, Chennai).. When i click on the value (Mumbai) in Listbox and then click on View Location Details. It should give me a details of mumbai based candidate, like name, pod no, location in the range of (H5:J100) of sheet2..
I wrote the code for it but its not giving me the correct data..
View 1 Replies
View Related
Sep 26, 2009
I need to have cell data on sheet 1 to populate cells / rows on sheet 2 when the data is sorted on Sheet 1.
So let me explain: I have workloads on each row in Sheet 1. Column A has a list of people that I assign to each workload. After assigning a name in Column A to each row, I sort Column A by the user to print out only their workloads.
Currently, we have a paper worksheet where they manually write in their workload. I have replicated this worksheet on Sheet 2 and was wondering if I could use the data in Sheet 1 after being sorted by user, to populate the worksheet on Sheet 2 ?
View 10 Replies
View Related
Jun 26, 2013
I have 5 columns: A, B, C, D & E of which I have drop downs for: Yes, No, Maybe, Not Sure for A, B, C, & D. I need column E to offer a hyperlinked mailto:ask@bob.com when A, B, C have Yes, Maybe or Not Sure selected. If Yes, Maybe or Not Sure is selected for D, I need to have a hyperlink mailto:ask2@bob2.com. When no is selected for any of them, I need to have it say None.
View 9 Replies
View Related
Apr 4, 2009
There’s one “master table”. Two columns in master table are titled “Name-1” and “Name-2”, and all columns in front of it carry “Properties” corresponding to these names.
In a “second” table, when we choose/type the Name-1 and Name-2, corresponding properties should automatically be picked up from the master table. Is that possible?
View 12 Replies
View Related
Dec 5, 2012
I have done conditional formatting for my inventory status of many models. So anytime inventory goes below a certain level, the product gets high lighted.
I want excel to automatically export the monthly highlighted report to another file. How can I do it?
View 2 Replies
View Related
May 6, 2014
I have a range c10:c300, i want to select the range where i have data.
E.g. I have data in c10:c50, then select the range c10:c50
View 3 Replies
View Related
Apr 1, 2009
As you can see from the attached spreadsheet. I have a page called Pattern Etch where we enter the data for all the processing done in a single machine.
Each device type is slightly different, and therefore has a different calculation fasctor for its etch time. This all weorks fine. What I had previously was another spreadsheet with the pages b and g in it. This is where the factors are calculated and updated from.
I'd like to make this update automatic, and suspect the easiest way is to combine the two spreadsheets, as in the attached version. Can the sorting of the data from the patternetch page to the apprpriate pages, b and g be done automatically? If so can it be done for many pages as I have cut down the spreadsheet, I actually have 50 variants, each will need its own page (as for b and g).
View 2 Replies
View Related
Feb 4, 2010
I just wanted to ask whether the same code will work for many more sheets or will modification be needed? I have a very basic understanding of vba loops, so plz tell me did you check the entire row for being blank or specific cells? Im attaching a file which more closely resembles the data i work with, just tell me whether the previous macro called "ravi" will work fine or will it require modification.
View 12 Replies
View Related
Jun 29, 2006
I've a workbook with several worksheets, namely "Jan06", "Feb06"......and
"Summary". This Summary worksheet consolidates all data from columns A, B & E
of all other worksheets in the same workbook(they are identical). Every time
when I filled in all records for that month, I've to copy the data from
columns A, B & E to the "Summary" worksheet for further analysis purpose. Is
there a macro which can copy those required data from any of the worksheets
automatically to the first blank row in the "Summary" worksheet?
View 14 Replies
View Related
Jun 10, 2014
I have fixed data:
Michael = Resident
Joan = Intern
Patricia = Consultant
James = Nurse
what I want is every time the name (eg Michael) appears in column A, the title (resident) auto fills in column B. Do I need to put a data source for this?
View 14 Replies
View Related
Jul 29, 2014
i am currently working on a file that counts things during the day and then sums them up. i have a different sheets for each day witch are named 28.07,27.07,26.07 etc'
i want the current sheet to pull data from the last sheet, lets say from cell I10. so if i'm working on the 28.07 - i use the formula " ='27.07'!I10' " and it works just fine. but i want to automate it. lets say make a cell in every sheet with the name of the previous one (i figured out how to automatically generate it) and make the formula pull from there. so lets say if i use the cell B2 for the value of the previous sheet (27.07) - it should look like " =B2!I10 "
View 4 Replies
View Related
Nov 29, 2006
I'm using a very long validation list for a drop down menu. Is there anyway to setup the drop down so that one could start typing and the list would immediately eliminate to less options?
For example, my list consists of 3000 plant names. Instead of scrolling down to choose a plant that begins with a letter P, is there anyway to start typing "P" in the cell and have the list pop up and jump down to entries that begin with "P"?
I know I've entered data with such a function but can't figure out how to set it up?
View 4 Replies
View Related
