How To Auto Populate Data

Jun 26, 2013

I have 5 columns: A, B, C, D & E of which I have drop downs for: Yes, No, Maybe, Not Sure for A, B, C, & D. I need column E to offer a hyperlinked mailto:ask@bob.com when A, B, C have Yes, Maybe or Not Sure selected. If Yes, Maybe or Not Sure is selected for D, I need to have a hyperlink mailto:ask2@bob2.com. When no is selected for any of them, I need to have it say None.

View 9 Replies


ADVERTISEMENT

Auto Populate Cells With Corresponding Data From Different Worksheet?

Nov 26, 2012

I'm trying to figure out a way to populate multiple cells automatically with certain information after entering info into a single cell on a separate worksheet in a separate workbook.

Our "master" sheet has 22 total columns (A-V), and our weekly "status" sheet only has 7 total columns (A, E, P, L, M, N, R).

Column A on both sheets is labeled "Sample Number". On the "status" sheet I want to be able to type, for instance, "2012-228" into A2 and have the corresponding values from Columns E, P, L, M, N, R on the "master" sheet automatically populate into B2-G2 on the status sheet if this is at all possible.

View 5 Replies View Related

Auto Populate A Third Cell - Based On Data From Two Columns

Mar 24, 2013

I have data in three columns

A B C
4.5 9.50 4.657
4.5 11.60 4.789
4.5 12.50 4.654
4.5 13.50 3.930
4.5 15.20 3.826

I need to be able to auto-populate the cell in column G based on values in columns A & B. If I type 4.5 in E2, and 13.50 in F2, G2 should auto-populate with the value from column C

E F G
4.5 13.50

View 2 Replies View Related

How To Get Data Entered In Form To Auto Populate Into Calendar

Jun 26, 2014

I am trying to build a Calendar that pulls all of it's entries from data submitted via user form. To be more clear, I built a basic user form in VBA where I can submit this data: name, brief description, Time/duration, and date. Instead of the data I enter into the form populating in specific cells in my Excel workbook, I would like for the information to be populated into a calendar based on the date.

View 1 Replies View Related

Auto-Populate Date When Data Entered Into Rows

Aug 10, 2014

I am building a budget spreadsheet and would like the date to automatically populate in column H when data is entered into rows J through AN, or alternately update column H when a sum total is populated in column I

I need to repeat this for rows 4 through 63

I was trying to use the following code, but cannot get it tweaked right.

[Code] .....

View 1 Replies View Related

Excel 2003 :: How To Auto-Populate Data From 1 Worksheet To Another

Jul 2, 2014

I have inherited a number of databases in work (running Office 2003). It has quickly become apparant that a vast amount of work is duplicated and so i am trying to cut down the data input and therefore the possible errors.......

I have narrowed most of the work down and now have a major worksheet (is that what you call a complete Excel file) named "master database" and several over minor files....

Currently what i am trying to do is to get the minor files (68 seperate files) to auto populate an area of the master database. I will try to explain it below...

1. Minor database has 2 columns with data i require to auto populate the master database. (1 column (B) is called 'off', the 2nd column (C) is called 'on').

2. A number will be inputed manually into either 'B' only or 'B and C' columns, depending on the criteria of the job..

3. The criteria of the job is dictated by column (Z) where the text 'A' or 'ATL' is inputed

4. The master database i would like to add up the numbers inputed as a total from columns 'off' and 'on' and place them into seperate columns 'E' and 'G' of the master database.

5. IF column (Z) shows 'A' then only column (B) 'off' is to be calculated and put into the master database at column (E)

6. IF column (Z) shows 'ATL' then BOTH columns (B and C) 'on' AND 'off' are to be added together and column (G) populated on the master database.....

To make matters more complex. An expiry date is shown on the master database at columns (D) and (F).
IF column (E) does not exceed 12 by the expiry date, i would like the cell (D) to turn red
IF column (G) does not exceed 10 by the expiry date, I would like the cell (F) to turn red

View 7 Replies View Related

Auto Populate Invoice (including Description) From Data Sheet

Dec 5, 2012

creating an Excel invoice that would auto-populate from another Excel worksheet or file with data. The information that I would want to include are:

Company name
Name (person)
Email address

Start date
End date
Promotion description
Number sold
Price per item
Total charged

View 1 Replies View Related

Auto-Populate Data Depending On Selection From Dropdown List

Jan 21, 2013

How to populate MTD data linked to the other spreadsheet file (monthly data) to the table on the left, depending on the month selected month from the dropdown list.

Attached files for reference :
Dropdown Month.xlsx‎
MONTHLY DATA.xlsx

View 3 Replies View Related

Auto Populate Data After Sorting The Data

Sep 26, 2009

I need to have cell data on sheet 1 to populate cells / rows on sheet 2 when the data is sorted on Sheet 1.

So let me explain: I have workloads on each row in Sheet 1. Column A has a list of people that I assign to each workload. After assigning a name in Column A to each row, I sort Column A by the user to print out only their workloads.

Currently, we have a paper worksheet where they manually write in their workload. I have replicated this worksheet on Sheet 2 and was wondering if I could use the data in Sheet 1 after being sorted by user, to populate the worksheet on Sheet 2 ?

View 10 Replies View Related

Excel 2010 :: How To Auto Populate Data Based On ComboBox Selection

Jan 27, 2012

I have a question on how I could populate data using a combo box selection in Excel 2010.

For example, I have a table with values in Sheet 1, & below that table there is a combo box whereby another table of values can be populated based on the selection of the combo box.

Maybe to make it clearer...

Table 1
Name | Address | Phone number
Andy | Avenue 2 | 999
John | Road 5 | 998

Combo box (selection of names): John

Data derived from combo box - Table 2
Name | Address | Phone number
John | Road 5 | 998

how I could solve this Also, do let me know if this can be done without the use of VBA.

View 4 Replies View Related

Auto Populate Data Values Based On Dependence Of Two Drop-down Lists?

Feb 1, 2013

I am trying to create an easy fill spreadsheet for a game. I am looking to have data values auto fill based off of the entry of 2 prior drop down menus.

I would like to have values for "Move", "Str", "Spd", "Skill", "Armor", and "Value" auto populate after the "Race" and "Role" has been selected. Data for these auto fills I have put on Sheet2 while the main file itself is on Sheet1.

If possible I would like to have Value increase by 5 for every level in "Rank" on the sheet.

View 1 Replies View Related

Create Dropdown List Using Data From Different Worksheet And Auto-populate Remaining?

Sep 11, 2013

I have two worksheet. One worksheet is a form where in the Field Door No. should be a dropdown list. The list will be retrieve from worksheet Source. Now upon selecting a specific Door No. it should also autopopulate the respective Type, Brand, Serial No., and Type.

First thing i need to know is what should i do on Cell B1 worksheet Form for it to be a drop down list retrieving the Column A on worksheet Source.

Second, upon selecting for example ATC0009 on the drop-down, it should auto-populate like these

Door No. ATC0009
Type AT Crane
Brand A
Serial 43679
Type Crane

View 14 Replies View Related

Auto-populate Data To A Master Worksheet From Other Sheets In A Shared Workbook

May 11, 2009

I have never really used VBA and so am completely stuck at this problem. I need to create a macro which auto-populates a master worksheet from the individual user sheets in a shared workbook. Sheet 1 is the master sheet "Team Stats". There will be an undetermined number of individual worksheets to accomodate new staff. Each worksheet will be identical, using columns A-I with row 1 having the headings:

Date, Name, Reference, Value, Price, Age, Purchased?, Destination, Add. Products (the last 3 columns will have a drop-down list which will be used to enter data into the cell). There will be a varying number of rows in each of the individual sheets. If possible I would like the macro to run every time data is entered into one of the individual worksheets. If this is not then it would be fien to update every time the workbook is opened.

View 5 Replies View Related

Macro - Auto Populate The Data, Based On The Previous Cell Values

Aug 3, 2009

the post 5 for the actual issue. This being my first post could not update it correctly. I have put my views int he 5th post which will be more clear.

View 9 Replies View Related

Excel 2007 :: VBA Auto-populate ComboBox With Range Of Data In Spreadsheet

Sep 20, 2012

I'm trying to get some vba to automatically find the range of data in a spreadsheet (So start from a specified point and loop until it's blank) and populate a combobox with this range accordingly. I have read numerous articles and posts but nothing seems to work!!

I am using Excel 2007.

View 5 Replies View Related

Auto-Populate Column Data From Source Sheet After Selecting From Dropdown List

Jan 11, 2013

I'm trying to make a spreadsheet that can be used to easily build a collective list of steps, for a user to read and follow line-by-line.

I want a source sheet of "steps" that I can change over time, and the resulting tabs that reference the source sheet get updated/populated automatically.

I've pieced together some VBA code from other sources, which kind of does what I want it to:

VB:

Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Row > 1 And Target.Column = 1 Then
Dim SourceSheet As Worksheet
Set SourceSheet = ActiveWorkbook.Sheets("Steps")
Dim TargetSheet As Worksheet
Set TargetSheet = Target.Worksheet
Dim c As Integer
Dim Source As Range

[Code]...

But there are some problems:

1) The data auto-populates into a row. It would read better if each step was in the same column, meaning rows would need to be automatically added upon selecting something from the drop-down list. The number of rows that need to be added vary based on the number of steps in the source sheet, for the selection made from the drop-down list.

2) If you make a change to the source sheet, my goal is to have the other sheets referencing the source sheet's lists of steps update automatically, so you only need to update the steps in one spot and everything you've built from them gets updated instantly. Currently, you must select a different choice from the drop-down list, and then change it back, before it populates the "new" steps from the source sheet.

This is my first time using VBA.

What I have so far is attached: testAutoPopulate.xlsm

View 2 Replies View Related

Get (tabs) Of Action Log To Auto-populate And Auto-delete In Master Log

Jul 29, 2014

I need the tabs of a project action log to auto-populate and auto-delete in a master log. (So when something is added or deleted in a tab it is added or deleted on the master) I use excel a little bit for work and personal finance purposes but I have zero experience with macros or VBA.

View 1 Replies View Related

Auto Populate Calendar Days Based On Month / Year And Auto Insert Work Based On Dates / Name

Jul 31, 2013

I am trying to auto generate a calendar based on two drop down menus - Month and Year.

Once the month and year is selected I want to import all work orders onto the calendar based first on the "Labor Name" found in the list of work tab, then assign each work order for that labor name to the respective date on the calendar for the month.

August PM Schedule Demo.xlsx

View 2 Replies View Related

Auto-Populate Excel Sheet From Master Sheet Of Data

Mar 1, 2014

In this attached example, this is a portion of a actual work procedure. The yellow highlighted cells are the same work element within the master procedure but one is for one type of machine while the other is for same model but added options. This is a pattern throughout the entire worksheet. Basically 1 model with several different types of options. I don't want to have unnecessary elements in a work procedure.

So what I am trying to accomplish, I want to create a userform or dashboard which will allow selection of model #, model type #, then based off those selections have excel populate a worksheet with all correct procedures based off model type choice.

In this example there is 6 model variations, all share same basic procedure, but all have their own work procedure based on options, so my above approach will allow me to make changes to the master procedure only instead of changing 6 procedures.

View 6 Replies View Related

Formula To Auto-populate Data In A Table From Another Table?

May 13, 2013

I have a table below that looks like this:

LOC
# of days

DTX
3

RTC
3

PHP
12

IOP
12

The # of days column will be a manual input. Then I have a larger table that will take those values and convert them to look like this: (Obviously the dollar values are pulled from somewhere else)

1
DTX
$ 1,292.00

2
DTX
$ 1,292.00

3
DTX
$ 1,292.00

[code]....

I've been thinking of trying to use a macro but not sure that is the best way. Using a button or something doesn't seem very elegant either.

View 7 Replies View Related

Auto Populate 2nd Combobox Based On 1st Combobox Data

Mar 30, 2014

I need to populate two combo boxes from excel sheet, the data will be like below:

Column A Column B
A 1
A 2
A 3
A 4
A 5
B 100
B 101
B 102

So from the above data, one combo box should hold unique values A & B.

On selecting a value from the 1st combo box A or B, respective values should be populated in 2nd combo box.

So the data should be like below:

If A is selected in the 1st combo box, then 2nd combo box should only show the values 1,2,3,4 & 5.
If B is selected in the 1st combo box, then 2nd combo box should only show the values 100,101 & 102.

Friends I need it in a macro and one important point is, this is dynamic and it is not static and the data can be more.

View 1 Replies View Related

Create New Sheet For Each Row Of Another Sheet Auto Populate Data.

Mar 19, 2008

i have a sheet called 'sample database'. it consists of 56 columns, each with a specific title in row 1. i.e. name, surname, mobile_number, and so on.
from row 2 onwards the data has been populated for roughly 200 rows.

i have another 'Capture Sheet' which has the same titles as 'Sample database' except it's in a different format. its a printable form that is given to new employees when they start. once they have completed it it gets captured into the 'Sample Database' sheet.

my wifes boss now wants 1 new sheet for each row in the 'sample database' sheet based on the format/layout of the 'capture form'.
how can i get the 'capture form' to auto populate the data from the 'sample database' sheet and create a new sheet for each row?
i know this is possible i just dont know how to do it.

View 9 Replies View Related

Auto-populate Cells With Data From Other Cells

Sep 26, 2007

My sheet goes from monday to friday on the coulombs. On the rows i have various data sections for each day. I would like the data on the last day (any day after monday) that there is data for a sheet to input that data into the monday slot when the "master date" is changed on the cheese sheet. The idea here being that the script will take the last entered data for a given sheet, and put it into the monday coulomb on the same sheet when the date is changed. This is kind of hard to explain so if you need clarification let me know. Attached is the sheet i'm working with.

View 14 Replies View Related

Auto Populate Tab

Jul 9, 2009

Is it possible to create a macro which adds a new sheet and names the tab from a cell value somewhere?

View 5 Replies View Related

Sumproduct: Auto Populate

Oct 29, 2009

The first tab I have a summary sheet which I want to auto populate with a sumproduct function, the second tab is where the dates and values are I wish to sum the value if its returned in January. I had a go to try sum the entire range see below but its not working

=SUMPRODUCT(--('Alex Guest - Scotland'!$G$19:$G$1048576>=1/1/2009),--('Alex Guest - Scotland'!$G$19:$G$1048576<=3/1/2009),--('Alex Guest - Scotland'!$H$19:$H$1048576))

The ultimate goal I am trying to achieve is if there is a date in January in the date returned column and the php column does not contain a value I want it to sum in the summary sheet in January. Hopefully if anyone can advise that would be great then I can look at the formula and try workout to sum only if there is a value in the php column in January

View 3 Replies View Related

Auto Populate Address

Dec 20, 2009

on Sheet 2, I have a very long list of names and addresses. What I am trying to do, is to have the correct address auto populate in Cell B253, depending on which name I type into Cell B252.

The formula has to be able to determine which name is typed in cell B252, i.e., John A Doe, and then auto populate his address in cell B253.

View 9 Replies View Related

Auto Populate Cells

Jan 2, 2010

I have a workbook with three sheets:

'Activity' 'Expenses' and 'Income'

On the 'Activity' sheet I:
select the date,
select the description, and
select the category (dependent on the description using indirect)
and enter a value. ($ dollar amount)

How do I make the entered values appear automatically :

- on the correct Sheet for the Description - 'EXPENSES' or 'INCOME'

- in the correct columns (matching) the category

- and in the correct row (matching) the date,

- "add to" - if a value already exists in the cell (more than one transaction on a date)

after they have been hand entered on the 'Activity' sheet?

View 7 Replies View Related

How To Auto Populate A Formula

Aug 3, 2007

My macro runs, and it inserts a cell, but in order to record data on a summary page, I need a formula to auto populate, and I've tried having the macro copy/paste and I've tried ActiveCell.Formula...and nothing seems to be working. The formula needs to go into Cell B3.

View 9 Replies View Related

Auto-populate Corresponding Cells With Each

Dec 10, 2009

I have a database in the form of a spreadsheet with the following column headings:
A=DATE (3 letter abbreviation for the month...jan, feb, mar, etc)
B=Client
C=City
D=State
E=Department
F=Contract number

Is there a formula that I can enter in another worksheet (which is being used as a report), that will "grab" the monthly data for all entries for a given month (i.e. "mar"), and auto-populate corresponding cells with each?

View 9 Replies View Related

VBA Auto Populate Cell Through Lookup

Mar 25, 2014

I would like to enter a name in E11, and then have G11 populate the name of the company that person belongs to, from a different sheet.

If the person is new, the company name entered into G11 should create a new column on the Companies sheet.

I've attached a dummy sheet which should make it more clear.

DummyCompanyPopulate.xlsx

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved