Auto Populate Data After Sorting The Data
Sep 26, 2009
I need to have cell data on sheet 1 to populate cells / rows on sheet 2 when the data is sorted on Sheet 1.
So let me explain: I have workloads on each row in Sheet 1. Column A has a list of people that I assign to each workload. After assigning a name in Column A to each row, I sort Column A by the user to print out only their workloads.
Currently, we have a paper worksheet where they manually write in their workload. I have replicated this worksheet on Sheet 2 and was wondering if I could use the data in Sheet 1 after being sorted by user, to populate the worksheet on Sheet 2 ?
View 10 Replies
ADVERTISEMENT
Jun 26, 2013
I have 5 columns: A, B, C, D & E of which I have drop downs for: Yes, No, Maybe, Not Sure for A, B, C, & D. I need column E to offer a hyperlinked mailto:ask@bob.com when A, B, C have Yes, Maybe or Not Sure selected. If Yes, Maybe or Not Sure is selected for D, I need to have a hyperlink mailto:ask2@bob2.com. When no is selected for any of them, I need to have it say None.
View 9 Replies
View Related
Nov 26, 2012
I'm trying to figure out a way to populate multiple cells automatically with certain information after entering info into a single cell on a separate worksheet in a separate workbook.
Our "master" sheet has 22 total columns (A-V), and our weekly "status" sheet only has 7 total columns (A, E, P, L, M, N, R).
Column A on both sheets is labeled "Sample Number". On the "status" sheet I want to be able to type, for instance, "2012-228" into A2 and have the corresponding values from Columns E, P, L, M, N, R on the "master" sheet automatically populate into B2-G2 on the status sheet if this is at all possible.
View 5 Replies
View Related
Jan 15, 2014
in excel where you can select a column and sort it from high to low, how can you get this to be done automaticly as the data changes?
View 2 Replies
View Related
Mar 24, 2013
I have data in three columns
A B C
4.5 9.50 4.657
4.5 11.60 4.789
4.5 12.50 4.654
4.5 13.50 3.930
4.5 15.20 3.826
I need to be able to auto-populate the cell in column G based on values in columns A & B. If I type 4.5 in E2, and 13.50 in F2, G2 should auto-populate with the value from column C
E F G
4.5 13.50
View 2 Replies
View Related
Jun 26, 2014
I am trying to build a Calendar that pulls all of it's entries from data submitted via user form. To be more clear, I built a basic user form in VBA where I can submit this data: name, brief description, Time/duration, and date. Instead of the data I enter into the form populating in specific cells in my Excel workbook, I would like for the information to be populated into a calendar based on the date.
View 1 Replies
View Related
Aug 10, 2014
I am building a budget spreadsheet and would like the date to automatically populate in column H when data is entered into rows J through AN, or alternately update column H when a sum total is populated in column I
I need to repeat this for rows 4 through 63
I was trying to use the following code, but cannot get it tweaked right.
[Code] .....
View 1 Replies
View Related
Jul 2, 2014
I have inherited a number of databases in work (running Office 2003). It has quickly become apparant that a vast amount of work is duplicated and so i am trying to cut down the data input and therefore the possible errors.......
I have narrowed most of the work down and now have a major worksheet (is that what you call a complete Excel file) named "master database" and several over minor files....
Currently what i am trying to do is to get the minor files (68 seperate files) to auto populate an area of the master database. I will try to explain it below...
1. Minor database has 2 columns with data i require to auto populate the master database. (1 column (B) is called 'off', the 2nd column (C) is called 'on').
2. A number will be inputed manually into either 'B' only or 'B and C' columns, depending on the criteria of the job..
3. The criteria of the job is dictated by column (Z) where the text 'A' or 'ATL' is inputed
4. The master database i would like to add up the numbers inputed as a total from columns 'off' and 'on' and place them into seperate columns 'E' and 'G' of the master database.
5. IF column (Z) shows 'A' then only column (B) 'off' is to be calculated and put into the master database at column (E)
6. IF column (Z) shows 'ATL' then BOTH columns (B and C) 'on' AND 'off' are to be added together and column (G) populated on the master database.....
To make matters more complex. An expiry date is shown on the master database at columns (D) and (F).
IF column (E) does not exceed 12 by the expiry date, i would like the cell (D) to turn red
IF column (G) does not exceed 10 by the expiry date, I would like the cell (F) to turn red
View 7 Replies
View Related
Dec 5, 2012
creating an Excel invoice that would auto-populate from another Excel worksheet or file with data. The information that I would want to include are:
Company name
Name (person)
Email address
Start date
End date
Promotion description
Number sold
Price per item
Total charged
View 1 Replies
View Related
Jan 21, 2013
How to populate MTD data linked to the other spreadsheet file (monthly data) to the table on the left, depending on the month selected month from the dropdown list.
Attached files for reference :
Dropdown Month.xlsx
MONTHLY DATA.xlsx
View 3 Replies
View Related
Mar 25, 2014
I have a problem on auto-sorting my data after clicking the "x" or "Close" button on DataForm. Im creating a command button that trigger a macro to open an autofill DataForm. I want a code that everytime i ADD or EDIT using the DataForm, it will automatically sort the Column A after clicking the "x" or "Close" button. Below is the code of my macro:
Code:
Sub OpenForm()
Sheets("DATA").Select
ActiveSheet.ShowDataForm
End Sub
View 1 Replies
View Related
Jan 27, 2012
I have a question on how I could populate data using a combo box selection in Excel 2010.
For example, I have a table with values in Sheet 1, & below that table there is a combo box whereby another table of values can be populated based on the selection of the combo box.
Maybe to make it clearer...
Table 1
Name | Address | Phone number
Andy | Avenue 2 | 999
John | Road 5 | 998
Combo box (selection of names): John
Data derived from combo box - Table 2
Name | Address | Phone number
John | Road 5 | 998
how I could solve this Also, do let me know if this can be done without the use of VBA.
View 4 Replies
View Related
Feb 1, 2013
I am trying to create an easy fill spreadsheet for a game. I am looking to have data values auto fill based off of the entry of 2 prior drop down menus.
I would like to have values for "Move", "Str", "Spd", "Skill", "Armor", and "Value" auto populate after the "Race" and "Role" has been selected. Data for these auto fills I have put on Sheet2 while the main file itself is on Sheet1.
If possible I would like to have Value increase by 5 for every level in "Rank" on the sheet.
View 1 Replies
View Related
Sep 11, 2013
I have two worksheet. One worksheet is a form where in the Field Door No. should be a dropdown list. The list will be retrieve from worksheet Source. Now upon selecting a specific Door No. it should also autopopulate the respective Type, Brand, Serial No., and Type.
First thing i need to know is what should i do on Cell B1 worksheet Form for it to be a drop down list retrieving the Column A on worksheet Source.
Second, upon selecting for example ATC0009 on the drop-down, it should auto-populate like these
Door No. ATC0009
Type AT Crane
Brand A
Serial 43679
Type Crane
View 14 Replies
View Related
May 11, 2009
I have never really used VBA and so am completely stuck at this problem. I need to create a macro which auto-populates a master worksheet from the individual user sheets in a shared workbook. Sheet 1 is the master sheet "Team Stats". There will be an undetermined number of individual worksheets to accomodate new staff. Each worksheet will be identical, using columns A-I with row 1 having the headings:
Date, Name, Reference, Value, Price, Age, Purchased?, Destination, Add. Products (the last 3 columns will have a drop-down list which will be used to enter data into the cell). There will be a varying number of rows in each of the individual sheets. If possible I would like the macro to run every time data is entered into one of the individual worksheets. If this is not then it would be fien to update every time the workbook is opened.
View 5 Replies
View Related
Aug 3, 2009
the post 5 for the actual issue. This being my first post could not update it correctly. I have put my views int he 5th post which will be more clear.
View 9 Replies
View Related
Sep 20, 2012
I'm trying to get some vba to automatically find the range of data in a spreadsheet (So start from a specified point and loop until it's blank) and populate a combobox with this range accordingly. I have read numerous articles and posts but nothing seems to work!!
I am using Excel 2007.
View 5 Replies
View Related
Jan 11, 2013
I'm trying to make a spreadsheet that can be used to easily build a collective list of steps, for a user to read and follow line-by-line.
I want a source sheet of "steps" that I can change over time, and the resulting tabs that reference the source sheet get updated/populated automatically.
I've pieced together some VBA code from other sources, which kind of does what I want it to:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Row > 1 And Target.Column = 1 Then
Dim SourceSheet As Worksheet
Set SourceSheet = ActiveWorkbook.Sheets("Steps")
Dim TargetSheet As Worksheet
Set TargetSheet = Target.Worksheet
Dim c As Integer
Dim Source As Range
[Code]...
But there are some problems:
1) The data auto-populates into a row. It would read better if each step was in the same column, meaning rows would need to be automatically added upon selecting something from the drop-down list. The number of rows that need to be added vary based on the number of steps in the source sheet, for the selection made from the drop-down list.
2) If you make a change to the source sheet, my goal is to have the other sheets referencing the source sheet's lists of steps update automatically, so you only need to update the steps in one spot and everything you've built from them gets updated instantly. Currently, you must select a different choice from the drop-down list, and then change it back, before it populates the "new" steps from the source sheet.
This is my first time using VBA.
What I have so far is attached: testAutoPopulate.xlsm
View 2 Replies
View Related
Mar 1, 2014
In this attached example, this is a portion of a actual work procedure. The yellow highlighted cells are the same work element within the master procedure but one is for one type of machine while the other is for same model but added options. This is a pattern throughout the entire worksheet. Basically 1 model with several different types of options. I don't want to have unnecessary elements in a work procedure.
So what I am trying to accomplish, I want to create a userform or dashboard which will allow selection of model #, model type #, then based off those selections have excel populate a worksheet with all correct procedures based off model type choice.
In this example there is 6 model variations, all share same basic procedure, but all have their own work procedure based on options, so my above approach will allow me to make changes to the master procedure only instead of changing 6 procedures.
View 6 Replies
View Related
May 13, 2013
I have a table below that looks like this:
LOC
# of days
DTX
3
RTC
3
PHP
12
IOP
12
The # of days column will be a manual input. Then I have a larger table that will take those values and convert them to look like this: (Obviously the dollar values are pulled from somewhere else)
1
DTX
$ 1,292.00
2
DTX
$ 1,292.00
3
DTX
$ 1,292.00
[code]....
I've been thinking of trying to use a macro but not sure that is the best way. Using a button or something doesn't seem very elegant either.
View 7 Replies
View Related
Mar 30, 2014
I need to populate two combo boxes from excel sheet, the data will be like below:
Column A Column B
A 1
A 2
A 3
A 4
A 5
B 100
B 101
B 102
So from the above data, one combo box should hold unique values A & B.
On selecting a value from the 1st combo box A or B, respective values should be populated in 2nd combo box.
So the data should be like below:
If A is selected in the 1st combo box, then 2nd combo box should only show the values 1,2,3,4 & 5.
If B is selected in the 1st combo box, then 2nd combo box should only show the values 100,101 & 102.
Friends I need it in a macro and one important point is, this is dynamic and it is not static and the data can be more.
View 1 Replies
View Related
Mar 19, 2008
i have a sheet called 'sample database'. it consists of 56 columns, each with a specific title in row 1. i.e. name, surname, mobile_number, and so on.
from row 2 onwards the data has been populated for roughly 200 rows.
i have another 'Capture Sheet' which has the same titles as 'Sample database' except it's in a different format. its a printable form that is given to new employees when they start. once they have completed it it gets captured into the 'Sample Database' sheet.
my wifes boss now wants 1 new sheet for each row in the 'sample database' sheet based on the format/layout of the 'capture form'.
how can i get the 'capture form' to auto populate the data from the 'sample database' sheet and create a new sheet for each row?
i know this is possible i just dont know how to do it.
View 9 Replies
View Related
Sep 26, 2007
My sheet goes from monday to friday on the coulombs. On the rows i have various data sections for each day. I would like the data on the last day (any day after monday) that there is data for a sheet to input that data into the monday slot when the "master date" is changed on the cheese sheet. The idea here being that the script will take the last entered data for a given sheet, and put it into the monday coulomb on the same sheet when the date is changed. This is kind of hard to explain so if you need clarification let me know. Attached is the sheet i'm working with.
View 14 Replies
View Related
May 6, 2014
I've attached 2 test files, one is the database master file containing the projects (each row represents a project, unique reference number in column A) and the other is the blank template file i'm hoping to export data into and then save down with the naming convention "column A_column B.xlsx"
Kept the test files simple but would need to modify any code to apply to much larger database consisting of many more fields etc.
Master.xlsx
Template.xlsx
View 9 Replies
View Related
Dec 20, 2012
I'm using Excel 2010 and I applied a Data Filter to a simple table. I then messed around with the drop downs in each column, sorting the data by different criteria. After doing this, is there a simple way to get the table to revert back to its original order/form?
View 3 Replies
View Related
Jan 30, 2014
I am trying to create a "Master Sheet" where I enter in the column data and after I have entered my data for each row, I can select the button which toggles the macro to run. I have it built to build new sheets as new clients are obtained. My problem is after I have a sheet that has client's data I cannot get new data to add itself below the data that is already there. I want each client's sheet to keep adding rows as more data comes in. My current macro is :
[Code] .....
Attached File : Data Entry Macro.xlsx
View 3 Replies
View Related
Feb 8, 2014
I have a spreadsheet that is updated weekly -- but every week new info is added that needs a user to input corresponding info. I use a vlookup function to link to another spreadsheet that populates the info from previous weeks and the info that is missing shows up as #N/A...
First I was using a msgbox function to get the info:
HTML Code:
For Each b In myrange
If Application.IsNA(b.Value) Then
Employee = b.Offset(0, -2).Value
SSID = InputBox("Please enter ID# for " & Employee & " :", "New Employee Found")
b.Value = SSID
End If
Next b
But it can be up to 30 different new employees... and that is time consuming.
I would like to make it more user friendly by creating ONE userform that displays all of the employees as labels -- has a text box in which to put the ID # -- and then has a drop down box to choose the type of employee (2 options). I want all of that info to go back to the reference spreadsheet so it will be saved for following weeks, and then redo the vlookup to get the info into the new weekly spreadsheet (I can do that part)....
HTML Code:
Private Sub CloseButton_Click()
Unload UserForm1
End Sub
Private Sub ComboBox1_Change()
[Code] ......
View 2 Replies
View Related
Jul 29, 2014
I need the tabs of a project action log to auto-populate and auto-delete in a master log. (So when something is added or deleted in a tab it is added or deleted on the master) I use excel a little bit for work and personal finance purposes but I have zero experience with macros or VBA.
View 1 Replies
View Related
Oct 26, 2013
I copy/paste the data from this website [URL] ........
How I can sort all the data based upon the "Date"? The date data is not recognized when I copy/paste.
View 1 Replies
View Related
Oct 7, 2013
I have an excel WS1 set up as DB; I want to keep this sheet for data revision. WS2,3, 4, & 5 will be data that is filtered and sorted, using WS1 as source so I want to auto copy the WS1 data. Can I just auto copy WS1 (how do I do that?) then filter and sort in each WS?
View 3 Replies
View Related
