Excel 2010 :: Fails To Release Memory Allocation
Jan 27, 2014
I am running Excel 2010 32bit under Windows 7. The Excel file worked perfectly under Excel 2007 and Windows XP. The Excel file is somewhat complex with numerous links and embedded cell formulas. Occasionally, I get the following error message:
5.jpg
Before I install the 64 bit version, I attempted to chack a few other things. I opened the task manager and while viewing the process tab, I opened my Excel file. Once the file loaded, this is the allocation displayed in task manager:
1.jpg
This seemed reasonable considering the size of the Excel file (33Mb). Without changing anything, I clicked save to make sure it was working properly. While viewing the process, I watched the allocation climb, substantially. when it completed, this is what the process displayed:
2.jpg
Continuing to click the save button, without changing anything, continued to increase the memory allocation until the error message was displayed:
3.jpg
4.jpg
Closing Excel and re-openeing the file resets the memory allocation back to normal, which is a popular solution to this issue in the forums.
I did check the same issue using Excel 2007 and the memory allocation releases after each save.
I can see how installing the 64 bit version of Excel can correct this issue, and with 12Gb of Ram, I will probably use this method until I can get this fixed.
View 3 Replies
ADVERTISEMENT
Mar 2, 2012
I want to activate a sheet in the workbook.
Sheet names: "Sheet1", "Main"
When I write the code
Sheets("Sheet1").select 'fails
Why is this? This was the command that was from the record macro feature. I am using excel 2010.
View 9 Replies
View Related
Aug 23, 2012
I've been using a macro successfully for the last couple of years, but this morning when I went to use it, it decided to fail. I have a workbook which contains various spreadsheets. The macro that has failed performs the following tasks:
1. It copies a list of email addresss from an external workbook to a sheet in the current workbook (still works)
2. It copies the referral sheet I want to send to a new file, and saves it with an appropriate filename to an appropriate folder (still works)
3. The macro then creates an email with a standard subject line, attaches the new worksheet and emails it to each of the addresses as above (broken)
The error message is from Microsoft Visual Basic. "Run-time error '1004': Mail system failure. Check your mail installation."
I'm guessing there is a setting somewhere in Excel that has changed as part of an update.
I've been through a number of the options in the developer menu to remove any obvious restrictions (& reopened excel afterwards), but so far it hasn't resolved the problem.
For what it's worth, here is the macro code.
With Application
.EnableEvents = False
.ScreenUpdating = False
End With
Run "PullInSheet1"
Dim oldbook As String
[Code] .......
In case you're wondering about the pullinsheet code, I'll add it below - but I probably grabbed it from this forum a couple of years ago (like some of the above) & just made some changes.
Code:
Sub PullInSheet1()
Dim AreaAddress As String
'''''' Sheet11.UsedRange.Clear
Dim ClRange As String
ClRange = "= 'L:ADMINEMPLOY SERVICES" _
[Code] ........
There are a couple of things I've wanted to do to improve the macro, but I couldn't justify the need to spend time working it out (since writing spreadsheets isn't really my job). Since it's broken at the moment, I can...
1. I'd like to create a subject line that reflects the name of the person being referred. For some reason though, anything other than text in the cell reference caused an error for me. eg, I tried using concatenate to create my subject line, but it didn't work.
2. I'd like the copied sheet to contain all of the formatting of the original sheet. Presumably there is a paste option that will do this and I just picked the wrong one.
The mailsystem we use is Groupwise 8. I couldn't find any settings in that program that have been changed, or that I could change.
I should change the extension from xls to xlsx in the code since I'm using Excel 2010 (but changing it doesn't fix the problem).
View 4 Replies
View Related
Nov 26, 2013
I have trying to assign cards to respondents to view. I have 16 cards total which are grouped in sets of 4. Each set (of 4) is given a color, (red, green, blue, and yellow). Each color has a 4 different shades (S1, S2, S3, S4) so I have the following 16 cards:
1: Red_S1
2: Red_S2
3: Red_S3
4: Red_S4
5: Green_S1
6: Green_S2
7: Green_S3
8: Green_S4
9: Blue_S1
10: Blue_S2
11: Blue_S3
12: Blue_S4
13: Yellow_S1
14: Yellow_S2
15: Yellow_S3
16: Yellow_S4
I will have a total of 10 respondents giving their opinions who will each see 5 of the cards, randomly. Each respondents must see each color at least once (given that 5th card will be a repeated color). Each card must be tested 3 times (given that the 2 additional cards can be any of the cards).
If there a function or cell code that I can write so that I can allocate the card #s (1-16) across my 10 respondents?
View 1 Replies
View Related
Jun 10, 2014
I have a macro which filters data on one sheet and copies that data onto 34 new sheets . This works perfectly until the 25th pass when Excel advises that there is insufficient memory to continue. I assumed that this was connected to the clipboard and its ability to remember 24 chunks of data so I turned it off but still Excel gave up at the 25th pass. Is there a way that I can clear the clipboard during the macro's execution or is there something else going on?
View 7 Replies
View Related
Jan 16, 2014
I am working on a Excel sheet of 156KB. Unfortunately it is increased to around 5MB. May i know the reason that may happened and how can i retrieve that.
View 2 Replies
View Related
Jul 11, 2012
if there are any simple steps that can be taken to reduce the size of an Excel workbook short of deleting information. I have an Excel file which is taking to long to open and save. The file size is approx 5,450kb.
The file cotains Macros, Formulae, Named Ranges and Colour formatting.
View 1 Replies
View Related
Jan 23, 2013
I have the equivalent of Vlookup code(I couldn't get vlookup to work correctly) I am using Excel 2007. I have an array 2 cols x 1652 rows. I have another column of 6264 items. If a text item in the first column of the array matches a text item (minus 3 characters) in the longer column, I place the matching row from the array next to the item in the longer column. Whats not working is that the text never gets put in the cell.
Code:
Sub Macro1()
'
' Macro1 Macro
[Code]....
View 7 Replies
View Related
Sep 6, 2012
I've about 10 pivot tables in Excel that are populated via an External Query link to Access. In each case I have pre-written views with all the columns I need so that the query can just pick them up. Nine of the ten queries work perfectly, but one doesn't - reporting "Too Few Parameters - Expected 1" when I try and click on the "Return Data to Excel" in the import wizard.
I can see the column headers in Excel to select; so I'm assuming that it can parse the SQL but no results are being returned. Just to confirm though - results are returned (>8000 of them) in Access.
SQL code below:
Code:
SELECT z.pathdurationhours AS PathHours, Count(z.pathdurationhours) AS Paths,
Count(z.pathdurationhours)/(select count(*) from (select [activity date],
[conversion ID], count(*) from tbl_dfa_p2cdata group by [activity date], [conversion ID]) ) AS PCT
FROM (SELECT a.[activity date], a.[conversion ID], val( max(a.[interaction time])-min(a.[interaction time]) )
*24 AS PathDurationHours FROM tbl_dfa_P2CData AS a WHERE a.[interaction time]
"" GROUP BY a.[activity date], a.[conversion ID]) AS z
GROUP BY z.pathdurationhours;
View 2 Replies
View Related
Jun 13, 2008
Let say I have 5 shops: A, B, C, D, and E
They request for stock replenishment from warehouse as follows:
A: 4 pieces
B:2 pieces
C:3 pieces
D:3 piece
E:3 piece
But since the warehouse only have 12 pieces of this product so need to allocate to the shops in rounds that is:
Round 1: one piece is allocated to each shops (Stock left=12-5=7)
Round 2: one piece is allocated to each shops (Stock left=7-5=2)
Round 3: one piece each is allocated to A and C (the priority should be B but since B just requested for 2 pieces only which has been fulfilled) since there are no more stock
how to write the scripts to do this allocation.
View 9 Replies
View Related
Mar 25, 2014
I am trying to send bulk emails from my excel 2010 - however I am getting a POP UP. find the screen shot in the enclosed word document So every time a new mail is sent from excel we need to press the button allow Is there a way where I can turn off this warning.
View 6 Replies
View Related
Jun 29, 2013
I have a list of 500 'cases' for staff to work on and I want to auto allocate them to people based on their skills. Whilst I can do this easily with each person have their own page in my workbook, I'm having the issue of the same data being replicated onto multiple sheets.
The main data is on one page and each person has their own individual page for their cases for the day. Is there any way to avoid multiples being sent out whilst creating a kind of 'priority ladder' as such?
View 8 Replies
View Related
Nov 1, 2009
I have a spreadsheet which has a list of staff (column B) and work categories (row 3).
Row 4 is updated each day with a count of the incoming work for each work category.
I want to be able to randomly distribute (as evenly as possible) the no of work items in Row 4 between the doers (B7:B13). Each item of work also has to be checked so I would also like to randomly distribute the checking between the checkers (B16:B18)....
View 9 Replies
View Related
Jul 12, 2007
I am creating a time allocation / holiday tracking calendar. 150 employes (1 per column) and then using rows (10 - 375) as a daily track. I am having trouble with two aspects and would value your assistance.
1. i have locked the top 9 rows and would like row10 to jump automatically to todays date. i.e current info directly below the titles block
2. How do i make the calendar wrap around i.e. if someone puts in for a week holiday starting dec 31st 2007, how do i make the calendar roll round to 2008.
View 4 Replies
View Related
Aug 4, 2014
I've been assigned a project where I'm suppose to report inventory allocation to projects at end of day every Thursday. The past 2 Thursdays, I've just literally been manually plugging in the numbers into the allocated stock column.
The spreadsheet I came up with is attached. The 1st tab is the demand showing the needed quantities per item and respective due/on-site dates. The on-hand inventory (stock) is on the 2nd tab. My current process is:
1. once items have been shipped, I delete those entries/rows from the first tab. This way, only all the outstanding/open orders remain.
2. after completing #1, I then copy and paste on-hand inventory from our database (Navision) onto the 2nd tab.
3. I manually plug in the the qty for each item depending on stock available. This is the part that I would like to streamline.
Inventory Allocation.xlsx
View 2 Replies
View Related
Oct 2, 2013
I need a formula for batch allocation automatically.
See the attached file : Batch_Allocation.xlsx‎
View 5 Replies
View Related
May 23, 2012
I am trying to write a Macro to allocate a certain cost across thousands of orders. The number of orders will obviously change monthly. The cost is relatively small, and when divided evenly by the total orders needs to be rounded up to the nearest cent (Typically $.01 - $.02)
I then need the cost to be insered in a colum running next to a total cost column, but I need it to stop when it reaches the total cost and just start adding zeros to the rest of the orders so as not to overcharge.
Not sure if I need to incorporate solver somehow. I figured I would reference the allocated cost from a cell in the worksheet but not sure how to insert any algebraic logic into a macro.
View 9 Replies
View Related
Nov 26, 2006
I am reposting this as my previous post was deleted.. i dont know the real reason for the same...
The raw data in the attachment contains:
•C1 to AI1 refers to vehicle numbers.
•Column A refers to Shift Time
•Column B refers to Number of vehicles required in that particulars Shift time
The output:
•As you can see in the Sheet “Output Required”, fields marked in the color “light green” are manually allocated vehicles numbers available and required according to shift time
•The logic used behind allocation is the same vehicle should not be used before or after within the span of 3 hrs, the gap between the vehicle usage before and after should be minimum 3 hrs. And the maximum time gap can be any value.
•Vehicle usage can be maximum (ie. You can use the same vehicle by rotating within 24 hrs but keeping in mind that it is not used before 3 hrs).
• all the available vehicles must be used before the same used vehicle is used in the new shift... ie. You should utilize all the vehicles before one is duplicated
View 9 Replies
View Related
Apr 27, 2007
I m creating a single cell formula in 'report'B3 that would allocate 'data'D3 appropriately by month heading if copied across. A few other threads on this topic only acheive this by creating an addtional row, not in a single cell. Since I'm going to use this on a report in Access, I just need the calculation. Is it not possible to acheive this in a single cell?
View 2 Replies
View Related
Jul 24, 2008
I have been asked to go through some information which has over 200 000 lines, what I need to do is as follows:
where order number is unique, revenue source = "Unique"
where order number appears more than once, check division to see if it appears in more than one division, if it does revenue source = "Cross Selling", if it does not then revenue source = "Divisional Package"
I need all of the above in formula line which will be inserted in the revenue source column
I have attached the file with a sample of the information I am using.
View 9 Replies
View Related
Feb 25, 2009
The task involves summarising about 10,000 lines of data into months by Plant by Process. I can achieve it by stepping through a couple of schedules but I'm sure it can be done using one formula (but I can't find it!).
View 8 Replies
View Related
Aug 31, 2012
I'm fairly new to excel and trying to create a simple spreadsheet to provide a log of staff allocation. I've created a first a sheet displaying a table with a week of rota. The first column lists where the staff are placed, the first row the date and inbetween the staff member covering that date. There are 5 further sheets, one for each member of staff with a simple table - first column is date, second is allocation.
Back on the first sheet below the timetable is a further grid showing on the first column staff names, and below each date a formula =VLOOKUP( B$3,David!$A:$Z,2,FALSE) pulls information from the 5 sheets displying whether a memeber of staff is on leave or there allocation on that particular day.
The problem i'm having is trying to get the 5 simple staff sheet to pull data from the Rota ie. I need say B3 to look at the date in A3, find the same date on the Rota sheet, look for the relevent staff name below it (if present), and display the allocation from the first column on the same row as the staff member.
I've tried a combination of Vlookup with Match and Index with Match but nothing seem to work.
View 7 Replies
View Related
May 15, 2014
On the attached sheet in column X, I am trying to input the Allocation percentage dependent on a number of variables:
Type (Bar, Blank, Coil, Sheet, Special)
Sub Fam Code (2A02, BC02-05, BC99, BZ99)
Sup Category (Arcelor, Independent, Tata/ Corus)
The allocation percentage is based on the below; anything outside of this should result in "Other".
Sheet (BC02/03/04) A=40%, T=40% & I=20%
Coil (BC02 & BC03) A=40%, T=40% & I=20%
Coil (BC04) A=30%, T=50% & I=20%
Example 1:
Type - Sheet & Coil
Sup Category - Independent
Result 20%
Example 2:
Type - Coil
Sup Category - Tata/ Corus
Sub Fam Code - BC04
Result 50%
Example 3:
Type - Coil
Sup Category - Arcelor
Sub Fam Code - BC04
Result 30%
View 1 Replies
View Related
Mar 5, 2012
I have created a macro in excel 2010 which enable the file to save (extract) data into separate location and name. The vba code for macro is as follows: Question: How can I save this workbook with reference to the value containing in cell B2? (it is named temporary now - as defined in the code)
Sub aaa()
'
' aaa Macro
'
[Code].....
View 1 Replies
View Related
Jul 9, 2012
Recorded macro. The hope is to insert a excel formatted table a set number of times. I have found a loop code that references a Cell A1 and repeats that amount of times. So if A1= 10. There should be 10 tables inserted. However on the second time there is a fault with the table name. I need the name to change each time the loop is run. ie Table1, Table2, Table3 etc up until the loop stops (A1 contents).
I am using excel for windows 2010. The macro that i have so far is below.
Sub LoopTest()
Dim n
Dim V
Range("A1").Select
V = ActiveCell.Value
[Code] ........
View 1 Replies
View Related
Apr 1, 2014
I am trying to adjust the below macro so that it will work in Excel 2010.
Sub OpenAndProcess()
Dim fs As FileSearch
Dim I As Integer
[Code]....
View 3 Replies
View Related
Dec 15, 2006
I have name 28 columns. The range in EACH columns is 6:14000, i.e. the first name is date and the range is from Row B6 to Row B14000.
I am using SumProduct instead of VlookUp to look up values. An example of one of my sumproduct formulas:
SUMPRODUCT(--(Date=$B$6),--(Book=$D$6),PnL___Book)
where the first columns has dates, the next column is bookname and the last column is the profit and loss for each book, i.e. the values that need to be addad.
Now, suddenly I do not get any numbers but just #VALUE! but if I change the range to a lot less, e.g. between Row B6 and B50, it works.
My questions is if this has to do with memory in Excel. Are there limits to how many formulas and how many names you can have before Excel crashes. I am aware that the 28 columns names are very large.
Are there any way of how to get around this, VBA-codes or other formulas that uses less power, not naming columns or what?
View 9 Replies
View Related
Oct 29, 2009
I have an excel sheet that has an onclose macro, and on certain computers i get an error message stating out of memory. can anyone explain why this is and how i could avoid it, by possibly clearing the memory first or something?
View 9 Replies
View Related
Aug 22, 2008
i have a spreadsheet on Excel 2000, which is 256 column's wide and 4000 long the only formulas are countif which start at row 1000-4000 and are copied to column 256. Just for the one sheet it is 14mb is this normal
View 11 Replies
View Related
Mar 31, 2009
I am currently using Excel 2003 to pull from 2 external spreadsheets to compile data. The first sheet (seniority list.xls) being referenced contains all of our employees (approximately 350 rows, but that can vary from 340 to 450) as well as some information (employee ID, full time or part time, etc.). The second sheet being referenced (pay.xls) contains a breakdown of all employees and their pay for a particular bi-weekly period.
What I'm looking to do is:
(1) Find out all of my current employees. I do this by referencing seniority list.xls.
(2) For each employee, find out how many hours they worked each week. I need to do this by referencing pay.xls. Unfortunately, that file works quite differently than seniority list.xls. Unlike the latter, which contains one employee number per row, pay.xls could contain as many or as few rows per employee as their schedule dictates. Each row contains things such as overtime, regular time, double time, alternate regular time, alternate OT, vacation, sick pay, etc. In total, pay.xls could contain as many as approximately 8000 rows. To determine how many hours they work, I'm using this CSE (array) formula:
(Note that the employee ID is in column A of the current sheet.)
View 9 Replies
View Related
