Auto Capitalization Of Words
Jul 30, 2012
I am having problems with auto capitalization of words. I want to be able to enter words into a cell and have it auto capitalize in proper grammer ie: Name, the, or, and, 's. The problem I am having is that every word gets capitalized along with the 's.
View 2 Replies
ADVERTISEMENT
Jul 25, 2006
I've noticed that when one pick up a value (word) from a cell in excel and try to use it in a form that it needs to be exactly the same (e.g. if a letter is capitalized in the cell, and not in the form, it wont be recognized as the same). So i was wondering if there is a command that one can type so that the form doesn not read the word for its capitalization but for the letter in it.
View 5 Replies
View Related
Jul 17, 2008
when typing in a cell in excel, I sometimes need to put my initials in lower case at the end of a comment, indicating that I have responded in that cell. When I do, the first of my two initials changes to a capital instead of lower case. Can anyone tell me where to turn this feature off?
View 9 Replies
View Related
Jul 14, 2007
I'm making an order form and I want specific cells to ALWAYS display their contents in caps regardless of how text is entered, is there a way to do this? I looked all through formatting and could not find the option, I found the command for =Upper but that doesn't work if you put it in that same cell then type over it obviously.
is there a way to use an =upper command that'll make an entire block always print in caps?
View 10 Replies
View Related
Jul 16, 2009
I've been using conventional method to do this and it's time consuming. I would like to total up 2 column. A multiply B to be exact. Below are some examples:
Table 1 - Before totaling up:
Quantity
Product
5
2 x Button A White
3
4 x Button B Pink
4
5 x Ribbon A Black
2
3 x Thread A White
6
2 x Cloth A Blue
Table 2 - After totaling up:
Quantity
Product
10
Button A White
12
Button B Pink
20
Ribbon A Black
6
Thread A White
12
Cloth A Blue
I need to have the sum of the "Quantity" multiply "Product". Or in short A x B.
And the end result need to have the number and "x" sign removed while keeping on the the products names. (2 x ) Take note it's "number" space "symbol" space.
View 9 Replies
View Related
Jul 21, 2013
For example, on column X, if I type 20, bob or bobafett it type 2.0 instead but on column I if I type bob, it will type 3.0
they would all be edited manually
or even better, no matter where I type it on excel, it would go in the right column, like bob X, then it would change to 2.0 and go directly in the X column
View 4 Replies
View Related
May 20, 2009
it's possible to select a group of cells, or a column, and then have specific words (and the colon), like Email: Tel: Fax: and URL: found and removed?
I've got a list of contacts one after the other in a column like this
John
Accountant
456, Hillside Drive, Hamley
Tel: 09189374884
Fax: 0284764654
Email: john@email.om
URL: ww.johntheaccountant.com
The number of lines per contact isn't always the same.
Can it be done without Macros?
View 9 Replies
View Related
Jun 28, 2008
Is there any way for excel to automatically choose the next best spelling option for many rows of data containing mispelled words? For example, is there a way to automate pressing "Change" on every mispelling window when pressing F7?
View 8 Replies
View Related
Jan 21, 2009
Is there a way to format a cell such that regardless of whether or not an upper case alpha character is entered, the character will appear in upper case?
View 9 Replies
View Related
Apr 1, 2009
I have 40K asset list with different Capitalization dates, the depreciation will start either in the mid month, mid qtr or mid year (determined by dep key)
The goal is to come up with a accumulated depreciation up unitl 12/28/08.
The problem I`m running into is getting the depreciation start date (due to different years)
This is what I`m doing right now:
ie. asset cap date 12/5/2004
1. extract month: Dec
2. Extrac year: 2004
then I have table that says if the Month is Dec then the depreciation should be 12/15. However, when you enter 12/15 excel automatically adds in 2009. How do I replace the 2009 with 2004 ?
View 9 Replies
View Related
Dec 2, 2013
I have a row of addresses - each was typed by users on website.
examples:
po box 1451 (would like to see: PO Box or P.O Box or P.O. Box)
PO box 427 (same here)
1735 park st. (would prefer 1735 Park St.)
View 3 Replies
View Related
Dec 19, 2008
I want to end up with is when I type text in any row of the Master sheet, I would like the entire contents of each row to automatically be repeated on the worksheet of the same name (as per column O). For example row 5's contents from the Master sheet would duplicate into the sheet named Accommodation. In addition, should the details ever change in the Master, this would need to be reflected in the individual sheets also. My only concern is that I'd like the individual sheets to fill from the top rather than match the exact row number position from the Master, ie row 5's contents to be placed into row 2 of the Accommodation sheet seeing as it's the first occurrence, and row 6's would go into row 3 etc.
View 2 Replies
View Related
Dec 19, 2008
I want to end up with is when I type text in any row of the 'Master' sheet, I would like the entire contents of each row to automatically be repeated on the worksheet of the same name (referred to by text entered in column O). For example row 5's contents from the Master sheet would duplicate into the sheet named 'Accommodation' as O5 contains the word Accommodation.
In addition, should the details ever change in the Master, this would also need to be reflected in the individual sheets. My only concern is that I'd like the individual sheets to fill from the top rather than match the exact row number position from the Master, ie if row 5 had the first occurrence of the word Accommodation in column O, the contents of that row would be placed into the next available first blank row of the Accommodation sheet, which in this case would be row 2 as the headings are on row 1.
View 9 Replies
View Related
Sep 20, 2006
I have a column of words in Column A and I want to replace all the times that these words appear in the rest of the excel sheet with the words in Column B. If someone has already answered a similar problem link me to the thread because I can't find anything.
View 5 Replies
View Related
Jun 3, 2014
I'm looking for a macro to remove all words (in a single word per cell format) in a range (approx 100 columns & 7000 rows), except for a list of 100 words.
I'd prefer to email the file if that's okay.
View 7 Replies
View Related
Jun 23, 2006
I am trying to find certain words in a column and delete the word and characters following. For example, Say I have a column of info as seen below. This is a test of me. I am just experimenting with this stuff. Deleted (6/15/01) Let me know what you think. I am not sure about it all, but I guess I will figure it out. riviledge1 (01/05/06) Now let's see what happens when I try to test it.
I want to find all the "Priviledge1 (01/05/06)" and replace with nothing. Please note, the date will change with each record, so I need to figure out how to tell Excel to find "Priviledge1", delete it and the date behind it. So I want to delete "Priviledge1" and the next 11 characters including the space.
View 3 Replies
View Related
Feb 4, 2013
On to the topic, I have all the US and Canadian states abbreviated (CO = Colorado, etc.) and was wondering if there is a way to make all of them convert to their respective names in one fell swoop instead of writing it in for each one, one at a time. Something along the lines where I can make, CO = Colorado, TX = Texas and then hit enter and all of the abbreviations would convert. Some kind of command.
View 2 Replies
View Related
Jan 22, 2010
I want to sort on number of words, i.e. if a cell contains 1 or 2 words etc, with the cells containing 1 word coming first then cells containing 2 words. Also, if possible, first the cells with fewer characters.
View 9 Replies
View Related
Nov 9, 2006
I have tried Sumproduct and Countif and can not get a proper count of rows that contain specific words in multiple columns. I have attached an example spreadsheet where I am looking for a result of 7 rows that contain 1 to 4 specific words within phrases. The example looks for the words: "virus", "spyware", "malware" & "adaware", and ignores any other words like "aware" or "ware".
View 7 Replies
View Related
Feb 15, 2007
I have 4-5 separate lists of words/letters and I would like to combine them in a certain order but creating all possible combinations resulting a new word. It's like a conjugation tool for verbs. For example if List 1 = be/el/ki/meg; List 2= m List3=e/é; List4= gy/" "; List 5=" "/ek/sz/nnek So the output has to be (if the order is List1+List2+List3+List4+List5)= bemegy/bemegyek/bemegysz/bemesz/bemész/elmegy/elmennek/ ..... and all possible combinations.
Preferentially I would like to automate it in a way that it straight outputs into MS Access. Also can it be automated that it reads the list from a file (database)?
(Also can it recognize the word by letters? Because the basic word that I would load the program= List2+List3+List4)
View 2 Replies
View Related
May 27, 2014
I have the following code:
[Code] ....
When I run the macro, some columns are already hidden. The macro doesn't seem to autosize cells correctly. For instance, one cell in a row appears to have some contents hidden (or below the reading area of the cell). In other instances, the rows are auto-size to huge heights and widths.
View 7 Replies
View Related
Jul 29, 2014
I need the tabs of a project action log to auto-populate and auto-delete in a master log. (So when something is added or deleted in a tab it is added or deleted on the master) I use excel a little bit for work and personal finance purposes but I have zero experience with macros or VBA.
View 1 Replies
View Related
Jun 19, 2009
Making a mission tracker that requires less upkeep than my units previous methods. I am using Excel 2007 and have some things in mind that I would like it to do.
On the down side, I have only basic experience with excel and have never used macros or VBA.
Even if what I am after could be solved with functions (which I prefer), I simply do not quite know how to make what I want without assistance. Ok, now on to the description.
The mission tracker aside from showing a list of the missions we have done during our program, it needs to also generate metrics automatically. In my worksheet, I am using columns A-G and rows 1-501.
The mission scheduling type in Column E are listed below. The letters on the left are what I am using in the sheet, the part to the right is what it really means:
Column D has the day of the week listed as: Mon, Tues, Wed, Thurs, Fri, Sat, Sun.
now the metrics I need to be generated are the number of different types of each mission compared, how many of each type of mission was flown per day of the week, how many of each type of mission was flown per month.
Basically what I need is a way to automatically count the number of rows that meet a specific criteria throughout the range. This would require being able to check the value/text of multiple cells at a time and count the number of rows that meet that criteria.
[SOLVED] 1. The first part would be to have the worksheet be able to count the number of each type of the 9 mission scheduling codes throughout the range. I would be storing the count in new cells that would then be connected to pie charts.
[SOLVED] 2. The second part would be to count the number of each type of mission that was flown per day of the week. That would require searching both mission type and day of the week. All I would need is a working formula for 1 set, then I could switch mission codes and weekdays to match all the 63 possible outcomes.
3. Knowing the number of each type of mission flown per month. This would be checking the date and the mission type. The trickier part that comes up in my mind is that our programs span multiple calendar years, so it would have to track it by month and year, that way there is a difference between Jan 2009 and Jan 2010. The counted numbers would be used to make histograms. It would be nice if the chart titles could be automatic based on the dates inputed in the mission tracker. If I needed to choose a maximum time length for it to cover, I would pick 3 years.
4. I would like to figure out how to make an inputted line of data on the main tracker sheet to create a copy in the corresponding worksheets based on schedule type, that way a person could look at/print a specific type without having to sort the main list.
The actual goal is to make it where a person can enter the 1 line of data per mission (cells A-G) and the mission metrics update automatically after each mission is inputed allowing upper level supervision to have current information quickly whenever it is needed. Currently we need about a weeks lead time to get the information asked for on our current progress.
View 10 Replies
View Related
Jan 7, 2008
Within a data validation selection, are you able to do both Auto Complete and Auto Delete? I have this posted at another forum [url]but have not been able to find a solution (a copy of the file, test. zip is there as well). I am not sure it is possible, or, at least I have been unable to get it working. I can do each, but not both.
I have also been utilizing:
[url]
[url]
View 5 Replies
View Related
Jun 27, 2014
I have one worksheet that contains a large table. I'm using VLOOKUP to spread each row of the table to separate worksheets.
When VLOOKUP refers to an empty cell, is there a way to set that row to be hidden?
Also, if VLOOKUP returns data to a cell, is there a way for Excel to automatically set the row height to display all of the linked data in that cell?
View 13 Replies
View Related
Jun 27, 2014
I have one worksheet that contains a large table. I'm using VLOOKUP to spread each row of the table to separate worksheets.
When VLOOKUP refers to an empty cell, is there a way to set that row to be hidden?
Also, if VLOOKUP returns data to a cell, is there a way for Excel to automatically set the row height to display all of the linked data in that cell? There is only one column of data.
View 1 Replies
View Related
Mar 11, 2014
Possible to auto count and auto sum based on Unique ID.
Download link to the file in question [URL] ..........
So for Example ID 79125 should get a sum 537.39 and count should be 12, also in any given week like 50 , 51 , 52 , week 1 etc.., duplicate entries must be all counted as 1
View 8 Replies
View Related
Jul 31, 2013
I am trying to auto generate a calendar based on two drop down menus - Month and Year.
Once the month and year is selected I want to import all work orders onto the calendar based first on the "Labor Name" found in the list of work tab, then assign each work order for that labor name to the respective date on the calendar for the month.
August PM Schedule Demo.xlsx
View 2 Replies
View Related
Jan 10, 2012
I have dates values in 3 columns.
A1 - Header - "Holidays in XXXX'
B1 - Header - "Holidays in YYYY'
C1 - Header - "Leaves by YOU"
A2:B11 have static dates consisting of 10 dates in each column.
C2:C11 - the user may enter any date at any point of time.
I would like to auto-merge the dates in all the 3 columns (A2:C11) in a single column say D2:D31 and then the system should auto-sort the column based on dates in any one order. So as soon as the user enters a value in say cell C2, all the 10+10+1 dates should get sorted.
Also the constraint here is a user may not apply all 10 leaves at in a year. So many of the cells may have blank values.
View 1 Replies
View Related
Jun 21, 2014
I want to be able copy certain things from cells. Is there a way to make excel copy only the name from cells containing this (One name in each cell):
VESNINA E. (RUS)
PAVLYUCHEN. A. (RUS)
KERBER A. (GER)
I basically want to cut out the (...) in all names. I could do it manually, but there could be quite a few players.
View 3 Replies
View Related