I'm trying to setup a macro to run on a database extract that is sent to me. Some of the data is not filled in for each row and I want to automate the auto fill down for each entry based on the Reference # above. I searched the forum for terms that I thought might be related,
Here is the starting data: ...
I have 2 sheets in the same workbook (sheet 1 & 2) with one matching column (A) of info and need them to combine and fill the missing data. Each sheet has identical column heading and the amount of data is not the same; sheet 1 has ~2000 rows and the other ~5000. Sheet 1 is consolidated so I would like to fill in the missing cells from sheet 2.
Ex. Sheet 1.......
Ex. Sheet 2.....
As you can see, the missing cells in sheet 1 could be filled from the data in sheet 2; also note that the above info is on different rows (and will be random for each case). I only want the columns to fill in that have a matching email, the other 3000 rows in sheet 2 do not match with sheet 1 and I don't want the rest of it to transfer over.
new data goes into the report, the pivot table looks at a dynamic range and confirmed that the range doesn't select any empty cells.
Just wrote a macro to fill missing cells with a data on workbook open.
all the data is date form, yet still when i refresh the pivot table i look my montly grouping, when i try to group again it says "unable to group"
I have a list that is streets and addresses. All contained in column A. Cell A1 is the street name and then Column A3 is the street number. This repeats down column A for almost 1000 street names. I need to fill column B3 with the street name, as well as B4, B5, B6, etc until the street name changes. I was trying to do this with an if..then but couldn't get it to work. I also tried to work on a do.. loop looking for the change from a string to number. But my programming is a little rusty. If anyone can help I was be forever grateful. I mean the alternative is to sit here and copy and paste all day.
ABBEY CT
1700
1700
1703
1703
ABERDEEN LN
1305
1313
1321
1321
I am trying to use the auto fill series but I need the series to start over every time the value change in another column.
If i use the auto fill series, it will copy 1,2,3,4,5 and so forth til the end of the column. In this case, i need the auto fill or some other function that will restart once it encounters a different value under the ID column. I've started below to show an example.
IDNo
0.11141
0.11142
0.11143
0.1121
0.1122
0.1123
0.1124
0.1125
[code]....
IF I enter 01-09 in B10 or B11 or B12 want autofill FIRST in C10, C11, C12
11-19 in B10 or B11 or B12 want autofill SECOND in C10, C11, C12
20-29 in B10 or B11 or B12 want autofill THIRD in C10, C11, C12
HOW TO DO THIS ?
I have a startdate F1 and an end date G1. Is there a macro that can list all dates by day within that range into column I7:down.
View 9 Replies View RelatedI have fixed data:
Michael = Resident
Joan = Intern
Patricia = Consultant
James = Nurse
what I want is every time the name (eg Michael) appears in column A, the title (resident) auto fills in column B. Do I need to put a data source for this?
i've got on sheet "employee" in cel A - ID of employee and in cel B emlpoyee first and last name...now i would like to have in OTHER sheet "monthhours" when i enter ID of employe in cell A that in cell B excel automatically enter first and last name of employee that have got that ID...
A B
ID
FIRST LAST NAME
1
NAME
2
NAME
3
NAME
[code].....
-------a--------b-------c d e f
1 f200:f299
2 f400:f499
3 f600:f699 - (I would like to drag and fill every cell in column A, adding 200
4 auto cells to each cell.)
5 auto
Find herewith attached file of xls... for my query..
Test.xlsx‎
I have been tasked with creating a workbook that will take a time log file (excel) from an electronic time clock and import the dates/times into individual employee timesheets. The timesheet layout has already been provided to me and cannot change.
I’m really struggling here and would appreciate any help.
Please reference the attached workbook for the issues described below:
1) Sheet "1_attlog" is the log that is imported from the electronic time clock.
2) Sheet "Sorting & Filtering" is what I have developed so far that manipulates the data from sheet "1_attlog" into something that can be easily understood, it also matches employee #'s to a name, and allows for date ranges to be set that copies over to the individual timesheets. Please do not change any formulas on this page if possible.
3) Sheets "#2 Dan through #10 Blank" are all individual employee timesheets that I need to import the data from "Sorting & Filtering" and populate the "Time In" (column D) and "Time Out" (column G) based on matching the data from "Sorting & Filtering" sheet, "Time Clcok ID" (column D) "Date" (column E), "Time In" (column F), "Time Out" (column G), "Emp Name" (column I).
The dates on the individual timesheets have been linked to the "Date Range" (cels F2 & F3) on the "Sorting & Filtering" sheet, please keep this link intact.
4) The individual timesheets already have formulas inplace to calculate the hours worked after the "Time In" and "Time Out" data has been imported.
Excel 2003, I have a list of products with corresponding prices located on a hidden worksheet. I have a spot on another worksheet where users can select a certain product and next to that cell there is a column for price. What I want excel to do is auto-populate the price cell based on what product the user selects. For instance, if the user selects OD2000N, then I want the price to auto-populate with the corresponding price that is found on the hidden sheet. Like I said before, I know this has probably been answered, maybe even mulitple times but I can't seem to find the appropriate thread.
View 9 Replies View RelatedI have a userform [AddEditMove] with a bunch of textboxes (something like 30) that create entries in a spreadsheet ["Move Records"] along one row. In addition to creating those basic entries, the textboxes also fill in other spreadsheets after manipulating the entered data in various ways.
Therefore, if an entry needs to be changed, it needs to be changed from the userform rather than just on the main sheet, or those other actions won't be taken. At least, that's how I see it now. I'm interested in knowing how other people have handled similar set ups.
Right now, what I think I'd like is for the user to be able to double click any entry on the main sheet and have that action call up the userform and autofill the data from the sheet so the user can change what they need to change and then update it. It would also require a tweak in the userform code -- "if called from cell click, then fill info in selected row, rather than next empty line" -- if that's possible.
I have data in several rows whereby my column D looks like this:
FebtReport14_01.0000
FebtReport14_02.0000
FebtReport14_03.0000
FebtReport14_04.0000
FebtReport14_05.0000
Throughout the week, additional data is added to the rows, thus creating blank cells within this D Column:
FebtReport14_01.0000
FebtReport14_02.0000
FebtReport14_03.0000
FebtReport14_04.0000
FebtReport14_05.0000
Is there a macro i can run which will re increment only the blank cells to look something like this?"
FebtReport14_01.0000
FebtReport14_02.0000
FebtReport14_03.0000
FebtReport14_03.1000
FebtReport14_04.0000
FebtReport14_04.1000
FebtReport14_04.2000
FebtReport14_04.3000
FebtReport14_05.0000
Also , I will be adding new data quite often, in which newer rows may need to be added in between: ie:
from this
FebtReport14_04.0000
FebtReport14_04.1000
to something like this:
FebtReport14_04.0000
FebtReport14_04.0100
FebtReport14_04.0200
FebtReport14_04.1000
I have two columns which i want to compare, they contain text data such as A123.
what I'd like is if its in column A and not in Column B then add to bottom of column A.
Once its in column A i can do the vlookup's to draw the other data, costs etc, over but don't know how to identify, and add, the missing codes to the list.
I get given a csv file on a monthly basis which contains consumption data per day for the specified period. This sounds simple but on occasion (more often than not) the data has missing days. This can cause me problem later on in my analysis.
I can happily total the monthly consumption using the date and month text. What i want to do however is to sort the csv file into daily consumption and highlight the missing days i.e. have a range of the days in the month and allocate the daily data to the correct date. I currently do this manually but know that there must be a better, automated approach... searching for matching dates for example?
In my head i'm thinking the following approach but lack the coding skills to do it.
1. Define the start and end dates. Perhaps count the number of days between the two dates and autofill the start date down the appropriate number of days in column A?
2. Paste the csv file into a different sheet and, starting from the top, cut and paste the csv data to the correct date created in step 1. Do this for each row based on the csv data.
I am busy with a very large dataset +-20 000 records showing the movement data
and I am having problem with inserting missing data: I have columns titled day hour and position, but multiple records for each as data was initally recorded by second. Data looks like this
Day Hour Position
1 2 Z5
1 2 Z5
1 3 Z5
1 3 Z4
1 16 Z1
12 2 Z3
13 0 Z3
What I need to end up with is a sequential dataset running from day 1 to 388 with hours 1-24 of each day. Positions need to be filled in for all data recorded (see above). The big problem is that movements between positions need to be recorded and accounted for i.e if more than >80 of time was spent at the position Z3 then that is the position for the hour.
i have a time series of data at one hour interval ( from 6:00 hrs to 18:00 hrs ) each day and again from 6:00 to 18:00 hrs next day and so on for several years. in this series many data are missing. i ve to fill in these missing data in such a manner so that the new values becomes the linearly interpolated values in between the data given at any two hours. no rows are allowed to be inserted in between 18:00 hrs of the previous day to 6:00 hrs on the next day. pl see the attatchment.
View 2 Replies View RelatedIs there anyway to automatically fill the empty added cell after inserting a row without using the fill handle? For example, for a series of numbers: [URL]
2. Drag the fill handle Selected cell with fill handle across the range that you want to fill.
Or running balance: [URL]
2. Extend the running balance formula into the new rows by selecting the last cell in the balance column and then double-clicking the fill handle.
I am having trouble getting a VBA code to do the following:
2012/05/01 00:00:00
2012/05/01 00:03:00
2012/05/01 00:06:00
2012/05/01 00:15:00
2012/05/01 00:18:00
From this above to this below
2012/05/01 00:00:00
2012/05/01 00:03:00
2012/05/01 00:06:00
2012/05/01 00:09:00
2012/05/01 00:12:00
2012/05/01 00:15:00
2012/05/01 00:18:00
There are data entries next to these time stamps. I am able to create just the time stamps starting at the beginning and ending at the end of the month but I need it to fill in missing entries in a data set. The code below works but only some of the time. I have tried a few different things but nothing works.
Code:
Sub Insert_missing_3min()
'Inserts a row with the date and time where the missing date and time stamp is and a zero next to the date added.
Dim min3 As Date
Dim CurTime As Date
Dim CurCell As Date
Dim NextCell As Date
min3 = 3 / 24 / 60
[Code] ........
I have a sheet with a date and the number of months on it which will change. I need the sheet to list the dates in a column for each month automatically: e.g. Two cells contain date “jan07” and the period “10” months. The rows A1 to A10 should have jan07…jan16 listed automatically. If I change then change the number of month to 11 I would like the rows A1 to A11 to update automatically.
View 6 Replies View RelatedI am looking for a formula that I can use in the lower table to fill in the missing County cells, based on the values in the Town/Zip columns on the top table (I apoligize for the crudeness):
CountyTownZipAbleTownA00000AbleTownB00001AbleTownC00002BravoTownD00003BravoTownE00004CountyTownZipMemberTownD00003BlackTownC00002FrankTownA00000GreeneTownB00001JonesTownA00000SmithTownC00006ThomasTownE00004White
This would consist of hundreds of Zips and Towns and this is just an abbreviated mock up.
I have a spreadsheet which has number of formatted rows, the user can insert the formatted rows if they need more as its hard to determine if they will need one set or 50 sets.
The formatted cells are 4 rows deep and span from columns A to AR
The thing is that I want the totals at the bottom to automatically pick up the sums from say Column H but only on the 2nd row of each set of formatted cells eg. H13, H17, H21, H25 etc.
And another sum to pick up the 3rd row, e.g H14, H18, H22, H26 etc
Obviously this can be done manually by selecting control and AutoSum but I wondered if there was a pice of VBA code or a formula that i could run due to some worksheets being longer than others?
My macro is missing following excel shutdown and autorecovery, it still runs but when I open the relevant module the module is empty, and I can't view the code
View 4 Replies View RelatedI have tried many different ways of coming up with a solution of this problem without writing a VBA program, however, Excel's date and time formatting scheme seem to be tripping me up. As a result, I am trying to figure out what direction to go.
I have seached the board up and down looking for a solution and I have found one problem that is midly similar but I do not fully understand the code. I have tried to modify it but to no avail.
Here is my problem:
I have 9 columns of data that are reported in 15 minute intervals for a little over 3 years. There are missing data in the data set and it would be infeasable for me to manually find and replace the missing data. (Over 110000 rows of data)
Example of data (Where "/" delienates column seperation):
Date / Temp 2m / Temp 10 m / Radiation / RH / WindAve / WindMax / WindMin / Rain
6-1-06 12:15 am / 45 / 35 / .0001 / 95 / 5 / 7 / 3 / 0
6-1-06 12:30 am / 45 / 35 / .0001 / 95 / 5 / 7 / 3 / 0
6-1-06 12:45 am / 45 / 35 / .0001/ 95 / 5 / 7 / 3 / 0
6-2-06 6:00 pm / 45 / 35 / .0001 / 95 / 5 / 7 / 3 / 0
6-2-06 6:15 pm / 45 / 35 / .0001 / 95 / 5 / 7 / 3 / 0
So what I need to do is this:
1) Find which data times are missing
2) Add the appropriate amount of rows in between where the missing data would be
3) Add the correct dates to the new rows
4) Add "N/A" to the columns that have no data
You can see that my date and time are formatted in mm/dd/yy hh:mm
I found this on the website and was trying to modify it to my needs:
Sub InsRow()
Dim c
I have 4 columns
Column A is "Customer Number"
Column B is "Date Can Opened"
Column C is "Month" (currently blank except header row)
Column D is "Year" (currently blank except header row)
I would like a macro to do 2 things here....
1. Extract the Month part of the "Date Can Opened" column and put it in column C.
2. Extract the Year part of the "Date Can Opened" column and put it in column D.
Currently, the "Date Can Opened" column is formatted as a date like */14/01 taken from the Number tab in the Format Cells dialog box) ...
Is there some easy way to fill out column B referencing column A, but only incrementing by 1 row in A every 2 cells in B?
Example:
Column A:
A1 = 1
A2 = 2
A3 = 3
etc...
Column B (I would like to fill this, referencing column A):
B1 = A1
B2 empty
B3 = A2
B4 empty
B5 = A3
etc
I am after a macro to insert a column lets say between column A and B. Once column inserted new column B should be filled by a text say "January" but it should be only filled upto the data of column A so if column A has data upto A600 then column B should be filled from B1 to B600.
I tried recording but it fills data upto B65000+.
I have a spreadsheet that I need to fill up the columns of blank cells stopping when it reaches data above and not overkeying it. If the data was at the top I could fill down and do this by highlighting the column, go to blanks, put in = then ctrl enter and it works, but when I fill UP I can't get this to work since it changes the active cell. Below is an example of what I have on the left in a worksheet and on the right hat I need it to look like. How to fill up without overkeying the data above it. When I fill up it makes the whole column AA Category 1 total and that's not what I find.
unit 2 total
BB category 1 total
division 2 total
unit 2 total
division 2 total
I need to to look like this:
BB category 1 total
division 2 total
unit 2 total
BB category 1 total
AA category 1 total
division 1 total
unit 1 total
[code]....