Filter below:
Code:
Sheets("Sheet1").Range("$A$3:$AO$64999").AutoFilter Field:=1,
Criteria1:=Array("0" _, "1", "2", "3", ""), Operator:=xlFilterValues
Now I would like to change to exclude these values, tried some tricks, like:
Criteria1:=Array("0" _, "1", "2", "3", ""), Operator:=xlFilterValues
but not working.
Code:
Selection.AutoFilter Field:=5, Criteria1:=Array("CHF", "DKK", "EUR", "GBP", "NOK", "SEK", "USD")
I am trying to use VBA to filter a list for not equal to. See line above. I want to filter a table I have for unknown Currencies basically.
I thought I had been able to use array to have more than two criterias with Autofilter, but now I am unable to make the following code work. What I am trying to do is have all the records that does not contain either N/A, S/O or xx and also have a filter on column 125 for the value "OUI".
VB:
Sub test()
Set ws1 = ThisWorkbook.Sheets("SOMMAIRE_EN_ALL")
Set ws2 = Workbooks("Fichier_central_2013_anglais_2_CLEAN").Sheets("DETAIL_CONCAT")
Set r = ws2.Range("A1:du4783")
[Code] .....
I want to perform some operations (basically a secondary filter) based on the values which are currently filtered within a single filter column.
.Autofilter.Filters(n).Criteria1
and
.Criteria2
are great, but what if there are more than 2???
i.e. I have a column containing values L01 to L20.
My column is filtered on L05, L06 and L07 (or some other combination).
I want to extract the values and L05, L06 and L07 and do what I will with them.
I'm having a hard time making this maro work in Excel 2010.
I need it to filter out the items "AR", "BATCH", and the line of "Total:*" where the * is a total amount of any given number dependant on the day.
Below is the coding I have that Excel is not liking.
Sub FilterAccurateRawData()
'
' FilterAccurateRawData Macro
'
'
Rows("1:1").Select
Selection.AutoFilter
ActiveSheet.Range("$A$1:$AA$45415").AutoFilter Field:=1, Criteria1:=Array("<>AR", "<>BATCH", "<>Total:*")
Operator:=xlFilterValues
Sheets("Instructions").Select
Range("A9").Select
End Sub
I have 2 worksheets, and I was wondering if I can have a cell from Sheet2 equal to the subtotal of the Autofilter criteria of a column in Sheet1.
I do have something working with macros but it takes a long time. This would make things a lot easier.
I am creating my first Userform and having some problems. I take the data supplied by the userform and try to match it as closely as possible to a row of information. Currently I am using four cells to autofilter my spreadsheet data. Two of the cells I am looking for a exact match. The other two cells I am looking for the number that has been input or anything greater than it. Here is the code I have come up with...
View 9 Replies View RelatedI am trying to make an "intelligent" auto filter that with filter with increasing restriction until a certain criteria is met.
The list runs from A5:G20. In coloumn G is the number of hours associated with each event. And in A1 I have the percentage of items showing/whole list so it I have 15 rows on the list, and I filter so that only 5 are showing, cell a1=33%
How can I make a macro that will autofilter until the the a1=5%
Like having filter criter = equal or greater then 1 hour,
if a1 > 5%
Then criteria + 1 hour
If A1=<5%, then stop.
basically a seed criteria of 1 hour, adding 1 hour until the value in a1 = 5%
I am not sure if I am using the correct terminology when I see "array". What I want to do in VBA is what I know how to do in non-vba excel functions (cntrl + shift + enter). For example, I have a range of cells that need to meet one condition ( ""):
Code:
If Sheet8.Range("C" & rw) "" Or Sheet8.Range("D" & rw) "" Or Sheet8.Range("E" & rw) ""...etc Then
How do I bundle this in one package. What you see below is obviously incorrect, but I am trying to accomplish this with proper syntax.
Code:
If Or(Sheet8.Range("C" & rw & ":Z" & rw) "")
how to set all values in an array to be the same value. Currently I am using code in a For/Next loop like the following to do this:
Sub testing()
Dim ArrayToAllHaveSameValues(1 To 30) As String, i As Integer
For i = 1 To 30
ArrayToAllHaveSameValues(i) = "Value"
Next i
End Sub
Is there a way to set an array equal to part of another 2D array. If say I have an array with 5 columns. Is there a way to break that up in to two arrays one with 3 and one with 2. Even getting it to 5 1D arrays would work. I bring it in as 1 array but I need the information in different places. This is actually only the output. So if there is a way to send only part of the array out that would work to. I know you set the range smaller than array with range=array, but that still doesn't get me where I need to be. This is obviously without simply going through a loop. I could set it to 5 singles with a single nested loop I know. I was looking for a non-loop way.
View 5 Replies View RelatedI'm trying to do a SUM array to count the number of instances where Column C AND Column D are equal to 0, but are NOT BLANK.
I tried the formula:
=SUM((C:C="0")*(D:D="0"))
But the answer comes up 0. However, if I use the formula:
=SUM((C:C=0)*(D:D=0))
The answer includes blank cells (as I assumed it would).
How do I get a SUM array to count only numerical zeros?
PS: If there's a much easier way to do this, I welcome those comments as well, though if it can be done in SUM array I'd love that answer as well.
How can you test that no single element of an array is equal to a particular value?
I'm trying to set an array of types equal to a set of cells in excel, first I've defined an ORoom with attributes such as ( ORID, ORName,...), then ORooms whish is a set of ORs, from OR1 to OR 30.
Now I want to put ORooms equal to the whole range for them containing all information for all ORs, I'm trying this code:
Public Type ORoom
ORID As Integer
ORName As String
Cases As Integer
[Code] ........
But it gives me the error Invalid outside Procedure, referring to "A2:A31", I've checked but that the correct range for it.
When I run the following code, it just returns records that matches "Commonwealth" and not a single record with "State". What am I doing wrong?
What I want is that I have a table like below (but it's long for 52 weeks) and long down with Vlookups. I want the formula with which I can just do the copy-paste and it will work. W1, W2.... are the sheet names with exactly the same formats inside.
A
B
C
D
E
5
W1
W2
W3
W4
6
Sales
10
#N/D!
[Code] .......
The base formula (for W1) is:
=Vlookup($a6;'W1'!$A:$B;2;0)
What I want, is the formula which instead of "W1" will write the sheet name which is in a row 5 (basically - cell name which is equal the sheet name), so with just dragging and moving the formula I will got the data from different sheets.
I tried this: =Vlookup(A6;'indirect("c5";1)'!$A:$B;2;0)
But I got #N/D! as in the example, instead of the numbers (yes, I put numbers into W1 and W2 sheets .
I am trying to filter an array (the longer one) using the shorter array as the criteria. I am currently doing this using the following method
IF(LOOKUP(lookup cell, array)=lookupcell, lookupcell, "FALSE")
I then copy and paste 'values' and filter out the 'false' to get my final result.
This has worked in the past, but for some reason that I simply can't figure out, the formula isnt working! I've attached the example, and I've highlighted a number in blue (cell E522 and C103), (that should be being found in the 'LOOKUP' function) but is returning a "FALSE". I have looked over the code and simply can't figure out why Excel isn't returning the right value.
This is obviously happening for a quite a few of my numbers, as my filter result is returning an array that is about 1500 shorter than it should be. I have highlighted E522 as the 'example cell' to look at.
I'd like to ask if there is anyway to use an advanced criteria with a NOT EQUAL operator.
I have a list that contains about 50 different data values that I want to filter but I want to restrict the list to not contain four different data items. Clearly, autofilter did not work as I can only specify two conditions in the custom filter. I want to use advanced filter instead but this only tests for equality.
I have data that is formatted in an Excel 2010 table. The two columns in question are [Invoice #] and [Description]. In the description column I have descriptions of products as well as freight. The same invoice number would be tied to the product description as well as its associated freight. I need to filter out certain product types and their associated freight items.
The macro I wrote creates an array of invoice numbers that I want to filter out and leave the remaining invoices, but I can't get the filtering part to work. Here is my code:
Dim Invoices() As Variant 'array of invoice numbers
Dim Descriptions() As Variant 'array of Descriptions
Dim InvoiceFilter() As Variant 'array of invoice numbers to filter
Dim i As Integer 'counter
Dim j As Integer
j = 1
[Code]...
What happens now is that it filters out all values in the Invoice column instead of only the values in the InvoiceFilter array.
I am trying to do a sumifs with several criteria, and I want one of those criteria to be when the date in Column C (Date Contains Day Month Year) is in 2014. So that it only summs the lines from 2014. Not sure how to specify my Criteria Range to do this.
View 3 Replies View RelatedThe invoice itself simply equals cells from a drop down in the columns to the right hand side. (highlight yellow) What im looking to do is if any of the cells in column I equals - - i would like the cells b16:f16 to hide within the same row from the invoice and if there is something in column I that isn't - - i would like them to reappear.
View 6 Replies View RelatedSay you have a long list of data, and you go to Data menu --> Filter --> AutoFilter
And then you want to use the Custom AutoFilter. Here's a screenshot:
[url]
Is there any way to do MORE than two autofilters?
Been looking at various options. Just want something to simply show the autofilter critera (1 & 2 or how every many there are) in a text box. The range being filtered is column A : M.
Basically taking this further, want to use the criteria of column C to lookup an email address e.g.
'C' is filtered by "Company 96"
Lookup "Company 96" from sheet2 range A:B, with column A containing name, and column B containing email address
I have a table with 3 columns with an unkown number of rows (text, date, date) that is being imported daily.
I want to create a 4th column with dates starting from today and each subsequent row be one day earlier. I want to look at 30 previous days.
I then want to count the number of rows (looking at column 1-3) with the following criteria:
Countif column2<= "date in colum4" AND column3< "date in column4"
My problem is following: I have a list of data that are classified according to a particular character, and I want to copy (with auto filter through the macro) the relevant information to the appropriate place in the sheet where it belongs. That's no problem. The problem is that if I want to copy data, classified by a character that is not listed in the table (that is not in the filtering criteria), then all the data are copied to the appropriate place. But I do not want to copy in this case nothing. How should such a macro look like?
Find attached an example : example.xlsm
This is the following code i have a problem with:
ActiveSheet.Range("$B:$J").AutoFilter Field:=1, Criteria1:=Sheets("Report").Cell(0, -2).Value
I am trying to filter items on a sheet called "all the answers" and i want to look up a value on the sheet called "Report" to filter.
The cell i want to filter is two cells to the left of the active cell on that sheet.
I have some data which I want to apply multiple criteria to for a particular column. Searched around on the internet and it would appear I should use an array and pass that to my criteria. What I can't find an answer for is how to say "does not equal any of the values within the array"
Code currently is:
Code:
Dim NumberFilter_Array(0 to 2)
NumberFilter_Array(0) = 2
NumberFilter_Array(1) = 9
[Code].....
I've tried variations for that in red but can't get it to work, how to correct the line in red to filter for none of the values in the array NumberFilter_Array?
I am trying to use VBA to set an autofilter that hides all zeros in Column AL and then excludes all values in Column E that start with "312" or "502". For some reason I can't get this to work as expected, it still continues to display unwanted values in Column E.
HTML Code:
ActiveSheet.Range("$A$1:$CS" & LastRow).AutoFilter Field:=5, Criteria1:=Array("312*", "502*")
ActiveSheet.Range("$A$1:$CS" & LastRow).AutoFilter Field:=38, Criteria1:=Array("0")
Is there a way to add a dynamic number of criteria(based on user input) to an autofilter.
Code:
ActiveSheet.Cells(1, 1).AutoFilter Field:=1, Criteria1:= dynamicfilters
I have one master sheet of data, with a large number of fields and data.
I need to turn this master data into individual records, each record exisiting as an individual worksheet - lets call it a 'U'. The U is a template sheet which has calculations and lookups built into it to complete further information. The completed U's are then used by a number of people for different reasons. There are 3 main 'flavours' of these sheets which have slightly different uses.
I've gone from knowing nothing about macros to having learned enough about them in the last week or so to populate each individual sheet with the data, and save the new file in the location I want it to go.
What I want to do now is filter the fields displayed by the individual U sheets, as not every field is applicable to each 'flavour'. I've marked up the rows as to the appropriate flavour - e.g. Row 17 is applicable to 'P' 'F' and 'R' ( Cell which is auto filtered contains PFR), but Row 18 is only 'P' and 'F' (Cell contains PF).
I've gone through the master file and identified each entry as a the appropriate flavour - to summarise what I'd like to do now:
1) Automatically populate the template file with the relevant data. (which my macro will do)
2) Use an autofilter to filter the rows equal to the data in the reference sheet so these are the only ones displayed. Eg. Reference sheet says 'P', so I want to filter the U sheet where autofilter column contains the letter 'P'
3) Rename the file and save as my reference in the location I want it to (which the macro is doing).
Here's what I've got:
Range("CF3").Select
Selection.Copy
Windows("USS iss1.xls").Activate
Range("G158").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Selection.AutoFilter Field:=1, Criteria1:=ActiveCell, Operator:=xlAnd
(where CF3 = the cell in the master data with the flavour in it, "USS iss1" is the template U file, G158 is a spare cell and Autofilter Field 1 contains the row reference which tells me which data applies to which flavours).
I've tried using the macro recorder, which when I paste the value in the autofilter/contains box records it as the value I've just put in rather than a copy of the reference cell. I've tried
Criteria1:=*ActiveCell*
and other variations on the same theme, but to no avail - I get "Compile error: Expected:expression".
