how to set all values in an array to be the same value. Currently I am using code in a For/Next loop like the following to do this:
Sub testing()
Dim ArrayToAllHaveSameValues(1 To 30) As String, i As Integer
For i = 1 To 30
ArrayToAllHaveSameValues(i) = "Value"
Next i
End Sub
I'm having trouble with a small vba macro. At the end of the macro I test to see if two variables are equal and then print out true or false. However, for some reason even though the variables are equal vba is not treating them that way. I have put the values that represent the variables on a spreadsheet and used the if(x1=x2) formula and it says it is true, also, when I debug the macro and watch the values when it comes to test the logical expression the numbers are the same. I don't understand why vba does not say that the two variables are equal. I have attached a screenshot of the breakpoint where I double check the values are equal.
View 2 Replies View RelatedI am not sure if I am using the correct terminology when I see "array". What I want to do in VBA is what I know how to do in non-vba excel functions (cntrl + shift + enter). For example, I have a range of cells that need to meet one condition ( ""):
Code:
If Sheet8.Range("C" & rw) "" Or Sheet8.Range("D" & rw) "" Or Sheet8.Range("E" & rw) ""...etc Then
How do I bundle this in one package. What you see below is obviously incorrect, but I am trying to accomplish this with proper syntax.
Code:
If Or(Sheet8.Range("C" & rw & ":Z" & rw) "")
Is there a way to set an array equal to part of another 2D array. If say I have an array with 5 columns. Is there a way to break that up in to two arrays one with 3 and one with 2. Even getting it to 5 1D arrays would work. I bring it in as 1 array but I need the information in different places. This is actually only the output. So if there is a way to send only part of the array out that would work to. I know you set the range smaller than array with range=array, but that still doesn't get me where I need to be. This is obviously without simply going through a loop. I could set it to 5 singles with a single nested loop I know. I was looking for a non-loop way.
View 5 Replies View RelatedI'm trying to do a SUM array to count the number of instances where Column C AND Column D are equal to 0, but are NOT BLANK.
I tried the formula:
=SUM((C:C="0")*(D:D="0"))
But the answer comes up 0. However, if I use the formula:
=SUM((C:C=0)*(D:D=0))
The answer includes blank cells (as I assumed it would).
How do I get a SUM array to count only numerical zeros?
PS: If there's a much easier way to do this, I welcome those comments as well, though if it can be done in SUM array I'd love that answer as well.
Filter below:
Code:
Sheets("Sheet1").Range("$A$3:$AO$64999").AutoFilter Field:=1,
Criteria1:=Array("0" _, "1", "2", "3", ""), Operator:=xlFilterValues
Now I would like to change to exclude these values, tried some tricks, like:
Criteria1:=Array("0" _, "1", "2", "3", ""), Operator:=xlFilterValues
but not working.
How can you test that no single element of an array is equal to a particular value?
Code:
Selection.AutoFilter Field:=5, Criteria1:=Array("CHF", "DKK", "EUR", "GBP", "NOK", "SEK", "USD")
I am trying to use VBA to filter a list for not equal to. See line above. I want to filter a table I have for unknown Currencies basically.
I'm trying to set an array of types equal to a set of cells in excel, first I've defined an ORoom with attributes such as ( ORID, ORName,...), then ORooms whish is a set of ORs, from OR1 to OR 30.
Now I want to put ORooms equal to the whole range for them containing all information for all ORs, I'm trying this code:
Public Type ORoom
ORID As Integer
ORName As String
Cases As Integer
[Code] ........
But it gives me the error Invalid outside Procedure, referring to "A2:A31", I've checked but that the correct range for it.
What I want is that I have a table like below (but it's long for 52 weeks) and long down with Vlookups. I want the formula with which I can just do the copy-paste and it will work. W1, W2.... are the sheet names with exactly the same formats inside.
A
B
C
D
E
5
W1
W2
W3
W4
6
Sales
10
#N/D!
[Code] .......
The base formula (for W1) is:
=Vlookup($a6;'W1'!$A:$B;2;0)
What I want, is the formula which instead of "W1" will write the sheet name which is in a row 5 (basically - cell name which is equal the sheet name), so with just dragging and moving the formula I will got the data from different sheets.
I tried this: =Vlookup(A6;'indirect("c5";1)'!$A:$B;2;0)
But I got #N/D! as in the example, instead of the numbers (yes, I put numbers into W1 and W2 sheets .
One aspect of my Excel-based project involves comparing the operator-entered part number (in Excel) to a predetermined list of part numbers in one column of an Access database table. Right now, my program is telling me that every part number entered in the spreadsheet (50+) does not match any part number in the database, which I've verified to be incorrect. I've checked that both the spreadsheet part number and the database part number are of the string datatype.
To the best of my knowledge, my looping logic seems valid and robust. To the best of my knowledge, there are no hidden characters in either the database cells or in the spreadsheet cells causing this apparent mismatch. I'm completely stumped at this point as to why my program doesn't detect any matches between the spreadsheet and the database table. Below is the Sub containing the code for checking that the part numbers match:
[Code] ....
This issue seems to be a hybrid issue between Excel and Access with (to me) more of the issue on the Access end.
Trying to find the sum of all cells in the array described in the formula that are equal to the values inside the quotations. I used this exact (as far as I can tell) formula to find the sum of values that were NOT equal to my quoted values and it worked just fine. Any ideas why formula 'A' will not work but formula 'B' does work? I have a feeling I'm missing something simple here!
Formula A - Does not work:
=SUMPRODUCT(--('Master Lead Sheet'!$J$2:$J$10000=$B2),--('Master Lead Sheet'!$N$2:$N$10000="REJECTED"),--('Master Lead Sheet'!$N$2:$N$10000="CONDITIONED"),--('Master Lead Sheet'!$N$2:$N$10000="APPROVED"))
Formla B - Works:
=SUMPRODUCT(--('Master Lead Sheet'!$J$2:$J$10000=$B2),--('Master Lead Sheet'!$N$2:$N$10000"No Answer"),--('Master Lead Sheet'!$N$2:$N$10000"Disconnected"),--('Master Lead Sheet'!$N$2:$N$10000"Wrong Number"),--('Master Lead Sheet'!$N$2:$N$10000"EMAILED"),--('Master Lead Sheet'!$N$2:$N$10000"needs to be emailed"),--('Master Lead Sheet'!$N$2:$N$10000"Refund"),--('Master Lead Sheet'!$N$2:$N$10000"REFUNDED"))
I've created the following function that chooses the maximum value from a set of cells then inserts theappropriate row number (within a table) into a new cell.
=IF(J27=0,"?",IF(J27=J19,1,IF(J27=J20,2,IF(J27=J21,3,IF(J27=J22,4,IF(J27=J23,5,IF(J27=J24,6,IF(J27=J 25,7,IF(J27=J26,8)))))))))
It's working fine until I have 2 cells with the highest value. The above statement is entering the first cell that meets the criteria in the new cell but ignores the fact there maybe 2 (or more) of the same value.
How can I get both (or all) to be entered in the same cell? Is there a better way, maybe highlighting all the rows in the table that equal the max figure?
I have a class module with several private variables, including one that is an array of a user-defined type. I am trying to set the values of a single element of this array with "Property Let ..." from a string array:
View 4 Replies View RelatedI have a spreadsheet that has a number of values and a separate sheet that has a paid total. What would be the easiest way to find the values in sheet 1 that total the sum in sheet 2? There may be more than one possible solution as to the items that total the sum.
View 1 Replies View RelatedI'm trying to sum all values greater than 5,000,00 and less than or equal to 10,000,000. I have this formula:
Code:
=SUMIFS(B6:B1359,B6:B1359,">"&L2,B6:B1359,"=
am currently setting up a fantasy football league.
i have set up the league, with team name overall points and position, my problem is that when 2 teams have the same points one team is omitted and the other team has its name on both entries
the formula's i am using are
vlookup = to find the name of team for the points
large = to find out points of each team
I have a table full of phone numbers and call durations.
In A2:A6160, I have 162 different phone numbers and in U2:U6160, I have the call durations for calls made to those numbers.
In a separate spreadsheet, I have each number listed in Column A and in Column D, I want to display the average call duration for each of the numbers.
How can I count the number of cells in a range that contain values that are greater than or equal to zero?
View 2 Replies View RelatedI have a workbook with 2 sheets - [Names] has with a list of Staff Ids column B, [Access] has a list of their system acces - with their staff ids in column A and access in F (There could be more than 1 type of access),
I am looking to create a code that :
For each ID in [Names] B lookup in [Access] A
if found create a string with value in F ( so I have a list of all access )
And paste into F in [Names]
I have tried all sorts of things and just can't get it working.
Is it possible to separate a range of cells with numerical values into "n" groups that have equal (or as close to equal as possible) total sums?
Ex. The range A1:A30 includes 30 random numbers between 1 and 12 (obviously there are duplicates). I need excel to auto-generate 6 groups of 5 cells each with each group having the same (again, as close as possible) total sum. Preferably, I'd like the numbers in each group to be similar from top to bottom, but I'm not overly concerned about that.
I need to group all records where the values in column A are equal. BUT I needed them sorted by another column (the whole sheet, not just within each group). Currently, all of the values in column A are listed in random order. Is there any way to do this manually?
to elaborate a bit further, consider the following:
Columns: A-B-C-etc.
1-Z...
1-X...
4-X
3-Y
4-Y
2-Z
Basically, I need to group all of the "1"'s and all of the "4"'s so that the extra values will show underneath the other. HOWEVER, I need them to be sorted such that the order in which they appear are XYZ. So the goal would be:
1-X
1-Z
4-X
4-Y
3-Y
2-Z
I have cells that they're values should be equal B6=B11, B7=B12, B8=B13, E6=B14, E7=B15, E8=B16, I want a macro that if the values are not equal then the background should be RED and a pop up message "The values should be equal".
View 9 Replies View Relatedhow to apply this code to include specifically these ranges in pairs: H50 & H51, H102 & H103, H154 & H155, and H206 & H207.
'tried to cut and paste the code from Private Sub to End Sub changing only
the Ranges (see above), but it didn't work.
Say I have Column A populated with Employee Names, and Column B populated with "Pass" or "Fail" (which indicates a passed or failed customer service call monitoring).
For each employee, I want to be able to look at all of their overall scores (usually between 3 and 10 evaluations per month) and easily highlight people who have failed 2 out of 3 consecutive evaluations.
I want to integrate this feature in to a weekly quality report.
I have a spreadsheeet with values in columns F:K from row 10 onwards
I need VBA code that will delete the rows where there are values opposite and equal in columns F:K from row 10 owards for eg if F10 is 10000 and K10 is -10000, F 25 is 150000 and G25 is -10000, G29 is -175000 and H29 is 175000, then rowa 10,25 & 29 must be deleted
I need to distribute a list of data into 10 even groups of data. Here is the scenario.
I have 10 salespeople on my team with a list of accounts that need to be evenly distributed based on two criteria
- Each sales person needs to have the same number of zipcodes , with the closest TOTAL # of accounts and TOTAL $ value as possible
Need a Macro to delete all rows containing values less than or equal 300 in column A
View 5 Replies View RelatedQuestion contained within code:
Code:
Dim MyArray(6, 1) As String
Dim i As Integer
'' Array List 1
[Code]....
'If lbxLI = any list index from Array List 1 then use the value stored in Array List 2 to give Listbox 2 its rowsource.
'For example; ListIndex "0" would produce a row source "_0" for listbox 2. Else if ListIndex "1" is selected, produce row source "_1" for listbox 2.
' I would like to achieve this from one "If" statement. I'm guessing it must be possible using a loop, I just can't think how despite a lot of messing about with code.
(Excel 2007) The issue I'm having is that a loop statement of mine is failing to recognize that a couple values are equal. It works for the first 3 iterations of the loop, then stops recognizing. I tried copying another set of numbers in the failing one's place, and that actually worked. I can't attach anything, so I'm including a link to a detailed screen shot with some notes on it and code that I'll host on my site. Not sure how else to explain the issue, but if you take a look at the screen shot you can see the excel sheet being worked on and the vba code running. I will also include a text file of the code
Here are the links to the screen shot and text file of my code
Text file
Screen Shot