Set Array Equal To Part Of Another
May 17, 2007
Is there a way to set an array equal to part of another 2D array. If say I have an array with 5 columns. Is there a way to break that up in to two arrays one with 3 and one with 2. Even getting it to 5 1D arrays would work. I bring it in as 1 array but I need the information in different places. This is actually only the output. So if there is a way to send only part of the array out that would work to. I know you set the range smaller than array with range=array, but that still doesn't get me where I need to be. This is obviously without simply going through a loop. I could set it to 5 singles with a single nested loop I know. I was looking for a non-loop way.
View 5 Replies
ADVERTISEMENT
Mar 23, 2012
I am not sure if I am using the correct terminology when I see "array". What I want to do in VBA is what I know how to do in non-vba excel functions (cntrl + shift + enter). For example, I have a range of cells that need to meet one condition ( ""):
Code:
If Sheet8.Range("C" & rw) "" Or Sheet8.Range("D" & rw) "" Or Sheet8.Range("E" & rw) ""...etc Then
How do I bundle this in one package. What you see below is obviously incorrect, but I am trying to accomplish this with proper syntax.
Code:
If Or(Sheet8.Range("C" & rw & ":Z" & rw) "")
View 9 Replies
View Related
Aug 23, 2008
how to set all values in an array to be the same value. Currently I am using code in a For/Next loop like the following to do this:
Sub testing()
Dim ArrayToAllHaveSameValues(1 To 30) As String, i As Integer
For i = 1 To 30
ArrayToAllHaveSameValues(i) = "Value"
Next i
End Sub
View 7 Replies
View Related
Aug 25, 2006
I am trying to copy or edit a cell thats has the following formula (see below), I keep getting this message "You cannot change part of an Array!"
=If(ROW($A2:$A8)-ROW(A2)+1>COUNT(W2:W8),"",INDEX($A:$A,SMALL(W2:W8,ROW(INDIRECT("1:"&ROWS(A2:A8))))))
View 5 Replies
View Related
Apr 17, 2012
I'm trying to do a SUM array to count the number of instances where Column C AND Column D are equal to 0, but are NOT BLANK.
I tried the formula:
=SUM((C:C="0")*(D:D="0"))
But the answer comes up 0. However, if I use the formula:
=SUM((C:C=0)*(D:D=0))
The answer includes blank cells (as I assumed it would).
How do I get a SUM array to count only numerical zeros?
PS: If there's a much easier way to do this, I welcome those comments as well, though if it can be done in SUM array I'd love that answer as well.
View 4 Replies
View Related
May 23, 2013
Filter below:
Code:
Sheets("Sheet1").Range("$A$3:$AO$64999").AutoFilter Field:=1,
Criteria1:=Array("0" _, "1", "2", "3", ""), Operator:=xlFilterValues
Now I would like to change to exclude these values, tried some tricks, like:
Criteria1:=Array("0" _, "1", "2", "3", ""), Operator:=xlFilterValues
but not working.
View 2 Replies
View Related
Jun 20, 2008
How can you test that no single element of an array is equal to a particular value?
View 9 Replies
View Related
Mar 21, 2013
Code:
Selection.AutoFilter Field:=5, Criteria1:=Array("CHF", "DKK", "EUR", "GBP", "NOK", "SEK", "USD")
I am trying to use VBA to filter a list for not equal to. See line above. I want to filter a table I have for unknown Currencies basically.
View 1 Replies
View Related
Apr 9, 2014
I'm trying to set an array of types equal to a set of cells in excel, first I've defined an ORoom with attributes such as ( ORID, ORName,...), then ORooms whish is a set of ORs, from OR1 to OR 30.
Now I want to put ORooms equal to the whole range for them containing all information for all ORs, I'm trying this code:
Public Type ORoom
ORID As Integer
ORName As String
Cases As Integer
[Code] ........
But it gives me the error Invalid outside Procedure, referring to "A2:A31", I've checked but that the correct range for it.
View 4 Replies
View Related
Dec 18, 2006
How to change part of an array value?.If i try to change array value "Microsoft Excel" popups a dialog stating "You cannot change part of an array."
Somebody have mention to use "Ctrl+Shift+Enter" but this will change entire array value.So I need a change only a specific cell value.
View 4 Replies
View Related
Jan 17, 2014
What I want is that I have a table like below (but it's long for 52 weeks) and long down with Vlookups. I want the formula with which I can just do the copy-paste and it will work. W1, W2.... are the sheet names with exactly the same formats inside.
A
B
C
D
E
5
W1
W2
W3
W4
6
Sales
10
#N/D!
[Code] .......
The base formula (for W1) is:
=Vlookup($a6;'W1'!$A:$B;2;0)
What I want, is the formula which instead of "W1" will write the sheet name which is in a row 5 (basically - cell name which is equal the sheet name), so with just dragging and moving the formula I will got the data from different sheets.
I tried this: =Vlookup(A6;'indirect("c5";1)'!$A:$B;2;0)
But I got #N/D! as in the example, instead of the numbers (yes, I put numbers into W1 and W2 sheets .
View 4 Replies
View Related
Sep 21, 2007
I have a multicolumn listbox, and a multidimensional array.
I want to put just SOME values of the array into the listbox, but I ger errors using both .list or .column to access single items, and even using .additem .
I have:
dim variable(2000,2) as string
variable(1,0)="aaa": variable(1,1)="bbb": variable(1,2)="ccc"
variable(2,0)="www": variable(2,1)="awasd": variable(1,2)="asdfa"
....
variable(2000,0)="www": variable(2000,1)="awasd": variable(2000,2)="asdfa"
I don't want to store all 2000 elements, just some ones: how can I do it?
View 9 Replies
View Related
Jun 3, 2013
I have a macro that works but was wondering if there is an easier way to shorten up the part of the code that is very repetitive with an array or ? Nothing I have tried works except the code below.
Code:
Sub ClearAndReset()
Dim WS1 As Worksheet
Set WS1 = ActiveWorkbook.Worksheets("Stocks")
WS1.Unprotect
Application.EnableEvents = False
With WS1
[code]....
View 3 Replies
View Related
Aug 18, 2009
I have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.
So the basic vlookup is as follows:
=VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0)
but the data I am looking for wont always be in the range M60:P73.
So I tried to make it dynamic by doing the following:
=VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE)
The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73
This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.
View 3 Replies
View Related
Feb 12, 2009
I'm creating a worksheet that gives a list of part numbers based on the product part code. In most cases I can use the following.
=LOOKUP(O6,{0,1,2,3,4},{"NONE (M25)","SMP-55-001","SMP-55-004","SMP-55-008","SMP-55-014"})
so this gives a part number depending on what number is placed in O6. What I need to do know is look at 2 different cells and for each combination of numbers give a different part number. so if A1 is 2 and B1 is 3 give a certain result.
View 3 Replies
View Related
Jul 5, 2007
I'm having trouble with a small vba macro. At the end of the macro I test to see if two variables are equal and then print out true or false. However, for some reason even though the variables are equal vba is not treating them that way. I have put the values that represent the variables on a spreadsheet and used the if(x1=x2) formula and it says it is true, also, when I debug the macro and watch the values when it comes to test the logical expression the numbers are the same. I don't understand why vba does not say that the two variables are equal. I have attached a screenshot of the breakpoint where I double check the values are equal.
View 2 Replies
View Related
Feb 21, 2009
Assuming 1st row is a header row
Sheet1, Column A
1230000_XL07 - WB OPS
1230001_XL08 - WB OPS
1230002_XL09 - WB OPS
Sheet 2, Column A
1230000
How do I lookup 1230000 and return 1230000_XL -07 WB OPS in B2
View 2 Replies
View Related
Nov 18, 2008
Using the below formula. I know that I should get the result of 32 if I am dong this correctly (182 matches part 1 of which 32 match in part 2).
=SUMPRODUCT(--($A$1='7. PM BDE'! $J$3:$J$366))*(--('7. PM BDE'!$L$3:$L$366=1))
View 3 Replies
View Related
Feb 12, 2014
Is there any way to remove the first part of a string of text in a cell and save the second part?
The first part of the text string is a team code that has a variable number of numbers, capital letters and sometimes spaces. The second part of the text string is a variable number of words in a team name that all start with a capital letter and have lower case letters. Every line has a different team code and team name.
The original spreadsheet also has a column with just team code. Is there a way of using this column to "subtract" the team code from the text string to just leave the team name?
View 5 Replies
View Related
Dec 10, 2008
I have a spreadsheet with 2 worksheets. On the first "active parts" I have a list of active part numbers and on the second "All Parts" I have all of the parts available.
I want to compare every part in the All Parts worksheet to see if the part number exists on the Active Parts sheet - if it's there, I would like it to return the value "Active" in column B in All Parts. I have a formula in column B in All Parts that seems to work for the first few, but as soon as it finds one that is active, the rest of the cells below all return "Active".
View 3 Replies
View Related
Aug 4, 2007
I have 2 basic parts to a Macro which need to be separated by a pause of 1 second, before proceeding to the next part of the macro. Then pause for 1 second, and loop.
Application.Wait is no good to me as the spreadsheet must remain live, editable, and receiving updates from an external program linked via DDE. Below is the ...
View 6 Replies
View Related
Apr 17, 2014
How to correct my formula because it does not work?
Here the formula: =COUNTIFS(Data!C2:C24005,A17,Data!M2:M11149,"<=0")
I need to insert the formula in column C (Findings tab) which counts the rows in Column M (tab named "Data") that equal A17 (Column A in "Findings" tab) and which are less or equal zero. In addition if I drag the formula down I want to only the values be entered in highlighted in blue cells in column C (SKUs With Zero Sales in "Findings" tab) and empty cells in not highlighted cells. I attached images of these two tabs: Data and Findings.
View 5 Replies
View Related
Mar 9, 2013
I have an excel file having part code,name,vendor and Qty ( Quantity ).
My problem is that I want to apply an excel formula to pick up that vendor code who have highest Qty of a part code.The condition is that S.No.should not be disturbed.This file is so large,but here I have taken an example,
View 2 Replies
View Related
Feb 10, 2009
What I am trying to do is automatically move the date received and the total qty received from the Rcvg. Log sheet to the RFMs Release sheet.
The problem is:
1) I don't know what I'm doing
2) On the Rcvg. Log several part numbers that are the same with different Qtys.
3) on the Rcvg. Log the are several part numbers that are the same using different programs.
What I would like to do is combine all the same part numbers with the same program add the total Qty received and paste the date received and total Qty into the RFMs Release sheet in the proper part numbers row.
Is this possible?
Attached is a shortened copy of the spreadsheet normally there about 3000 entries.
View 9 Replies
View Related
Jun 29, 2008
I'm trying to count if there are situations where column a is equal to a specific number and column b is equal to another number.
both columns are numbers. Does anybody have a good idea how to do this, maybe countif, but i am not sure how to do more than one item with that.
View 9 Replies
View Related
Jul 30, 2012
in C a string is nothing more than an Array of characters ending with a null character.
in VBA this does not seem to be the case.I am trying to use the BlowFish code from David Midkiff for some encryption, however the code sometimes fails:
When encrypting a string a string of a specific length should be returned. however sometimes one of the characters of the encrypted string is a null character, and the returned encrypted string (with a embedded null character) is causing me problems. I want to check for the null character and if present redo the encryption. But how do I check for the presence of this null character in a unicode (double-byte) string?
Checking with Len(encrypted) gives the correct length (!) but trying to move each (unicode)character into an array fails when using the Mid() function past the null character in the string.
Now I can use
byteArray() = StrConv(unicodetext,vbFromUnicode)
to get the lower byte of each character into an array easily, but how do I do this for both bytes of the unicode characters?
Using an integer array does not work other than through
intArray(j) = CInt(AscW(Mid(Outp, j, 1)))
which fails on the nullstring in my encrypted text.
I have tried with variants but so far no luck. I thought if the string was entered into a variant then I could also address the variant as an array of bytes, but that does not seem to be accepted by VBA.
View 1 Replies
View Related
Sep 9, 2012
I am trying to populate many arrays with the same code using something like this. For this test, assume the following data in A1.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Code:
Sub populate()
Dim firstArr(5), secondArr(5), thirdArr(5), fourthArr(5), fifthArr(5) As Integer
Dim r, c, num As Integer
[Code]....
The above code does not work of course and falls over. I am unsure whether I should try and concatenate with something like this eg "" & arrName(i) = Cells (r,c) or go down a different route.
View 6 Replies
View Related
Dec 20, 2013
I need to export this to Xcelsius which doesn't support any macros/vba. Btw I can;'t use Row() in xcelsius too.
[Code].....
View 4 Replies
View Related
Oct 2, 2008
I have a class module with several private variables, including one that is an array of a user-defined type. I am trying to set the values of a single element of this array with "Property Let ..." from a string array:
View 4 Replies
View Related
Apr 7, 2009
Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.
Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?
Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.
And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.
I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
View 6 Replies
View Related