I am creating my first Userform and having some problems. I take the data supplied by the userform and try to match it as closely as possible to a row of information. Currently I am using four cells to autofilter my spreadsheet data. Two of the cells I am looking for a exact match. The other two cells I am looking for the number that has been input or anything greater than it. Here is the code I have come up with...
View 9 Replies
I have a cell, M87. The score in M87 can be less than 13 or greater than 25. I need a formula within M94 which refers to M87, and outputs depending on the the following criteria. If M87 is less than 13 then output as D. If M87 is 14, 15, 16, or 17 then output as C. If M87 is 18, 19, 20, 21, 22, 23 or 24 then output as B. If M87 is greater than 24 then output as A.
View 3 Replies View RelatedIf A7 is equal to and greater than 95% than B7 is equal to "A". If A7 is equal to 91% but less than 94.99% than B7 is equal to "B"...
View 4 Replies View RelatedI'm trying to sum all values greater than 5,000,00 and less than or equal to 10,000,000. I have this formula:
Code:
=SUMIFS(B6:B1359,B6:B1359,">"&L2,B6:B1359,"=
I am looking for a function like MATCH if the match type were set to -1. However my data is sorted in ascending order. I am mining data from a Pivot Table, and it has dates across the top. Of course the pivot table will have the data sorted in ascending order from left to right. I want to find the first date that is greater than today. With weekends and holidays I can't just use TODAY()+1. Is there a function that can do what I am asking? Also I do not want to change the pivot table itself.
View 9 Replies View RelatedI need a formula that looks at the total in H40 and if the number is between 32 and 40 I need it to return the number then if the number exceds forty I need to multiply the overage by 1.5 and add it to the 8 for a total of 11.
I think it would be something like:
SUMIf(H40>"32",
How can I count the number of cells in a range that contain values that are greater than or equal to zero?
View 2 Replies View Relatedi'm trying to create a markscheme progress sheet.
You take a childs actual age in months and years (ie 9.8 for 9years and 8months). They then, in theory, should be at that age level for reading and spelling.
I have the age in B4, the reading in C4 and the spelling in D4. If i use CF to say i want C4 to be red if it's less than B4, Amber if it's the same and green if it's over, as soon as i okay it, C4 goes amber, because it's equal to B4, which is blank. I can get the colours to work, i just can't figure out what to put to turn the amber off when cell B4 is empty.
I've tried as many combinations as my little amount of excel knowledge can cope with.
I have start date(Column A) and an end date(Column B) in two columns and I have found out the difference between them in column C in hh:mm:ss format. I want to find out how many cases are greater than 2 Hrs but less than or equal to 4 Hrs.
View 9 Replies View Relatedi have table of values if any value in the coulomb G and I greater than or equal to 1 the entire row must be deleted how can i do this ?
View 4 Replies View RelatedStarting in cell F3, if Column F is greater than or equal to zero, delete the entire row and continue deleting rows until Column A has contents in it. Then go to Column F in that same row that had contents in Column A, if the contents in that row of Column F are greater than or equal to zero, delete the entire row and continue deleting rows until Column A has contents in it. Persist with this pattern until every row in Column F has been checked.
View 4 Replies View RelatedNeed a formula for counting how many consecutive cells where the value is gretaer than or equal to +1
For example 1,
J18 = 7
K18 = 9
L18 = 3
M18 = 2
N18 = 8
O18 = 1
P18 = 8
Q18 = -17
In the above example the result would be 7
Example 2:
J12 = -22
K12 = 9
L12 = 4
In the above example the result would be 0 since the 1st value was -22
I am revising a spreadsheet to automate some cells and size cable for my job. I am currently using the VLOOKUP command to search a table for the proper ampacity and return a cable size based on the minimum circuit amps. The problem however is the VLOOKUP command searches for a number equal to or less than my circuit amps and returns this cable size. I need it to return a size equal to or greater than the minimum circuit amps. How do I get it to lookup something equal to or greater than the minimum amount?
View 9 Replies View RelatedI have 2 worksheets, and I was wondering if I can have a cell from Sheet2 equal to the subtotal of the Autofilter criteria of a column in Sheet1.
I do have something working with macros but it takes a long time. This would make things a lot easier.
I have a table and the first column headed "Arrival Date" contains dates. I then have some buttons on a form which enable me to quickly filter the table to show "Arrived Today", "Arrived Yesterday" and "Arrived last 3 days". The today and yesterday macros work fine, for example, the following code is used to filter for "Arrived Yesterday"
ActiveSheet.ListObjects("Table1").Range.AutoFilter Field:=1, Criteria1:=Format(Now() - 1, "dd/mm/yyyy")
The problem is the filter does not work for "Arrvied last 3 days", the code for which is as follows:
ActiveSheet.ListObjects("Table1").Range.AutoFilter Field:=1, Criteria1:=">=" & Format(Now() - 3, "dd/mm/yyyy")
When I apply his macro it displays no records and yet if I manually go into the filter everything appears to be OK. If I then use the date picker within the filter to essentially re-select the date that the macro has already specified then the filter works.
I am using cell V7 to input the formula but I want cell V7 to tell me if the number in U7 is greater than or equal to the individual #'s in cells U7-U40 and I would like it to put a 1,2,3 in the cells of V7-V40 for the three highest numbers in order of largest to smallest if is this possible?
View 3 Replies View RelatedI want to display a warning pop up message when the following cells (Cell A1:A10) is greater and equal to 3.
I would like some code in VBA
In my Excel spreadsheet I enter todays date in a single cell (A2), then I list various dates that jobs come into shop in other cells (A8:A108). I have cells ( F8:F108) where I have been manually entering an asterik (*) for those jobs equal to or greater than five days old in cell (A2). Is there a formula that can do the math for me? I've tried Excel help but to no avail.
View 3 Replies View RelatedFilter below:
Code:
Sheets("Sheet1").Range("$A$3:$AO$64999").AutoFilter Field:=1,
Criteria1:=Array("0" _, "1", "2", "3", ""), Operator:=xlFilterValues
Now I would like to change to exclude these values, tried some tricks, like:
Criteria1:=Array("0" _, "1", "2", "3", ""), Operator:=xlFilterValues
but not working.
I have what may be a math question as much as an Excel question. See my attached spreadsheet example in which I grow the denominator of a ratio by a fixed percentage until it equals or exceeds the numerator. This results in the denominator being grown X number of times.
View 2 Replies View RelatedCode:
Selection.AutoFilter Field:=5, Criteria1:=Array("CHF", "DKK", "EUR", "GBP", "NOK", "SEK", "USD")
I am trying to use VBA to filter a list for not equal to. See line above. I want to filter a table I have for unknown Currencies basically.
I'd like all Cells in column AC (e.g. AC$3$:AC$517$) to be filled with yellow fill if the cell value is any date greater than or equal to today. Any past dates can be left blank (for now)
=$AC3>=TODAY()
SUMIFS with less than & more than
I found this thread which works for normal ranges
I want to Sum for Values Greater than a specific date in my formula.
This first one works for a specific date (Relevant reference in red), so say 01/01/2014
Code:
=SUMIFS(Table2[[#All],[Basic]],
Table2[[#All],[Cluster]],Table3[[#Headers],[Company]],
Table2[[#All],[Start Date]],Table3[#Headers],
Table2[[#All],[Perm / Temp / Prof / ETA]],[@Company])
Code:
To Sum for ranges >= 01/01/2014, I have tried this below based on the thread above but Excel does not accept this.
=SUMIFS(Table2[[#All],[Basic]],
Table2[[#All],[Cluster]],Table3[[#Headers],[Company]],
">="Table2[[#All],[Start Date]],Table3[#Headers],
Table2[[#All],[Perm / Temp / Prof / ETA]],[@Company])
I am trying to make a condtional formatting to a cell, so that it will change colour depending on the time since the date in the cell. I am trying to check for Less than 6months, equal to 6months and greater than 6months.
View 4 Replies View RelatedI have to make a table that shows that a if someone purchases
less than 5 items they receive no discount
5-10 items they receive 2% discount
11-20 items they receive 5% discount
21-50 items they receive 8% discount
over 50 items they receive 10%
and it has to be done in a way that the discount rate can be calculated using Vlookup I am struggling to find the best way to write this table. i tried numbering 1 to 50 and writing the corresponding discount rate in the second column but this looks untidy and can't calculate greater than 50 as i am not sure how to write it in the cell so it reads as >50 and not just 50.
Im sure this is a very common problem. I tried searching for it but I havent found anything that solves this for me. Here is the code Im using:
View 3 Replies View RelatedI'm having trouble with a small vba macro. At the end of the macro I test to see if two variables are equal and then print out true or false. However, for some reason even though the variables are equal vba is not treating them that way. I have put the values that represent the variables on a spreadsheet and used the if(x1=x2) formula and it says it is true, also, when I debug the macro and watch the values when it comes to test the logical expression the numbers are the same. I don't understand why vba does not say that the two variables are equal. I have attached a screenshot of the breakpoint where I double check the values are equal.
View 2 Replies View RelatedI can select the top cell in column "F" after filtering by multiple columns using VBA and arrays, but now want to I want to use the top cell in column "F" to search for all other equipment that uses this item.
E.g. remove filter, and reapply autofilter to column "F" based on selected cell as per below VBA
Note: Row 1 contains command buttons and row 2 Headers.
How to correct my formula because it does not work?
Here the formula: =COUNTIFS(Data!C2:C24005,A17,Data!M2:M11149,"<=0")
I need to insert the formula in column C (Findings tab) which counts the rows in Column M (tab named "Data") that equal A17 (Column A in "Findings" tab) and which are less or equal zero. In addition if I drag the formula down I want to only the values be entered in highlighted in blue cells in column C (SKUs With Zero Sales in "Findings" tab) and empty cells in not highlighted cells. I attached images of these two tabs: Data and Findings.
I can set the autofilter, change it, remove all using Macros. What I need to know how to do is reset a filtered column to ALL while leaving all other filters on.
View 2 Replies View Related
