In sheet1 (SA Awards) I have the source table for my pivot table in Range ("A1:G50"). In sheet2 (Team Listing) my pivot table is located in Range("K2:S13")
When I make changes in sheet1 I need my pivot table to update, I recorded a macro to refresh, however have only got it to work via a button & only if Sheet2 is unlocked
1. How can I get this to work in the Worksheet_Change Event?
2. How can I password protect Sheet2 & still have it work?
I have a pivot table report connected to an external data source (OLAP cube).I want to automatically refresh the pivot table report everytime the OLAP cube data changes.
I know we can use Automatic refresh on open of workbook or time intervals after which to refresh .But i want the auto refresh to work even if the workbook is already open and there is no definite time interval after which the cube is likely to change.SO,by defining intervals for auto refresh i do not intend to waste time refreshing even if there is no change.
There are multiple pivot table reports and pivot charts connected to the same OLAP cube.
When I creating a Pivot Table Report on a different sheet. I have attached the Stock Report, where I have created a Button at the top to create the report, but the worksheet name is the default Excel name rather than the one that I want (in my case the name of the new sheet should be "Admin".
I have a summary sheet that pulls data from several worksheets. I have a filter on column I that hides all rows that have zero values in that column. Once I protect the sheet I cannot get the filter to update as the source data changes. I have tried other macros from forums but I cannot get them to work. I would like the filter to update every time that the workbook is calculated.
I currently have several pivot table that's linked to a single pivot table(let's call it X) in the same workbook. I'm doing this to limit the file size because the data in X comes from a text file that has millions of lines. However, it's such a pain every time I need to update the tables because simply clicking "refresh" does not update those tables that are linked to X with new data. I would have to instruct the wizard in every linked table to point to X every time. I'm trying to write a small program to re-point to X for each of those other pivot tables whenever i refresh data. However, after trying to record the steps to do this I'm still unable to run these
I have enable Refresh on Open for my excel pivot table, but user need to click "Enable Automatic Refresh" , only solution i came across is to change the registry setting. Which i dont have access to edit registry(admin disable the access).
Alternate solution i try to use Access macro to automate the process and use Outputto save it as a excel file A. Then use excel file B to update pivot table from excel file A.(as excel A data is always latest) The problem is i will get "....A file name already exist...do you want to overwrite.." prompt. Which defeat the automate process.
Any other solution to enable the automatic refresh on open the excel workbook?
Or Access can overwrite the exist file or save it as another file name with timestamp ?
I have a protected worksheet containing an SQL query. I have two cells on the worksheet unlocked so that users can enter fresh parameters to feed the query. Because I have to use MS Query to interrogate our SQL server (current IT decree), the query won't support parameters directly when the query cannot be represented graphically - so I have to manually edit the sql command text and then refresh the query - or at least that was why I wrote the code below
The problem: My macro won't unprotect the sheet before it calls the SQL.it therefore won't update the sheet to detail the DSN, command text and number of parameters (latter should be 0) - info just used to verify queryit won't run the query / return the data as the sheet is still protected Comment: I have had to remove sheet protection in order to allow the sql to execute and return data. If protection is removed, the query does execute and return data ( changes in the "parameter" cell contents do cause the query to be correctly modified) I could comment out the debug info but the query still doesn't return data if the sheet is protected.
Activesheet And worksheets(ndx) where ndx has been defined As ActiveSheet.Name I apologise If my post Is difficult To follow - especially the code.
I've used this code prior and it worked fine in Excel 2007, now I'm having issues with it. Originally every Pivottable & Query pointed to a different CSV file. Now I have two pivottables built off a Excel worksheet that is built from a Query. This allows me to do some complex lookups that I couldn't do with just the Pivottable and MS Query alone.
Here's the code that's failing out: Any problems with it in Excel 2007?
Private Sub Update_All_Data_Click() Dim pvt As PivotTable Dim ws As Worksheet Dim qt As QueryTable
mytitle = "This will refresh all data for validation, are you sure?" Msg = "The Refresh process takes about 5 minutes, are you sure you want to continue?" Response = MsgBox(Msg, vbExclamation + vbYesNo, mytitle) Select Case Response Case Is = vbYes ' Do Nothing, continue with program Case Is = vbNo Worksheets("instructions").Range("a1").Select End End Select
For Each ws In ThisWorkbook.Worksheets For Each qt In ws.QueryTables qt.BackgroundQuery = True qt.Refresh Next qt Next ws
For Each ws In ActiveWorkbook.Worksheets For Each pvt In ws.PivotTables pvt.RefreshTable Next pvt Next ws
mytitle = "Confirmation of data refresh" Msg = "The data has been refreshed" Response = MsgBox(Msg, vbExclamation, mytitle)
I am running XL 2008 on a Mac and have created a pivot table that works well. However, without VBA (and I don't know how to write in Applescript), is there a way to put a REFRESH button on my spreadsheet?
I now have a Pivot table on my worksheet that works great, the only problem I have is I would like it to refresh my data at the push of a button. I now have to click on a cell where the pivot table data is>right click the mouse>select refresh data and then I get the updated info. I know you can install a button to to this exact same thing but I don't quite know how to. I need step by step instructions. I tried OzGrid search, but did not find exactly my need.
This is what I did thus far I opened my work book>click on data>then macros> record new macro>I got a pop screen>I named the macro Refresh_Pivot_Table>store to this workbook>click OK> I see at the bottom left of my screen that the macro is still recording> I then highlighted the Column of cells where the pivot table data is and then clicked>tools>macro>stop recording.
This is the point where I'm lost. What is the next step to do? When I go back to the cell where I began to start the macro and right click I don't get the option to create a text box so that I can make a button and assign the macro I just recorded. Is this the correct method or did I miss something?
I have a macro to refresh all pivottables in my workbook. Each pivottable source from the same data pool - in addition I have a filter on each pivottable. Is there a way to fix this filter, such that once the source data is updated, the filter doesn't change? Or to only refresh the "data" in the pivottable?
My code for refreshing all pivottables is given below.
Dim pvt As PivotTable Dim sh As Worksheet Application.Calculation = xlManual For Each sh In Worksheets For Each pvt In sh.PivotTables pvt.RefreshTable Next pvt Next sh Calculate Application.Calculation = xlAutomatic
I have two pivot tables on the same worksheet, tied to different tables, but both have a "date" column. When I change the date in either tables Report Filter this code does change the page field in the other one, but the data does not refresh. My primary table is PivotTable2, once I can get this working I would hide that report filter in PivotTable1.
Code: Private Sub Worksheet_Activate() Application.ScreenUpdating = False PivotMacro PivotMacro1 Application.ScreenUpdating = True End Sub
I have written some simple VBA code so that on Sheet 4 I have a drop down list box to choose the month.
When the month is chosen by the user it moves to the active cell and changes the dates, as well as dates in some other columns (I used activecell.offset ....).
This code runs perfectly fine when I haven't refreshed the pivot tables in the workbook. But straight after a refresh, if I try and change the month it gives a run time error and gets stuck at the first instruction:
Basically my search value is in B4 however to refresh pivot table this is fine when I enter plain text within B4
I have trouble with an vba code using pivot tables
Private Sub Worksheet_Change(ByVal Target As Range) 'set handler for unexpected issues On Error GoTo Fatality 'exit unless cell altered is that pertaining to the PT Page Field If Target.Address(0, 0) "B4" Then Exit Sub 'validate selection Select Case IsError(Application.Match(Target.Value, Sheets("DATA").Columns(2), 0)) Case True 'invalid selection MsgBox Target.Value & " Invalid Store Number - PT Not Refreshed & Selection Reset", vbCritical, "Error" Application.EnableEvents = False Application.Undo...................................
I have a workbook that reports data on a daily basis within a month. I receive data daily from a different workbook and import the data for the day in its correct worksheet which has functions that automatically calculate everything I need, which then gets collected from a central worksheet which accumulates the "Total".
However, I have recently added 2 new pivot tables to my analysis, and apparently when i copy/paste the pivot tables to each new sheet, the data source is references the original sheet where the pivot tables come from.
I tried doing a dynamic name range, and that states the worksheet name in its reference as well.
How can I make a Pivot Table, gather the information from the same range $A$1:$J$5000, but only for the sheet in which the Pivot Table lies.
The sheets are labeled by the day of the month.
So, data for February 1, 2009 is worksheet "1" February 14, 2009 is "14"
I have a Pivot Table feeding a chart that needs specific formatting
However, after a Pivot Table refresh, the chart loses any custom formatting and returns to the default formatting.
(I know I can create custom user-defined charts but I don't want to do that here)
What I would like to happen is for a (chart formatting) macro to automatically run after a pivot table refesh occurs. It should only occur on the one worksheet that contains the Pivot Table and associated chart and should run the macro after a refresh REGARDLESS of whether the data within the table was updated or not.
I have an existing pivot table that is feeding from data in another sheet.
The data gets updated every month and sometimes their are more columns of data than the previous month. Everytime there are more columns they are not added into the pivot table when i refresh the table even though they are included in the range.
Is there are way the pivot table will add these new columns when i refresh the table without me having to manually drag them in?
A simple example of the problem: Imagine a pivot table has two pagefields at the top. The first list the gender ("boy" or "girl"). The second one below it lists people's names. How can it be programmed so that when the first (gender) filter is selected to "boy", pagefield 2 (the names) will only display the names of boys. So I would like the pagefield to work like regular multiple filters would. (And not list every possible item for all)
I have a pivot table in spreadsheet A. I have some formulas in another spreadsheet B. The formulas look up data in the pivot table in A and use that data in B to return and answer. Is there a way to refresh the pivot table in A from B without having to open A and refresh the table?
I have a very strange problem with a pivot table in Excel 2007. The source data is in a table in another workbook, stored on a shared network drive. We have 7 PCs in our office, and on 6 of them the pivot table refreshes fine. On the other, it always comes up with an error message that the reference is not valid, even if the source workbook is open. This particular PC is connected by a cable, so it can't be a wireless network problem.
All the PCs have got all updates installed, and as far as I can see the Trust Centre settings are the same (the problem PC can run macros from the same folder without problems). The really annoying thing is that the user of the problem PC is the only person who actually needs to refresh the data as part of her job.
I've referenced a few threads this one in particular [Solved] Pivot Tables : Refresh on protected sheet
I've tried the example given in the link and it still does not work. I want to protect the sheets that contain pivot tables, but still be able to refresh them. When I try I get an error. I've tried this a few ways.
My first attempt was to protect the sheets using allowuserinterfaceonly at a workbook open event. This caused warnings as soon as the workbook was opened. Then I tried Dave's suggestion and I get a runtime error 1004: Cannot edit PivotTable on protected sheet.
I have some code that runs and loops through each pivot table to refresh it; however, I remmed out the code so that it only loops once - telling it to refresh the first pivot; the thing I'm confused about is that after the code runs, it appears to have refreshed all my pivots. I think it's also important to note the each pivot table is linked to the same data source. (an external ds)
Maybe when this is the case, refresh will always refresh all?
when I refresh data in a pivot table. Each time I click 'Refresh All' it alternates between a refreshed version (up to date with source) to an earlier set of data. This is concerning because operators will not be aware that they are not using the most up to date data 50% of the time.
I can't understand why my rate1() function (my macro) doesn't work properly. While I'm dragging M5 cell in Sheet2 down to M14 cell it gives the wrong result. Even when I change value in Sheet1 and refresh data of pivot table in Sheet2, my function rate1() isn't updated. But my problem is solving (getting the correct result) when I'm going Edit Mode (pressing function key F2) in active Cell M5 or M6 or M7..so on and pressing Enter each time.