I would like to do a an automatic table using if statements following as goes:
If product is = Chosen product letter and the model is =chosen model than = give dimension
Product and Model are related to eachother which throw a specific Dimension. I know i can do this using AND function, the problem is each product has several Models, this combination is what i dont know how to solve.
using a normal If statement is not possible in my opinion (more than 43 combinations) is there anyway to do this?
This is an example extract of the 14 possible products:
I have three IF statements as below. the problem is if the first statement is true I want it to skip the next two statements or the result will be changed again.
i'm trying to populate a sheet with 7 tasks (blue colored) for 22 Employees
by this rules: task 1 for 1 person task 2 for 2 person task 3 for 5 person task 4 for 2 person task 5 for 7 person task 6 for 1 person task 7 for 4 person
doing this by hand it's time consumer so i'm looking for an automatic solution.
When I creating a Pivot Table Report on a different sheet. I have attached the Stock Report, where I have created a Button at the top to create the report, but the worksheet name is the default Excel name rather than the one that I want (in my case the name of the new sheet should be "Admin".
I create a Pivot Table in Excel 2003, excel by default puts the field settings for each of the columns to Automatic, creating a Total for each aggreate column, which is very annoying.
I have to manually go in in each field and change field settings > None. for each column, since no copy and paste special function to make all the columns have same subtotal >none.
In sheet1 (SA Awards) I have the source table for my pivot table in Range ("A1:G50"). In sheet2 (Team Listing) my pivot table is located in Range("K2:S13") When I make changes in sheet1 I need my pivot table to update, I recorded a macro to refresh, however have only got it to work via a button & only if Sheet2 is unlocked
Sub PivotTableUpdate() Sheets("Team Listing").Select ActiveSheet.PivotTables("PivotTable8").PivotCache.Refresh Sheets("SA Awards").Select Range("B2").Select End Sub
1. How can I get this to work in the Worksheet_Change Event? 2. How can I password protect Sheet2 & still have it work?
Is there a way to write a forumula that read, if it's January, add column A1:A10, if it's February, add column A1:B10, if it's March, add column A1:C10 and it's April, add column A1:D10
I have a pivot table report connected to an external data source (OLAP cube).I want to automatically refresh the pivot table report everytime the OLAP cube data changes.
I know we can use Automatic refresh on open of workbook or time intervals after which to refresh .But i want the auto refresh to work even if the workbook is already open and there is no definite time interval after which the cube is likely to change.SO,by defining intervals for auto refresh i do not intend to waste time refreshing even if there is no change.
There are multiple pivot table reports and pivot charts connected to the same OLAP cube.
I have attached a sample spreadsheet for your review. I think I need to combine multiple IF statements into one single statement. See column I:
There is currently a formula in Column I that looks at Column H and computes a ROUND formula based on this information. Unfortunately, this formula only works if Column J says "MB". If Column J says "Minutes" then I need Column I to compute with this formula: =IF(H2<30,0.5,ROUNDUP(H2/60,1))
How can I combine this with the current formula to get what I am looking for? Here is the current formula (for MB): =IF(H2<0.125,0.125,ROUND(H2,4))
I have attached a copy of my monthly work schedule. Sorry if it looks too noobish but I am. The question I have is on the schedule right now, it uses to of the same schedule, one is called request off and the other the final. The request off right now is where all changes are made, and they reflect on the final. I did it this way because I could not figure out how to make the cells autofill according to the day of the week, like if it was friday i needed it to fill in the shifts and normal days off automatically.
What I am trying to do now is eliminate the need for the second schedule, the request off one. I think I have figured out how to have the cells autofilled according to the day of the week, and also let the user enter in other stuff such as sick, vacation or whatever, and have it autofill if the cell is left blank, using vba. this is what i have so far, and it is working I was just wondering if it was possible to set it up for a range of cells instead of having to enter each one in manually.
If my input page B13 is either New Lease In-House or New Lease w/Co-Borker andmy input page B43 is - then take cell D57 in my Analysis report, mulitply it by cell B32 from Input page and divide it by 2, otherwise, take cell D57 on the analysis report, mulitply it by B42 on Input page and divide it by 4. I think I have a mess up with my brackets. This is what I have: =IF((OR('Input Page'!B13="New Lease In-House",'Input Page'!B13="New Lease w/Co-Broker"))AND('Input Page'!B43="-",'Analysis Report'!D57*'Input Page'!B32/2,'Analysis Report'!D57*'Input Page'!B32/"4")
I want to create a formula that will turn B2 in floors if A2 has /1 with its formula, Ceilings if it has /2, walls if it has /3, and M&E if it has /4. For example 456-401/2-1569 in cell A2 will populate ceilings in B2. I know I can create If statements but I can only figure out how to do this to search for one text and populate one word. I know Vlookup is possible but this spread sheet will be blank and as people populate there information I need the cells to automatically populate the data into the B column. how I can create the right formula?
I would like to add an AND function so that the IF statement also looks at the month which is represented in this case as $E$7, the formula I have been trying is:
I have a userform with 14 independant checkboxes on and would like it when the operator presses the 'go' button for the code to look at each box and if ticked put a "Y" in the column on a spreadsheet associated with that checkbox.
I have this portion of code set for each checkbox within the sub function, but it's a lot of code for something relatively simple:
I have are two listboxes set up, one with all the states, the other with 7 possible variable selections. So in my case I have 371 (DC, Virgin Islands and Puerto Rico are included as states in this) possible combinations here. With each combo the user needs to be able to enter up to 2 years of quarterly data (8 quarters, so 2968 pieces of data possible) and then press a button to save that data to a specified location which I will need to access at run of the overall macro.
Is there an easier way to do this then to simply assign each combination a cell? Maybe an If State = AK and Variable = TUR then find column = AK & row = TUR (per quarter) type solution?
I'm using one spreadsheet "Take Off", to pull data from a cell which dictates an objects shape, based on this shape I have a very large IF statement that pulls data from an adjacent cell where an objects dimensions are entered, the statement than proceeds to use these dimensions to calculate the weight of the object.
I've run into the problem with only 7 IF statements, I have gone online and tried to figure out how to avoid this since it is a common problem, but I can't figure out how to do it, most of the examples show very simple and basic formulas. I am unable to figure out how to translate this into my IF statement where I make reference to many cells as well as us differant formulas within the IF statement.
My latest solution was to breakdown the IF statements and try to my my own functions but I think I am too green to have done this properly. Any guidance would be greatly appreciated.
The following is the code I'm working with followed by how I tried to remedy the situation:
and so on until hCalc, but when I put them together in a cell like this: =aCalc()+bCalc()+cCalc()+dCalc()+eCalc().... I get an error #REF.
I realize a problem might be that I'm referencing a specific cell within my formulas, and many examples online show cells referenced in the form =A$1$, is there a differant way for referencing a cell, because currently I rely on Excel to automatically do this by way of relative reference.
ADDED: Ok I scrapped making the functions because I'm not sure and I did some research on VBA so I tried this one:
Function Weight(Shape As String, Amount As Double, Dimension As String, Optional Length As Variant) If (Shape = "BPLT" Or Shape = "L") Then If (Amount > 5) Then Weight = Get_Word(Dimension, "First") / 1000 + Get_Word(Dimension, 3) / 1000 + Get_Word(Dimension, 5) / 1000 * Get_Word(Dimension, "Last") * 7850 Else Weight = Get_Word(Dimension, "First") / 1000 + Get_Word(Dimension, 3) / 1000 * Get_Word(Dimension, "Last") * 7850 End If
But when I try to put Weight(C6,D6,F6,E6) I run into the error "Sub or Function Not Defined"
I have a worksheet and in one of my columns I can have multiple values, this could either be a valid numeric value, .e.g "Trace" or a value such as >1.5 or it could be blank.
Depending on the value I then want to return a different result in another cell.
In the example I have tried my data is in cell E8
I have tried the following formula and failed miserably, I'm not sure whether IF or IF OR can cope with this.
I need to multiply the result of the 3 if statements as shown below in one cell Each of these 3 if statements output an integer and I need to multiply the value of each of these 3 output integers to get the final output integer. syntax of multiplying if statements outputting an integer?
Here is the first required formula, which will go in cell P7:
If N7>=75 a value of "Y" should be returned. If not, a value of "N" should be returned. BUT if N7 is blank, a blank should be returned.
Here is the second required formula, which is more complicated, and will go in cell Q7:
(1) If Cell P7="Y", then a "Y" needs to be returned in the cell. (2) If Cell O7>=2, then a "Y" needs to be returned in the cell. If not, then a "N" needs to be returned. (3) If Cell P7 is blank, then the cell needs to remain blank.
Here is the final formula, which will go at the bottom of the page.
I need the Q column to return an average of the number of "Y" values, not counting the blanks as numbers. (For instance, if there were 18 "Y"s, 2 "N"s, and one blank, the value returned would be 0.90.).
Im looking to make a formula that states if b3 =10 then a. if b3=12 then b, if b3= 14, then c, if b3=16 then d. A, B, C, D are referring to links to another sheet.
