Trying to create a code to automate the population of a simple table of Job Grades against Business Units (BUs) with Job Titles.
The data source will kind of look like this:Job Title
Job Grades
BU
Sales Manager
A
1
[Code].....
i'm trying to populate a sheet with 7 tasks (blue colored) for 22 Employees
by this rules:
task 1 for 1 person
task 2 for 2 person
task 3 for 5 person
task 4 for 2 person
task 5 for 7 person
task 6 for 1 person
task 7 for 4 person
doing this by hand it's time consumer so i'm looking for an automatic solution.
i used excel 2007
I have a pivot table report connected to an external data source (OLAP cube).I want to automatically refresh the pivot table report everytime the OLAP cube data changes.
I know we can use Automatic refresh on open of workbook or time intervals after which to refresh .But i want the auto refresh to work even if the workbook is already open and there is no definite time interval after which the cube is likely to change.SO,by defining intervals for auto refresh i do not intend to waste time refreshing even if there is no change.
There are multiple pivot table reports and pivot charts connected to the same OLAP cube.
I currently written the following formula, but always have issues when adding additional depending on selection.
D8 is the selection ( Validation ) on PERF EXP FORM Tab, Once you enter the selection... you then go to the Accounts per hour Worksheet
=IF('Perf Exp Form'!$D$8="Test1 14-18 station",IF(('10220DBHE'!B9=A6),IF('10220DBHE'!C9 > 11000,11000,'10220DBHE'!C9),"N/A"),"N/A")
Perf Exp Form
Perf Exp Form *ABCDEFGHIJKLMNOPQ4 *1. GENERAL INFORMATION****************5Customer***Date / Name(s)*6ApplicationSheet Size1UP/2UPOrientationSOG/EOGFold TypeFold Plate# CH***78 1/2 x 142 UPPortraitSOGLetter/ZHeavy1***8Machine / model**Enduro 4-6 station9ConfigurationCHANNEL 1CHANNEL 2CHANNEL 310590-4720-4910 Dual DeckNONENONE11Date / Name(s)*** Excel tables to the web >> Excel Jeanie HTML 4 ......
I am an undergraduate biology major working on a geometric morphometrics project. It is focusing on wing asymmetry, so I have data for the left and the right wings for a sample population of 30 individuals. The data from the software is exported as a spreadsheet with two rows of data for each individual, since each wing was calculated separately, and my mentor has asked me to average the data for subsequent analyses in another program.
I'd like to do this easily with an Excel formula, but when I try to do the averages I'm having a little trouble getting the formula to carry on correctly. I need it to average, say, E2:E3 then the next cell average E4:E5, but instead the only thing I can get it to do is average E2:E3 then the next cell do E3:E4. Which obviously doesn't work for me, since E3:E4 is data from two different individuals.
Is there a way I can do this for my data? One of my spreadsheets is a 60x32 matrix of landmark coordinates, so I'd really rather not try to do all the cells individually.
I would like to do a an automatic table using if statements following as goes:
If product is = Chosen product letter and the model is =chosen model than = give dimension
Product and Model are related to eachother which throw a specific Dimension. I know i can do this using AND function, the problem is each product has several Models, this combination is what i dont know how to solve.
using a normal If statement is not possible in my opinion (more than 43 combinations) is there anyway to do this?
This is an example extract of the 14 possible products:
Product
Model
Dimension
D
300Lx150
1x2
[Code] .....
When I creating a Pivot Table Report on a different sheet. I have attached the Stock Report, where I have created a Button at the top to create the report, but the worksheet name is the default Excel name rather than the one that I want (in my case the name of the new sheet should be "Admin".
View 3 Replies View RelatedI currently have a pivot table linked into a excel query. This pivot table is refreshed everyday and looks at the following data:-
PAGE - Username
ROW - Date
DATA - Output
What I need to do on a regular basis is select the pivot table field Username and hide specific staff which are new to the table.
My question is can i create a code which will only show usernames from a given range e.g. Sheet 1 A1:A10 in this field?
I create a Pivot Table in Excel 2003, excel by default puts the field settings for each of the columns to Automatic, creating a Total for each aggreate column, which is very annoying.
I have to manually go in in each field and change field settings > None. for each column, since no copy and paste special function to make all the columns have same subtotal >none.
In sheet1 (SA Awards) I have the source table for my pivot table in Range ("A1:G50"). In sheet2 (Team Listing) my pivot table is located in Range("K2:S13")
When I make changes in sheet1 I need my pivot table to update, I recorded a macro to refresh, however have only got it to work via a button & only if Sheet2 is unlocked
Sub PivotTableUpdate()
Sheets("Team Listing").Select
ActiveSheet.PivotTables("PivotTable8").PivotCache.Refresh
Sheets("SA Awards").Select
Range("B2").Select
End Sub
1. How can I get this to work in the Worksheet_Change Event?
2. How can I password protect Sheet2 & still have it work?
Ok, so this is my first attempt at an excel macro. I'm trying to develop a macro that will assist me in auto-populating a column in a new worksheet based on another worksheet. Recently I ran a new report at work that is 4000 lines long that I really do not want to have to edit by hand, since I already had to do it with the older one.
I can't post my data but i'll try to explain it the best I can, but basically it's set up as a part number, next column is the steps in completing that part, and then a workcenter number. I'm trying to populate that workcenter column in the new worksheet. I've put this macro together with the best of my ability along with excel help and the internet but I just can't seem to get it to work.
Excel has a QUARTILE function to divide a population into quartiles. I'm trying to do something similar but divide a population into deciles (i.e., every 10%). Is there any easy way to divide a large population into deciles and to assign a decile to each value in the population (i.e., top 10%, 11-20%, 21-30%, . . . bottom 10%)?
View 2 Replies View RelatedI would like to Know which formulas to use for the attached example.
I need to create a form that auto populates all other information to the right of the ref number.
So if I add a ref number i.e. 101 then the the adjacent three columns should take info from the second sheet.
and also how to copy the formula to other rows so that the info relates to each line and relevant ref number.
I can do dropdown for the ref number but need to know the rest!
I'll insert the code below. Basically I'm taking the sheet titled Old and based on part number then op number, automatically populating the new work center in the new sheet. It runs but seems to be caught in an infinte loop.
Sub DataPopulate()
Dim varOperNo As Variant
Dim varPartNumber As Variant
Dim x As Integer
Dim SFCTimesNew As Worksheet
Dim SFCTimesOld As Worksheet
Dim pnfind As Range
I'm trying to make a sales chart defining the top 6 most popular items I'm having a problem.
Attachment 316136
See attached picture. This shows Profit and Growth for the stores in each region.
The percentage total is weighted based on the profit of each store in the region.
What I have is an excel sheet with hundreds of regions (going down), all with a different amount of stores. I need a way to populate each of its Region % Total with the weighted average formula (in my example, cells C8, C12, and C20) while also varying the formula to include only the stores in the region.
For example, C8 calculates the weighted average for %s in rows 2 through 7 (6 stores), but C12 calculates it for rows 9 through 11 (3 stores). I need the formula to vary based on the number of stores.
I want to calculate the standard deviation of a whole population in my database (total population: 36,458)
I used the STDEV equation however, I went into help and it says that the equation calculates STDEV based on a sample of 30.
I don't want to calculate a standard deviation based on a sample. I want a standard deviation based on the whole population. Is it still okay to use the equation?
The reason I want to calculate the standard deviation is so that I can use that number to calculate the sample size needed for my population so I can create a histogram.
How you do use excel to calculate a sample size using the population, error limit, confidence level and upper error limit rates?
View 9 Replies View RelatedI am trying to create a filterable To-Do List. My goal is to enter each item with a userform, which I have created and pops up upon clicking the "Insert" textbox. making the following macros happen:
1) I would like to insert the new item in a row at top of existing info, below the headers, with the populated information from the userform when you click the "Add" Commandbutton on the Userform.
2) I want to make sure any filtering is reset whenever a new item is entered so the list reverts to original appearance.
Attached File : To Do List.xlsm
I want to be able to create a log of incoming orders and requests with a column containing initials of the person who will be responsible for handling the item entered. From this sheet, I want to populate other worksheets in the workbook with the data base on the initials placed in the first column. Each initial set would have its own dedicated sheet in the workbook.
Is it possible to create and IF "ST" in column A of main log THEN copy all data to designated fields on the ST worksheet?
The following are a few of generally accepted values: ...
View 8 Replies View RelatedThis is in Excel 2010
I have, what I believe a fairly complex request.
I have 3 fields that will be entered manually per row
Frequency in weeks = FQ Example FQ = 4 weeks
Duration in hours = DUR Example DUR = 3 hours
Start Date in Date Format = SD Example SD = 01/15/14
I have a series of columns starting at December 30, 2013. This represents the week of December 30th 2013.
It continues on until I hit the last week in December of 2015 which is 12/28/15
There are multiple rows with the 3 entries listed above (FQ, DUR & SD).
I need a function or macro that takes the Start Date (SD) for the specific row and finds it's location in the series of columns (for the example of 01/15/14, it would land on week 01/13/14). The program would enter the Duration (DUR) in that Column's Row (if that makes sense).
The program would then add the Frequency (FQ) to the Start Date (SD) and look for the next column (or Week) that it would fit in and once again enter the Duration (DUR) in that cell.
It would do this until it hits the 12/28/15 end date.
I'm trying to create a new spreadsheet to keep a record of orders recieved.
the example attached. What I would like to do is:-
Enter data in the Order Sheet (Sheet 1) under Column C, from a drop down menu taken from Data Sheet (Sheet 2) Column B. I then want Excel to filter the items available from Sheet 2 that correspond to the colour chosen, and once that has been done, I want the part number to be automatically entered.
For example, I order a Red pen, I type/select Red in C2 in D2, I then want Excel to only show the items related to the Red pen Fine nib rd123, Medium nib rd234, Thick nib rd345.
Not sure my subject is matching to my problem. This is my first Thread. I work in excel sheet to tracking meters and am and my boss updating this sheet. This sheet we have in server drive so we both can share. The problem is I need some formula to update automatically whoever updates last in sign column. E.g. Computer id, or something. I attached sheet for more clarification.
View 5 Replies View RelatedI'm kind of rusty with spreadsheets and Excel 2007 is entirely new to me. I'm not even sure what I'm trying to do would be called.
I have a spreadsheet that is a list of records; a name, ID number, one text, and four numeric columns per record.
I would like to make a set of buttons or something that will automatically do a custom sort. Basically a "sort by this criteria, sort by different criteria" etc. so I don't have to manually do the sort repeatedly.
It i a sheet to calculate my nutrition. But since the sheets has grown to get bigger and bigger (and fortunately me as well ) some bugs has started to appear. This is really annoying and I have to use another sheet with less values in it which I can use manually on the side since it seams to only work properly when less values is entered in the sheet.
Open the file attached. The first sheet called "oversikten" is where you can see the trouble. The gray fields you can edit freely and in these fields you should be able to insert a type of product (food) which also is in the list in the nexy sheet called "produkter", and the first sheet should then automatically get the values for the written product given you have written the exact same word as the product in the list (list: in the "produkter" sheet). But for some reason this has stopped working. Now only a few in the beginning of the list is working as it should and most of the products will not be transferred to the first "oversikten" sheet. I've only copied codes and stuff so I have no idea what is wrong and how to fix this.
fix the codes in the program so that any product written in "oversikten" will get its correct values transferred from the "produkter" sheet for all the registered products now and for the new ones I enter in the future. I love this little nutrition program of mine.
i have in sheet1, where the client key in the data, and sheet2 where i have to give the latest data to my manager. i tried with isblank and sort but in vain.. attaching the sheet.
View 4 Replies View RelatedI have a workbook with many worksheets and I want to enable (or disable) it to "Refresh every n minutes" for ALL worksheets, as at the moment it seems I can only specify this option per worksheet rather than the whole workbook?
View 1 Replies View RelatedI have an excel file with a link to an access database. when you open the excel file it prompts to refresh the data enable/disable. I select enable and the excel file is saved as a different file and the query reference in the new saved file is deleted (static version)
I have managed to write code to remove the database link from the new saved as file but what I still havent figured out is that the source excel file is refreshed automaticly when the script is running. I have set the database properties on automatic refresh on open which works if I activate manualy the file but with script down below, it does not refresh the data automaticly. What is the VB code to refresh the data in the source XLS file??
Sub main()
Dim prompt As Long
prompt = 200503
Dim objExcelApp As Object
Set objExcelApp = CreateObject("Excel.Application")
objExcelApp.displayalerts = False
objExcelApp.Workbooks.Open "c: emp est.xls" 'this file has the connection with the access database.
objExcelApp.Visible = True....................
I want to automatically update data from one spreadsheet to ther one i am novice to vb programming
here are two file plzzz help me out --sheet 1--sheet(data of sheet one to be copied into)
and is there any way that the data copied also gets saved the in that spreadsheet as next time data in sheet 1 is updated!