I am preparing a simple document for employees to use that requires viewing two sheets simultaneously.
To make it user friendly I would like, if possible, to save it so that when opening the file, the two sheets open side by side without the user having to open the new window and juggle with window sizes etc.
I have a great bit of code for a spreadsheet I'm working on by a board regular called Norie;
The code is;
Code:
Private Sub Workbook_BeforeClose(Cancel As Boolean)
If ActiveSheet.Name "ThankYou" Then
Worksheets("ThankYou").Visible = xlSheetVisible
Application.Goto Worksheets("ThankYou").Range("A1"), True
Cancel = True
UserForm1.Show
[code]....
When I open the workbook it shows for about 1 second another sheet in the workbook rather than just instantly showing the "START" tab.
Is there any way to get over this to make this code 100% perfect?
I just really would love upon opening this workbook for the sheet that 1st comes into view to be the START SCREEN TAB, without any flash preview of another sheet.
I have attached a spreadsheet with a simple macro. How do i make the macro automatically run when the file is opened.
View 2 Replies View RelatedI wrote code for a few macros in a "save as" or practice version of a spreadsheet. Once I got the bugs worked out on the practice book I pasted the code into the actual spreadsheet I want to use. The problem is that whenever I run one of the macros it opens the practice book that I was using when I wrote the code. There should be no need for this and I can't figure out why that's happening. The code doesn't mention any workbook by name so I don't know why it would want to open the practice book.
View 4 Replies View RelatedI have a problem, where every time I close or open any workbook, Excel prompts me to "Enable or Disable Macros" in one particular workbook, wether I have tried to open it or not. In the said workbook, I have a macro that automatically updates a pivot table upon selecting the worksheet where the pivot table resides.
The code for it is as follows:
Sub UpdateIt()
Dim iP As Integer
Application.DisplayAlerts = False
For iP = 1 To ActiveSheet.PivotTables.Count
ActiveSheet.PivotTables(iP).RefreshTable
Next
Application.DisplayAlerts = True
End Sub
Private Sub Worksheet_Activate()
Call UpdateIt
End Sub
There is something in the code that calls UpdateIt any time a workbook is opened, closed or selected.
I would like to be able to automatically minimize the Excel 2007 ribbon on opening a particular workbook. My preference is to be able to apply that minimization to certain worksheets only, but if that's not possible then minimizing the ribbons on all sheets in the workbook will be ok.
Will I also need a BeforeClose code as well to reinstate the ribbon so that it is visible when opening subsequent workbooks?
I am trying to educate myself in the wonders of Excel (2003) and an struggling somewhat.I have a small project loosely based on a shops stock control and have attached a copy of the workbook -
The user normally only has access to columns B, C and E due to the others being locked and the sheet protected.I would like the sheet to be automatically sorted based on column E each time the workbook is opened.I then need to automatically delete a row once an item in column B has been removed (made blank)
I'm developing a workbook containing 121 sheets. Sheet 1 is effectively an index, and uses 120 form control checkboxes to unhide and display the selected sheets individually.
The code I'm using for each checkbox is below and is in a module.
I have 3 sheets: 1: master entry sheet that fills data in 5 different excel docs. Then there is another doc that aggregates data from the 5 and presents totals on the data. I am trying to get the end result without having to have 7 different excel files open, but when I enter into the master entry sheet, the data doesn't seem to be "pushed" up to the 5 different docs until each one is opened up. Obviously, the master aggregator is not updated since the 5 don't have the new data. When the files are all opened at the same time, the data flows perfectly, I'm just trying to find a way to avoid having to open the 5 docs in the middle of the process.
View 9 Replies View RelatedI have a need to open a file from my companies intranet. My current method was to open said file via the method that the recorder gave me. However, I would like ot be able to open a said file without having to start open another workbook.
This is the path:
[url]
So the command is this:
Workbooks.Open [url]
Links are not actual links
So what I need to know. Is how can I open this file without opening a workbook. I haven't been able to use the VB "Open Statement" to open a file and I don't believe that I've been successfull using the Filesystem object either.
I need a macro to open when opening an excel workbook. Viz: When a workbook is opened I would like it to immediately display an 'info/warning' box with some basic advice on how to operate the sheets, once read click yes (continue) and do what is required.
View 4 Replies View RelatedI want that when i open the workbook i created, it will display a text that seems to look or has an effect that looks like the excel type itself that words on the spreadsheet..Example the text will display in cell D10... i hope i am clear enough... this is the text i want to display upon opening... "THE PROGRAM YOU ARE USING IS UNDER THE LICENSED OF VTA STRUCTURAL COMPANY, THEREFORE ANY ILLEGAL PRODUCTION IS PROHIBITED".
View 9 Replies View RelatedI am using the below code (i have combined different bits of code which i found on these forums) to open a new workbook, copy all the data in it and paste it into Sheet2 in the active workbook . Also, i want the data to be pasted on the next empty row as there is already data in Sheet2. The data that is being copied and pasted has the same format and it is going to be repeated many times.
The problem i am having is that it is not offsetting the data to the next empty row - i think it is a simple change but i can't seem to get there :s
Also, the code is currently selecting all of the data from the workbook that i open - is there a way i can select all of the data, excluding the first row (the first row contains the headings which i already have in Sheet2 in the active workbook).
[Code].....
I have created userform and it works fine. Following code assigned to 'SUBMIT' button in userform - works fine. I am trying to include code where certain data from userform is also copied to workbook2 ( of course without opening it)- as marked in red...below
[Code].....
I need a little assistance opening a Word file via an Excel macro. The two files are linked and upon opening, the Word file asks if the links should be updated. I need this to automatically be "Yes" everytime the file is opened.
View 4 Replies View RelatedI use various spreadsheets which use the EOmonth function. The reason for this is that I have a variable start month and then move out for a set period and this is a very easy way of doing this. My only problem is that you have to have the Analysis ToolPak add-in selected, so when you send to other people, it doesn't work. I have use a bit of code to turn this on, but if the disable macros is selected than this doesn't work.
View 2 Replies View RelatedI'm working on a macro for work. It's a simple workbook with about 10 tabs. I would like for the user to open up the workbook but it not have the prompt foir enabling or disabling macros. Just on this one sheet, not other macros on other sheets.
Can I search a document without opening it?
If not how do I open a file if not already opened without using "ON ERROR"
I am trying to make one of my macros open a file then switch back to the orignal file and then running the macro.
here is my
I have a spreadsheet that data gets exported to from a software program. There is information such as customer name, part number, inquiry number, etc that I'd like to use to develop a log of all my estimates I create for parts. I'd like excel to take the cells I select and insert them into certain cells in the other workbook and automatically save that workbook. This will create a log of all my estimates where I can then link the full estimate to the log. The information will have to go in the next available row. Is there any way I can accomplish this without having to open the other workbook and save the work book each time?
View 1 Replies View Relatedhow to prevent a workbook from opening if another excel document is open and if a visual basic window is opened.
View 8 Replies View RelatedOn right clicking a closed file and if print is clicked, it is opening the file and printing the activesheet only and then closing the file. I want that it should print all the sheets continously and not only the Active sheet. How ths can be done?
View 9 Replies View RelatedI am designing a userform with a set of option buttons and a few corresponding combo boxes, which allow to view a ready-made report in excel. My problem is, how do I get the code to open the report I want? So far, the code looks like this:
Private Sub cmdshowreport_click()
frmmeipdashboard.Hide
If optcomm = True Then
If opttrd = True Then
ActiveWorkbook. Sheets(cbotrd).Activate
End Sub
cmd is the command button that I press when I want to view the report, opt is the radio butons, cbo the combo boxes. What is going on is you enable one button, then another, then choose a value from the combo box, and what I want is for the value in the combo box to be the value the code uses when choosing which sheet to activate.
is it possible to have a sheet that i can type in formulae and the formulae will automatically copy itself into the same cells on any new sheets i open?
View 13 Replies View RelatedI have 25 sheets in the workbook and a combobox on the main page, The combobox references a range of 1-25 that represents the 25 hidden pages. right now i can get the sheets to unhide one at a time based on the selection e.g. combobox option 1 will unhide sheet 1 but the sheet are representing sites in a design so i need to have the option to select multiple sites in the combobox option so for example if i select 5 then sheets 1-5 should unhide. I hope I've explained that clearly.
The other question or option would be to just duplicate sheet 1 based on the combobox selection e.g. selection 5 duplicates sheet 1 5 times.
I have just added some code to make my workbook close after it has been inactive for 5 minutes...this works fine except it opens itself up again after 5 minutes. If I select 'Enable Macros' it closes immediately and if not, it will stay open.
Here is all of the code I put in for the auto shut down:
ThisWorkbook:
[Code]....
Module 1
[Code] ....
I currently have a workbook that, when opened, automatically kicks off a macro (with a call from the Workbook_Open event in ThisWorkbook). I was to run that same called macro from a custom button that I put on a toolbar in Excel itself...which is pretty straight forward. However, when I do this, the macro kicks off twice...once from the button and once because the called macro's workbook opens and kicks off the macro with the Workbook_Open event.
So, what I was thinking was...is there a way to tell if a workbook is being opened by another workbook (by calling it's macro) or whether is was opened "normally (manually)"?
My friend emailed me a workbook. When she or I open the workbook, it opens two instances of it. Is there an option in excel that is causing it to do this? I need to send this a client and I do not want this to happen on their side.
View 6 Replies View RelatedI have a workbook that consists of 3 sheets, it's a template I use. Once I am done filling out sheet 3, I save as a new workbook. When I have to go back to the template workbook it always opens on sheet 3. Is there anyway that once I open the template workbook it will open on sheet 1?
View 1 Replies View RelatedI have created an Add-in for use across the business, the add in calculates financial impact based on figures that are stored on the shared drive.
The addin currently opens the workbook, and sets the variables to figures contained in the workbook - and then closes the workbook.
To roll this out to the business - I need to get the add-in to open the workbook as read Only, so that it will allow multiple users to access at once. I have set to open as read only in the past - however this prompts me to save the workbook as something else.
Is there any way I can get this to just open as read only, do what it needs to - and then close; without having the option to save as something else?