Autonumber/transfer Of Data To Other Sheet

Apr 5, 2007

i am trying to create a macro button that will take a new customer on the first page and transfer this new customer entry on to the existing customer page. i know i need to use a paste special to make the customer data to go from virtical to horizontal, but my main problem is that i need to give all my customers a autonumber with letters and numbers.

This is my problem i need to create a macro that will keep createing my format of CID1101,CID1102,CID1103 and so on and so forth as a autonumber and also be able to send my customer data across from the new customer table to the existing customer table. i have attached my spreadsheet i have had to zip it to get the size down and also remove pictures.

View 6 Replies


ADVERTISEMENT

Entering Data Onto Main Sheet That Automatically Transfer To Specific Sheet?

Feb 9, 2014

I remember years ago that I made a couple formulas that on sheet one would transfer to another sheet when I enter in sheet one.

View 5 Replies View Related

Macro To Transfer Data From Sheet 1 To First Available Empty Row On Sheet 2

Jun 25, 2012

I am looking for a Macro which can transfer data from sheet 1 to the first available empty row on sheet 2.

For example, I have data in the following cells on sheet 1: B2, B4, B6, B8, and B10. I want to transfer this data to the first available empty row into cells A1, B1, C1, D1 and E1 of sheet 2. The cell number is ofcourse depending on the first available empty row and could thus be 2, 3, 4, 5 etc.

I also want to delete the data from the original cells in sheet 1 after the data has been transferred.

View 8 Replies View Related

Transfer Data From 1 Sheet To Another

Mar 26, 2014

i need the data from columns D & E on the JOKE sheet to be transferred to columns F & G on the sheet called MY PRODUCTS...

you will see that the products may have slightly different names but the product codes (column C on the joke file and column E on the my products file) are always the same.

i want to just click a button and add the data from sheet 2 tab to the columns on sheet 1 tab.

my products.csv
joke.csv

View 1 Replies View Related

Transfer The Data From One Sheet To Another

Oct 29, 2008

I'm trying to get my code to search through some information and transfer the data from one sheet to another. Trying to find out why my code isn't working. I keep getting errors...

Here is the code I am having trouble with...

View 7 Replies View Related

Transfer Different Data From One Sheet To Another..

Apr 11, 2009

I have two worksheets one that has a weekly schedule and sheet2 (daily attendance) where i want to transfer One day at a time but i only need the Job role,employee name and shift for that day, then i need to do the same for each day but i don't want seven sheets. please find attached an example sheet.

View 2 Replies View Related

Transfer Data From One Sheet To Another

Nov 9, 2006

I have a button on one sheet of my file which should, when clicked, transfer the data in two separate columns to a particular column on another sheet. Until recently this has worked without problem - now however whenever the button is clicked nothing at all happens - this code was written for me, I don't know VBA at all. I attach the code here firstly to see if anyone can see that the problem may exist within it, although there do not appear to be any error messages or highlights:

Private Sub cmdTournament_Click()
Dim s As Range, i As Variant, t As Range, w As Range, _
cc As Range, c As Range, w2 As Range, j As Integer, Val As Integer
Val = Sheet3.Range("Tournament").Value
Set s = Sheet4.Range("Scores")
Set t = Sheet3.Range("Table")
Set w = t.Cells(1, 1).End(xlToRight).Offset(0, 1) 'first empty week
Set w2 = t.Cells(1, 1).Offset(0, 31).End(xlToRight).Offset(0, Val)
Application.Calculation = xlManual 'turn off calculations
For Each cc In s
For j = -1 To 4 Step 5
Set c = cc.Offset(0, j)....................

View 4 Replies View Related

Macro To Transfer Data From 1 Sheet To Another

Jul 10, 2009

I am wanting to create a spreadsheet for my stationary orders with some macro's and I have no idea on how to set this up. All the product information will be in Sheet 1 and the Order Form will be in Sheet 2 of the document.

In "sheet 1" we will make a list of all items that get ordered on a regular basis. This can be up to 500 items but
I have given you an example of 6 to play with.

We need the "QTY", "Unit Price" & "Total" in both "Sheet 1" and "Sheet 2" to sum up with a formula

Once the user has chosen the line item they will click on the "add" button next to the line item.

This will inturn take that particular line item and insert only the "Code", "Product", "Unit Price" & "Total" columns in "Sheet 2"
and leaving out the "Page Number", "Item Number" & "Description" & "QTY" fields to Sheet 2 (Order Form)
The user will manually change the "QTY" field on the "Sheet 2" (Order Form)

When the user selects another product and clicks "add" then this new line item will be added below the first line item
on Sheet2 (Order form) and so on.

We will probably only be ordering 10 - 50 items each time so we wont need a huge list on the order form (Sheet 2)

View 9 Replies View Related

Transfer Data From One Sheet To Another With Formula

Dec 27, 2008

I have 2 different sheets one is my check book register and the other is a summary page. Both have different categories for example [sheet 1 "register" (gasoline = A) (food = F)] [sheet 2 "summary" (Auto = A)

I think this is how I want it but I need this to work no matter what category my debit or credit falls in. If date is "January" and category is "A" then copy "debit" to sheet 2 under January Auto. then sub total all as designated on second sheet.

If date is January and category is "m" then copy debit to sheet 2 under January mortgage, then subtotal as designated on second sheet. I have attached an example of my spreed-sheet so far as you can see I am struggling getting the amounts to go into the correct categories. Also sometimes there may be more than one of the same type of transaction in the same month they need to be able to go into the same cell and be totaled as well.

View 2 Replies View Related

Transfer Graphic Data To Another Sheet

Nov 25, 2013

I got one excel document with a graphic that i want to be seen on a other excel document. But the data on that graphic must be able to mutate with the original excel document. It is just to function as a dashboard. How can i fix that.

View 1 Replies View Related

Excel Formula To Transfer Data From One Sheet To Another

Dec 6, 2013

I would like to transfer data from one sheet to another with the following caiteria.

Sheet 1
Id Item
1 a
1 b
2 c
3 d
1 e
2 f

Out put sheet want:
1 a b e
2 c f
3 d

What is the way to do this. What formula I can use here.

View 7 Replies View Related

Transfer Data From One Sheet To Another With Different Format And Formatting

Sep 12, 2013

create a fixture list from data i have in 2 other worksheets,Fixture Generator and Results.I was thinking the results page would be better to get the info from as it is already filtered (if 16 teams, 8 rows + 2 headers, if 9 teams, 5 rows + 2 headers etc.)The thing is, the filter has it listed in a column.

How would i get the info, conditionally, to enter into the fixtures sheet so that week 1 would be to the left, then week 2 to the right of that, up until week 4, then start a new row of fixtures until it is complete. Possibly having a gap between the first half and the second half ?

View 2 Replies View Related

Transfer Data From Form To Next Sheet In NEXT AVAILABLE COLUMN

May 5, 2014

I've run into an issue working on a small project.

The project:

A workbook in which sheet 1 is a form for people to input into 2 adjacent columns time spent on different tasks at the end of each work week. Sheet 2 is identical to sheet 1, but has the intended purpose of storing the data input into the form in sheet 1.

There is a button at the bottom of the form in sheet 1 with an assigned macro that effectively transfers all the data to sheet 2 and then clears sheet 1 for another entry.

The issue:

I cannot get the data to transfer to the next available set of 2 adjacent columns in sheet 2. It keeps repopulating the first 2 columns.

modifying the macro to transfer data to the next available set of 2 columns on sheet 2

View 7 Replies View Related

Auto Transfer Of Data / Text From One Sheet To Another?

Jan 30, 2014

I have a sheet which is list of prizes. Column B represents the type of auction this could go to Column C represents the type of prize and Column D the name of the person responsible. The other 4 sheets is for the live auction, the silent auction, the raffle and goodies prizes

If on sheet 1 the type of auction is SA, I'd like Column B, C and D to be reflected in the Silent auction sheet (List SA)

If on sheet 1 the type of auction is LA, I'd like Column B, C and D to be reflected in the Live auction sheet (List LA) and same for Raffle (R) and Goodies (GB)

View 3 Replies View Related

Macro To Transfer Data From One Sheet To Another In Same Workbook

Jan 9, 2013

I am now on my third attempt to perform a fairly basic task of transferring data keyed to a separate log. I originally started with a user form transferring to a separate work book however this was not practical. I then had a values keyed into a worksheet being transferred to a separate workbook however network issues mean this data keeps being lost.

I am now trying to simply transfer data keyed in one worksheet to the next available line in a different worksheet in the same workbook.

Here is my code that I have chopped and mashed together from my previous versions.

The sheet the data is be keyed into is called Key and the sheet where the data is to be sent is called log. I would also like the values in the Key sheet to cleared once transferred:

Dim iRow As Long
Dim ws As Worksheet
Set ws = Worksheets("Log")
iRow = ws.Cells.Find(What:="*", SearchOrder:=xlRows, _
SearchDirection:=xlPrevious, LookIn:=xlValues).Row + 1
ws.Cells(iRow, 1).Value = Key.Range("E7")
Key.Range("e7").Value=""""
End Sub

View 9 Replies View Related

How To Transfer Entries From Master Data Sheet To Sub Sheets

Jun 2, 2014

I have a database with all employees in a worksheet. Employees are from eight different divisions (marked with acronym in column C). I have eight additional worksheets - one for each division (names of worksheets will be the same to the entries in column C in master sheet).

I want the information of employees (the whole row) to be transfered to the sheet of their respective division. So, whenever I make a change in the master sheet, the change is effective in division's sheet as well. And if I add an employee to the master sheet, they will be automatically added to the division's sheet.

View 4 Replies View Related

Time Management Sheet - Transfer Raw Data Into Table

Oct 25, 2012

On a daily basis we have to manually fill in a time sheet, and I was trying to think of a way where I could just copy and paste it into excel and it would show me on another sheet the total amount of hours I have worked over the month. This gets slightly more difficult, as different clients have different campaigns, and you can work on any variety during the day (however, not all of them do).

Typical raw data looks like this:

Client
Hours
Campaign

Rubber gloves
4.1
SEO

[Code] ....

Therefore I would like to combine the data and then send it off to another report that looks like this:

Rubber gloves - SEO
Rubber Gloves - PR
Bottled Water

1/12/12
4.1
2.3
2.8

[Code] .......

This would allow me to keep a check of how many hours I am working on each campaign over the month, and ensure that I don't run over on time. I have the boxes prepared for the 2/12/12, 3/12/12, etc. where I paste the raw data, and let excel break it down and put it in the report automatically.

I have been entering the data manually so far and I'd quite like to avoid a pivot table or chart (but i am open to it).

View 3 Replies View Related

Transfer Data From Sheet Two Into Sheet 1

Sep 1, 2009

I have two sheets in excel workbook. Sheet2 has a list of number in col A and the corresponding data in col B C D E F. In sheet one, I want to type a number that exist in col A of sheet 2 and it automatically populate the correspond data in col B C D E F from sheet2 into sheet1.

View 10 Replies View Related

Excel 2010 :: Automatically Transfer Data From Master Sheet To Others

Apr 26, 2012

I work for an insulation company and we have all of our jobs, completed and in progress, on a master worksheet.

Currently there are 437 rows of data (but will increase), and columns A to N with various bits of data.

Row A is a location field - there are 5 locations currently.

I would like to be able to add a new line at the bottom of the master sheet, and then this automatically identifies the location from column A and which worksheet is it to be copied to and then copies the data from that new row to the bottom of the relevant location sheet.

I would also like to be able to update the data in the existing entries (e.g. when a job has been assessed initially, and then completed, I need to put the dates in) and for this to update on the relevant worksheet.

Each worksheet has the same format (columns A to N have the same headings in row 1, then data to begin in row 2).

I wouldn't say I'm an advanced Excel user (otherwise I wouldn't be asking this question), but I do have a fairly good working knowledge of it. Currently using Excel 2010. Would ideally like to be able to do it without VBA as it needs to be uploaded to Google Docs and for others in the company to access online.

View 9 Replies View Related

Transfer The Data In Those 5 Fields To 5 Specific Cells In A Hidden Sheet

Apr 3, 2009

I am trying to figure out how to do the coding for a command button in a userform I've created. It has 5 textbox fields. I want the command button when clicked to transfer the data in those 5 fields to 5 specific cells in a hidden sheet. Then I also want that button to launch a word document.

Anyone know how I can go about this or where I can go that explains the specific coding?

I've tried searching with mixed confusing results & read through http://www.contextures.com/xlUserForm01.html#Top & http://www.theofficeexperts.com/down...ExcelDownloads examples.

View 7 Replies View Related

Macro To Transfer Data From One Sheet To Another Based On Date And Reset Fields

Jul 16, 2014

I am currently working on a workbook to have employees fill in data on what tasks they compelted for the day, and how long it took. There are 5 colums (for this purpose) Task, Description, Time, Required to complete, Completed. The tasks are predefined and listed out in each row. There is also a space for employees to select the date they are entering the data for.

I would like to have a macro that is linked to a submit button and when pressed populates this data into a database on another sheet. This database is split into two sheets (1 with time and one with tasks required/compelted). Each sheet has the list of tasks going down a cloum on the left, and dates along a row on the top. When the employee presses submit I would like this data to popuplate in the coresponding date and task fields and then reset the form on sheet 1 to all 0's.

View 1 Replies View Related

Macro To Transfer All Data From One Workbook To Specific Sheet In Another Workbook

Feb 23, 2014

I have data in 2 different workbooks, and I need to transfer all data in 'Jx_ex1' to sheet1 in the 'template' workbook, and all data in 'Gr_ex1' to sheet2 in 'template' workbook. All data should be transferred to the same cell numbers, from A1 to Y5000. I actually have loads of workbooks to transfer to the template but if I have an example with the two then im sure I can work out how to modify it. All files will be in the same folder.

View 8 Replies View Related

AutoNumber Like 1F, 2F, 3F

Oct 9, 2008

Here is what I am trying to do. I want to autonumber like this

1F
2F
3F...

ALSO
JPG1F1
JPG2F1
JPG3F1...

Is there a way to do this.

View 4 Replies View Related

Autonumber Function

Mar 14, 2007

I am creating a quotation system, where each quotation created needs a unique quotation number. The first quotation created will be put into row A8 and will be No1, when a new quotation is created and therefore a new A8 inserted, i want the number 2 put in and on the next inserted line no3 and so on.

Is there a function to do this?

View 9 Replies View Related

Autonumber, Add Row, Sort

Aug 16, 2006

I am trying to write a macro that copies 2 columns from page2 (column a & b) and paste it into sheet1 (column B & C), deletes the info from sheet2 so it is always available for the next info to cut and paste, in sheet1 column A I have 1,2,3,4,5 so I would like that the macro adds the next number down where the info will be pasted, I know it is an easy one, but I am going in circles,

View 9 Replies View Related

Line On Sales Tracking Sheet To To Transfer To Sheet 3 Automatically

Mar 20, 2014

Once a job is complete on a sales tracking sheet I created, it needs to transfer automatically once I click on a "completed" section of my work sheet.

View 1 Replies View Related

Copy Cells From A Sheet And Transfer Only The Values To Other Sheet?

Feb 20, 2014

I'm trying to copy the cells from a sheet and transfer only the values to other sheet.

I did it via code and it worked fine, except for the dates. In the new sheet the months and days are swapped.

The original date is composed via the concatenate function, since it gets inputs (day, month and year) from the user in different cells. It's in the format D/M/YYYY (examples: 4/2/2014, 10/12/2013). I believe the excel interprets it as Text, even if I formated the cells to Date.

I think it may have something to do with the default format in different countries. Here in Brazil we use DD/MM/YYYY, but my Excel is in english and in US the format is MM/DD/YYYY, am I right?

View 2 Replies View Related

Autonumber While Skipping Rows?

Dec 21, 2012

I am trying to get excel to autocount starting in a7 and ending at a600, skipping 3 rows in between, and only gng from 1-10 then repeating and inserting a page break after the 10th line i have put an example in.

SAMPLE1.xlsx

View 11 Replies View Related

Autonumber Based On Criteria -

May 17, 2007

I'm trying to think of how to create a code that would autonumber based on criteria. I am trying to autonumber a type of invoice for an estimate.

1) Use the initials of the person creating the at the beginning of the number - we have 4 users of the form.

2) The form is an original and once completed it would be saved as an alternate file - maintaining the blank original.

3) Would it be possible to keep a running list (on a hidden sheet) so that the autonumber knows what number to use next.

I was thinkiing that it could be generated at the press of a button, since these estimates would be looked at again and again. I wouldn't want it renumbering everytime the workbook is opened.

View 8 Replies View Related

Autonumber/highlight Stock Levels

Apr 9, 2007

to create an order ID so when customer is transferred from the new order to Existing orders it will automatically generate CUW001 for first order then CUW002 for the second order and so on I have added a column form Order ID so this may have affected the macros pasting location. Also one last thing could you also tell me how I could highlight stock items red if the stock levels fall below 5

i have attached the spreadsheet

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved