Excel 2010 :: Automatically Transfer Data From Master Sheet To Others
Apr 26, 2012
I work for an insulation company and we have all of our jobs, completed and in progress, on a master worksheet.
Currently there are 437 rows of data (but will increase), and columns A to N with various bits of data.
Row A is a location field - there are 5 locations currently.
I would like to be able to add a new line at the bottom of the master sheet, and then this automatically identifies the location from column A and which worksheet is it to be copied to and then copies the data from that new row to the bottom of the relevant location sheet.
I would also like to be able to update the data in the existing entries (e.g. when a job has been assessed initially, and then completed, I need to put the dates in) and for this to update on the relevant worksheet.
Each worksheet has the same format (columns A to N have the same headings in row 1, then data to begin in row 2).
I wouldn't say I'm an advanced Excel user (otherwise I wouldn't be asking this question), but I do have a fairly good working knowledge of it. Currently using Excel 2010. Would ideally like to be able to do it without VBA as it needs to be uploaded to Google Docs and for others in the company to access online.
View 9 Replies
ADVERTISEMENT
May 28, 2014
I am trying to automatically transfer data from nonadjacent cells (C1, B5,B10,B16,B22,B28) from multiple workbooks in a masterworkbook folder from A2:F2. I am a novice at VBA. I am not able to copy as Range("C1,B5,B10,B16,B22,B28") and the way it currently is coded only the last copied range (B28) is pasted to the master workbook. The data pastes to A2 in the master workbook instead of F2 where I want it. I need copying the cells from the workbooks into row 2 in the master bookbook. Here is what I currently have:
Sub LoopThroughDirectory()
Dim MyFile As String
Dim erow
MyFile = Dir("C:ToolFolderWorkObjectives")
[Code].....
View 9 Replies
View Related
Jun 2, 2014
I have a database with all employees in a worksheet. Employees are from eight different divisions (marked with acronym in column C). I have eight additional worksheets - one for each division (names of worksheets will be the same to the entries in column C in master sheet).
I want the information of employees (the whole row) to be transfered to the sheet of their respective division. So, whenever I make a change in the master sheet, the change is effective in division's sheet as well. And if I add an employee to the master sheet, they will be automatically added to the division's sheet.
View 4 Replies
View Related
Feb 9, 2014
I remember years ago that I made a couple formulas that on sheet one would transfer to another sheet when I enter in sheet one.
View 5 Replies
View Related
May 16, 2014
So, I'm setting up an accounting book. There's a master sheet that needs to pull from the other sheets that are made. The problem is, with each new sheet that is made, I have to update the formulas on the master. I would like that if I made a new sheet, the master would automatically pull from it.
Example:
Master pulls renter fee info from May 3rd, May 7th
I create sheet (May 15th)
Master pulls renter info from May 3rd, May 7th, May 15th
View 1 Replies
View Related
Aug 24, 2013
I currently have an excel work book with multiple sheets per year. What I want to happen is that whenever I input data in one of the Year sheets, it will automatically go to the Master sheet.
See attached file for sample
Sample.xlsx
View 8 Replies
View Related
Jul 9, 2012
I got a master format in xl2010 to collect data, which is being circulated between my team. members fill in their respective data n mail back the file with their name attached to file name. i want to creat a macro which can copy the data from every members file to master file.
View 1 Replies
View Related
Mar 27, 2014
Every day I receive a csv file of NAMES, PLACES, ADDRESSES, IDS, SPECIAL ID (ETID), ITEMS, QUANTITY, AND OTHER INANE INFORMATION. which is a list of people from places that are ordering item(s) for each ETID)
I CONVERT TO EXCEL BECAUSE I HAVE TO CLEAN THE DATA FORMATTING, AND SPLIT A COLUMN INTO 2 (LAST NAME AND ETID ARE TOGETHER).
I need to put the items into a form, one order per ETID.
I tend to receive on NAME, PLACE, ADDRESS, sending orders for multiple ETIDS.
I don't know the easiest or best way to get the info into the order form. I have designed the form in word and excel.
View 1 Replies
View Related
Feb 16, 2012
We have a master worksheet, and I cant let staff see it, but I want them to update 'their bits' themselves, rather than email the admin staff and let them update the master sheet..
every job is on its own row and contains a unique ID.
is there a way i can merge their data in to the correct row and column(s) on the master sheet?
i've been playing with datasources etc
Excel 2010
View 2 Replies
View Related
Mar 1, 2014
In this attached example, this is a portion of a actual work procedure. The yellow highlighted cells are the same work element within the master procedure but one is for one type of machine while the other is for same model but added options. This is a pattern throughout the entire worksheet. Basically 1 model with several different types of options. I don't want to have unnecessary elements in a work procedure.
So what I am trying to accomplish, I want to create a userform or dashboard which will allow selection of model #, model type #, then based off those selections have excel populate a worksheet with all correct procedures based off model type choice.
In this example there is 6 model variations, all share same basic procedure, but all have their own work procedure based on options, so my above approach will allow me to make changes to the master procedure only instead of changing 6 procedures.
View 6 Replies
View Related
Dec 6, 2013
I would like to transfer data from one sheet to another with the following caiteria.
Sheet 1
Id Item
1 a
1 b
2 c
3 d
1 e
2 f
Out put sheet want:
1 a b e
2 c f
3 d
What is the way to do this. What formula I can use here.
View 7 Replies
View Related
Oct 9, 2012
I have a large data ... my problem is that I want the data is segregated automatically without manual filtering. in my data there are approximately 1000 individual name data, i need information about one person automatically segregated in one worksheet
A
B
C
D
[Code]....
for example; in the table we can see the red colour font in column D, that is the name person, what i want is data for one person automatically transfer to another sheet..example : Annamalai data to Sheet2, Koh Che Kuan to Sheet 3, Rashidah to Sheet 4..etc
View 3 Replies
View Related
Mar 20, 2014
Once a job is complete on a sales tracking sheet I created, it needs to transfer automatically once I click on a "completed" section of my work sheet.
View 1 Replies
View Related
Nov 3, 2013
I am working on Excel 2010. I want to find a way to link data from one spreadsheet to another one and whenever I update the first spreadsheet, the second one will be automatically updated?
View 2 Replies
View Related
Apr 16, 2014
I have created timesheets for employees that work in our shop. Our company manufactures products for different industries, such as mining, wind power generation, general industrial applications, and so forth. I modified some time sheet templates I found for excel to accommodate our company's actions. Each employee has their own workbook, in which the months are separated into different worksheets. Each sheet is divided further into weeks and in each weekly section the areas of information are divided as follows:
A / B / C / D / E / F / G / H / I / J / K / L / M
Work Sector / Workshop or Fieldservice / Scope of Work / Job # / Reg or OT / Mon / Tue / Wed / Thu / Fri / Sat / Sun / Total
There are 7 workbooks (one for each employee), each with 12 sheets (one for each month). I want to create a master sheet that will pull information from everyone's timesheet if they worked on a particular job. In other words, I would like to type a job number into a cell, then have excel look through everyone's timesheets and pull over only the rows of information that contain that job number
View 12 Replies
View Related
Sep 4, 2008
i need a little help. I have a workbook with 2 sheets. I need rows to transfer to the first sheet automatcily if the record dose not already exsist on the first sheet based on if a vaule in a certin cell is below a certin number.
View 9 Replies
View Related
Apr 25, 2013
I have a workbook with 8 tabs and one master tab. The 8 tabs are where the user enters information and the master sheet contains all employees from the 8 tabs. All tabs, including the master, have the same columns in the same order. How can I automatically have the information populate to the master tab as information is changed on the tab groups? I had a vlookup on the master sheet going through all of the sheets however it slowed my report down tremendously and caused too much lag.
View 2 Replies
View Related
Mar 27, 2009
i'm have a master spreadsheet of contact details and categories. i want to be able to pull contact information onto other sheets within the same workbook, based on category. example attached.
View 5 Replies
View Related
Jul 23, 2012
I have 2 workbooks in Excel 2010, each contain just 1 sheet. (see attached) I need to compare on sheet 1, cell D1 and column A:A (this column will be much longer), with the data in columns C:C & A:A on sheet 2, if a corresponding match is found, the data contained in column D on the same row on sheet 2 is written to the cell with the matching data in sheet 1.
My attempt is in cell D2 on sheet1.
View 5 Replies
View Related
Jul 4, 2014
If a certain email comes into a mailbox with certain parameters eg subject and from criteria is met. Then extract the data from the email attachment (daily order) and add it to a master sheet containing all orders.
View 1 Replies
View Related
Nov 28, 2006
I'm trying to figure out how to create a database on Sheet 2 by filling in the info in a template created on Sheet 1. I have seen it done with the addition of a button within the Excel sheet itself, and you simply click it to send your information to the database page. I am thinking it is along the lines of OLAP or recording macros
View 8 Replies
View Related
Dec 9, 2011
I am trying to create a UserForm in Excel 2010 that will look for a part from our database (or on a specific Sheet, possibly a hidden sheet), then add specific data from that part's row into a new line.
More Specifically:
| Part # | Description | Category | SubCategory | Cost | Labor Hours | Weight | Etc |
I want to be able to input the Part #, and have it automatically add specified information to sheets 1 and 2 and those two differ. 1 is our Quote Sheet, and 2 is our bill of materials.
Also, I need each piece of information to go to a specific column (ex. Cost always goes to Column K)
What I have now is a broken UserForm that references a DOC file with a Table, but I need something a good but more complex.
Ideally, what I want is to have 4 ListBoxes where you choose Category --> SubCategory --> Make --> Model then have several CheckBoxes below that would determine whether to add a part (Cost, Labor, Weight).
The reason for this is because we have no need for the Cost or Labor Hours in our Bill of Materials, but need that information for our Quotes. And we generally don't need Specific Dimensions in our Quotes, but DO need them in the Bill of Materials...
Can I make it so that it will insert Pre-Specified information into both sheets at the same time?
View 1 Replies
View Related
Dec 7, 2012
I have a workbook with data on sheet1 and a summary on sheet 2. I want to use two drop down boxes on sheet 2 (B3 and B6) to look up matching data from sheet 2. What formula is best to enable these two look_up values to be used? I saw an example where the two values were separated by a comma within {} i.e. {B2,B6}, but only got an error when I entered the formula into my Excel 2010 sheet.
I have previously used VLOOKUP, but this comes back saying I have to many arguments. I can attach the workbook if that makes it easier to explain.
View 1 Replies
View Related
Jun 6, 2013
I'm using Excel 2010. I have a workbook that has six or seven worksheets in it. Each worksheet has a header row, and then lists of clients at the clinic where I work. The columns are last name, first name, medicaid #, social security #, DOB. We use these lists every month to verify that each client has Medicaid for the month. Therefore, there are also columns with names like April, May, June where we mark yes or no for each client. Some of the worksheets also have information about the clients' guardian, phone number, etc., but not every worksheet has those. (I can't show you the worksheets b/c of federal privacy laws, of course.)
I really, really want a worksheet that's a master list of the data from each of the existing worksheets, and I'd like to keep it synced to the source worksheets. I'd love it if I could also add a column telling me which of the source worksheets the data originally came from.
I've tried a few things to make it happen, but nothing has worked.
I've tried using the Consolidate function built into Excel as well, but that only works with numbers, not text, and it wants to manipulate the numbers instead of just copying them over.
I've found several macros online that should have worked (including one from this site) but that I wasn't able to install to my worksheet. I followed all the steps for installation, and throught it worked, but when I went back to the Excel file to run the macro, the list of available macros remained emptpy.
Is it possible that corporate IT has disabled the ability to install macros? Is there somewhere in Options were I need to go to turn Macros on?
View 5 Replies
View Related
Oct 26, 2011
How to fill a web form automatically with excel data. I need to sign up like 300 people on a site per day. Their detail are given to me in excel. How can I automatically fill the form with the excel data without spending time doing copy and paste for each person's data?
View 1 Replies
View Related
Aug 21, 2012
I have created a comparison sheet and compares my old one from last week to the new one I create for this week.
It populates cells with the differences and shows me the data from the new sheet. But since my they are so massive A5:AZ20,000 so you can imagine how many blanks there are.I want to create an auto summary or something from the non blanks.
Column A has each properties Unique Identifier And the rest is various info for the property. I would like it to return my unique ID and then the columns with new data that has showed up from the comparison some are text and some are numbers.
Also I am using Excel 2010.
View 9 Replies
View Related
Oct 7, 2009
I receive a monthly download of individuals call-logs in one "Master File." For internal reasons, I need to separate every person's monthly call-log into individual worksheets. Unfortunately, the file is very large and copy/paste is very time consuming. I am operating on MS Excel 2007.
View 9 Replies
View Related
Oct 4, 2013
I'm using Excel 2010 and I've got a chart on a worksheet and the worksheet needs to be protected. I'm able to manipulate the chart in any fashion EXCEPT the position of the Data Labels. Is this a bug in Excel 2010?
View 3 Replies
View Related
Mar 14, 2014
I have to input information into a master worksheet which contains data (employee names, location, start date and client) that then needs to be repeated in several other sheets. I want to input the data into a master worksheet and then automatically populate the other sheets with the data. If the data could then be filterable on each sheet that would be good.
View 9 Replies
View Related
May 9, 2014
So in my excel document I have it such that on the first sheet (Labeled 'Sorted') the data is set up as follows: LOCATION, EXTENSION, NAMEWith the appropriate data under each header. On the second sheet (Labeled 'Locations_Ext') I have a named range called Locations; it contains extensions from a separate document, names of people associated with the extensions from the document, and their locations on the map. I am trying to have it such that the excel matches the extension number given on the first sheet with the ones that I extracted from the document on the second and output the location into the first column on the first sheet. The code I have set up for that process is:
=VLOOKUP(B(//SomeValue),Locations,1,FALSE)
I then want the excel to cross check the information that I took from the Visio to see if the visio is up to date with the latest info we have received (Which is the data on the first page under Extension and Name). The code:
=IF(C(//SomeValue)=VLOOKUP(B(//SomeValue),Locations,3,False),"Good","Error")
Both codes seem to be giving me this: #N/A as the results for every cell.. I'm using MS 2010
View 2 Replies
View Related
