i need the data from columns D & E on the JOKE sheet to be transferred to columns F & G on the sheet called MY PRODUCTS...
you will see that the products may have slightly different names but the product codes (column C on the joke file and column E on the my products file) are always the same.
i want to just click a button and add the data from sheet 2 tab to the columns on sheet 1 tab.
my products.csv
joke.csv
I remember years ago that I made a couple formulas that on sheet one would transfer to another sheet when I enter in sheet one.
View 5 Replies View RelatedI am looking for a Macro which can transfer data from sheet 1 to the first available empty row on sheet 2.
For example, I have data in the following cells on sheet 1: B2, B4, B6, B8, and B10. I want to transfer this data to the first available empty row into cells A1, B1, C1, D1 and E1 of sheet 2. The cell number is ofcourse depending on the first available empty row and could thus be 2, 3, 4, 5 etc.
I also want to delete the data from the original cells in sheet 1 after the data has been transferred.
I'm trying to get my code to search through some information and transfer the data from one sheet to another. Trying to find out why my code isn't working. I keep getting errors...
Here is the code I am having trouble with...
I have two worksheets one that has a weekly schedule and sheet2 (daily attendance) where i want to transfer One day at a time but i only need the Job role,employee name and shift for that day, then i need to do the same for each day but i don't want seven sheets. please find attached an example sheet.
View 2 Replies View RelatedI have a button on one sheet of my file which should, when clicked, transfer the data in two separate columns to a particular column on another sheet. Until recently this has worked without problem - now however whenever the button is clicked nothing at all happens - this code was written for me, I don't know VBA at all. I attach the code here firstly to see if anyone can see that the problem may exist within it, although there do not appear to be any error messages or highlights:
Private Sub cmdTournament_Click()
Dim s As Range, i As Variant, t As Range, w As Range, _
cc As Range, c As Range, w2 As Range, j As Integer, Val As Integer
Val = Sheet3.Range("Tournament").Value
Set s = Sheet4.Range("Scores")
Set t = Sheet3.Range("Table")
Set w = t.Cells(1, 1).End(xlToRight).Offset(0, 1) 'first empty week
Set w2 = t.Cells(1, 1).Offset(0, 31).End(xlToRight).Offset(0, Val)
Application.Calculation = xlManual 'turn off calculations
For Each cc In s
For j = -1 To 4 Step 5
Set c = cc.Offset(0, j)....................
I am wanting to create a spreadsheet for my stationary orders with some macro's and I have no idea on how to set this up. All the product information will be in Sheet 1 and the Order Form will be in Sheet 2 of the document.
In "sheet 1" we will make a list of all items that get ordered on a regular basis. This can be up to 500 items but
I have given you an example of 6 to play with.
We need the "QTY", "Unit Price" & "Total" in both "Sheet 1" and "Sheet 2" to sum up with a formula
Once the user has chosen the line item they will click on the "add" button next to the line item.
This will inturn take that particular line item and insert only the "Code", "Product", "Unit Price" & "Total" columns in "Sheet 2"
and leaving out the "Page Number", "Item Number" & "Description" & "QTY" fields to Sheet 2 (Order Form)
The user will manually change the "QTY" field on the "Sheet 2" (Order Form)
When the user selects another product and clicks "add" then this new line item will be added below the first line item
on Sheet2 (Order form) and so on.
We will probably only be ordering 10 - 50 items each time so we wont need a huge list on the order form (Sheet 2)
I have 2 different sheets one is my check book register and the other is a summary page. Both have different categories for example [sheet 1 "register" (gasoline = A) (food = F)] [sheet 2 "summary" (Auto = A)
I think this is how I want it but I need this to work no matter what category my debit or credit falls in. If date is "January" and category is "A" then copy "debit" to sheet 2 under January Auto. then sub total all as designated on second sheet.
If date is January and category is "m" then copy debit to sheet 2 under January mortgage, then subtotal as designated on second sheet. I have attached an example of my spreed-sheet so far as you can see I am struggling getting the amounts to go into the correct categories. Also sometimes there may be more than one of the same type of transaction in the same month they need to be able to go into the same cell and be totaled as well.
I got one excel document with a graphic that i want to be seen on a other excel document. But the data on that graphic must be able to mutate with the original excel document. It is just to function as a dashboard. How can i fix that.
View 1 Replies View Relatedi am trying to create a macro button that will take a new customer on the first page and transfer this new customer entry on to the existing customer page. i know i need to use a paste special to make the customer data to go from virtical to horizontal, but my main problem is that i need to give all my customers a autonumber with letters and numbers.
This is my problem i need to create a macro that will keep createing my format of CID1101,CID1102,CID1103 and so on and so forth as a autonumber and also be able to send my customer data across from the new customer table to the existing customer table. i have attached my spreadsheet i have had to zip it to get the size down and also remove pictures.
I would like to transfer data from one sheet to another with the following caiteria.
Sheet 1
Id Item
1 a
1 b
2 c
3 d
1 e
2 f
Out put sheet want:
1 a b e
2 c f
3 d
What is the way to do this. What formula I can use here.
create a fixture list from data i have in 2 other worksheets,Fixture Generator and Results.I was thinking the results page would be better to get the info from as it is already filtered (if 16 teams, 8 rows + 2 headers, if 9 teams, 5 rows + 2 headers etc.)The thing is, the filter has it listed in a column.
How would i get the info, conditionally, to enter into the fixtures sheet so that week 1 would be to the left, then week 2 to the right of that, up until week 4, then start a new row of fixtures until it is complete. Possibly having a gap between the first half and the second half ?
I've run into an issue working on a small project.
The project:
A workbook in which sheet 1 is a form for people to input into 2 adjacent columns time spent on different tasks at the end of each work week. Sheet 2 is identical to sheet 1, but has the intended purpose of storing the data input into the form in sheet 1.
There is a button at the bottom of the form in sheet 1 with an assigned macro that effectively transfers all the data to sheet 2 and then clears sheet 1 for another entry.
The issue:
I cannot get the data to transfer to the next available set of 2 adjacent columns in sheet 2. It keeps repopulating the first 2 columns.
modifying the macro to transfer data to the next available set of 2 columns on sheet 2
I have a sheet which is list of prizes. Column B represents the type of auction this could go to Column C represents the type of prize and Column D the name of the person responsible. The other 4 sheets is for the live auction, the silent auction, the raffle and goodies prizes
If on sheet 1 the type of auction is SA, I'd like Column B, C and D to be reflected in the Silent auction sheet (List SA)
If on sheet 1 the type of auction is LA, I'd like Column B, C and D to be reflected in the Live auction sheet (List LA) and same for Raffle (R) and Goodies (GB)
I am now on my third attempt to perform a fairly basic task of transferring data keyed to a separate log. I originally started with a user form transferring to a separate work book however this was not practical. I then had a values keyed into a worksheet being transferred to a separate workbook however network issues mean this data keeps being lost.
I am now trying to simply transfer data keyed in one worksheet to the next available line in a different worksheet in the same workbook.
Here is my code that I have chopped and mashed together from my previous versions.
The sheet the data is be keyed into is called Key and the sheet where the data is to be sent is called log. I would also like the values in the Key sheet to cleared once transferred:
Dim iRow As Long
Dim ws As Worksheet
Set ws = Worksheets("Log")
iRow = ws.Cells.Find(What:="*", SearchOrder:=xlRows, _
SearchDirection:=xlPrevious, LookIn:=xlValues).Row + 1
ws.Cells(iRow, 1).Value = Key.Range("E7")
Key.Range("e7").Value=""""
End Sub
I have a database with all employees in a worksheet. Employees are from eight different divisions (marked with acronym in column C). I have eight additional worksheets - one for each division (names of worksheets will be the same to the entries in column C in master sheet).
I want the information of employees (the whole row) to be transfered to the sheet of their respective division. So, whenever I make a change in the master sheet, the change is effective in division's sheet as well. And if I add an employee to the master sheet, they will be automatically added to the division's sheet.
On a daily basis we have to manually fill in a time sheet, and I was trying to think of a way where I could just copy and paste it into excel and it would show me on another sheet the total amount of hours I have worked over the month. This gets slightly more difficult, as different clients have different campaigns, and you can work on any variety during the day (however, not all of them do).
Typical raw data looks like this:
Client
Hours
Campaign
Rubber gloves
4.1
SEO
[Code] ....
Therefore I would like to combine the data and then send it off to another report that looks like this:
Rubber gloves - SEO
Rubber Gloves - PR
Bottled Water
1/12/12
4.1
2.3
2.8
[Code] .......
This would allow me to keep a check of how many hours I am working on each campaign over the month, and ensure that I don't run over on time. I have the boxes prepared for the 2/12/12, 3/12/12, etc. where I paste the raw data, and let excel break it down and put it in the report automatically.
I have been entering the data manually so far and I'd quite like to avoid a pivot table or chart (but i am open to it).
I have two sheets in excel workbook. Sheet2 has a list of number in col A and the corresponding data in col B C D E F. In sheet one, I want to type a number that exist in col A of sheet 2 and it automatically populate the correspond data in col B C D E F from sheet2 into sheet1.
View 10 Replies View RelatedI work for an insulation company and we have all of our jobs, completed and in progress, on a master worksheet.
Currently there are 437 rows of data (but will increase), and columns A to N with various bits of data.
Row A is a location field - there are 5 locations currently.
I would like to be able to add a new line at the bottom of the master sheet, and then this automatically identifies the location from column A and which worksheet is it to be copied to and then copies the data from that new row to the bottom of the relevant location sheet.
I would also like to be able to update the data in the existing entries (e.g. when a job has been assessed initially, and then completed, I need to put the dates in) and for this to update on the relevant worksheet.
Each worksheet has the same format (columns A to N have the same headings in row 1, then data to begin in row 2).
I wouldn't say I'm an advanced Excel user (otherwise I wouldn't be asking this question), but I do have a fairly good working knowledge of it. Currently using Excel 2010. Would ideally like to be able to do it without VBA as it needs to be uploaded to Google Docs and for others in the company to access online.
I am trying to figure out how to do the coding for a command button in a userform I've created. It has 5 textbox fields. I want the command button when clicked to transfer the data in those 5 fields to 5 specific cells in a hidden sheet. Then I also want that button to launch a word document.
Anyone know how I can go about this or where I can go that explains the specific coding?
I've tried searching with mixed confusing results & read through http://www.contextures.com/xlUserForm01.html#Top & http://www.theofficeexperts.com/down...ExcelDownloads examples.
I am currently working on a workbook to have employees fill in data on what tasks they compelted for the day, and how long it took. There are 5 colums (for this purpose) Task, Description, Time, Required to complete, Completed. The tasks are predefined and listed out in each row. There is also a space for employees to select the date they are entering the data for.
I would like to have a macro that is linked to a submit button and when pressed populates this data into a database on another sheet. This database is split into two sheets (1 with time and one with tasks required/compelted). Each sheet has the list of tasks going down a cloum on the left, and dates along a row on the top. When the employee presses submit I would like this data to popuplate in the coresponding date and task fields and then reset the form on sheet 1 to all 0's.
I have data in 2 different workbooks, and I need to transfer all data in 'Jx_ex1' to sheet1 in the 'template' workbook, and all data in 'Gr_ex1' to sheet2 in 'template' workbook. All data should be transferred to the same cell numbers, from A1 to Y5000. I actually have loads of workbooks to transfer to the template but if I have an example with the two then im sure I can work out how to modify it. All files will be in the same folder.
View 8 Replies View RelatedOnce a job is complete on a sales tracking sheet I created, it needs to transfer automatically once I click on a "completed" section of my work sheet.
View 1 Replies View RelatedI'm trying to copy the cells from a sheet and transfer only the values to other sheet.
I did it via code and it worked fine, except for the dates. In the new sheet the months and days are swapped.
The original date is composed via the concatenate function, since it gets inputs (day, month and year) from the user in different cells. It's in the format D/M/YYYY (examples: 4/2/2014, 10/12/2013). I believe the excel interprets it as Text, even if I formated the cells to Date.
I think it may have something to do with the default format in different countries. Here in Brazil we use DD/MM/YYYY, but my Excel is in english and in US the format is MM/DD/YYYY, am I right?
I am trying to create a transfer of data from one worksheet to another, where Column G is where new data will be entered. I have a macro to sort the data (works great!!), but it is just getting it from one worksheet to another without having formulas in the cells - which can be deleted by my co-workers - to pull the data from one sheet to another.
I do not know if this can be done automatically or not, or if info is updated on one worksheet vs another - if then it will transfer the text.
Example:
(A2)LAST NAME (B2)1ST NAME (C2)RES# (D2)HOUSE (E2)DOB (F2)JOB (G2)SPECIAL
(A3)DOE (B3)JOHN (C3)112233 (D3)1 A2 L (E3)10/10/75 (F3)YES (G3)DR APPT
There are over 300 entries - one row new record. The CommandButton1 works great that I have for compiling and deleting unused rows.
But now I need something to get the data to the blank worksheet to compile data from Column G without formulas in the cells. This was one I found online, tried to adjust it to fit what I need, but I cannot get it to work.
Sub CopyRow(ByRef Target As Range)
Dim DstEnd As Range
Dim DstRng As Range
[Code].....
I am wanting a macro that will open an existing workbook (book2) and transfer information from the already open spreadsheet (book1) to the newly opened one.
So far I have
Code:
Sub email_sheet_and_save()
'ChDir "\sbscompanyfolder1"
' Workbooks.Open Filename:="\sbscompanyfolder1QUOTE LOG.xls"
Dim iRow As Long
[Code] ....
I cannot figure out the code to make the actual transfer eg cell C2 on book1 should transfer to (irow, 1) of book2.
I am trying to transfer information for the 'Master CCO CCB Document List' tab into one of the other tabs ('In Progress' and 'Complete') based off of the status. If the status is Complete, Approved, Declined will transfer to the 'Complete (Approved or Declined)' Tab. If the status says 'On Hold, Pending, 1st & 2nd Session Review needed will transfer to the 'In Progress (On Hold-Pending)' Tab.
I want the master list to house all of the entries, so when the status changes it is just copied to the other sheet and not cut and pasted.
On the 'In Progress' tab, once the status changes to Complete, Approved or Declined I would like for the item to be cut and pasted into the 'Complete' tab,
I'm stumped and really not sure if this will work properly. I've tried everything and now I can''t figure out how to add the contents from the form to the master list tab.
I am trying to transfer a set of values from a column on sheet1 into cells on sheet2. Sheet2 contains labels I made up so the cells I want the values transferred to are not in column format. Is there a way to write a formula so that it will transfer the values indirectly? By indirectly I mean that I want sheet1 a1 to go to sheet2 a1 then I want sheet1 a2 to go to sheet2 a32.
View 5 Replies View Relatedhow to make a program on deleting a row/s and transfer the deleted row to another sheet with the use of command button? I also want to have a message box appeared confirming that the row has to be
deleted.
Solve this issue for transfer value from master sheet ( Daily Report) to corresponding sheet and add value according to its Date. E.g. :
Master Sheet : Daily Report
Manpower : 35
I want to transfer the value of manpower to sheet ( D_manpower) and insert value 35 to according to month & date ( C5 & G5) shown in master sheet ( Daily Report )
Like this all data need to insert according to its corresponding sheet according to month and date
File attached : Report 2014.xlsx