I want to get the average of various non-contigous columns, ex:
Column B G X Z
10 0 6 8
However, I need to exclude any zero values. In this case the correct average is 8. I have used various sumif's and Average(IF) functions without success.
I've tried hard to come up with a title as accurate as possible. Here is my problem:
I have six cells that need to be summed (N9,Q9,T9,W9,Z9,AC9). The sum of the cells needs to be multiplied by however many cells that have numerical data in them divided by 6. Assuming all cells in the range (N9,Q9,T9,W9,Z9,AC9) have the value of 50 the following rules would apply: ...
I would like to average a non-continuous range of cells while also excluding all zeros.
I am averaging hours worked and the hours are found in cells:
B2, D2, F2, H2, J2, L2, N2
Some of these cells contain zeros at this time and I do not what to include the zeros in the average.
I have found formulas that would work but they are all with continuous cell ranges.
I have a worksheet with 35,136 rows of data. I want to calculate the average of every 4th cell in the same column. Is there a way to create a macro to select every 4th cell in the average formula? If so, can I then substitute min and max for average?
View 1 Replies View RelatedI would like to be able to count the amount of entries in column C and depending on the amount group them in either groups of 3 or 4, all names would be unique...so if there are 14 names in the list they would need to be grouped in to two groups of 4 and two groups of 3, if there were 19 then 4 groups of 4 and 1 group of 3 etc to a maximum 50 people, the results could appearon a seperate worksheet say pasted on to the worksheet starting with the groups of 3 (so paste a group of 3 then skip 3 rows then paste groups of 4 skip 2 rows, the row skipping is to allow seperation and manual entry of extra data). There will never be groups of 5 or more and never less than 3
View 8 Replies View RelatedI have a spreadsheet with multiple columns. I need to save values from each specific column, but they are not non-contiguous, to a .txt or .csv file. In other words, I may need B:10, B15, B12, B25, etc. saved as one string in a text file. I have been working on this for about 15 hours and can't seem to get it to work.
View 9 Replies View RelatedE11 through E24 contains numbers and a few errors (#N/A) that need to persist (the errors need to show).
E10 needs to show the average of the numbers that are in E11 through E24, and just ignore the errors.
I have many columns like that - where the errors need to show and I need to show an average of the number/values that do appear, ignoring the errors.
I have a column that has mostly empty cells. I want to select only the ones that have data so I can perform an operation on all of them. Empty cells must be excluded from selection. I do not know where the bottom of the data is.
The solution needs to be in VBA where it is part of a larger macro affecting the user's worksheet.
I'm trying to select a contiguous range of cells in a column and then iterate over that. I keep getting error "91", object variable not set. I have:
View 5 Replies View RelatedHow to make the below selected range, which represents column Q, also include column A?
Range(ActiveCell, ActiveCell.End(xlDown)).Select
I recently found this code for selecting a whole column of non continuous cells.
ActiveSheet.Range("a1",ActiveSheet.Range("a65536").End(xlUp)).Select
How can I change the "a1" & "a65536" so it can work and be activecell instead?
i have several listbox with two columns in a userform in a sheet i have several columns whith values and i'm trying to put the values from the columns in the respective listbox. down is the code i wrote but is stressing with column command
Private Sub UserForm_Initialize()
Dim contar, j, i As Double
Sheets("Historico").Select
contar = 0
For j = 1 To 15
linha = j
For i = 3 To 65536
I'm trying to figure out if there is a formula I could use that will calculate the average of a group cells in one column based on the condition of another column. It's hard to explain, so I will show an example. All the data is on a one worksheet and I'm trying to show totals and averages on another worksheet. Location, Days
17, 4
17, 3
17, 5
26, 4
26, 8
26, 10
26, 7
On a different worksheet I would want to know what the average days are for each location. So is there a formula that I could use that will look at column A for a specified location number and then average all the days in column B for that location? I'm using Excel 2003 and have tried using the Average(if) but with no success.
I have a pivot that includes customer data and I need to create an average for each row based on the first populated column for each customer. After one month of units appears for the customer, I need to calculate the average going forward, and if there are blanks after that they should be treated as 0 in the average. Below is an example of my description of the pivot.
Jan Feb Mar Apr
Customer #1 1 1 3
Customer #2 1 3
Customer #3 2 2
So, the average for customer #1 would be calculated from Column B to Column E, and factor column D as a 0 in that calculation. Customer 2's average would start in Column C and go to Column E, and factor column E as a 0 in that calculation. Customer 3's average would start in column D to column E.
I'm currently using this formula to calculate the average values in column B where the value in column A ='s E1 eg:
=AVERAGEIF($A$2:$A$21,E1,B2:B21)
Instead of doing this however, I need the formula to calulate the average from column B where the "Date" in column A ='s the year and month I specify in other cells.
Year value specified in: F1
Month value specified in: G1
I am trying to get an average from one column based upon criteria from an adjacent column. The number of days to close a case for race columns Black and White are listed in B5:C16 and E5:F16 and H5:I16. I need a formula to calculate the average days taken to close cases for Males and then the same for Females. Sample below: ...
View 12 Replies View RelatedI have tried a few other examples in previous threads that use COUNTIF and ISERROR but I just can't get it right.
Basically I want to average the cells in column J (J2:J6,J8:J12,J14:J18, etc).
My aim here is to determine the average value for each day (Averaging 0 values in this instance is OK).
Now, the date in column A (A2:A6,A8:A12,A14:A18, etc) sometimes returns a blank value, depending on the day of the week (see attached example). This is because, in the full version of the workbook, I have Column A date linked to a perpetual calendar and therefore the dates can change cells depending on the year.
For the Date Cells that return a blank value, I do not want the AVERAGE equation to include the 0 value on these days.
For an example I have attached a month of February where there are blank date cells at either end of the column.
I am trying to calculate averages for a ratio I have calculated. Is there a way I can use VBA or Excel functions to average the G column depending on the value of the D column? In other words, find the average value of column G for all Industry Group = 103. Then, find the average value of column G for all Industry Group = 106. Then put industry group # in column H and avg. value in column I.
View 2 Replies View RelatedIs there a way to average every other row in excel?
View 7 Replies View RelatedI have a column with values from P2 to P3077. I need a formula that would average values from P2:P6, P7:P11, P12:P16 and so on till the end (that is 5 data points each time till the end).
View 2 Replies View RelatedI do not use excel very often but know there is a simple formula to take the average of numbers inputted into a column. For example, I would like to sum all the values entered into column “D” and then divide that by the number of entries
4
5
3
1
4
11
6
2
0
----
36/9 = 4
If I were to add another entry it would automatically change the divisor to 10
Attached Dummy file. I would like to be able to get the average time spent on a process for the day recorded on the "Results" tab. I have posted the answers it should be on the Results tab, which was done manually. I would like the file to do it on it's own. On the individual's tab, the time and instances will be recorded for each job. I believe I am close, and the only thing I need is the Results page to be able to return the desired results. Ranges varies day-to-day, and I think (maybe), I can figure out the dynamic range settings.
I would like to avoid creating a helper column for each set, because then I would be dependent on the person expanding on this. I am also avoiding Pivot Tables, I understand it, but not the ones that needs it. This will have about 15 tabs for employees, and could be possible that more or less will happen, depending on workload. This will continue to be manual for now.
I need to get the average of every 6th cell in a column, excluding errors --- three times.
The first average should be every 6th cell beginning with z4, the second every 6th cell beginning with z6, and the third every 6th cell beginning with z8.
Is there an easy way to achieve these 3 averages?
I have information I'm trying to evaluate. Average Close time. but I need to evaluate it for each month. Forinstance if my average close time was B. and the close date was c. I would need the average(b:b) but only from fields that had a close date of July in column C. is this possible? I hate to have to break up the data set 12 times. (i'm reporting individually for each month of the year so we can see trends.)
View 12 Replies View RelatedI want to be able to find the last non empty row in column C and then average the last three inputs. Thus utilzing this as a means for a projection of the remaining periods left in the year. All for projecting figures for the remainder of the year.
Bill
Period
Date
Amount
1
1/6/2012
3982.76
[Code] ..........
In sheet 2 b2, I want to calculate the average of the values in the last column of sheet 1. So if the last column is D then all the figures in D are added up and an average given. But if the last column is M then it gives me the average of that column.
View 9 Replies View RelatedHow to sum or average the data in the even column ( I mean column 2, 4, 6, etc) in a range (like range A1:DD1)? I tried to use Mod and Iseven to get it but failed.
View 9 Replies View RelatedI'm using Excel 2003, so no AverageIf.
I have 15,000 rows of data.
In Worksheet_1, I have:
Column A (Date) contains daily dates ranging from January 1968 to today, though not every day is listed (weekends and holidays are excluded).
Column E (Price) contains daily prices.
On a separate worksheet (Worksheet_2), I need to calculate average monthly prices, listed by end of month dates (Monthly_Date and Monthly_Price, respectively).
I've been trying to use an array formula like this:
=AVERAGE(IF(AND(MONTH('Worksheet_1'!A2)=MONTH('Worksheet_2'!A2),YEAR('Worksheet_1'!A2)=YEAR('Worksheet_2'!A2)),'Workshee t_1'!E:E,"0"))
I can get an average of the whole column, but I cannot seem to make Excel "grab" only the corresponding data in Column E that matches the right date criteria (in this case, when the month=January and the year=1968).
I am trying to average times from one column that is the difference of two other columns (generally just minutes). It is formatted in a military time format.
However, I do have criteria it must meet from another column.
Ex:
Col A Col B Col C Col D
1 23:57 00:07 00:10 "=C2-B2+IF(B2>C2,1) fx I am using"
2 03:15 03:20 00:05
1 10:30 10:42 00:12
That's the basics, now I want to average Col D but only if it is a "1" in Col A. There are some empty cells, being its formatted for 100 entries. I can get an average of Col D and a count of Col A, but I can't combine them.
I have a colomn with numers and text. I would like to get an average of the numbers in the column, but using average (A1:A10) gives me #N/A as some of the cells contain #N/A.
So wondering if there is an AverageIF function in excel that I can use to write something which only averages IF it is a number.
Sounds very basic but I could not find anything through search.