I'm currently using this formula to calculate the average values in column B where the value in column A ='s E1 eg:
=AVERAGEIF($A$2:$A$21,E1,B2:B21)
Instead of doing this however, I need the formula to calulate the average from column B where the "Date" in column A ='s the year and month I specify in other cells.
Year value specified in: F1
Month value specified in: G1
I'm stuck on the final piece of my macro project. I've attached a workbook with two sheets: sheet 1 is what I currently have, and sheet 2 is what I'd like my report to look like when complete.
On Sheet 1:
- column B is called Supervisor Name
- Columns D-O are months of the year, with either a Yes or No in each cell.
I'd like to write a macro that will:
- Take all unique values in Supervisor Name column, and paste these Above the current table.
- For each Supervisor, and each month, I'd like it to calculate, as a %, the number of Yes mentions in each month divided by the total cells (Yes/(Yes+No)).
Sheet 2 contains the output, in the format I'd like to see it.
Sheet 2:
Supervisor Name
October
November
December
Supervisor 1
8.3%
[Code] .......
I'm trying to figure out if there is a formula I could use that will calculate the average of a group cells in one column based on the condition of another column. It's hard to explain, so I will show an example. All the data is on a one worksheet and I'm trying to show totals and averages on another worksheet. Location, Days
17, 4
17, 3
17, 5
26, 4
26, 8
26, 10
26, 7
On a different worksheet I would want to know what the average days are for each location. So is there a formula that I could use that will look at column A for a specified location number and then average all the days in column B for that location? I'm using Excel 2003 and have tried using the Average(if) but with no success.
I have a pivot that includes customer data and I need to create an average for each row based on the first populated column for each customer. After one month of units appears for the customer, I need to calculate the average going forward, and if there are blanks after that they should be treated as 0 in the average. Below is an example of my description of the pivot.
Jan Feb Mar Apr
Customer #1 1 1 3
Customer #2 1 3
Customer #3 2 2
So, the average for customer #1 would be calculated from Column B to Column E, and factor column D as a 0 in that calculation. Customer 2's average would start in Column C and go to Column E, and factor column E as a 0 in that calculation. Customer 3's average would start in column D to column E.
I need a cell formula that will (a) identify the highest N values in an above specified column range, (b) color the interior of those N cells (I suspect that this is not possible), and most importantly (c) return the average value of N corresponding cells, where the corresponding cells are located on the same rows as the identified N high value cells but in a specified column to the left (not necessarily adjacent)
Does anybody know what this formula would look like?
Example:
-----------------------
...| A | B | C | D | E | F |
-------------------------
1 |....| * |.........| 7 |...
-------------------------
2 |....................| 2 |...
-------------------------
3 |....| * |.........| 6 |...
-------------------------
4 |....................| 1 |...
-------------------------
5 |....| * |.........| 5 |...
-------------------------
6 |....................| ? |...
-------------------------
? = average of B1,B3,B5 where (N = 3) and (specified column to the left = B)
I have a file with a column containing a series of records where a reference number can be repeated several times. I want to create a formula that will count the number of unique reference numbers in the column.
However - and this is the tricky part - I need it to allow for when the report is filtered, i.e. something like a SUBTOTAL function which ignores the hidden values.
So, the column in the full report has 691 unique values across 2,200+ records. If I apply a filter the column only has say 78 unique values. Is there a formula that can calculate this?
Below the two columns represent Column A (date and time) and Column B is temperature.
How can I take the mean of all temperature values for May 1, then take the mean of all temperature values for May 2, etc.?
5/1/2013 0:0012.4
5/1/2013 1:0012.4
5/1/2013 2:0012.5
5/1/2013 3:0012.5
5/1/2013 4:0012.5
5/1/2013 5:0012.4
5/1/2013 6:0012.4
I have tried a few other examples in previous threads that use COUNTIF and ISERROR but I just can't get it right.
Basically I want to average the cells in column J (J2:J6,J8:J12,J14:J18, etc).
My aim here is to determine the average value for each day (Averaging 0 values in this instance is OK).
Now, the date in column A (A2:A6,A8:A12,A14:A18, etc) sometimes returns a blank value, depending on the day of the week (see attached example). This is because, in the full version of the workbook, I have Column A date linked to a perpetual calendar and therefore the dates can change cells depending on the year.
For the Date Cells that return a blank value, I do not want the AVERAGE equation to include the 0 value on these days.
For an example I have attached a month of February where there are blank date cells at either end of the column.
I have a DATEDIF column which I have used to calculate the age of a group of people from their dates of birth. This has produced results in cells which look like this: Age is 44 years, 1 Months and 28 Days
Where I am stuck is that I need to calculate the average of this column so I get the average of the total group. Is this possible?
Daily Result
14
10
16
10
5
15
8
12
15
9
I have the formula working for the average of the 4 lowest of all, using "AVERAGE" and "SMALL"; need for average of 4 lowest in most recent 7
I have an excel spread sheet with columns of dates I am trying to get an average formula that counts dates less than a year old as 1 and blank cells and dates greater than a year old as 0 and then gives me a percentage. For example I have a column with 10 dates all less than 1 year old I would get 100% but if I had a column with 8 dates less than a year old and 1 dates older than a year, and 1 blank cell, I would get 80%
Is this possible at all, or do I have to calculate the percentage for each column individually.
I have a column with values from P2 to P3077. I need a formula that would average values from P2:P6, P7:P11, P12:P16 and so on till the end (that is 5 data points each time till the end).
View 2 Replies View RelatedI have a table full of phone numbers and call durations.
In A2:A6160, I have 162 different phone numbers and in U2:U6160, I have the call durations for calls made to those numbers.
In a separate spreadsheet, I have each number listed in Column A and in Column D, I want to display the average call duration for each of the numbers.
Formula(s) to do as explained in the attached example.
Example_formula.xlsx
I have a code that inserts a new column after every 7th column. I want to include a formula where every 7th column value is subtracted from the values present in the column before the 1st, or you can think of it as subtracting 7th column of the present group from the 7th column of the previous group. Example: The range of my data starts from col F, then
F (7th) New Column (G) H (1st) I (2nd) J (3rd) K (4th) L (5th) M (6th) N (7th) New Column (O) P (1st) Q (2nd) R (3rd)
So, New Column (O) = N - F
and the next New Column (W) = V-N ...
NOTE: Column G can be ignored.
I want to add a looping function to this so that it will continue to subtract for the other respective columns as well. How do I incorporate this into the following code?
[Code].....
I'm using Excel 2013.
see the attached spreadsheet including the data. In Column AA I have created a formula that looks at Column B, and pulls each unique value from that column. add to this formula, or propose a new one, that pulls unique values into column AA if at least one of the rows has an "Actual Finalization Date" in column D that is in 2014?
View 1 Replies View RelatedI have been working on this for days and cannot come up with a answer to this. I am trying to average a column that has percentages. some of the cells have o's in them and the numbers that I am trying to average is a weekly number. So I am trying to average every 7 days percentage. Is there a way to do this? I have looked thru the forum and all over the web and can't come up with an answer. I have excel 2003. Do I have to write a macro for this or can I just do a formula? If so how do I do it?
View 9 Replies View RelatedI have a simple script that puts the save time in the last row of column C when the spreadsheet is saved. Another script puts a username in Column A and column B contains the time opened. I would like to add to the save script to make column D od the active row have a calculation similar to:
View 2 Replies View RelatedNeed a formula to calculate a absolute total from a column of totals.
I thought this was simple, but the formula I made didn't work.
Formula which can calculate how many days in a month and create a column for each day. Columns for day 28, 29, 30 or 31 also need the formulas in columns 1 to 27 copied over automatically. [sheet name "LARSheet1 to 1" ]
I'm trying to build "Leave, Attendance Management" system using Excel. I am about 40% there so far.
The basic structure of the workbook is as follows:
12x main monthly "Leave Attendance Record" worksheets (i.emonths April 2012 through to March 2013). [I will refer to these sheets asLARSheet1 to LARSheet12 ].
1 x worksheet which holds "data validation" list andvlook up info. ["FormulaListSheet"]
1 x worksheet acting as a database of staff details andpay numbers. ["StaffdBaseSheet"]
1 x summary page which shows staff reaming leaveallocation. ["SummaryLeaveSheet"]
What I'm having problems with at the moment is as follows:
A formula or a macro which works out how many days are present in a given month [starting date of month located in CELL B10].
Days 1-27 will be already set up on the sheet. Based upon the monthly value I would like a solution which can calculate how many days are in a month and create a column for days 28, 29, 30 or 31 (depending on the month).
I would like it to work like this:
When the user opens a new worksheet, they first entre the month start date in CELL B10. Hopefully this will trigger columns E13:AH22 to update with the relevant week day & date.
I also need the formulas and formatting in cells AH13:AH100 (column for day 27) to copied over automatically.
Sample of sheet setup : screenshot_LARSheet1.PNG
I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
I am trying to get an average from one column based upon criteria from an adjacent column. The number of days to close a case for race columns Black and White are listed in B5:C16 and E5:F16 and H5:I16. I need a formula to calculate the average days taken to close cases for Males and then the same for Females. Sample below: ...
View 12 Replies View RelatedI am making a summery table of lots of soil contaminant data.
In my summery table, for each determinand I want the average value automatically taken from data from a number of other tables within this same spreadsheet.
For example, for pH- I would average the pH value found in each table, from cell D6, G24 and AB9.
The problem:
Out of the three tables where I take each pH value from, on occasions only one will have a value- the other two will be "0".
How do I ensure that, when averages are taken, it will always ignore '0' values?
I'm trying to calculate the number of days between dates in column A and B. I've looked at the examples in this site and thought I used the formula correctly, but the cell returns an error message when I type: =DATEDIF(A1,B1,"D")
View 7 Replies View RelatedI love this forum, and am usually able to find the help I need without bothering anyone However this one has me stumped and I wonder if anyone can help. It feels like it should be a fairly simple solution, but they can often be the ones that are most eluding LOL!
I have two columns; in column A are incoming telephone numbers and in column B are the date and time the calls were made. (I've put a few hashes in column A just to maintain confidentiality of the numbers, but in reality the cell is formatted as text in order to maintain the leading zero, and entries will follow the format 01234567890)
A sample would look like this:
0##6270####01-Mar-2009 00:01:440##6271####01-Mar-2009 00:03:020##6271####01-Mar-2009 00:03:040##6272####01-Mar-2009 00:16:330##6273####01-Mar-2009 00:30:490##6274####01-Mar-2009 00:55:470##6274####01-Mar-2009 01:06:170##6274####01-Mar-2009 01:07:420##6275####01-Mar-2009 01:08:360##6275####01-Mar-2009 01:11:410##6276####01-Mar-2009 01:13:45
Some numbers only call in once, I need to identify them as only called once.
Some numbers call twice, if they do I need to be able to show time it took between call 1 and call 2.
Some numbers call more than twice. For each successive call I need to be able to show the time since the previous call.
In my mind, the results table would need to look something like this:
NumberTime of callTime between
1st and 2nd call
Time between
2nd and 3rd call
Time between
3rd and 4th call
0##6270####01-Mar-2009 00:01:44Only called once0##6271####01-Mar-2009 00:03:0200:00:020##6272####01-Mar-2009 00:16:33Only called once0##6273####01-Mar-2009 00:30:49Only called once0##6274####01-Mar-2009 00:55:4700:10:3000:01:250##6275####01-Mar-2009 01:08:3600:03:050##6276####01-Mar-2009 01:13:45Only called once
Worksheet 1
I am calculating group averages for the following performers - very good, good, average, low, very low - for a series of factors.
Worksheet 2
Contains the same factors with the values for which Im trying to work out the average. Each factor has a performance rating above it, either very good, good, average, low, very low.
I need a formula which will match the performance rating from worksheet 1 (I3, J3, K3, L3, M3) to worksheet 2 and then calculate the averages of each factors based on those matches.
E11 through E24 contains numbers and a few errors (#N/A) that need to persist (the errors need to show).
E10 needs to show the average of the numbers that are in E11 through E24, and just ignore the errors.
I have many columns like that - where the errors need to show and I need to show an average of the number/values that do appear, ignoring the errors.
For column "B" count all the 1's if column header is equal to name in column A.
For Column "C" needs to be checked if a value was filled in column "I" if yes then check if in column "L" has a value, count all these values.
I have a row of data starting in cell E4 that could, theoretically, go to the far right end of the spreadsheet. I need to enter a formula in cell D4 that calculates the average of every other cell in this row, starting with E4, that is E4,G4,I4,K4...
View 9 Replies View RelatedI have a problem when Im trying to calculate averages in my pivot table. I dont know how to handle my missing values. If I leave them blank I cant get the average at all because the values end up under the dates instead of in a column next to the dates where I want them to be. If I write 0 it uses it as a value, eg 2+2+0 and i get 1,33 instead of 2. Also the zero could be a value for some of the parameters, so it's no good.
I am new to pivot tables.