I have information I'm trying to evaluate. Average Close time. but I need to evaluate it for each month. Forinstance if my average close time was B. and the close date was c. I would need the average(b:b) but only from fields that had a close date of July in column C. is this possible? I hate to have to break up the data set 12 times. (i'm reporting individually for each month of the year so we can see trends.)
View 12 RepliesI am trying to get an average from one column based upon criteria from an adjacent column. The number of days to close a case for race columns Black and White are listed in B5:C16 and E5:F16 and H5:I16. I need a formula to calculate the average days taken to close cases for Males and then the same for Females. Sample below: ...
View 12 Replies View RelatedI am trying to get the average of two columns
column A and Column B
Column A has text (survey type) i.e. Move In, Mid Year, Year End
Column B has the scores given on that survey type i.e. 70
I am trying to get the average of of all the Move In cells from column A
for each survey type so that I get average of all the scores in column B.
I have 2 columns of data in Excel which I have brought a small section of it below. As can be seen the values in the left column have a large spike (difference of more than 10) at certain points (in this case at 34). I wan to find the average of the numbers in the right column but only till the point where the large spike happens (in this case the average of the first 5 numbers). I've tried AVERAGEIF but it's not what I want. I want this to repeat for the entire column and give me the averages of each of these groups.
10
32.4
11
38.6
12.5
23
[Code] .........
E11 through E24 contains numbers and a few errors (#N/A) that need to persist (the errors need to show).
E10 needs to show the average of the numbers that are in E11 through E24, and just ignore the errors.
I have many columns like that - where the errors need to show and I need to show an average of the number/values that do appear, ignoring the errors.
I worked on a countifs function, but i needed a average of column N.
the countif formula is
A2 = current month
=COUNTIFS(
'Location'!J3:J999,">="&$A2,
'Location!J3:J999,"<="&EOMONTH($A2,0),
'Location'!M3:M999,"Name")
With the exceptions from above i need to get a average from column N.
I have 2 rows of data
1. title
2. value
eg
Row 1: Title1, Title2, Title1, Title4, Title2, Title1
Row 2: 2 , 3 , 0 , 1 , 2 , 6
In the above I am looking for the average of Title1, where the value is greater than 0. There are 3 occurances of Title1, but only 2 have values. The answer i am after is Sum is 8, average is 4 (ie 8/2 and not 8/3)
Ceate a formula for weighted averages according to criteria?
I want to know what was the average price I bought a product at on today's date. The average price needs to be weighted against the quantity of product sold.
I would like is the average of numbers that are on certain sheets with a certain criteria. I have an excel example that might explain more.
In column A is the staff name, column B is the start date, column C is the end date and column D is the difference.
I need to find the average number days for task completed for each staff for the week. I need a formula that will look for a particular staff name in column A ( which appears many time randomly in column A for each day of the week) and calculate the average days for the total task completed for the week.
I have two columns. Column A has lots of repeated values, and column B is a list of numbers. For example:
A 1
A 3
A 4
A 2
A 6
B 1
B 1
B 2
B 1
C 3
C 3
C 2
C 4
Is there any way to output the following:
A 3.2
B 1.25
C 3
Where the second column are the averages. Any Excel function or VBA method will be fine.
i have a excel spreadsheet that contains point of person. Every week a person can or can not compete. That means that there is some days that is blank wouthout points. I want to get the latest 5 points of a person and then out of that 5 i want to get the top 3 point.
View 6 Replies View RelatedI have trouble finding the right formula for a weighted average price. The formula which i used in cell B2 of the attached file doesn't exclude irrelevant numbers. In the formula "= sumproduct(a5:a21;b5:b21)/sum(b5:b21)", i like to exclude cells B8, B9, B15, B19, B20 because the list prices are missing. How can i exclude these irrelevancies in the formula above?
View 3 Replies View RelatedI have a large set of data. I need to be able to search this data routinely using an origin and destination zip code and sum the search results. Is this possible in Excel?
View 5 Replies View RelatedI am trying to create a macro using arrays to calculate average sales from a list of sale amounts that originate from different cities. Each city has its own city code and I want to display the average amount of sales for each city. The attached file is the template that ive created to do this. I am having trouble getting the arrays and loops to work. If anyone can help me out I would greatly appreciate it.CitySales2.xls
View 3 Replies View RelatedI have 4 columns of data, and need to average values that correspond to certain criteria from the other 3 columns. Attached is an example of my data and the desired output. The averages need to come from non-blank cells from Inputs 1 and 2 that match the criteria from the Name column.
View 5 Replies View RelatedI have a data set that looks something like the following:
TypeAmountCost
A100$50
A200$40
A300$35
B250$40
B275$55
B500$60
A700$20
B350$25
B450$35
C400$80
C400$60
I am having trouble creating a formula that would calculate the weighted average cost depending on the type (i.e. weighted average cost of $28.84 for A, weighted avg cost of $70 for C).
I'm trying to sort column G for any "Approved" or "Denied" outcomes then find the time difference between columns E and F then divide that difference by the number of approved or denied in column G. I've tried a number of combinations of SUMIFS, IFS, COUNTIFS, and Ave formulas but can't come up with one that works. Here's an example of what I'm trying to do:
Sum E-F if G= "Approved" or "Denied" / the number of "Approved" or "Denied" outc
I need to figure out a way to get an average for the numbers in column A, but ONLY those numbers in column A that have the number "1" in column B. example:
Column A Column B
3 5
6 1
4 1
The average would be "5", because the numbers 6 and 4 have "1" next to them in column B.
I have a series of numbers in the column AB56 going downwards and in AC56 going downwards their respective counts in a data-set.
What I would like to do is find the average of the min and max, the min and max for the average calculation are both determined by looking at the count column, isolating the max, isolating the min, provided they both have a count greater than zero then averaging both results.
eg.
0.1562818960
0.1558039690
0.1553260431
0.1548481172
0.15437019 2
0.1538922643
0.1534143384
0.1529364124
[code].....
In this calculation the MAX is 0.155326043 because it has a count greater than zero, the MIN would be 0.138120697 as it has a count greater than zero, the average of both would simply be 0.1467. i.e. Average(0.155326043,0.138120697)
I am trying to work out average for a particular area based on a criteria.
eg:
E F
Area time
A 01:00
B 02:15
A 01:15
C 01:16
B 01:30
C 03:15
In Cell
E100 - 103 I'm trying to work up the average of each area and using the following formula.
=AVERAGE(IF($E$4:$E$61="A",F4:F61,""))
I keep getting an the following error #value!.
i changed the average to median and still get the error.
I have to find the average of a set of data with a lot of different criteria. I think an array formula would work wonderfully but I just cannot seem to get it.
My example: I have a large set of data that I must get multiple averages from that fall within differing sets of criteria. For my example we'll just say that I have to find the average of the number column that occurs on or after Jan-12 (January 2012) and is type "p1" or one that has no date and is type "p1" and to not average numbers that are equal to 0. So logically it would look like this: If date
I have a data base with 12 columns of data. I need it to look for one criteria in one row, match it, look for another criteria in another row, match that, and then once those criteria are met, average those rows that met the criteria with the statistics in that row that contains a value.
Such as:
Monica 2 Timed 310 Michele
Tom 3 UnTimed 410 TC
Art 5 Timed 216 TC
Monica 4 Timed 415 Michele
Tom 6 Timed 200 TC
Tom 4 Untimed 216 TC
Art 8 Timed 410 TC
What I need is the formula to search in through the data, look for Tom, then find all the ones that say UnTimed, and then average the number in column 2 that match those criteria.
I have a list of ages of people who cancelled their account. I'd like to find the average age of people within each month.
So column A = age
and column B = cancel date
Let's so for January 2006 I'd like to find the average age.
Logically this is how I see it...
Average Column A (If column B >= 1/1/2006 and < 2/1/2006)
I'm trying to find the best Macro or Formula to get this done.
Sheet 1 has a list of salesperson in column "A" and the total numbers they made on Monday (in the same row, column "E"), Tuesday (In the same row, column "F"), Wednesday (In the same row, column "G"), Thurday (In the same row, column "H"), and Friday (In the same row, column "I"). I also have a sheet for each individual salesperson. I need to find a Macro or a Formula that I can use to give me the average of the numbers if "A5" = the salesperson in Sheet 3 then avarage the numbers from "E5" to "I5" and I want the results to show up in cell "D35".
how to do a weighted average with a text criteria. I have 3 columns and many rows. The first column has either "buy" or "sell". The thing is I need to find the weighted average based on the product of the other 2 columns for buy and sell separately e.g.:...............
View 5 Replies View RelatedI have an Excel file ( book) that I use for scheduling my restaurant employees. There are currently formulas in place that retrieve information from cells on one sheet to a cell on another sheet. For example:
If, on the first sheet I schedule Joe the following section on Tuesday AM (D14), his name will be automatically shown on another sheet which list the section/floor plan in quick view.
I need a formula (on a third page) that will allow me to tell me how many times an individual employee has had this particular section. The sections are listed with a letter preceding it. Such as D**, P**, B**, SB**, etc.
I have an excel sheet with different data columns (Column A = date, Column B = Production line, column C = total production of the line for the month, column D = complaints per milion). Within the same sheet Columns E through L have formulas and fucntions that uses Columns A thru D for calculation. Also every month a new row is added to the sheet, populating of course Columns, A, B, C and D and the other columns E thru L are populated automaticaly with the functions/formulas i have in place.
My question is within the same sheet I have 4 fixed cells I2, J2, K2 and J1. J2 and K2 depend on I2 and K2 values. Since my date changes every month (the inserion of new rows). I would like if someone can help me in how those cells I2 and K2 can be updated when i enter a value in Column C/ cell?? (??=next blank cell). I2 and K2 calucalates the averages of the last new 17 cells of columns H and L respectively.
So all i need is that cell I2 and K2 be updated automatically as soon as i add the new value in column C Example
This month
C22 = 12345 I2=Average(H5:H22) and K2=Average(L5:L22)
Next Month
C23=78901 I2=Average(H6:H23) and K2=Average(L6:L23)
So I type the input in column C everything is updated automatically. Again i dont know if i can do that with the if/offset, etc or if i need a macro.
I'm currently stuck with the following problem. I have a fairly large database with 10,000+ companies (in the rows) over 10 years (in the columns). I want to aggregate industry averages of a financial item in so-called SIC codes (there are approx. 1,000 different 4-digit SIC codes).
I've been using the daverage function, which works for one criterium (e.g. SIC = 0100) but not for the entire range of criteria. Does this mean I'll have to manually adjust every daverage function for every single SIC code? Or can this process be automated in some way?
Attached is a simplified version of my database file.
I need an array formula that can take average based on multiple criteria present row wise and column wise.
Check the attached sheet for detail. I need array formulae in yellow space. I have given one result that I need.
Average.xlsx