I am trying to get an average from one column based upon criteria from an adjacent column. The number of days to close a case for race columns Black and White are listed in B5:C16 and E5:F16 and H5:I16. I need a formula to calculate the average days taken to close cases for Males and then the same for Females. Sample below: ...
View 12 RepliesI am trying to get the average of two columns
column A and Column B
Column A has text (survey type) i.e. Move In, Mid Year, Year End
Column B has the scores given on that survey type i.e. 70
I am trying to get the average of of all the Move In cells from column A
for each survey type so that I get average of all the scores in column B.
I have 2 columns of data in Excel which I have brought a small section of it below. As can be seen the values in the left column have a large spike (difference of more than 10) at certain points (in this case at 34). I wan to find the average of the numbers in the right column but only till the point where the large spike happens (in this case the average of the first 5 numbers). I've tried AVERAGEIF but it's not what I want. I want this to repeat for the entire column and give me the averages of each of these groups.
10
32.4
11
38.6
12.5
23
[Code] .........
Any way to construct a formula in excel that will look at a reference in one column and find the latest date from the data in an adjacent column for that specific reference?
Below is an exctract from a much larger sheet of the columns in question.
The result in the last column should be 21/05/2014 for anything with D.O.001 in the second column and 15/05/2014 for anything with D.O.002.
Date Decision agreed
Disposal Order
Latest Decision date for D.O.
06/05/2014
D.O.001
[Code] ........
I'm trying to figure out if there is a formula I could use that will calculate the average of a group cells in one column based on the condition of another column. It's hard to explain, so I will show an example. All the data is on a one worksheet and I'm trying to show totals and averages on another worksheet. Location, Days
17, 4
17, 3
17, 5
26, 4
26, 8
26, 10
26, 7
On a different worksheet I would want to know what the average days are for each location. So is there a formula that I could use that will look at column A for a specified location number and then average all the days in column B for that location? I'm using Excel 2003 and have tried using the Average(if) but with no success.
I have a pivot that includes customer data and I need to create an average for each row based on the first populated column for each customer. After one month of units appears for the customer, I need to calculate the average going forward, and if there are blanks after that they should be treated as 0 in the average. Below is an example of my description of the pivot.
Jan Feb Mar Apr
Customer #1 1 1 3
Customer #2 1 3
Customer #3 2 2
So, the average for customer #1 would be calculated from Column B to Column E, and factor column D as a 0 in that calculation. Customer 2's average would start in Column C and go to Column E, and factor column E as a 0 in that calculation. Customer 3's average would start in column D to column E.
I have information I'm trying to evaluate. Average Close time. but I need to evaluate it for each month. Forinstance if my average close time was B. and the close date was c. I would need the average(b:b) but only from fields that had a close date of July in column C. is this possible? I hate to have to break up the data set 12 times. (i'm reporting individually for each month of the year so we can see trends.)
View 12 Replies View RelatedI have a spreadsheet with a list of account numbers and values(sheet1) and on a seperate sheet (sheet2) a list of all unique account numbers that appear in the transaction data sheet.
What I am trying to do is get a total sum for the values of each account number. What I am getting well I'm not quite sure what I'm getting. The problem appears to be when the xSubtotal variable is reset to 0 at the end of calculating all the values for the account number.
I have the following sample data set and I'm trying to return the appropriate column header based on criteria (i.e. DDD) and a number value which will be somewhere within the range of the table. In example below, the value returned should be Header 2 because the value is greater than those in Header 1 column (range H9 to L26).
Here's data table:
CriteriaHeader 1Header 2Header 3Header 4
ZZZ5.0015.0050.00130.00
ZZ5.0015.0050.00130.00
Z5.0015.0050.00130.00
YYY5.0015.0050.00130.00
YY5.0015.0050.00130.00
Y5.0015.0050.00130.00
DDD5.0015.0050.00130.00
DD5.0015.0025.0075.00
D5.0015.0020.0065.00
RRR5.0015.0015.0045.00
RR2.5010.0010.0030.00
R1.503.0010.0025.00
UUU0.751.505.0020.00
UU0.751.505.0020.00
U0.751.505.0020.00
P0.751.505.0020.00
T0.100.105.0018.00
CriteriaNumberValue
DDD10.00Header 1>>>=INDEX($I$9:$L$9,MATCH(I29,INDEX($I$10:$L$26,MATCH(H29,$H$10:$H$26),)))
I have two columns. Column A had numbers and column B has names. I need a count from column A for each name in column B.
View 1 Replies View RelatedI am trying to calculate averages for a ratio I have calculated. Is there a way I can use VBA or Excel functions to average the G column depending on the value of the D column? In other words, find the average value of column G for all Industry Group = 103. Then, find the average value of column G for all Industry Group = 106. Then put industry group # in column H and avg. value in column I.
View 2 Replies View RelatedIf i have the following layout of data
Column 1 Column 2
January 1000
January 1234
February 1300
March 1600
January 15
March 123
April 234
January 3000
I would like a formula that adds all the January numbers together returning a result of 5249
To move this one step further i would eventually need to add these numbers based on quarters, for example if the value is January February or March in column 1 then add the numbers in column 2.
I'm sure i have done this before using a countifs maybe but my mind has drawn a blank
I have an personnel file with employee info, and I want to create a macro that will look in the "Master" worksheet at the Department column ("I") for anyone in Benefits, and then copy their name from the Name column ("D") into the "Benefits" worksheet. The names should begin pasting in cell "D3" but will recognize if a cell already has a name in it and then paste in the cell below that.
Here is what I have:
Option Explicit
Public Sub RatingbyDept()
Dim Dept As Range
With Sheets("Master")
For Each Dept In .Range("I2:I1000")
With Dept
I keep getting error 92 - "For loop not initialized".
I have a column with random values that are generated my my machinery.I should not sort them, because they provide me with the performance graph. Lets say i have column "A"
0
2
9
9.5
30
90
22
15
9
0
As the max value of this is 90, and its 10% of MAX is 9, which occurs at 3rd and 9 th positions.I need to find the average of its adjacent range, with zeros not considered.It has to calculate the max value in the column, find 10% of max and do average of adjacent column from the sl. no of first occurrence of 10% value in first column to the sl no of last occurrence of 10% value in first column.
the exact 10% value may not always exist. 10% of 90 is 9, but if the max value is 94, the 10% would be 9.4 which doesn't exist. then it has to take the nearest available predecessor in that case.i get values in decimals mostly and only some of them are perfect integers, thus this consideration goes with it,and also, my range actually is B14:B10013
i would most probably have the 10% value within the first 50 "non zero" entries and reoccurring somewhere probably within the last 50 "non zero" entries.
I'm trying to highlight cells a certain color based on the value of the cell 1 column to the left. How would I be able to do this in conditional formatting?
Example)
Highlight the cells in "Visit 2" column if it is greater than the "Projected Visit 2" column.
NameProjected Visit 2Visit 2Person 124-Nov-0820-Nov-08Person 226-Jan-0927-Jan-09Person 32-Jan-082-Jan-08Person 430-Dec-0829-Dec-08Person 46-Nov-0830-Oct-08
How would you select cell values from differing rows based on the name in an adjacent column. ie, if it says John, add that data to the source data, if not move on.
View 5 Replies View RelatedI have 2 columns; 1 with "dates" of incidents, the other with "number of incidents". The dates are not in any order but I want to be able to count "number of incidents" for certain time periods. e.g. If dates are between 01/02/14 and 28/02/14, what are the number in incidents. This number would be represented on a new worksheet.
I've looked at COUNTIF/S, SUMIF but just cant get there.
The below sample is an accurate example of a much larger set of data. Column H will be my desired result.
I need a macro that will look at the matching values (numerical value of month) of Column F, then enter the sum of the corresponding values (rows) contained in Column D for that month. The sum of each month should be placed in Column H at the last value of the row for each particular month.
A
B
C
D
E
F
G
H
1
Item#
Description
Quantity
Month
Year
2
1001
[Code] ........
I have a worksheet with following data in 1 tab.
[TABLE]
Seq Class
SE110
SE270
SE110
SE370
SE310
SE110
SE170
SE370
[/TABLE]
In a different tab I want to calculate the unique count of sequence for a specified class.
In above eg: for class 10 it should return 2
I am limiting choices in a certain cell to a list via data validation (using data validation, allow - list and pointing to the source). I want to limit the next set of choices in the next column (in this example in Column C) for the user based on the choice made in the adjoining cell. For example to keep it simple I will use the following: if the user selected "Fruit" in B1, then the options in C1 would only show "Oranges","Apples", "Pears". If however the user selected "Veg" it would only show "Cucumber", "Lettuce", "Spinach", "Radishes" in the drop down in column C. I can put a prefix in front of the column C data validation list if that is needed to narrow down e.g. FR-oranges, FR-apples etc.
A B C
1 Fruit Oranges
2 Veg Lettuce
3
Data Validation source for Column B (H2:H4)
Fruit
Veg
Nuts
Data Validation for Column C: (I2:I10)
Oranges
Apples
Pears
Cucumber
Lettuce
Spinach
Radishes
Almonds
Peanuts
I have a spread sheet which totals the amounts in 2 columns D and E, which are pounds and pence. The formulas for each one are:
Pounds
=SUM(D3:D8)+ROUNDDOWN((SUM(E3:E8)/100),0)
Pence
=MOD(SUM(E3:E8),100)
These work very well and give me the correct figures.
What I would like to do is to add up the values of each row based on the criteria of column C and have just one value in ONE cell (as shown on lines 13 & 14), so for instance:
When added together the values of rows 3,4 & 6 are 7.25 (based on a value of "W")When added together the values of rows 7 & 8 are 5.00 (based on a value of "F")
I have tried to show this as an example in the image below:
A
B
C
D
E
[Code]....
I'm using Excel 2010 on Win 7 Pro.
I would like to average a column based upon another column value. Namely, if one column is a duplicate, I would like to take the column to its right value and average all the duplicates. For example
comp 1409 99.7
comp 1409 99.5
comp 1409 100
comp 1308 65.7
comp 1509 99.5
I would like that to become
comp 1409 99.73
comp 1308 65.7
comp 1509 99.5
I have a list of 186 random numbers sorted by descending order in column A. In column B I have another statistic of corresponding values to the number in column A. I am hoping to calculate the average of values in column B based on the percentiles of column A. (i.e. for the top 10th percentile values of column A the average B value is X, for the top 20th percentile of values in column A, the average B value is Y).
View 2 Replies View RelatedFormula(s) to do as explained in the attached example.
Example_formula.xlsx
I need a formula to run down a column DCapture.JPG (starting at 142), when it finds the last entered value it needs to display the corresponding value from column J into cell AA21.
If you see the attached photo, the last entered data in column D would be 1, AA21 would be saying -30 (J205)
Capture.JPG
I have a worksheet on which the data is already grouped. At the top of each group is a row that contains only the group name. Since the rest of that row is blank, I want to use a blank cell on that row as a reference, then copy the group name to a newly created column, then fill that column down to the next group.
The goal is to create a column that contains the group name, rather than just having the group name as a " header" at the top of each group.
I was wondering if there is a way for excel to compare cells and identify when they are identical. My objective for this is as follows. Lets say i have some data entered in cells A1:A10. Suppose cells A1,A3,and A4 had the same value (112-343). Now suppose cells B1:B10 had values also, lets say B1=2, B3= 2.5 and B4=8. I need for excel to go through the A1:A10 range and realize when the A cells have identical values, after this is realized i want excel to take the values in the B cell that correspond to the identical A cells, average them and then store them in cell C. And if there are mutliple identical cells i would like the routine to be able to identify this also. lets say A1=A3=A4=(112-343) and A6=A8=A9=(154-456) ....
View 7 Replies View RelatedI need to sum values in a column, but only if the text in the same row of the adjacent column meets certain criteria. Below is a simplified version as an example:
A1 - Apple
A2 - Banana
A3 - Apple
A4 - Banana
B1 - 3
B2 - 2
B3 - 1
B4 - 1
I need a formula that will add up the cells in column B that have "Apple" next to them in column A. Apple would total up to 4 and Banana would total up to 3.
How do I calculate the average based on multiple conditions? Is my syntax incorrect?
Here's what i'm looking for:
=average((IF(X1:X1000=A1)*(Y1:Y1000=B1),AA1:AA1000))
Im wondering if this can be done in excel..
2 columns
if the value in column O=$0.00 then I need to divide the adjacent cell in column L by 0.3 or multiply by 30%
this is the way I was trying to do this...
=IF((O2:O6722)=0,DIVIDE(L2:L6722).3)
I have tried it several different ways and cannot get it to work - is it my formula or can this even be done because I can't reference just one cell?