When I open a saved excel file I am having a problem with one workbook opening(a blank one), then the box saying that the program contains macros, and then the second actual workbook opening. I do not know what I changed somewhere alone the line, how to make just the one workbook I want (the second one) to open?
When I open any saved Excel file the saved file opens along with a blank workbook titled "Book 1". How can I make it so when I open any saved Excel file it only opens the file I want and not a new workbook every time?
I have a need to open a file from my companies intranet. My current method was to open said file via the method that the recorder gave me. However, I would like ot be able to open a said file without having to start open another workbook.
This is the path: [url]
So the command is this: Workbooks.Open [url]
Links are not actual links
So what I need to know. Is how can I open this file without opening a workbook. I haven't been able to use the VB "Open Statement" to open a file and I don't believe that I've been successfull using the Filesystem object either.
This code opens a UserForm in the Workbook_Open event when the file is opened. After 10 seconds, the message is supposed to go away if the user doesn't click anything, then macros that follow are supposed to run. It is intended to allow a user to stop the macros. This works when you open the file manually (macro security must be low), you'll see a msgbox pop up after the UserForm goes away.
However, when the workbook is opened as a Windows Scheduled Task (Windows/ Control Panel/ Scheduled Tasks), the UserForm does not come to the front of the screen unless a user actually clicks on the window. It just flashes at the bottom indefinitely.
I have code in VBA that takes a source Excel file and parses it to multiple re-formatted worksheets. Each formatted worksheet is different depending on a variable in the source. There are n of each type of data (1:n Water Sources, 1:n Water Treatment, 1:n Water Storage). Each item needs a copy of a blank re-formatted worksheet appended to the end of the existing data-type worksheet. For example: Water Source #2 is appended to the bottom of Water Source #1 on the same worksheet.
Currently, I am opening the blank re-formatted workbook each time an additional variable of same type is found in the source file. Meaning, if there are 8 Water Sources, I am opening and closing the blank re-formatted workbook 7 times to copy a blank Water Source to the bottom of the Water Source worksheet and then populate the data. AND if there are 3 Water Treatment, I would open and close the blank formatted workbook 2 more times to copy a blank Water Treatment to the bottom of the Water Treatment worksheet. The same goes for Water Treatment.
Obviously, a huge waste of resources and performance. I would rather open the blank re-formatted workbook once (first time an additional worksheet is needed), use the worksheets as needed, and close it at the end.
Attached is my current, working code of the above.
How should I re-write it to check if the blank workbook is already open use it, if not open it?
Code: Sub Add_Facility(ByVal Worksheet_Name, Copy_Range, Max_Limit) Dim Last_Row As Integer Dim Source_Range As Range Dim Dest_Range As Range Dim wkb As Workbook
I am trying to educate myself in the wonders of Excel (2003) and an struggling somewhat.I have a small project loosely based on a shops stock control and have attached a copy of the workbook -
The user normally only has access to columns B, C and E due to the others being locked and the sheet protected.I would like the sheet to be automatically sorted based on column E each time the workbook is opened.I then need to automatically delete a row once an item in column B has been removed (made blank)
I have an external .xls file I'd like to copy to a new directory from within VBA. I know how to create the directory, but is there a way to do it other than opening the required file, and doing the " saveas" thing?
I have a range named "start" and I have a form named "fMenu". I have used this same code in other spreadsheets to have the userform automatically become visible when the spreadsheet is opened and it works in other workbooks. Apparently I have been struck with the stupid stick this morning. I have a hotkey of "M" and when I use control M the form shows up and the macros invoked by each button on the form are working properly.
Sub open_menu() Application.Goto "start" fMain.Show End Sub
I was wondering if anybody could catch an error in the following code. I have a file, let's call it a "Guide" which is opened by user and at this time this file has only one purpose - to help user choose the program. After clicking on the "Choose Program" command button, an Inputbox appears where the user types in a program. Then the code should open the file with this program and this is pretty much it. But something is not working with the code below, and I do not see anything wrong with it after looking at it for so long. It just does not do antthing. how to handle the "Choosing" option
Private Sub CmdBttn_ChooseProgram_Click() Dim sFilename As String On Error Goto ErrorHandler sFilename = "Approval_" & Application.InputBox("Input Program") Workbooks.Open Filename:="C:Documents and SettingsjsmithDesktop" & sFilename & ".xls" ErrorHandler: 'if file name does not exist error message should display. Not defined yet End Sub
I need to combine AHK and Excel, and in this I came up with the solution to save my parameters in a file, and let the workbook autoload it when I open the workbook. To do this I need to pass a command line parameter, or working directory to the workbook, as I will be using many different work directories for this to make sense.
This is only a matter of how to execute my workbook so that the path is included (and usable) to the working directory
I have tried
..workbook-name.xlsm /p "workdir"
But it results in a "grey" version of Excel aka. Excel is open, but no workbooks are.
I have also tried
excel.exe workbook-name.xlsm /p "workdir"
But this did not work either, and is not an option as we use both 2007 and 2010 at my workplace where this is intended to be used.
I can do it very easily by using absolute paths in the Excel auto-load, but as I have explained already this is just not an option.
I m not able to use the standard Excel Paste Special function when I copied a range of cells in another Excel workbook opened in a separate instance of Excel. Instead, Paste Special thinks that I have copied some non-Excel objects and gave me the Paste As options. This is not the case if I open both workbook within the same instance of Excel. Could you share with us if there is a trick to trigger the normal Paste Special options in such situations (without having to invoke Macro procedures)?
All i did was i just created a form to open a workbook from the directories.
Code to copy the data from that recently opened workbook to my workbook where I have my forms. I need to copy that data as in the case that i don't know the workbook and the sheet name i'am going to open as i may open any of the files!!
I have an open workbook (A) and this is where the code should reside. I want to use VBA to copy the content of an entire worksheet from a closed workbook (B) to an existing worksheet in workbook A. How would you accomplish this?
How to Automatic open others Workbook when we opened the Master Workbook. Examp.: I have a workbook (Master.xls), and when this file be opened, and then others workbook (Transactions.xls, Order.xls, etc.) is opened too.
I have a workbook that is a formatted report that I need to insert data from a name variable "CSV" file. I have created a macro in this workbook that calls an "Open" dialog for CSV files that I can use to browse to and open the source file. The macro then is supposed to "select all" copy and close the workbook then make the original workbook active and paste the data starting at row 2. The macro "seems" to be working perfectly except when I do the open the macro then makes the original workbook active, selects all copies then wants to close the original workbook. How can I tell the macro that the csv file that I just opened should be the active workbook, baring in mind that the name won't be known before the time it's opened so I can't hardcode the "active. workbook (NAME) "route.
Opening it manually the dates in column C are all consistently date numbers. i.e. using the =ISNUMBER() function to test them, they all return True However when I include the VBA instruction:
I would like to have a message box pop up when a file is opened requiring a user to enter information (Name), that would then put this name into a cell for later use when they are printing.
I have excel vba code to open .xls files on my server. Files to open are chosen by the user via a UserForm within my app, it shows them all their files in their directory on my server. How can I open their files (.xls) that they select but DISABLE the VBA from being able to run/execute, if they have any attched to the file?
I now have all code in place to open the file no problem, I just need to know how to disable the VBA part from being "turned on" when the file opens.
I run a macro which runs saves the active file to a different location to ensure that I retain the original like so -
If ActiveWorkbook. Name = "KEY_DATA_CFT77" + ".xls" Then ActiveWorkbook.SaveAs Filename:= _ "H:HOME imcEXCELKEY_DATA_2006KEY_DATA_2006_01KEY_DATA_CFT77_01.xls", FileFormat:= _ xlNormal, Password:="", WriteResPassword:="", ReadOnlyRecommended:=False _ , CreateBackup:=False End If .................................
the small code i'm writing just needs to do the following:
1. open an .xslx file selected by the user 2. copy 2 worksheets from that file to the current one 3. close the selected file without saving it.
This is my code:
VB: Sub GetData() MsgBox ("Please select a file"), vbOKOnly Master = Application.GetOpenFilename(FileFilter:="Excel Files (*.xlsx), *.xlsx", Title:="Please select a file")
[Code]....
Opening the file works, but the last 3 lines don't because i don't understand how to declare "Master": however i dim it (workbook, object, variant...) i get an error on the GetOpenFilename line. If i don't declare it, i get an error while trying to copy the worksheets.
The Macro asks the user to point at the location of a report, it then copies information out of that report and pastes it into a master sheet. The part I am having trouble with is closing the file that data has been copied from.
can group all opened file in 1 excel tab instead if many tabs? open thru window the file u want... http://i12.photobucket.com/albums/a209/tancfc/11444.jpg http://i12.photobucket.com/albums/a209/tancfc/fhfh.jpg
right click on task bar > properties > under Taskbar Appearance, select Group Similar taskbar buttons > is not my answer
While opening one Excel file I get an error message saying that a 2nd file could not be opened because it cannot be found. I do not want this 2nd file to open. WHere do I find the "command" that is telling this 2nd file to open.
My requirement, is whenever I open the Excel file, it should open the userform and should not show the excel file at all. And the form is closed, the excel file should be saved and closed.
Also, I need the minimize button on the form and in the taskbar, it should not display the Excel file, it should display only the Userform.
I was working on a tax file yesturday, just a long long list of receipts. and the file is password protected. However, I went to open it today, and I get a message that says: "Filename.xls cannot be opened. the file may be read only, or you may be trying to access a read only location. Or, the server the file is located on may not be responding."
It's on my USB Drive. I've tried copying it to my HD so I can play with a copy, but no dice. When I try that, I get another error message, : Cannot copy Filename.xls. The file or directory is corrupted and unreadable. I've tried the various fixed suggested in the excel help files to no avail. I did a search on the forum, but didn't find anything that seemed to apply or help me. The computer I'm trying to open it on has Office 2003, the one I most recently worked on the file on has office XP. Not sure if this was a source of the problem. Doesn't seem like it should be. Hasn't been in the past. I'm not even getting to the dialogue box asking for my password yet.