I have a range named "start" and I have a form named "fMenu". I have used this same code in other spreadsheets to have the userform automatically become visible when the spreadsheet is opened and it works in other workbooks. Apparently I have been struck with the stupid stick this morning. I have a hotkey of "M" and when I use control M the form shows up and the macros invoked by each button on the form are working properly.
Sub open_menu()
Application.Goto "start"
fMain.Show
End Sub
I have a need to open a file from my companies intranet. My current method was to open said file via the method that the recorder gave me. However, I would like ot be able to open a said file without having to start open another workbook.
This is the path: [url]
So the command is this: Workbooks.Open [url]
Links are not actual links
So what I need to know. Is how can I open this file without opening a workbook. I haven't been able to use the VB "Open Statement" to open a file and I don't believe that I've been successfull using the Filesystem object either.
I have created userform and it works fine. Following code assigned to 'SUBMIT' button in userform - works fine. I am trying to include code where certain data from userform is also copied to workbook2 ( of course without opening it)- as marked in red...below
I've created a simple userform with buttons that perform certain macros.
1. how do i make the userform to pop up every time the workbook is open?
2. i got the userform to pop up via macros menu.. but the buttons doesnt seem to work... could you guys give quick lesson on how to add a macro command to a button on userform?
I have a userform on a worksheet. Now, I open anothe workbook, the userform still stays on top of all the workbooks. However, if I open a new workbook(new instance of excel), then it does not show. I need the userform to be a part of the excel which I open. not for all workbooks.
Few comments before I complete: This was working as intended. All of a sudden, I messed up with the code and it burnt out. Secondly, the ShowModel of userform is set to False as I need to hide the workbook when userform opens. Hence, I cannot set that to true.
I cannot figure out how to get my error handler to work, or actually, not work. It seems to work fine when there is an error, but the code still gets read even when there was not an error. Basically, I am trying to open a file, which may or may not be there. When it is not there I want a message to pop up informing the user. However, when the file is there and it opens, the error handler still gives the message box. Any ideas what I am doing wrong?
Private Sub btnOK_Click() Application. ScreenUpdating = False Dim LCSfile As String LCSfile = frmSelectFile.Listbox1.Value On Error Goto ErrHandler Workbooks.Open Filename:=sPath & sDate & "" & LCSfile & "QUANT.CSV" ErrHandler: MsgBox ("File is not quantitated. Please select another file.") Application.ScreenUpdating = True
I have an external .xls file I'd like to copy to a new directory from within VBA. I know how to create the directory, but is there a way to do it other than opening the required file, and doing the " saveas" thing?
I was wondering if anybody could catch an error in the following code. I have a file, let's call it a "Guide" which is opened by user and at this time this file has only one purpose - to help user choose the program. After clicking on the "Choose Program" command button, an Inputbox appears where the user types in a program. Then the code should open the file with this program and this is pretty much it. But something is not working with the code below, and I do not see anything wrong with it after looking at it for so long. It just does not do antthing. how to handle the "Choosing" option
Private Sub CmdBttn_ChooseProgram_Click() Dim sFilename As String On Error Goto ErrorHandler sFilename = "Approval_" & Application.InputBox("Input Program") Workbooks.Open Filename:="C:Documents and SettingsjsmithDesktop" & sFilename & ".xls" ErrorHandler: 'if file name does not exist error message should display. Not defined yet End Sub
When I open a saved excel file I am having a problem with one workbook opening(a blank one), then the box saying that the program contains macros, and then the second actual workbook opening. I do not know what I changed somewhere alone the line, how to make just the one workbook I want (the second one) to open?
When I open any saved Excel file the saved file opens along with a blank workbook titled "Book 1". How can I make it so when I open any saved Excel file it only opens the file I want and not a new workbook every time?
I need to combine AHK and Excel, and in this I came up with the solution to save my parameters in a file, and let the workbook autoload it when I open the workbook. To do this I need to pass a command line parameter, or working directory to the workbook, as I will be using many different work directories for this to make sense.
This is only a matter of how to execute my workbook so that the path is included (and usable) to the working directory
I have tried
..workbook-name.xlsm /p "workdir"
But it results in a "grey" version of Excel aka. Excel is open, but no workbooks are.
I have also tried
excel.exe workbook-name.xlsm /p "workdir"
But this did not work either, and is not an option as we use both 2007 and 2010 at my workplace where this is intended to be used.
I can do it very easily by using absolute paths in the Excel auto-load, but as I have explained already this is just not an option.
Private Sub CommandButton1_Click() Call ShockwaveFlash1.SetVariable("testVar", "Message B") 'This sets the _ value of the variable in the Flash Project. End Sub
Private Sub ShockwaveFlash1_FSCommand(ByVal command As String, ByVal args As String) Text1.Text = args 'this catches the action sent by Flash, and uses it in the TextBox. End Sub
Private Sub UserForm_Activate() Call ShockwaveFlash1.LoadMovie(0, CurDir + "/vbSample.swf") 'This loads the movie that was made into level 0 of the project. End Sub
(I got from this link http://www.kirupa.com/developer/mx/flashvb.htm) As you can see I have adapted it to work in Excel 2007. Now - when i first run it - the flash file loads and shows in the userform. The only nag being that the .swf file doesnt pass the text into the textbox on the userform. But once i exit the Excel workbook and reload it - the .swf file doesnt show up at all no matter what i do.
On sheet4 is a list of dates and I named that range as UPDATES2013. Each cell in that range is a hyperlink. Sheet1 cell I3 is a data validation list with the named range UPDATES2013 as the list. When a selection from Cell I3 is made I can get it to follow they hyperlink with the code I have. The problem I am having is if there is no file found, then I would like my Userform1 to show. I have tried several different things with the code, but every time I think Im going to get it to work....it doesn't. It either wont show the Userform at all, or it shows it even if the file is found. I am currently putting the code to run the macro on the worksheet module using the worksheet_change event.
One last thing...I also have hyperlinks throughout Sheet1 that will lead to the same files as in the named range UPDATES2013 from sheet4. I need the same thing to happen if they click one of these hyperlinks instead of using the data validation list in Cell I3. Is there a way to make one code that will show Useform1 if a hyperlink is selected and the file cannot be located (whether it be by the individual cells on sheet1...or the data validation list in Cell I3)?Here is the code I am using right now.
VB: Private Sub Worksheet_Change(ByVal Target As Range) DoFollow2013 ActiveCell End Sub [code]....
I have an excel 2003 template containing a userform that is displayed using the workbook_open event.
The userform causes excel to crash with file/path error 75. i have tried many suggestions given on ozgrid and several other forums with no joy.
When the userform crashes, the debugger stops on DataFormNew.show.
I have added stop commands in the initialise procedure to see what is going on and it appears that my userform has disappeared!
to upload the excel template and any other information required to get this sorted. its size is 765 KB which exceeds the size limit to attach to the post.
here is the workbook_open macro:
Private Sub Workbook_Open() 'On Error GoTo MyError 'Call UnProtectAll
'Dim frm As UserForm 'For Each frm In UserForms ' Unload frm 'Next
I have created a template with a form. Now I'm using (the code is in ThisWorkbook)
Sub Workbook_Open() frmMyForm.show End Sub
This runs the form also when opening the template or a saved workbook based on the template. I want the form to run only when creating a new workbook based on the template. How do I do?
I have a file that I save with a new version number each time I make major changes. The file name currently is: "Telephony Equipment Inventory v26 (Summary).xlsm". The "26" is the variable number. give me the vba code to ensure I open the file with the highest version number?
I am using the below code (i have combined different bits of code which i found on these forums) to open a new workbook, copy all the data in it and paste it into Sheet2 in the active workbook . Also, i want the data to be pasted on the next empty row as there is already data in Sheet2. The data that is being copied and pasted has the same format and it is going to be repeated many times.
The problem i am having is that it is not offsetting the data to the next empty row - i think it is a simple change but i can't seem to get there :s
Also, the code is currently selecting all of the data from the workbook that i open - is there a way i can select all of the data, excluding the first row (the first row contains the headings which i already have in Sheet2 in the active workbook).
I have a spreadsheet that data gets exported to from a software program. There is information such as customer name, part number, inquiry number, etc that I'd like to use to develop a log of all my estimates I create for parts. I'd like excel to take the cells I select and insert them into certain cells in the other workbook and automatically save that workbook. This will create a log of all my estimates where I can then link the full estimate to the log. The information will have to go in the next available row. Is there any way I can accomplish this without having to open the other workbook and save the work book each time?
I have a UserForm (UserForm61) where I have a popup calender acts like DTPicker. and some other controls . My Problem is whenever I am trying to open the calender it is opening behind every control. changing the z order played no role.
Private Sub UserForm_QueryClose(Cancel As Integer, CloseMode As Integer) If CloseMode = vbFormControlMenu Then Application.ScreenUpdating = True Unload Me RestrictedOptions.Show Else Cancel = True End If End Sub
Trying to use above code to unload active userform and show new userform when red X (close) selected by operator. With the code as is, the Unload Me leaves the form on the screen and displays the RestrictedOptions form. If i remove the Restrictedoptions.Show, the Unload Me does remove the original form.
