Buttons Not Wanted On Copied Sheet
Nov 4, 2009
I am copying sheet 1 to the back of the workbook and renaming it. I am using a few command buttons on sheet 1 to trigger the copy macro, etc. I do not want these buttons on the copied sheets.
I have done a right click /Format Control/Properties and selected “Don’t move or size with cells” but the buttons are still being copied and still active for the macro. Perhaps due to sheet copy versus cell copy?
I guess I could add select and delete steps to the macro for the buttons but this seems excessive.
View 5 Replies
ADVERTISEMENT
Jun 11, 2007
When i push a button how could i get the buttons text copied to cell? For Example:
If i have button and it's text is TestButton. I push the button and the text TestButton is copied to cell(1,1). How can i do this?
View 2 Replies
View Related
Jul 30, 2009
I'm trying to create a copy of the active sheet and then rename the new copied sheet to what's in cell O4, which is a formula (see below) and then paste value cell O4 in B3 of the copied sheet. However, when I run this macro it doesn't seem to like the second line where I am renaming the sheet (run time error '1004').
"O4" =DATE(YEAR($B$3),MONTH($B$3)+1,DAY($B$3))
Sub NewMonth()
ActiveSheet.Copy Before:=Sheets(Sheets.Count)
ActiveSheet.Name = Range("O4").Value
ActiveSheet.Range("O4").Copy
ActiveSheet.Range("B3").PasteSpecial Paste:=xlPasteValues
End Sub
View 9 Replies
View Related
Jan 10, 2007
I've been trying but excel does not seem to recognise x and y
so here it is
2* X = Z
Where 2 is changable
X = Z-2
Now i just want to find what Z is.
Here's an Example
1.3x - z
1.3(x-.06) = z
1.3z - .078 = z
1.3z = z + .78
1.3z-z = .78
.3z = .78
z = .78/.3
z = 2.6
View 14 Replies
View Related
Jul 29, 2008
I need an error message to pop up if 3 cells contain the same data
The range of these cells would be G19 to G49
Ideally the error message would say "Rules Broken"
Also if possible could the same message be shown if the value of cell J52 exceeds 50,000000
View 9 Replies
View Related
Mar 21, 2009
I have a timesheet which calculates overtime and the sheet works ok. I've had help on this board constructing it and i'm well pleased so far. what i need for it now, is if there is an input cell with no data in it, i want the results cell to stay blank but at the moment i'm getting those horrid hash symbols.
The formula just now is end time minus start time, and from that a 45 minute break is deducted. The break is always the same so i have that in a cell on it's own and the formula does an end minus start, then - the break. What i'd like is when there's no data in the cells, leave the result cell blank...
View 12 Replies
View Related
Oct 20, 2013
with a macro. I am looking to copy row 2 to the last row and past the copied rows directly below the copied contents.
View 9 Replies
View Related
Oct 16, 2008
Macro on copied sheet. I have a macro using the following to bring a shape to the front:
View 4 Replies
View Related
Feb 1, 2008
1. When text is entered into a specific cell in the Master Sheet a new Tab is created named after this text and a second string of text i.e the date.
2.At the same time as this TAB is created I would like only the rows with checkboxes ticked in the Master Sheet to be copied to the new TAB(Not the Checkboxes themselves) [possibly using TRUE/FALSE in "B" row].
3.I would like the formulas, formats of these checked rows to be copied too.
4. Additionally the first 12 rows(all headers) and the last row(subtotal row)should be copied too.
The idea of the Workbook is to have an overall options sheet that is customised on a per customer basis with a record saved on a new tab in the same workbook.
View 14 Replies
View Related
Jun 3, 2014
Data is not getting copied from "Best" worksheet row 129 and row 130 (if more rows then all rows ) to "Crashes for Beast Devices" worksheet in "Missing transactions" sheet starting from row 2 . Every thing is working fine in my code except , the if condition which does not paste the value if the "Missing Transaction" sheet is empty.
Code provided below (the underlined portion does not copies data it seems)-
[Code] ........
Sheet attached -
Best.xlsm
Crashes for BEAST devices.xlsx
View 1 Replies
View Related
May 5, 2014
I'm trying to copy the a name from cell X2...JohnDoe and rename the current sheet with the contents of X2. I'm using the following code and getting my sheet named as "True"
Sub SheetName()
'
' SheetName Macro
'
Dim ShName As String
ShName = Range("X2").Select
Selection.Copy
Sheets.Add.Name = ShName
End Sub
View 4 Replies
View Related
Jan 2, 2007
Suppose I have 100 worksheets in a workbook ( named 1,2 3 ........100) in a collecteve sheet ( I have a coulmn of 100 same formulas refering to the same cell in all the 100 worksheets)
for example :
'1'!$a$1
'2'!$a$1
if I drag the first formula Fill Down With Fill Handle then, the sheet name will be the same all the way down(1) , which is not correct , so I have to go bach and modify them manually , which is very boring and mistakes could easily happen
View 3 Replies
View Related
Apr 11, 2007
How do I copy a sheet into a new workbook without the formulas referring to the old workbook? For example, formulas end up like this: = SUMIF('[BAS05-07to09.xls]IN'!$B$6:$B$62,101,'[BAS05-07to09.xls]IN'!$E$6:$E$62). I want them to come across as I originally had them, like this: =SUMIF(IN!$B$6:$B$62,101,IN!$E$6:$E$62). here are too many to do it manually each time.
View 6 Replies
View Related
Apr 27, 2007
auto incrementing my invoices.
The way I do my invoicing is like this. I have 1 Invoice in a worksheet (eg April 1) When I make my invoice for the next day I right click on the April 1 tab at the bottom. Right click/Move copy/move to end &check the create a copy box. It changes to april1(2)I then right click and change the date to the next invoice date. This might seem goofy, but it works for me. I have my Invoice number at the top of the page in cell e2. Is there a formula to automatically increase the invoice number by 1 every time I copy it?
View 9 Replies
View Related
May 25, 2009
I have written a macro that copies a row to a new sheet and adds a formula to that copied row.
View 8 Replies
View Related
Jun 27, 2009
I have a workbook, 'MyWb.xls' and a sheet with buttons to which I attach some sheet macros. When I assign a macro to a button I pick the appropriate reference, e.g. Sheet2.MyMacro, and this gets recorded by default as MyWb.xls!Sheet2.MyMacro
When I create a new single sheet workbook with the instruction ActiveSheet.Copy, I end up with a new workbook, say 'Book2' along with the buttons as expected. However the macros attached to the buttons still refer to the MyWB.xls file and not the new 'Book2.xls'. As part of the process of creating the new book I've tried redefining the macro with the instruction
View 4 Replies
View Related
Jun 17, 2014
I have a spread sheet with tabs that are for each week of the year. Each tab shows the date on top and times (broken into 30 minute intervals) on the side; the inside has information like an event on the inside.
My goal is to keep that information there and to have a "master sheet" that holds all this information in a list format so I can filter out some information.
View 1 Replies
View Related
Feb 6, 2009
The macro below in its current state adds data entered from the userform to a specific sheet. I would like to change it so that a player can be selected from combobox named txtmplayer and the data entered be copied to that specific players sheet.
If this information is vital: There are 8 players. Player sheets can be named player1, player2, and so on. I would like to keep same method for entry (finds first available row)
View 7 Replies
View Related
May 22, 2009
I have two worksheets in one document. On sheet 'M_Admission' there are numbers for each week. can those numbers be automatically copied to the correct cell on sheet 2 'M_Actual' See the attached Excel worksheet to see what I mean. (Excel 2002)
View 3 Replies
View Related
Apr 11, 2007
The data from the Data sheet is copied over to the Report sheet with formula.
Basically, what I need to do is If statement:
-when there is no any data in csv file (so the Data sheet will be empty);
-the range (A7:N1000) to be hidden (on the Report Sheet)
-the Report sheet to be saved
and also...
I would like to ask, how to select from the Data sheet, the rows with Data only. I copy them over with formula instead of macro- but would like to hide all the empty rows on the report.
Option Explicit
Sub Update_Report()
'
' Macro1
Dim extract1 As String
Dim dReport As String
Dim rSheet As String
Dim dSheet As String
extract1 = "LeadSheetAll_0001.csv"
dReport = "Appointments.xls"
rSheet = "Report"
dSheet = "Data1"
Application.ScreenUpdating = False
Application.DisplayAlerts = False
View 9 Replies
View Related
Jan 31, 2012
I have a macro that saves a sheet to another workbook. However, that sheet contains buttons with macros, so when saving to a new workbook, the macros get copied over.
Is there a VBA code to delete all of the buttons on a sheet? I can't name them individually, because for some reason, excel changes the name of the button between the sheet and the new workbook.
Is there a generic code to delete all buttons?
View 3 Replies
View Related
Aug 30, 2006
I'm going to be creating a workbook that contains a worksheet for each year. Within each worksheet, I will have a calendar format that contains a range for each month of the year (multiple columns and multiple rows). Is it possible to name areas based on month and then create a button or drop down list at the top that would allow users to select the month and the view would go to that area within the calendar?
View 2 Replies
View Related
May 20, 2014
I have a spread sheet and I want to have multiple option buttons on it. but for separate things
e.g. I need roughly 50 option buttons. however. I want about 25 groups of them.
so I want 2 buttons next to a cell where user can select one. then I want 2 more on cells below where user selects one for a different question
but at the moment, every single option box copies every other box when I changed the format control cell reference. even though I haven't copied and pasted them!
View 9 Replies
View Related
Jan 13, 2010
I have I command buttons on the sheet and when I delete a row, the postiion of the buttons is changing. Can I make it somehow so they never move when I add or delete rows?
View 2 Replies
View Related
Aug 5, 2009
HOW TO SET FLOATING COMMAND BUTTONS in sheet which fixed at top or bottom of the screen not fixed at cells
means while scrolling a screen it should look like fix at bottom of the screen
View 6 Replies
View Related
Aug 6, 2008
I have a pair of radio buttons on an Excel 2007 sheet. I want the buttons to be clickable, but have the sheet protected.
Both are defined as unlocked. The Group containing the two buttons is also defined as unlocked.
But when I protect the sheet, one of the two buttons gets the pop-up saying the cell is protected - the other button is fine. I've even tried unlocking the cells behind the buttons, but it still pops up.
View 9 Replies
View Related
May 9, 2006
I have two macro buttons on a page that hide and unhide columns. When I got to protect the sheet .. the buttons no longer work and ask me to DEBUG. Is there a way to have macro buttons performing tasks AND have the sheet still protected?
In the protect sheet window .. am I have ticked is
Select Locked Cells
Select Unlocked Cells
But these are ticked as a default.
View 2 Replies
View Related
Jul 21, 2006
I am using VBA to copy and paste the entire contents of a worksheet into a new sheet. However I have a button that I put on the sheet that needs to move aswell. I got it to move but the event handler for the button
Private Sub CommandButton1_Click()
that is stored on the first sheet and not copying with the button. Is it possible to copy code from one worksheet to another (or maybe store the event handler somewhere else?)
View 2 Replies
View Related
May 4, 2007
I have a spreadsheet containing a group of Macro Buttons, each button has been assigned a macro that enters specific text in the selected cell when the button pressed.
But as you scroll down the sheet, the group of buttons is left above. Is there a way to make the buttons scroll down (or up) along with the spreadsheet ?
View 9 Replies
View Related
Oct 14, 2009
How do I Enable/Disable Command Buttons from a Sheet?
I am using a Command Button in a Sheet to copy and paste the Data from one Sheet to another with the help of macro..
As I am not well-versed with VBA dont know all the syntaxes of VBA.
I need help for the command button..
First and Foremost, I double click a Command Button form the Control tool-box and paste it on the Sheet, I dont know how to get the name of this command button , I mean where do i get it?
Based on a condition like a value in a cell I want it to be Enabled and Disabled?
Any ideas...please I am not able to follow even after googling a lot as I dont know what's the name of the command button control I have used.
If the value entered in a particluar cell is more than the 1000 difference between two cells then the command button should be disbaled...
The Application part:
The command button is used to transfer the data in a cell lets say $I$4 to another sheet Cell J2,J3,J4 so on so forth..by incrementing the ROW number.
Now The balance gets depleted with every new Debit Entry and we need to disallow the user from entering such an amount which will reduce the balance more than The Minimum Account Balance of a bank...
View 14 Replies
View Related
