I have a timesheet which calculates overtime and the sheet works ok. I've had help on this board constructing it and i'm well pleased so far. what i need for it now, is if there is an input cell with no data in it, i want the results cell to stay blank but at the moment i'm getting those horrid hash symbols.
The formula just now is end time minus start time, and from that a 45 minute break is deducted. The break is always the same so i have that in a cell on it's own and the formula does an end minus start, then - the break. What i'd like is when there's no data in the cells, leave the result cell blank...
I am copying sheet 1 to the back of the workbook and renaming it. I am using a few command buttons on sheet 1 to trigger the copy macro, etc. I do not want these buttons on the copied sheets.
I have done a right click /Format Control/Properties and selected “Don’t move or size with cells” but the buttons are still being copied and still active for the macro. Perhaps due to sheet copy versus cell copy?
I guess I could add select and delete steps to the macro for the buttons but this seems excessive.
1. When text is entered into a specific cell in the Master Sheet a new Tab is created named after this text and a second string of text i.e the date.
2.At the same time as this TAB is created I would like only the rows with checkboxes ticked in the Master Sheet to be copied to the new TAB(Not the Checkboxes themselves) [possibly using TRUE/FALSE in "B" row].
3.I would like the formulas, formats of these checked rows to be copied too.
4. Additionally the first 12 rows(all headers) and the last row(subtotal row)should be copied too.
The idea of the Workbook is to have an overall options sheet that is customised on a per customer basis with a record saved on a new tab in the same workbook.
Not sure where the best to ask this is so i'll do it here.
I have a h:mm time which i need to get converted into days/hours/minutes, creating an on the fly phrase of something like "2 days, 4 hours, 32 mins" for example.
eg: 26:45 (hours/minuts) to be converted to "1 day(s), 2 hours, 45 minutes"...
it works well unless the staff member works past midnight. I get a negative hours worked value returned.
for eg
E4=8AM and D4 is 5PM i get an answer of 9 hours in F4, this is all good but if the start time E4=4PM and the finish is D4=1AM then I get the result of -15 hours in F4
I have a system that enters the ID in the first column, the date and time in the second and third columns and the sense (IN/OUT) in the fourth column, for each employee that enters/exits the premises. Note that not only the in /out can occur over midnight, but also I have the situation of having two periods of the same employee in the same day. The objective is to obtain in some way a daily report for each ID (employee).
I am trying to make a timesheet in Excel 2007 with a formula.
I want it to read: IN = 8:30 AM, OUT = 11:30 AM, IN = 12:30 PM, OUT = 4:30 PM
The total hours will be 8 because there is an hour for lunch.
And if I work a few hours one day and leave before lunch, I want the calculation to be right. I found a formula but it wouldn't add the lunch hour and I added a +1 in the formula but it makes the calculations wrong for when I work for only 2 or 3.
When people enter their hours I get them to do it in 24hr format, fine. BUT my problem is coming when I'm working out wages etc. I can get the user to enter 09:00 (start time) and 17:30 (end time) but then the cell works out the hours (cell 2-cell1) gives 8.30 in time format when I need it to show 8.5 (total hours worked) This means when it goes to work out wages, it takes 8.5*hourly rate not 8.3!!
I have made a work schedule for my local business and have set up a series of formulas that will fill out time cards that I could print out directly onto the paper time cards. The formulas that I have work except that if there are two subsequent entries that later will not return a value and result in an error.
If you could take a look at it that would be awesome. To use it you just need to type a name into the name column and a work time into the time column for that day. then in the other sheets( one for each worker ) it will set up the time card. The the error happens on Thursday, when Bob has an entry right after Fred. Then on Bobs sheet it gives me a #N/A.
i am creating a weekly time sheet for my company.the problem that i have is when the persons time reaches 40 hours, the time needs to be calculated in the overtime field. this is really tough for me when the person reaches 40 hours in the middle of the work day. I cant figure it out. i have attached the spreadsheet if you would like to look.
I have an Excel timesheet, and I am wondering if there is a way to have the timesheet default to PM after 12 noon, so the employees dont have to put in PM, they would just put their time and the sheet would default it to PM.
approach to sort out Day/Night Hours. Its bomb proof!
A new situation demands overtime payments......start and finish time can be any time day or night (crap job!), overtime is payable after 8 hours. Thus I have day (0600-1800) standard rate, day (0600-1800) overtime rate, night (1800-0600) standard rate, night (1800-0600) overtime rate.
So, starting at 1400 and finishing at 0100 give 4 hours day std + 4 hours std night + 3 hours night o/time; whereas starting at 0200 and finishing at 1300 gives 4 hours std night + 4 hours day std + 3 hours day o/time.
I'm using Excel 2003 and 2007 so use the Excel 97-2003 format.
Start Time, End Time, Break, Hours Worked. Then on the right hand side of my spreadsheet I started playing around with the current time etc.
I want to work out the time left in a working day(like a countdown), based on a variable number of hours of work in a day (here it is 7 hours) excl. breaksie. 7+breaktimeso I need 7+break - 'hours worked' to get hours and mins left I worked out how to get hours worked easily enough,
=J58-LOOKUP(TODAY(),A:A,D:D)-LOOKUP(TODAY(),A:A,B:B) where J58 is a cell that has the current time in it and D and B are the columns with the break time and start time in them.
I need to keep track of my salesmen's time. However, the company will not pay for the first 45 minutes so I need a formula that says, if the time entered in under "worked" is less than 45 minutes, no time will be deducted. If the time entered is equal to or greater than 45 minutes, 45 minutes will be deducted. These are the columns needed and the Daily Hours would be the total of all the previous columns. WORKED TRAVELED LUNCH DAILY HOURS
As per attached spread sheet in the yellow highlighted cells, I am trying to input a formula to automatically calculate the hours between specific times for shift workers so I can easily calculate their penalty rates however I just cant seem to get it to work, the main issue being midnight.
I thought I had everything worked out with this timesheet but I've discovered one more problem.
Weekly Timesheet.xlsx
The total overtime hours needs to show that anything over 40 hours in the Total Regular Hours cell is overtime. And it also needs to show only up to 40 hours in the Total Regular Hours cell.
I am working on a spreadsheet to track hours worked. It is an 8 hr day. I want there to be a running total, but when less than 8 hrs are worked and the total goes below 8 hrs per day (as in when you have no "banked time" it will not display negative or owned time. Also, it doesn't seem to want to skip over the weekends for me.
I have made a time sheet and am trying to have the total hours and grand total- round up to the nearest quarter hour, I.E. (.25, .50, .75. 00), if anyone can help me please it will greatly be appreciated, this is what i have now, in my totals fields:
Basic Hours Worked Overtime Hours Worked Day Time In Time Out Hours Worked Time Decimal Lunch Hour Number of hours
Mon 8:56:00 AM 4:50:00 PM 07:54 7.90
[Code] .......
To determine the hours worked from the times input I am using the following formula:=
HOUR(D65)+MINUTE(D65)/60
These formulas seem to be working fine but what I am stuck on is deducting and adding lunch hours and overtime hours.
The first problem I have is for example if an employee were to type the figure 1 in the Lunch Hour column for each day lunch is taken I would like it to be subtracted from the bottom total.
Also if any overtime were input on any day I would need it added to the totals.
I am trying to figure out a formula that will provide the following results for time worked. (This is contract work that is billed in 1/10 hr increments.)
1 min - 5 min = no charge (rounddown to 0 min) 6 min - 11 min - rounddown to 6 min 12 min - 17 min - rounddown to 12 min.
or
1 - 5 min are billed at 0 hours 6 - 11 min are billed at .1 hour 12 - 17 min are billed at .2 hours
B15 = start time, C15 = end time, G15 = billable time in 1/10 hrs
On Error GoTo importError For Each b In Range("names") If b = FILE.Sheets("Sheet2").Range("e3") Then ThisWorkbook.Activate ThisWorkbook.Sheets("Sheet2").Select b.Row.Value = n For Each c In Range("dates") If c = FILE.Sheets("Sheet2").Range("e5") Then ThisWorkbook.Activate ThisWorkbook.Sheets("Sheet2").Select c.Column.Value = m ActiveCell = nm Set Targ = ActiveCell Targ = system Targ = FILE.Sheets("Sheet2").Range("e20")
End If Next
It doesnt work, it gets to b.row.value and throws up an error, i realise im using the wrong code but I dont know enough vba script to resolve the issue
I have a timesheet and a data base spreadsheet, the db spreadsheet opens the timesheet (many, one after another) and I want it to look for each name in the db and if the name cell on the timesheet it has open matches then i want it to remember the row value (on the db), then look through the dates in the db until it finds the matching date to the one in the timesheet, i want it to store this column value (in the db) so I can concat the row and column to get the activecell where I will be putting the total hours (a single cell reference) from the timesheets into the db.
I’m trying to take an existing employee time sheet in Excel (Office XP) that has no formulae whatsoever, and add the appropriate formulae so that all an employee needs to do is enter the daily start and end times and the time sheet will calculate daily, weekly, and overtime hours worked. Among others, some of the problems I’m having are:
I need to keep the original format (though I've added a few columns).
Overtime in the State of Texas does not apply until after 40hrs have been worked. Then any daily hours over 8 can be applied retroactively. So I need a timesheet that shows overtime as regular hours worked until 40 hours have been reached, then separates the daily overtime from the regular column and places it in a daily overtime column. Shouldn't be too hard to find...Right?... Actually, that’s been quite easyexcept for weekends. Saturdays and Sundays are usually overtime but not always.
The real problem is the beginning day of the pay period, if a pay period begins on any day other than Monday (Wednesday, for example,) then weeks one and sometimes three can never equal 40 hours each unless the assumption is that the days worked in the same week but prior or subsequent period are worked at 8 hours each. The formulae must make this assumption. How do I write a formula that assumes an empty cell actually has a value? :o
I know that it’s difficult (if not impossible) to offer any suggestions without seeing the time sheet itself, so, If it would be helpful, and anyone has any suggestions. I’ve uploaded the week one of the timesheet as it stands now.
If you'd like to see the entire worksheet I've uploaded it to ....
I am working on a project involving calculating time. It is a timesheet calculation. I was able to design the following layout:
.....A............B..........C..........D.......E.....F 1....Date.........Time IN....Time OUT...Hours... Total 2....01/01/07.....1830.......1930.......01:00...01:00 3....01/02/07.....1930.......2330.......04:00...05:00 4....01/03/07......830.......1900.......10:30...15:30 5 Column A is formatted for DATE. Columns B and C are GENERAL. Columns D and E are DATE format customized as '[hh]:mm'
The formula to calculate the time difference between the numbers in column B and C is located in column D. It is as follows: =IF(C4<1000,TIMEVALUE(LEFT(C4,1)&":"&RIGHT(C4,2)),TIMEVALUE(LEFT(C4,2)&":"&RIGHT(C4,2)))-IF(B4<1000,TIMEVALUE(LEFT(B4,1)&":"&RIGHT(B4,2)),TIMEVALUE(LEFT(B4,2)&":"&RIGHT(B4,2)))..................
I am trying to create a timeline spreadsheet for a weekly radio show I produce. We have 3 segments and the total time of the 3 must add to 59 minutes. Within each segments there are numerous variables with a certain time value. I am trying to figure out how to have time reduced correctly. For Example
Segment 1 Story A 5:00 minutes Story B 4:30 minutes Story C 3:00 minutes
What I need is Segment Total (A+B+C) in one cell and Remaining time (from total 59 minutes) in another. I know this may seem silly for most of you, but I cannot get the cells to format properly at all.
I am using the code below (Excel 2007) to delete and add back timesheets based on a list of names from the "Names" tab. In addition, I am making a "Table of Contents" with hyperlinks on a separate worksheet that will allow employees quick access to their timesheet without having to look at each tab. The code below works well if I want to delete and add back all the timesheet at one time but if we get a new employee in the middle of a pay period I have to use a single timesheet until the end of the pay period.
What I would like to know is, can the code below be modified so that when the code is run it reviews the list of names and only adds a new timesheet for that employee without deleting and adding back all the timesheets?
