Whilst I was searching through the channels on telly the other night I came across a 'Quiz Call' channel where you had to add ALL the number within a certain sum (see sample) Sixteen minus five times seven multiply by nine add twelve
You not only have to do the sum you also have to add in all the less obvious numbers like the Six within Sixteen, plus also all the Roman numbers in each word like the I, X, & IX within the sixteen. I've done a small example to show what I mean, but I don't have any idea how to create a formula that will add up all of all of the permitations of roman numerals within each word.
By "Return all row numbers that have a given value written somewhere inside text in their column B" I mean....
I want to be able to search an alphanumeric value "ABC12345" within a column that has a paragraph of text written in each row, I want to know which rows have this value written somewhere in them and have it return 2,4,33, as row 2 and 4 and 33 have this value in them inside column B on that row.
on column A i have the respective row numbers all the way down ie: ( 1,2,3,4, etc) (to pull up the row numbers)(unless you have a better way)
On Column B i have the paragraphs of text to search in (there is lots of text and spaces in the paragraphs.)
On column C i have the value to look for... ie: ABC12345 (different values in each row of column C) to be compared to all of column B
On column D would be the formula to Pull down and get the results.
and something tells me you might have a better way of getting the row numbers rather than having column A dedicated to numerating each row 1,2,3,etc
1 paragraphs of text look for it's found in row #
2 anything can be written here and might have ABC11112 DDD77777 4
3 anything can be written here and might have ABC12345 ABC55555 5,6
4 anything can be written here and might have DDD77777 BBB11111 Not Found
5 anything can be written here and might haveABC55555 ABC11112 2
6 anything can be written here and might haveABC55555 ABC12345 3
Month, Loan(left), Interest Februari, =above-Instalment, =X%*Loan(left)/12 (rent is divided per year),
Instalment, Total payment Constant, =rent+Instalment
and so on... as long as you want ^^ (it's quite messy, but try :D)
The question is as follows "What would a loan of 900'000kr with 9% interest rate totally cost over 30 years?"
[use "IF" to avoid getting anything written after the loan expires]
The question itself can be easily solved by just dragging the formulas down to 30 years and fill in the % and loan etc. But what I do not understand is the "IF" question. I'm supposed to use the IF function to instantly show the cost of the loan (total rent payment) after the 30 years? That's how I understood it. In that case... how do I do that? ^^
This is a a formula entered in a checkbook program for excel that I downloaded. But I want to use my current accounting spreadsheet to print checks. The problem is I don't know how to get excel to write out a number like $23.40 as:
Twenty Three & 40/100
Does anyone know how this is done? Is it something simple that I am overlooking - i can't find anything like this in the number formatting section of excel.
I have a work sheet with multiple columns and rows. In one column there is unique number which is appearing in multiple rows but it is appearing in different rows more than once like this:
ColumnB KA0012 KA0012 KA0013 KA0013 KA0013
Now i want to calculate this e.g KA0012 appearing twice as one number similarly KA0013 appearing thrice as one number how can i do it?
I am trying to generate a formula that will add the last 17 cells over 25 cells worth of data. If there is nothing entered in one of the cells then the formula should add the next cell.
i.e. column Z needs to add A1:Y1 but only add the last 17 cells that have a number in it so this should add I1:Y1 to give 17 cells worth of data. BUT if for example L1 and P1 are zero, then column Z needs to add G1:Y1, still giving 17 cells worth of data.
I am calculating totals off a meter that roles over at 999999. Is there an easy way to have it auto calculate the total if my beginning reading is 994419 and my ending reading is 002146.
I'm using sum to calculate numbers can I modify it not to calculate numbers? like it'll return blank or something else. Because it calculates alphabets in a row and returns a 0.
tSumthing = "=SUM(RC4:RC[-1])"
then based on the 0's I got above, it'll delete the row. I got diffculty modifying the formula below. Columns(1).SpecialCells(xlBlanks).EntireRow.Delete
It is quicker and easier for me to enter times as whole numbers.
I tried to Catinate the number and enter the ":" in the middle. Example I enter 815 and then =":" &RIGHT(a1,2) and get :15 but how do I add the 8 and convert the new number to time?
I want to convert the number in a cell, G7, from a whole number into a decimal and then divide that decimal into a whole number in cell E7 and give me the quotient in cell E8.
I really didn't want to create this thread, but this is really bugging me and I have had asked for assistance with this. I have tried to bump this in March and again last week, I have given more than 48 hours for a response, but I am seeing that the view counter is increasing so slowly, it was at 84 when I 'bumped' and I am not sure if someone is able to help me as the thread is moving further down the line.
I have not had any trouble with what I have used in over a year, I have had used Vlookup religously for 2 years, and for the last 3 months, I have encountered this problem. Didn't think anything of it the first time it happened. It was explained that there was a space in the cell, which is why the formula did not find it. What's strange is that it only happens on one cell. I haven't determined if it is the exact same cell reference, but I am researching that.
The formatting is the same, in both sheets. Is there some way to vlookup look up the value of the contents as seen?
I have a formula that will give me a phrase that I need to be able to paste into other applications - the value and not the "mid"s and the "search"s, etc. So, can anyone tell me how to take that formula's value and write it to the clipboard?
I wrote out a long IF statement in Word, but when I pasted in the formula bar, I got an error. I've determined that the quote marks are causing the error. Can anyone advice how to fix this going through and changing the quote marks one-by-one?
I have value1, search value1 in a row, if found get cell address and store in cell10. Then value2, search in the same row, if found get cell address and store in cell11. Then calculate number of rows between cells with addresses in stored in cell10 and cell11.
How do store the addresses and how to calculate this number of cells?
I am trying to find a formula to calculate the percentage of the positive numbers in a column. For example, if I have a column that has positive(green) numbers and negative(red) numbers in the cells to show over daily goal or under daily goal, and I want to at know what percentage of all the numbers are the positive ones.
Background: I play a game that requires 5 members to play, however you can have more then 5 members on the team. In order for a player to receive points for playing they must have played at least 30% of the total games played. The problem for me is when trying to figure out how many games someone needs to play to get to 30%, the total goes up as they play those games.
What I would like to accomplish: I'm looking for help on a formula that would figure out how many games a player would need to play to get to 30%. I have a column that is total games played, %of games played by player, games played by player, and games needed to play to get to 30%. Basically the user would enter the # of games played by each player, and the total games played overall for the team for that week, the spreadsheet would then show the # of games each player that isn't above 30% would need to play.
I tried to make the question as clear as possible, if anyone needs clarification,
Originally Posted by shg Welcome to Oz, Basca
spreadsheet with a representative sample of your data?
Games Played Player 1 20 Player 2 7 Player 3 13 Player 4 20 Player 5 13 Player 6 13 Player 7 7 Player 8 7
I wish to write an "IF" formular to express a row of numbers in the way I wish to display them in accumulative fashion. 1 upto and including 9 = 1% ...
I have done is created an Officer Evaluation Form in Word for my Police Chief and the Scores for the different observations are: N/A, 1, 2, 3, 4 and 5. If for example there are 4 observations and one of the observations is "N/A" for not applicable or not observed and the rest are all 5's I want the formula to ignore the field(s) with the N/A and still come up with an average of 5. The way I have it set up now which is: =AVERAGE(KOW1,KOW2,KOW3,KOW4) it comes up with an average of 3 when I put a N/A in field KOW1 and all 5's in KOW2-KOW4.
Is there any way to a column be filled automatically by what is written on others columns.
Example: If one of the cells A2 or B2 and C2 are Nonblank, fills automatically the cell H2 with "ABC2" And If some of the cells D2 and E2 are Nonblank fills the cell H2 with "DE2"
The script below writes a ".csv" file to the same directory that contains the workbook the macro, "foo" is run from. I'd like to change the script to always write the file to a separate directory which is: "c:etcupload".
I've written a macro and i've added a button to the toolbar so that it's easy for users of the spreadsheet to run the macro. the problem i'm running into is that the sheet that the macro's written in is a template. the macro formats some downloaded junk. soooo, every time someone downloads stuff, they copy-paste into the template, push the button, and it formats it.
my problem is that when they Save As, the button's assigned macro gets reset to the name of the file they saved as. therefore, when someone else comes along and press the button, it doesn't run the macro out of the original template sheet which they have open, instead it tries to find the last sheet that was saved and run the macro through it.
Is it possible to add text to individual cells which can be written over?
e.g. I would like A1 to have the background text of "slot 1"... Once user has inserted text then "slot 1" is removed... and when the user text is removed, "slot 1" reappears.
I am using the following code, slightly modified, written by Tom Urtis.
I would like to enhance the code such that it will filter on two criteria to enable more specific results to obtained e.g. from the possibilities below I would like to get "Jones Manchester".
Data list:- Jones Blackburn Jones Liverpool Jones York Jones Manchester Jones London EC1 Jones London N12
Private Sub Worksheet_Change(ByVal Target As Range) With Target If .Address "$D$1" Or .Cells.Count > 1 Then Exit Sub ActiveSheet.AutoFilterMode = False If Len(.Text) > 0 Then Dim myVal$, myVal2$ myVal = .Value myVal = "*" & myVal & "*" If WorksheetFunction.CountIf(Columns(1), myVal) > 0 Then
I am creating a financial summary on a worksheet and I want to be able to write up a summary about each category. Is there a way that I could write text on my worksheet and create a parameter where my text could go to the next line such as a word document?
creating a MSG box to be placed at the start of the code, i need the following reminder statements written in the message box. If the answers to all statements is Yes then proceed running the code.
1. Is the value date in Sheet Summary Correct? 2. Is the workbook free of errors, check sheet "Errors" 3. Are all the graphs up to date?
Sub Save_File() Application.ScreenUpdating = False Sheets(Array("SUMMARY")).Copy With ActiveWorkbook .Sheets("SUMMARY").Cells.Copy .Sheets("SUMMARY").Cells(1).PasteSpecial xlPasteValues .SaveAs Filename:="S:Recsdata ReportingRec StatsSummary Stats" & Format(Date, "yyyy\MMM") & _ "Stat Summary_" & Format(Date, "dd-mm-yy") & ".xls" .Close False End With Application.ScreenUpdating = True End Sub
Is there anything in Excel 2007, the spreadsheet and written data are tangled lists of numbers and its hard work sorting it out? So something like highlight current row and darken others and tick each correct row with one click would help a lot.
