I have a need to work out a scaled trend 1 - 10
for example if I have the following data set:
Sales
Jul-12
Aug-12
Sep-12
Oct-12
Nov-12
Dec-12
Product A
37
28
9
10
3
3
[code]....
Calculate the intensives to be paid to a loan officer based on the number of cases he brings , according to the following :
the first 10 cases 0
from 11 to 15 cases 6 pounds
from 16 to 20 cases 8 pounds
from 21 cases to more 10 pounds
so I need to put the total number of the cases , the loan officer brought in one cell, and this value to be processed and splitted to the segments above , and multiplied with adjacent pounds sums , and finally calculate the total of theintensive to be paid.
I need a formula to calculate a linear sliding scale from 10%-30% (no higher, no lower). Based on the data in the below chart, if the GROR (let's say this is known and the result resides in cell A1) is less than or equal to 0.0% the payout % is 10.0% and gradually increases as the GROR increases.
The payout % is capped at 30% which is if GROR is 18% or greater. Below are just some examples of how certain thresholds should calculate.
GROR 0.0%5.0% 8.0% 11.0% 14.0% 18.0%+
payout %10.0%10.0%14.6%19.2%23.8%30.0%
I am trying to set up a spreadsheet where all the sales manager will have to do is input the number of cars sold to determine what the total amount of commission will be for a salesperson. I have something set up so far, but need the spread sheet to do an if/then type thing where it will search the table, and produce the dollar amount for the number of cars sold based on the scale and the number in the # cars sold cell.
I've tried conditional sum, IF, goal seek, and all kinds of stuff to no avail. The spreadsheet is attached.
I'm trying to determine the average of a set of numbers, based on a scale of 1 through 10. There are two columns and it would look something like this:
1 3,452
2 2,990
3 564
4
etc.
I want to determine the STDEV here as well but assume I can just exchange the AVG function with that function, once I know how to tie column B (the numbers) to column A (the rank).
How can we convert time on a scale of 100 to a scale of 60?
View 3 Replies View Relatedi used excel as a calculator but when i needed to make some effort to reach a solution for my problem it let me down, so i will write my problem
i have a record in my data base and i want excel to look if the record is in another range and apply some maths. so i wrote this formula
I have a number of houses & a number of water plants (as in water processing plants, not the green kind!) Each water plant can provide a certain % water coverage to all properties. 'All Properties' is classed as the number of houses + the number of water plants. The 'coverage' as a percentage is given by the formula:
View 5 Replies View RelatedHow to create scenarios where excel will select all the possible ways to sum your data set to a specific number?
Example:
Data Set: (20, 25, 18, 40, 23, 22, 73, 7, 38, 28, 52, 96, 4, 99,2)
Way to create: 100
Answer 1: 25, 73, 2
Answer 2: 38, 2, 40
Answer 3: 96, 4
Is there a function or data structure in order to complete this?
how to calculate the best of three numbers from 5 numbers in a row?
I want to know the exact formula for this.
I have a work sheet with multiple columns and rows. In one column there is unique number which is appearing in multiple rows but it is appearing in different rows more than once like this:
ColumnB
KA0012
KA0012
KA0013
KA0013
KA0013
Now i want to calculate this e.g KA0012 appearing twice as one number similarly KA0013 appearing thrice as one number how can i do it?
I am trying to generate a formula that will add the last 17 cells over 25 cells worth of data. If there is nothing entered in one of the cells then the formula should add the next cell.
i.e. column Z needs to add A1:Y1 but only add the last 17 cells that have a number in it so this should add I1:Y1 to give 17 cells worth of data. BUT if for example L1 and P1 are zero, then column Z needs to add G1:Y1, still giving 17 cells worth of data.
I am calculating totals off a meter that roles over at 999999. Is there an easy way to have it auto calculate the total if my beginning reading is 994419 and my ending reading is 002146.
View 1 Replies View RelatedI'm using sum to calculate numbers can I modify it not to calculate numbers? like it'll return blank or something else. Because it calculates alphabets in a row and returns a 0.
tSumthing = "=SUM(RC4:RC[-1])"
then based on the 0's I got above, it'll delete the row. I got diffculty modifying the formula below.
Columns(1).SpecialCells(xlBlanks).EntireRow.Delete
Whilst I was searching through the channels on telly the other night I came across a 'Quiz Call' channel where you had to add ALL the number within a certain sum (see sample) Sixteen minus five times seven multiply by nine add twelve
You not only have to do the sum you also have to add in all the less obvious numbers like the Six within Sixteen, plus also all the Roman numbers in each word like the I, X, & IX within the sixteen. I've done a small example to show what I mean, but I don't have any idea how to create a formula that will add up all of all of the permitations of roman numerals within each word.
It is quicker and easier for me to enter times as whole numbers.
I tried to Catinate the number and enter the ":" in the middle. Example
I enter 815 and then =":" &RIGHT(a1,2) and get :15 but how do I add the 8 and convert the new number to time?
I want to convert the number in a cell, G7, from a whole number into a decimal and then divide that decimal into a whole number in cell E7 and give me the quotient in cell E8.
ie:312 = 6.0
286 = 5.5
260 = 5.0
234 = 4.5
208 = 4.0
182 = 3.5
156 = 3.0
130 = 2.5
104 = 2.0
78 = 1.5
52 = 1.0
Could this also be done with the entire range of numbers from 312 to 52 and giving decimals of 6.0, 5.9, 5.8 etc.
I really didn't want to create this thread, but this is really bugging me and I have had asked for assistance with this. I have tried to bump this in March and again last week, I have given more than 48 hours for a response, but I am seeing that the view counter is increasing so slowly, it was at 84 when I 'bumped' and I am not sure if someone is able to help me as the thread is moving further down the line.
I have not had any trouble with what I have used in over a year, I have had used Vlookup religously for 2 years, and for the last 3 months, I have encountered this problem. Didn't think anything of it the first time it happened. It was explained that there was a space in the cell, which is why the formula did not find it. What's strange is that it only happens on one cell. I haven't determined if it is the exact same cell reference, but I am researching that.
The formatting is the same, in both sheets. Is there some way to vlookup look up the value of the contents as seen?
Today I have a project as follows:
I have value1, search value1 in a row, if found get cell address and store in cell10. Then value2, search in the same row, if found get cell address and store in cell11. Then calculate number of rows between cells with addresses in stored in cell10 and cell11.
How do store the addresses and how to calculate this number of cells?
I need that number to use in next FOR loop.
I am trying to find a formula to calculate the percentage of the positive numbers in a column. For example, if I have a column that has positive(green) numbers and negative(red) numbers in the cells to show over daily goal or under daily goal, and I want to at know what percentage of all the numbers are the positive ones.
View 3 Replies View Relatedwhat I'm trying to do.
Background:
I play a game that requires 5 members to play, however you can have more then 5 members on the team. In order for a player to receive points for playing they must have played at least 30% of the total games played. The problem for me is when trying to figure out how many games someone needs to play to get to 30%, the total goes up as they play those games.
What I would like to accomplish:
I'm looking for help on a formula that would figure out how many games a player would need to play to get to 30%. I have a column that is total games played, %of games played by player, games played by player, and games needed to play to get to 30%. Basically the user would enter the # of games played by each player, and the total games played overall for the team for that week, the spreadsheet would then show the # of games each player that isn't above 30% would need to play.
I tried to make the question as clear as possible, if anyone needs clarification,
Originally Posted by shg
Welcome to Oz, Basca
spreadsheet with a representative sample of your data?
Games Played
Player 1 20
Player 2 7
Player 3 13
Player 4 20
Player 5 13
Player 6 13
Player 7 7
Player 8 7
Total Games Played20
I wish to write an "IF" formular to express a row of numbers in the way I wish to display them in accumulative fashion. 1 upto and including 9 = 1% ...
View 9 Replies View RelatedI have done is created an Officer Evaluation Form in Word for my Police Chief and the Scores for the different observations are: N/A, 1, 2, 3, 4 and 5. If for example there are 4 observations and one of the observations is "N/A" for not applicable or not observed and the rest are all 5's I want the formula to ignore the field(s) with the N/A and still come up with an average of 5. The way I have it set up now which is: =AVERAGE(KOW1,KOW2,KOW3,KOW4) it comes up with an average of 3 when I put a N/A in field KOW1 and all 5's in KOW2-KOW4.
View 3 Replies View RelatedAn age-old controversy has resurfaced in our lab regarding the calculation of a mean and standard deviation of a set of two numbers. There have always been those who say that you can't have a standard deviation of two numbers, but now someone has said that a mean of two numbers is meaningless (no pun intended). What is the current thinking on this? Of course, mathematically speaking, you can certainly calculate these values with only two numbers, but is a mean of two numbers not considered a valid measurement? How about a standard deviation?
View 2 Replies View RelatedI am doing a Golf scorecard but I have been having trouble figuring out how to calculate the last 6 lowest scores in a series of about 30 scores. What formula to use? Series looks like this
43 52 52 51 44 44 60 54 40 50 53 = 272
I have a long list or work items that I track on a log on daily basis.Some work items are repeated twice or trice to input a certain comment.Therefore, when I try to calculate the total number of work items for the day using counta formula, if results in an inaccurate total since certain work items are repeated twice or trice. The work items consist of a 8 digit number.Example 8876098.
View 4 Replies View RelatedAssume Cell A2 + A3 as the fraction: 60/100. How can I get the smallest fraction (3/5 in cells B2+B3). I do not want to use the build in cell format for fractions)
There are a few samples of want I would like to get a s the result (Red Digits). I will appreciate 2 ways: via VBA Code and via Sheet Build-In Functions.
i wish to do some conditional formatting. my target for the first 6 months from date activated is 50,000 after 6 months is 100,000. and for those below target, i will need it to be highlighted in red. thus i have 2 sets of conditions.(calculate the no. of months and the revenue).
View 2 Replies View RelatedDaily Result
14
10
16
10
5
15
8
12
15
9
I have the formula working for the average of the 4 lowest of all, using "AVERAGE" and "SMALL"; need for average of 4 lowest in most recent 7
Need a formula to calculate a absolute total from a column of totals.
I thought this was simple, but the formula I made didn't work.