I have a pivot table showing actual and forecasted sales per month for diffrent regions/sales channels/segment.
I would like to calculate the average monthly sale, for forecasted and actual data, within the pivot instead of doing it outside in columns to the right of the pivot table.
With Pivot Tables, there is the ability to add Grand Totals to Rows or Columns, but I want to add Averages to the end of the row instead. Can this be done? I have tried Calculated Fields but can't get the right result. Auto Merged Post;Hi again,
After I posted this I found another similar post, where the answer was that the "Average" calculation has to be done outside the pivot table, ie. there seems to be no way the pivot will give averages for rows, only grand totals.
If this is the case then I will have to work around it.... I was hoping it could be done within the pivot because I have graphs linking to the pivot and they all go spak when I update the pivot with different data. The number of columns will change all the time, meaning the average will need to be reworked. Just trying to save time!
I have a problem when Im trying to calculate averages in my pivot table. I dont know how to handle my missing values. If I leave them blank I cant get the average at all because the values end up under the dates instead of in a column next to the dates where I want them to be. If I write 0 it uses it as a value, eg 2+2+0 and i get 1,33 instead of 2. Also the zero could be a value for some of the parameters, so it's no good.
I am new to pivot tables.
I am trying to determine the average reduction amount of appraised property values. I have two columns in my spreadsheet. Column H has appraised value of property. Column I has the accepted value of the property. Sometimes the accepted value is the same as the appraised value, sometimes it is reduced, and sometimes it is rejected.
I want to be able to find the average reduction amount when the accepted value is less than the appraised value and is not rejected.
Column H always shows a numerical value (i.e. $250,000), but Column I may have a numerical value or show "rejected".
I have data in 3 different columns (A, C, and E) to name a few. I want to average each of these columns, but if any of them include zero values, I want to exclude that from my calculation.
Example:
Column A = 10
Column B = 0
Column C = 3
Right now, my "average" formula, is showing the average as 4.33. (average a5, b5, c5)
The real average I'm looking for is 6.5. What is the best way to setup my formula?
I've been trying to loop data for column A from row 1 until 6 and print the result on specified cell. But the problem is, it keeps looping until column B,C and D.
I want to calculate average result separately for column B,C, and D without taking the previous data.
Here is the code that I've done.
VB:
Sub Avg()
col = 1
Row = 1
Do
Name = ThisWorkbook.Sheets("Sheet2").Cells(Row, col).Value
If Name <> "#" Then
[Code] ....
I attached my excel. The green box indicate the result that I want : function.xls
It's probably best if you open up the attached example spreadsheet that contains sheets "Before" and "After" otherwise it might be pretty difficult to understand what I'm talking about.
So I have this spreadsheet where I have part numbers in column B, status of the orders in Column I and lead times in Column M. What I want to achieve is to get of Mode (col N), Median (col O) and Average (Col P) values of each part number and each of its status using the lead times in Column M. If possible I would only like this on the top lines of each of these. I have done the formulas manually on sheet After so if you click on the formula you can see the range's it covers.
I did create a concatenation in column K (conc of column B and I) as helper column because in theory this might make things a little bit easier.
Now going into second part. I would also like to do something very similar but only using the part number and status "Finished" and get the values in columns T,U, and V on the top row of each part number. I made some blue boxes and arrows to kind of point out the idea.
The solution can be either formula based or macro, it really doesn't matter, however I will intent to use it within macro either way.
So I am running in to a large brick wall! I have a single pivot tablet with a column for items received and then a column for items shipped. I would like to create a calculated field in the pivot table that will subtract the items received from the items shipped columns. I have attempted to add the calculated field using the tool bar but it keeps giving me "0" for every item on the pivot table when there are obvious differences.
View 1 Replies View RelatedIs a way to calculate the difference between two columns in a Pivot table .
I have the data something like this in a pivot table....
Sum of MetricValueColumn LabelsRow LabelsFebruaryMarchAprilMayJuneJulyNet New My SitesNet New Team Sites0Number of Provisioned Users322059319906322372350239332914328404Total Capacity In Use (GB)1585.381722.761824.731947.772124.282262.78Total No. of My Sites208212316924682307313313134317Total No. of Team Sites101751082311396683273227940
What i need to do is to calculate the "Net New My Sites" and "Net New Team Sites" values something like this....
Net New My Sites (March) = Total No. of My Sites(March) - Total No. of My Sites(February)
Net New My Sites (April) = Total No. of My Sites(April) - Total No. of My Sites(March)
I have a Pivot Table. I have two Columns Currently Current Week and Previous Week. The Values are displayed as a count for the Status Field. I would like to know if it is possible to add a calculated formula that will take the count difference between Current Week and Previous Week?
View 1 Replies View Relatedhow to find the average times of two different sets of groups. There are the baseline times and intervention times. Both groups have three subtopics: Time Fell Asleep, Woke Up, and Duration (how many hours I slept). I am not sure how to find the average of each subtopic. Here are the times....
Baseline times:
Fell AsleepWoke UpDuration
2:30 AM10:00 AM7:30 hrs
4:30 AM12:30 PM8:00 hrs
[Code]....
I have a column of percentages, how do I get an average % rate at the end of my column?
View 7 Replies View RelatedI want to calculate the average for 6 cells across 6 different worksheets.
For instance in sheet 7 i want to calculate what the average of sheet 1 A1, Sheet 2 A1, Sheet 3 A1, Sheet 4 A1, Sheet 5 A1 and Sheet 6 A1 is. However some the cells contain blanks/zeros which are resulting in an error message. The overall figure still needs to be divided by 6 to get the average.
I need to calculate the average based on SKU patterns.
For example, if the SKU begins with "CZD", then take the average SKU that meets that pattern.
SKU
Items Sold
CZD80
45
[Code] ......
I have two columns of data. Column B is age column C is gender. I want to calculate average male age and average female age. Suggestions?
Sample
B C
57 f
53 f
47 m
40 f
42 m
Average female age is ___
Average male age is ___
I need to find the average time it takes students to take exams . I use the following formula =text(end time - start time, "h:mm"). I am able to calculate the amount of time it takes a student to take the exam. Now I need a formula to calculate the average time students take to complete a test. I have over 80 times i need to average. Whenever i try a formula I keep getting 0.
View 9 Replies View RelatedI have an array formula in the attached file to calculate the average of the Top 3 (cell F6). I put that same formula in cell F14 to calculate the average of the Bottom 3 (just change the "large" to "small", however it doesn't work. The result shows zero. How do I fix this?
View 10 Replies View RelatedTrying to calculate the lost revenue value for when a piece of machinary is offline for a period of time based on the hrly price during that particular period. The machines come on/off line at various times during the year so i am trying to make this a bit dynamic so i only need to add new info and not have to change the formula
Column F - Off date of machine
Column G - Restart date of machine
Column H - Hrly time
Column I - Hrly price
I thought this formula (an array) would work for me
=average(if((Column H>=Column F) * (Column H<= Column G), Column I)) but it only calculates that average price for the first period and not new average prices for other periods.
what adjustments I can make to my formula or is there a better formula to use?
I need to calculate the average amount of days it is taking for files to be processed. Here is the example I have.
Assuming that B1=0 and C1=1 (in the # of days row)
# of Days 0123456789101112131415Total Files
File Count011712113203000000049
I'm working on a time series dataset with a time step of 15 minutes. I need to calculate daily average of the several variables. So let column "A" be the "date-time" column, let column "B" be the "variable column" and column "C" be the "average column", I need a function that calculated in C1 cell the average of B1 to B95 cells, in C2 cell the average of B96 to B190 cells, in C3 cell the average of B191 to B285 etc.
View 3 Replies View RelatedI'm using Excel 2003. I have about 190 rows that I use on any given day to enter start times & end times. I calculate the difference in Column E. Is there a formula that will calculate the average time as I enter them in the rows? Some days may have only 100 entries, other days may have as many as 190. I don't want to keep adjusting the average formula for column E.
View 2 Replies View RelatedI'm trying to make a formula that will calculate the average of the previous 12months. The goal is to tie the formula to a reference cell that contains a date. Each time the date is changed by a user the calculation will be updated accordingly. Here is the CSE formula that I thought would work:
{=AVERAGE(IF($B$5:$B$53=B$2,OFFSET($C$5,(COUNT(C5:$C$53)-1),0,12,1)))}
I've also attached a sample file to illustrate the problem. The 'range' portion ($C$5,(COUNT(C5:$C$53)-1)[/b]of the Offset function was setup simply to get the 12 months which preceeded the reference date.
I'd like to calculate an average over a variable range. In col.A there are grades from A4:A21. In col.C there are the values for the start row of the range and in col.D the values for the end row of the range.
For instance the value in C4=4 and D4=9. In cell F4 I want the average calculated over A4:A9. Value in C5=10 and D5=15. In cell F5 I want the average calculated over A10:A15.
I have a row of data starting in cell E4 that could, theoretically, go to the far right end of the spreadsheet. I need to enter a formula in cell D4 that calculates the average of every other cell in this row, starting with E4, that is E4,G4,I4,K4...
View 9 Replies View RelatedI am making a summery table of lots of soil contaminant data.
In my summery table, for each determinand I want the average value automatically taken from data from a number of other tables within this same spreadsheet.
For example, for pH- I would average the pH value found in each table, from cell D6, G24 and AB9.
The problem:
Out of the three tables where I take each pH value from, on occasions only one will have a value- the other two will be "0".
How do I ensure that, when averages are taken, it will always ignore '0' values?
How do you calculate the average of the last 20 values in a dynamic list? The list is in column A and updates every day by adding a new value in column A.
View 3 Replies View RelatedI have few data that I need to calculate average:
A B C
9 3 6
5 2 4
3 6 8
I need to calculate the average of column A/B/C --> Average (A2:C2) and Average (A3:C3) and Average (A4:C4). The end result should be pasted to another workbook from A1:A3
I would like to use VBA since I have written some VBA to other parts of the report....
I have the following data, where a negative number represents a sell of shares and a positive number a purchase and column C shows at what price the transaction happened.
A
B
C
D
E
F
1
Ticker
Quantity
Price
Ticker
Average Price
[Code] .......
And I've been asked to calculate the average price per ticker. For now it doesn't matter whether it's based on a first in first out principle or first in last out principle.
In field A2 I use now() to get the actual date.In colom C8:C1000 I have all monday dates.In colom E8:E1000 I have the weekly sales figures.
How can I calculate the average sales of the last 10 weeks?
I am trying to calculate a weighted average and have used a sum product to do so. My problem is that the values decrease over time and I have done this in cells d13 and e13 and this seems to work ok. My problem is that I have many months so I don't want to use the formula this way as it will be very long. I tried to use sum and offset to try and effectively sum each row but this doesnt work.
Weighted Average
B
C
D
E
F
G
3
months
4
rate
original value
1
2
3
4
[Code] ...