I am working on an excelsheet containing a data dump from a manufacturing database. Inside this sheet i want to make subtotals of different production runs. The data that needs to be added up is in one big list between every production run there is an empty cel. So I want to make a formula that does: =SUM(one-cel-above-current:next-empty-cell-above)
View 6 Replies----------A----------B---------C
1-------------------100
2--------11/29----150-------250
3--------11/29----300-------300
4-------------------200
5-------------------300
6-------------------150
7--------11/30----100-------750
Have column A with date, column B with subtotal, column C with Total. The Total (C) is made up of one to five subtotals (B). Subtotals to be included in the Total are those that come after the previous Total up to the row with a date. Only a row with a date has a Total. Is there a formula that can do this?
I am trying to calculate the total amount of kilos for a specific date with a given time range.
As well as the average time they have been handled with in the same specifications.
Attached is a sample sheet of the info I am working with but I cant seem to get the formulas to work.
Book1.xlsx
I need to set up an easy to use spread sheet for my office. It needs to be able to calculate the running total spent of fuel, as well as include any discounts we get and then calculate our total savings.So basically, total spent and total saved.
View 3 Replies View RelatedI have a column of data where the seperate entities are divided by blank rows. for example: i need to calculate sum(G3:G15) then skip the blank row (G16) and calculate the next group, say sum(G17:G50) and export that import to a new worksheet.
The issue is that the column lengths vary from day to day so the blank rows will not be in the same position.
I need to determine a formula which will allow me to calculate a future date based upon a current date with varying time periods.
For example:
I have a bill which is paid on the 15th and last business day of each month. I would like to be able to see the next due date regardless of what day of the week it is.
I have a bill which is paid every other Tuesday. I would like to know the next due date without having to enter +14 for every due date in the future. In other words, it is preferable to be able to open the spreadsheet and automatically see the next due date, not use autofill to repeatedly add +14 to a previous date which would limit the # of future due dates that could be calculated.
I have a bill which is paid on the last business day of each month, not the last Friday of each month. I would need excel to return a value for the last day of the month which = Monday-Friday, regardless of what day of the week it may be as long as it isn't Saturday or Sunday(holiday exclusion would be nice but not required).
I am attempting to have cells in Column 'U' deliver different drop-down menus based on the corresponding value in column 'D'. I have created 7 named lists:
List_117G
List_152
List_JMET
List_XBAND
List_PACWIND
List_VORTEX
List_ROVER
Those lists will be called up based on 7 values in column “D”:
“G”
“152”
“J”
“X”
“D/E”
“V”
“R”
So far I have only been able to get this to work for the first category “G”. When I change the value of column “D” from “G” to “152” I no longer get a drop-down. Here is the formula I am using in the List function of validation.
=IF(D6="G",List_117G,IF(D6="152",List_152,IF(D6="J",List_JMET,IF(D6="X",List_XBAND,
IF(D6="D/E",List_PACWIND,IF(D6="V",List_VORTEX,IF(D6="R",List_ROVER,)))))))
There are 11,000 rows and 4,000 are unique. The goal is to merge the data down to the 4,000 records. Each of the unique entries shows up 1 to 15 times.
In trying to solve this, I wonder if I should break this down into the different # of occurances and implement specific solutions. e.g., There are
5700 entries that show up 2x
504 that show up 3x
24 that show up 12x
code to take jobs that are done on one spreadsheet and send them to the next available row of a specified range on another worksheet. I am also looking to incorporate a way to delete the empty rows that are left behind.
I have already made code to select the completed jobs, but am still unsure how to approach the next part. I can't even paste the selected range to another sheet without errors from range sizes.
The following code is done up to the point where I cut my selection.
Sub Update()
Worksheets("OpenGen").Activate
Dim c As Object
Dim rngA As Range
[Code]....
I want to call a macro with a varying name that is within a module with the same name.
I have a module called Test1 and within this, a macro name called test1
I have a module called Test2 and within this, a macro name called test2
etc
On another module called Test8 (with the macro called Test8), this Test8 macro will call either Test1 or Test2 or Test3 etc depending on what I choose in an excel spreadsheet. So on sheet1, cell A1, there is a drop down with the options Test1 or Test2 or Test3 etc.
The following works to run the macro test1 from module test1 (when it does not vary i.e. i physically put in the name of the macro myself):
Sub Test3()
Test1.Test1
End Sub
The following works to run the macro test2 from module test2 (when it does not vary i.e. i physically put in the name of the macro myself):
Sub Test3()
Test2.Test2
End Sub
etc
However, if I try it so that the calling of the macro varies as below , it does not work:
Sub Test3()
MacroToCall = Sheets("Sheet1").Range("A1").Value
MacroToCall.MacroToCall
End Sub
I want to sum a range of cell in a macro. The range can change depending on what is imported. For instance, my range is from (Ax:Ay) and sums this amount on the cell below Ay.
View 9 Replies View RelatedI am trying to auto sum a range of cells, in 3 columns, that varies from sheet to sheet.
I have attached a sample sheet. The columns I am trying to total are columns "E", "F" and "G".
I need some programming help to control the length of the range in the formula below:
View 4 Replies View RelatedI am try to Set a range to a variable. The problem is the range differs in size. The good thing is there is a blank cell before each group that I am attempting to set the range to. I know it should be possible to set the range to stop at the blank row. I am locating the correct row by the date and want to set the range to include the next three cells to the right and all the cells below them up to the blank row.
View 5 Replies View RelatedI'm trying to sum a varying range of cells based on conditions in another column. right now im trying =SUMIF(B:B, "Active", C4:C10)
The number it is returning is not correct and I'm not sure whats wrong. Also, is there a way to allow the range of cells to vary? Like if I wanted to insert a row and have it included in the sum.
I have created a button to print an inventory list daily. The size of the list changes each day. The code I'm using works except I only want the Current Region to be defined as only the first 4 columns.
Private Sub CommandButton5_Click()
Sheets("Inventory").Select
Selection.AutoFilter Field:=4, Criteria1:="Inventory"
Set rng = Selection.CurrentRegion
ActiveSheet.PageSetup.PrintArea = rng.Address
ActiveSheet.PrintOut
End Sub
I want to load one with data from a worksheet query table that will vary in size each time it's executed. The length will vary, but the range is continuous, and five columns wide. I'd prefer a do while loop, looping until a blank cell is encountered. Can someone get me started with general syntax and setup of the array?
View 9 Replies View RelatedI need a formula that will calculate the total of the items in column "W" when the row directly below it contains a "1" in column "V". It will need to calculate the totals from that row all the way up to the next row that contains a "1" in column V.
Example:
In X14 (where I will put the formula) it would total W9 through W14. However the formula still needs to be able to calculate the total if there are more or less cells to sum. So that the same formula could calculate that in X8 it will total W5 through W8.
I am preparing a daily report available in sheet1 with the actual input in sheet2 generated through a tool.
The report contain three columns i.e. total cases, Total correction done and Not corrected. From the total cases on a specific date, I need to calculate how many correction have been done and how many are pending.
E.g. 01 January 2013=5 cases are uploaded in the tool.
on 02 January 2013, it was observed that 3 cases were corrected and 2 are pending But 9 cases cases are uploaded on the same day in the tool .
So Total correction done (C3)=3
Not corrected(D3)= 11
I have a list that is numbered 1 2 3...ect. I want to have a cell that tells me the total number of entries. I have a I'm not sure how I could do this.
1
2
3
4
5
6
1
2
3
Total = ?
If I do a normal sum it would just give me all of those numbers added up. I want the total to read 9 (in this case) My list changes all the time so I want that total to tell me how many entries I have.
I am creating an employee database. Any simple method for recording then calculating a total of occurrences when someone is tardy. I thought of using an OptionButton but I don't know how it could be applied and stored in my database. This is the code for the form as it exists now:
[Code] .....
I have a table which shows the monthly revenue of Company ABC , by client / by location / by business line.
ClientCountryBusiness LineJan-10 Feb-10Mar-10A001SingaporeResidential$ 50,000.00 $ 23,333.00 $ 54,115.00 D003SingaporeRetail$ 50,000.00 $ 21,548.00 $ 54,654.00A001SingaporeCommercial$ 63,321.00 $ 75,542.00 $ 21,564.00 D003AustraliaResidential$ 26,564.00 $ 50,000.00 $ 45,654.00 G002AustraliaRetail$ 50,000.00 $ 21,546.00$ 63,321.00G002AustraliaCommercial$ 26,602.00 $ 65,341.00 $ 24,568.00 A001Hong KongResidential$ 33,565.00 $ 26,564.00 $ 64,454.00 G002Hong KongRetail$ 54,232.00 $ 50,000.00 $ 15,454.00 D003Hong KongCommercial$ 26,564.00 $ 21,564.00 $ 23,333.00
If I want to calculate the total revenue for the month of January based on the following variable criteria:
Criteria
Client: A001
Country: Singapore
Month: Jan-10
I can achieve that with the use of SUMPRODUCT. However next month, I will then have to manually change the SUMPRODUCT formula so that it will extract data from the Feb column instead of the Jan column.
Is there a formula which will not require me to change the formula every mth? Ie. I can get my answer simply by changing the criteria?
I've got an excel spreadsheet that is using imported figures from another source. I'm just trying to create a macro that will locate the last cell in Column N, Then will total all the cells above it. I've got the below code to select the last cell in Column N.
myrow = Range("N1:N" & Range("N65536").End(xlUp).Row).Count
For i = 2 To myrow
Range("N" & i).Select
But I can't figure out how to do the sum part. I've tried to record a macro but to no avail. Since the number of rows will change each day, I need to somehow catch the range. This is part of a bigger project, but if I can get this part working, I think I'll be home free. Attached is a small example.
Basically, I'm trying to have a cell (eg.A1) where i can input a dollar value and when enter is pressed, on another cell (eg.A2) the dollar value gets added, then the original cell (A1) is cleared for the next input.
Then when I put the next input (A1) I want it to add on to this running dollar total (A2) and yet again A1 is cleared for the next input.
In addition to this I require an additional cell (eg.A3) that when each time a value is added in A1 it counts the times this is done.
How do you calculate the total commission of a particular person on a consecutive months ?
Attached is the excel file for reference : Total Commsn.xls
In the file I have attached, I need to work out how to give the final total (cell G27) inclusive of VAT, dependent on the value assigned in cells K17-K26, which are explained in the list starting cell B29.
At the moment the value given is net of VAT, and I need the total figure in G27 to recognise that the first item needs to be at 15%, the second at 5% and the 3rd at 0%.
I cut alphabet letters out of MDF. I need to calculate the total weight of any letter.
I have a program that will give me the area of any shape. In the picture below I have started with the letter A. B7 is the over all area. D7 is the small triangle. G7 is the total area minus the triangle D7. H7 is the thickness and I7 is the total volume.
The weight of my MDF I have set at is 850kg cubic meter. Thats set in A3.
I need the total weight of the letter in J7 to be in grams.
The idea is, I put in the areas and set the thickness and it gives me the total weight.
In the attached sheet, I need to find all items in column D that start with "LAB". For those items, Multiply the corresponding values from column B x column E and return the sum of all to cell T1. Once the total is in cell T1, I need to then delete the values in column E for those items (or change them to zero). I dont even know where to start with this.
View 3 Replies View RelatedThe code below basically adds addresses to both the page and the oracle backend. However I am trying to work out how to limit the number of addresses they can add to 100. Therefore is it possible via code to calculate If Me.finish.Value minus Me.start.Value is greater than 100 then stop the code?
View 4 Replies View RelatedBelow is my data
Complexity Type
Name
1
2
3
4
5
6
7
Ali,Shaheen Sultan
8
34
34
6
0
0
0
Budati,Manoj Kumar
7
18
18
12
6
0
0
Based on above data if The Column heading is 1 then it needs to go to the below data and multiply by that value and at the end should give me the total for the person. note that the total time is captured in a different sheet.
Complexity
Times Complexity 1
1
1.00
2
1.41
3
2.03
4
2.92
5
3.19
6
4.10
7
4.65