I'm trying to sum a varying range of cells based on conditions in another column. right now im trying =SUMIF(B:B, "Active", C4:C10)
The number it is returning is not correct and I'm not sure whats wrong. Also, is there a way to allow the range of cells to vary? Like if I wanted to insert a row and have it included in the sum.
I have a column of contract numbers of varying length. I want to run a sumif of all of the values on my reference sheet that have the contract number beginning with the contract number in my listing. All of the the contract values in my reference sheet are very long. Since the numbers I am working with vary in length, i don't know how to match this string in the sumif function
I want something like this
=SUMIF('Reference Sheet!$A$5:$A$13410,LEFT("", LEN('Select Contracts'!$C6))='Select Contracts'!$C6,'FINALIZED DATA'!$H$5:$H$13410)
Is there a way to refer to the range in the sumif function,
I'm looking for a function (I'm thinking 'SUMIF') that will search through column A of Sheet 1 and add column B of Sheet 1 when the cell in column A contains one of the strings listed in column A of Sheet 2. I can only find information when searching for single strings or cells.
View 8 Replies View RelatedI am trying to replace a range of cells with certain values but I can not figure it out. I'm almost there I think but don't know how to get the varying values I'm looking for. So I have a column (AJ in this instance) that has a bunch of "xx" values at different spots within the column. I want to replace those xx values with numbers 01 through 36. What I have below gets me just about there but it replaces every xx value with 01. How do I get it to go 01 on the first one, 02 on the second one, etc?
/code
Dim cell As Range
For Each cell In Range("AJ1", Cells(Rows.Count, "AJ").End(xlUp))
If cell.Value = "xx" Then _
cell.Value = "01"
Next cell
/code
I have the following formula and it works.
=SUM(IF(AND((Transfers!B6="Labour"),(Transfers!C6="In")),Transfers!G6,""))
Basically the sheet 'transfers' has a column named type and one named in/out, the current formula I have does a logical test on both of these and then if they are both true takes the cost of it from a column named cost. This works fine for single rows. However on another sheet I am trying to use the above formula but there will sometimes be more than one entry for the same date on the sheet 'transfers' and all the same dates that meet the logical test's conditions need to display the sum of the cost on this other sheet.
I'm trying to write some code that inserts a SUMIF function to a given range of cells:
In simplified form, the code runs as follows: ...
I am trying to use the SUMIF function in excel where I want to sum a range of cells greater than whatever is in cell D8. Here is what I tried to use, but it doesn't work. SUMIF(A2:A10,>D8,B2:B10)
The content in D8 can change because the user makes a choice from the drop-down list and a number pops up in D8 that is referenced to their choice.
I am attempting to have cells in Column 'U' deliver different drop-down menus based on the corresponding value in column 'D'. I have created 7 named lists:
List_117G
List_152
List_JMET
List_XBAND
List_PACWIND
List_VORTEX
List_ROVER
Those lists will be called up based on 7 values in column “D”:
“G”
“152”
“J”
“X”
“D/E”
“V”
“R”
So far I have only been able to get this to work for the first category “G”. When I change the value of column “D” from “G” to “152” I no longer get a drop-down. Here is the formula I am using in the List function of validation.
=IF(D6="G",List_117G,IF(D6="152",List_152,IF(D6="J",List_JMET,IF(D6="X",List_XBAND,
IF(D6="D/E",List_PACWIND,IF(D6="V",List_VORTEX,IF(D6="R",List_ROVER,)))))))
There are 11,000 rows and 4,000 are unique. The goal is to merge the data down to the 4,000 records. Each of the unique entries shows up 1 to 15 times.
In trying to solve this, I wonder if I should break this down into the different # of occurances and implement specific solutions. e.g., There are
5700 entries that show up 2x
504 that show up 3x
24 that show up 12x
code to take jobs that are done on one spreadsheet and send them to the next available row of a specified range on another worksheet. I am also looking to incorporate a way to delete the empty rows that are left behind.
I have already made code to select the completed jobs, but am still unsure how to approach the next part. I can't even paste the selected range to another sheet without errors from range sizes.
The following code is done up to the point where I cut my selection.
Sub Update()
Worksheets("OpenGen").Activate
Dim c As Object
Dim rngA As Range
[Code]....
I am trying to pull cell values similar to a SUMIF function (SUMIF(range,criteria,sum_range)). For example, in A1 I use a data list created from data elsewhere on the spreadsheet. In the data I created elsewhere, there are 2 columns being used. The 1st column is the information that is being used to create the list and the second column contains specific values (number or text). In the dropdown menu I select an available value (text or number) . When I have selected that value I would like cell A2 to show what the cell directly to the right of it shows from the data I have elsewhere in the spreadsheet as mentioned. I have tried the SUMIF function however it seems to exclude certain values (number or text) and I am not sure what else to use.
View 9 Replies View RelatedI want to call a macro with a varying name that is within a module with the same name.
I have a module called Test1 and within this, a macro name called test1
I have a module called Test2 and within this, a macro name called test2
etc
On another module called Test8 (with the macro called Test8), this Test8 macro will call either Test1 or Test2 or Test3 etc depending on what I choose in an excel spreadsheet. So on sheet1, cell A1, there is a drop down with the options Test1 or Test2 or Test3 etc.
The following works to run the macro test1 from module test1 (when it does not vary i.e. i physically put in the name of the macro myself):
Sub Test3()
Test1.Test1
End Sub
The following works to run the macro test2 from module test2 (when it does not vary i.e. i physically put in the name of the macro myself):
Sub Test3()
Test2.Test2
End Sub
etc
However, if I try it so that the calling of the macro varies as below , it does not work:
Sub Test3()
MacroToCall = Sheets("Sheet1").Range("A1").Value
MacroToCall.MacroToCall
End Sub
I want to sum a range of cell in a macro. The range can change depending on what is imported. For instance, my range is from (Ax:Ay) and sums this amount on the cell below Ay.
View 9 Replies View RelatedI am trying to auto sum a range of cells, in 3 columns, that varies from sheet to sheet.
I have attached a sample sheet. The columns I am trying to total are columns "E", "F" and "G".
I need some programming help to control the length of the range in the formula below:
View 4 Replies View RelatedI am try to Set a range to a variable. The problem is the range differs in size. The good thing is there is a blank cell before each group that I am attempting to set the range to. I know it should be possible to set the range to stop at the blank row. I am locating the correct row by the date and want to set the range to include the next three cells to the right and all the cells below them up to the blank row.
View 5 Replies View RelatedI am working on an excelsheet containing a data dump from a manufacturing database. Inside this sheet i want to make subtotals of different production runs. The data that needs to be added up is in one big list between every production run there is an empty cel. So I want to make a formula that does: =SUM(one-cel-above-current:next-empty-cell-above)
View 6 Replies View RelatedI have created a button to print an inventory list daily. The size of the list changes each day. The code I'm using works except I only want the Current Region to be defined as only the first 4 columns.
Private Sub CommandButton5_Click()
Sheets("Inventory").Select
Selection.AutoFilter Field:=4, Criteria1:="Inventory"
Set rng = Selection.CurrentRegion
ActiveSheet.PageSetup.PrintArea = rng.Address
ActiveSheet.PrintOut
End Sub
I want to load one with data from a worksheet query table that will vary in size each time it's executed. The length will vary, but the range is continuous, and five columns wide. I'd prefer a do while loop, looping until a blank cell is encountered. Can someone get me started with general syntax and setup of the array?
View 9 Replies View RelatedI am writing sum of few cells from the row above, to a single cell and then merging the cells.
I need to achieve this in vba but the problem is that the number of columns I need to use in the SUM formula can change month by month, though I know how many columns are there in each month and I am using A1 style to write formula in my code. I couldn't find any way to write formula in vba in such a way that you can change column name to variable (so that first sum covers columns 2 - 6 (or 2 + 4), second covers 7 (OR 2 + 5) - 10 (OR 2 + 8) etc.).
----------A----------B---------C
1-------------------100
2--------11/29----150-------250
3--------11/29----300-------300
4-------------------200
5-------------------300
6-------------------150
7--------11/30----100-------750
Have column A with date, column B with subtotal, column C with Total. The Total (C) is made up of one to five subtotals (B). Subtotals to be included in the Total are those that come after the previous Total up to the row with a date. Only a row with a date has a Total. Is there a formula that can do this?
I have a non-contiguous range of cells that contains Values, Formulas, Text or Dates. In some cases a field containing a value could instead contain a formula depending on who is filling out the form and/or what information is known. For example, a cell might contain a value, i.e. Utilities, and I might either know the total ($76,310), or I might need to perform a calculation right in the cell to obtain the total (=54236+9587+12487).
My goal is to be able to copy the information contained in this non-contiguous range to the right some 52 columns (this is a safe temporary storage location) and then be able to copy it back should I need to.
One other problem may be that the source cell might be a merged cell.
Since I cannot determine whether the information is going to be a value or a formula, and I have some text and date formats to copy as well, is there some way to copy this range and keep the data regardless of format?
My Range might look like: (F4, C5, D6:D7, D9, D13:D15, D17:D18, D22:D25, D27:D30)
F4 is a date field, C5 is a merged cell holding text, D6 is the Utilities field described above. The other fields are all formatted as dollars or percentages.
I have a macro that, at varying places, changes the formatting of adjacent cells. The formatting code is easy to generate via the macro recorder, but it's long - longer than the macro itself - and I'm using it a couple of times (due to if statements). That makes it difficult to read. It's usable, but looks ugly. I'd like to streamline its appearance.
Is there a way to do something like:
Code:
If range("F5").Value > 0 then
Activecell.Offset(1,0) format = blah
ElseIf Range("F5").Value = 0 then
Activecell.Offset(-1,0) format = blah
End If
The formatting I want is dark gray interior with a border box around it. The macro recorder generated this:
Code:
Sub test2()
'
' test2 Macro
'
'
With Selection.Interior
.Pattern = xlSolid
.PatternColorIndex = xlAutomatic
.ThemeColor = xlThemeColorDark1
[Code] ............
I have dollar amounts that I need to distribute amongst varying numbers of columns and not have have the total distributed be over or under the original amount by any number of cents. When I simply divide the dollar amount by the number of columns, the total of those columns can sometimes be more or less than the original dollar amount by a few cents.
e.g.
Dollar # of A B C All Columns
Amount Columns Total
--------------------------------------------------------------------
$25.05 2 $12.53 $12.53 $25.06
$11.47 3 $ 3.82 $ 3.82 $ 3.82 $11.46
$25.05 divided into 2 columns gives $12.53 in Column A and $12.53 in Column B. Total of Columns A and B is $25.06. Over by a penny.
$11.47 divided into 3 columns gives $3.82 in Columns A through C. Total of Columns A through C is $41.46. Under by a penny.
I know I could simply always add or take away the pennies from one column, but I would prefer the process to be random or formulated in such a way that the Column to which the extra pennies are added to or taken away from differs in order to be "fair to each column".
I need to concatenate varying numbers of cells based on duplicates found in a separate column, but I'm not sure how to approach it. I have 41,000+ rows of data, so I have to find a formula.
Example:
1AB2Denton, PaulFB357D4D3OwensTest, MarcyFB539F934Brennan,
JosephFB539F935Bowser, AmyFB539F936LaRock, ChuckFB667D3B
Based on duplicates in column B, I want to combine the data in column A into one cell. The duplicates in column B could be only 2, or could be 20+.
I have a simple sumif formula that says =SUMIF(W61:W112,"<30",J61:J112). In column W, there are values ranging from 0 to 5000. If the formula is written like it is above, it excludes summing values from column J when the cell in column W equals 0. Why is this? I can just add another function that says sumif "=0", but I don't think I should have to.
View 3 Replies View RelatedI'm looking to build a football data sheet on matches played with a column that adds up the last 3 match goals for the team in that row. I've only managed to get as far as adding up all goals for a team in a static date range using SUMIF. I imagine this is more complex and requires some kind of changing sum range that's relative to the cell I'm in.
I'm intermediate at best so any array formulas and VB script would preferred to be avoided if possible.
in the watered down example below, I'd like to add up all home team goals for Hereford in the last 3 matches, therefore excluding the game on the 10th (row 1) giving a total of 5. I'd like this formula to copy down from a13 to future matches and therefore update. So the next week's match will add goals for hereford from e13,e11,e8 but exclude e2, e5. Yes you've guessed it... I'm trying to work out recent team form to predict match outcomes for financial gain...
I want to use the SumIf function to sum cells when other cells begin with certain characters.
I've toyed with a few ideas of how this could work, but i don't know how to specify that the cells need to begin with certain characters. The cells that would be the criteria and the ones that would be summed come out of an Oracle database (and i have no control over the way they're pulled out - yet) so the beginning characters are connected to extremely unique information, so i dont want that to be included in the if part, for obvious reasons.
I have a spreadsheet that has about 50 sheets and a summary sheet at the front the layout of the summary sheet is column A has skill sets from A4 to A20 and across the top it has week commencing dates from F3 to about BA3 (dates go from w/c 06/05/13 to 08/12/14). On the other sheets they have the dates in the same columns but the skill sets vary as to each project, some projects may have two of the same skill set in column A because there is two people needed who can do the same thing, I need to total up the days over the sheets for each week and skill set.
I have been using the SUMIF formula as follows:
=SUMIF('Sheet2'!A8:A10,'Summary'!A4,'Sheet2'!F8:F10)+SUMIF('Sheet3'!A8:A15,'Summary'!A4,'Sheet3'!F8:F15)
And so on for each sheet and then change the formula for the next skill set and then again for the next column.
Is there a way of doing this without having to enter a formula into each cell, at the moment I am coping and pasting the formula into word to do a find and replace to change the SummaryA4 to SummaryA5 etc and then into the next cell for the corresponding date.
So to make this seem like it makes any sense I am looking for say an 'Administrator' in all the project sheets over all the dates and for it to add it up for the summary sheet. Under the corresponding week against the skill set.
So it would be F4:F20 for w/c 06/05/13, G4:G20 for w/c 13/05/13 and so on until all skill sets.
I have come across this SUMIF formula which sum a range and ignoring errors produced by formulas in the range, I can't figure out how this works and need the expertise of the Excel experts here. =SUMIF(A2:A9,"<1E100"). What does "<1E100" represent and how its work
View 2 Replies View Related