Calculation Of Values In A Column?
Jul 29, 2014
I have a spreadsheet where I am trying to quantify which items meet certain conditions.
In columns J, K and L I have dates. Column M is an associated $ amount. Column N calculates the number of days between J and K and column O calculates the number of days between L and K.
I have to get the dollar amount for column N over 45 days and in column O the dollar amount under 120 days.
My formula for column N is =sumifs(M6:M1166,N6:N1166,">45") and for column O is =sumifs(M6:M1166;O6:O1166,"
View 2 Replies
ADVERTISEMENT
Feb 15, 2010
I have a calculation that returns a result in F25 as a %. depending on the level of percentage I would like cell G25 to return >50% = poor, 50-65=average, 65-75=good and <75% = Excellent with the font being bold, red, orange, yellow and green accordingly.
View 11 Replies
View Related
Jan 12, 2010
There is a data range in the E + G columns. The content of the E column can be 5 different items with variable GROSS weights in the G column:
.........E..........G..........R...........S...........T
1.....Size.....Gross....%.........Net......Size
2.....200 g....138......56.52...20........45 g
3.....100 g.....84....................35......100 g
4......45 g......52....................60......200 g
5.....500 g....253...................124.....500 g
6.....Strip......15.......................7........Strip
7.....100 g.....90
8.....500 g....280
9......45 g......62
10........................
View 2 Replies
View Related
Jan 23, 2007
In my Case Else, I have it set to take the Average of the values in cells M8 for all sheets other than the ones listed in my other Cases, same for M9, etc. for each worksheet I have.
The change I want to make is as follows: I'd like it say say if the value in Cell M8 is the same on all sheets then place x value in cell M8 on the active sheet, same for M9, on so on and so forth. Only if the values in Cell M8 for each sheet are not the same then take the average.
Private Sub CommandButton1_Click()
Dim sh As Worksheet, sum As Double, n As Long
n = 0
sum = 0
Dim arr() As Variant
Dim nbrOfAvgs As Long, i As Long
nbrOfAvgs = 19
i = 0 ....................
View 9 Replies
View Related
Jun 10, 2006
As an example, cell values as follows.
A1 = 1, 2 or 3, B1 = 2.5
Is it possible to say, if A1= 1 then make C1 equal to B1+4, otherwise return the value of 0?
View 6 Replies
View Related
Jan 30, 2008
I currently have a userform which inputs data into two cells, the third then multiplies these two cells together, which is all honky dory. It works, 2 x 2 = 4.
But when i put 0.6 for example it really doesnt work. 0.6 x 25 = 25. WRONG. My code in the macro is fairly long winded but will paste anyway.
If ComboBox2.Text = "Pounds (£)" Then
Sheets("Claims").Range("G16") = TextBox2.Text
Else
Sheets("Claims").Range("F16") = TextBox2.Text
End If
Sheets("Claims").Range("B16") = ComboBox1.Text
Sheets("Claims").Range("C16") = TextBox1.Text
Sheets("Claims").Range("B16") = TextBox3.Text
Sheets("Claims").Range("D16") = TextBox4.Text
Sheets("Claims").Range("E16") = TextBox5.Text
Dim a As Long
Dim b As Long
Dim answer As Long
a = Sheets("Claims").[E16]
b = Sheets("Claims").[F16]
answer = (a * b)
Sheets("Claims").[G16] = answer
View 3 Replies
View Related
Jun 13, 2008
I have wind speeds and elevation data for 200 points. Each variable needs to go into a calculations spreadsheet on another worksheet. Once each variable gets put in the calculations automatically spit out the result. Now I need to use macro to automate this process so that it will repeat the steps I took for every line of data.
In English code terms, I want the Macro to say, take wind speed number and input in wind speed cell in calculations spreadsheet. Then take elevation number and input in calculations spreadsheet. Then take result number from calculations spreadsheet and input in cell. Then loop to go down the 200 lines of data. Is this possoble? Sorry for the non-technical wording.
View 3 Replies
View Related
Feb 26, 2007
i have a list of numbers in column A and B and C etc and i am trying to do some simple math for every 4th cell
Const startrow = 1
Const endrow = 60000
Range("c3:ba6").Value = 0
Range("c9:ba12").Value = 0
For y = 1 To 2
x = 0
For i = startrow To endrow Step 4
If Cells(i, y ).Value = 0 Then
x = x + 1
Else
If x > Range("c3").Value Then
Range("c3").Value = x
x = 0
Else
x = 0
End If
End If
Next i
Next y
however it can add the number in column A but never add the number in column B.
View 9 Replies
View Related
May 24, 2008
I'm quite a novice at Excel. I have a column of values that I sum as follows;
A
0
0
0
0
0
0 <----------------sum of A1:A5
A formula may change one of the values in the above column to a '1' which means the sum will become '1'. The sum can only be '1' or '0' and only one value in the column will ever change. I need to add a value of 2 to another cell (say, C1) when the sum of A1:A5 changes from a value of '0' to '1'. I know this will probably involve the worksheet change event but am having a problem implementing it.
View 7 Replies
View Related
Nov 9, 2009
I have Column A to show the Project I am working on and Columns B-M show the months of the year with the figures under certain months. In Column N I just want to show where a figure falls under a certain month, I want Column N to show the month (header) that particular figure is under e.g. N2 should return a value of "March", N3 ro return a value "June" and N4 to return a value "April/September".
View 5 Replies
View Related
Sep 24, 2013
Identtime altlatlon
a3340.3320004551
a3360.3325004450
a7880.3350004425
a5210.3310004910
a8520.42000453
a9560.51002030
a8410.5580002063
a9650.680002465
I need a formula that recognizes identical times then takes the difference between the altitude, lat, long of the two identical times.
So ideally the calculation that would be performed.
Ident (a334)-(a336) 2000-2500 45-44 51-50
Ident (a334)-(a788) 2000-5000 45-44 51-25
Ident (a334)-(a521) 2000-1000 ''''''' ''''''''''
Ident (a336)-(a788) 2500-5000 '''''' '' ''''
Ident (a336)-(a521) 2500-1000
Ident (a788)-(a521) 5000-1000
I created a pivot table to try to calculate the difference but it cannot do it an a algorithmic type fashion like this. Then eventually I need to conditionally format it to if all three meet a certain criteria that it will put it in a separate chart only if all three conditions are met.
So if Ident (a334)-(a336) 500 1 1 (ex. of all three criteria being met [actual parameters not important but these values will be flagged in my conditional formatting])
This needs to then be put in a separate chart with all other data that meets all three criteria.
So the steps I need to perform this function:
1. Does Ident "x" equal Ident "y" time?
Yes: Take difference between all three parameters. Do all three meet Criteria?
Yes: Put all calculated info in separate chart if they meet all three criteria. Does Ident "x" time equal Ident "z" time?
Yes: Take difference between all three parameters. Do all three meet Criteria?
No: Generic Algorithim.xlsxEnd
Yes: Put all calculated info in separate chart if they meet all three criteria. Does Ident "x" time equal Ident "aa" time?
No: End
No: End
No: Move on to does Ident "y" time equal Ident "z" time?
[Rinse, Wash, Repeat]
View 1 Replies
View Related
Mar 19, 2014
How would I fix my formulas from not working when I filter other columns? It is a simple =A1/A3 cell and this calculation is down the full column. When I filter any column, the calculation does not stay with the assigned cells.
View 2 Replies
View Related
Jun 29, 2013
Criteria
Column B
Constant
Variable0
Variable1
Variable2
Variable3
2
[Variable2/Constant]
5
123
43
45
76
[Code] ..
This is my table. What formula should I use so that Column B shows the calculation depending on the Criteria column?
View 9 Replies
View Related
Aug 22, 2013
[URL]
I have Column C and D filled with numeric temperature and humidity data. I need next 16 rows (8 more set) to be filled with randomly generated dummy data by the values exist in C and D. Same numbers but randomly distributed.
View 2 Replies
View Related
Oct 1, 2013
There should be a formula to extract the largest values and its corresponding values. For example, if column
Products Costs
A1 Pen 200
A2 Pencil 125
A3 Radio 670
A4 Apple 1500
A5 Xbox 222
A6 TV 100
The desired outcome
Products Cost
Apple 1500
Radio 670
Xbox 222
Pen 200
Pencil 125
TV 100
The second goal is extracting the top 3 largest values using a formula.
Sample file is attached for your convenience. Desired outcome is in GREEN.
View 6 Replies
View Related
Dec 5, 2013
Below the two columns represent Column A (date and time) and Column B is temperature.
How can I take the mean of all temperature values for May 1, then take the mean of all temperature values for May 2, etc.?
5/1/2013 0:0012.4
5/1/2013 1:0012.4
5/1/2013 2:0012.5
5/1/2013 3:0012.5
5/1/2013 4:0012.5
5/1/2013 5:0012.4
5/1/2013 6:0012.4
View 2 Replies
View Related
Dec 24, 2013
I have two columns in excel, col A and col B.What I would want to achieve is following:
Col A Col B
A 2
A 2
A 2
B 3
B 3
B 3
B 3
C 3
C 3
C 3
Now I want a total of values in column B pertaining to unique (or say 1st occurences) of values in Col A. So in this case the output should be 8 ,Achieved as follows(2 +3+3).
[URL]
View 5 Replies
View Related
Jun 11, 2014
Here is a table
Col1 Col2 Col3 Col4
8821015m14:44.0E__uMail
9266321m34:13.0E__uMail
92677165m23:43.0E__uMail
9309415m07:24.0E__uMail
[Code] .....
Here is some context
Each one of these rows represents an entry into a ticket in our incident management system. Col4 represents the method by which the incident was reported to us (Email, Voicemail, Walk In, Ask IT). A ticket can be open and closed with a single entry if the issue is easily solved or it can have many entries if the issue is complex and requires more troubleshooting or escalation to a higher tier of support. I need to determine the number of unique tickets submitted by each reporting avenue (Email, Voicemail, Walk In, Ask IT).
In this table the number of tickets that were:
submitted via Email is 14
submitted via Voicemail is 1
submitted via Walk In is 2
submitted via Ask IT is 1
Col1 Col2 Col3 Col4
8821015m14:44.0E__uMail = 1
9266321m34:13.0E__uMail = 2
92677165m23:43.0E__uMail = 3
9309415m07:24.0E__uMail = 4
[Code] ....
What I need is a formula that will produce this result.
View 5 Replies
View Related
Jan 31, 2008
I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
View 9 Replies
View Related
Feb 21, 2013
I am trying to sum certain values in one column based on the values of another column. I made a few tables, generated some random numbers, and then I started writing up an if-then statement to see if I could get what I am trying to do to work. However, I was having difficulty getting the program to run, because I was declaring more than one variable (I think).
So for instance, I want cells in column G to sum forces in column C when a joint in column E matches a joint in column A. Similarly, I am trying to do the same thing for columns F and B.
I have attached a picture, which shows what I would like for the program to do automatically (rather than me doing it all manually)! I didn't include the code I wrote, because it was so minimal
Attachment 51660
View 3 Replies
View Related
Jul 23, 2014
Ccheck the attached sheet for the explanation.
Book1.xlsx‎
View 2 Replies
View Related
Apr 7, 2014
I'm currently working on a spreadsheet that contains 30,000 leads and their respective companies and i need to filter out any leads that work for companies present in a different list of companies (1,834 companies). Basically, i need to filter column A so that it only contains companies present in column B. Is there a way to do this using the advanced filter?
View 1 Replies
View Related
Nov 26, 2009
I have about 360 records in Column 1 and less columns in Column 2 (333 in this case). All the values in Column 2 are in Column 1. I need to be able to match those two columns up while keeping the data in Column 3 intact with it's corresponding value in Column 2. FYI I searched and found this thread: ttp://www.excelforum.com/excel-work...n-another.html
But my problem is that I have to tie in the values with column 3 to their corresponding values in column 2. In order to illustrate, I have attached an excel file in which I did the operation manually. (note: all values in column 2 are indeed in column 1 but not in the example as I have shown for the sake of convenience).
View 2 Replies
View Related
Jul 8, 2013
I have two DB extracts for 2012 and 2013 with customer id's that no not repeat across the year - columns A and B. I need to arrange this from:
2012
2013
270806
330011
330011
350529
350529
369916
to:
2012
2013
270806
0
330011
330011
350529
350529
0
369916
So the major idea is that the customers that are extinct in 2013 would appear as 0 in the Column B; customers that are the same would be aligned vs the previous year and new id's would appear on the separate row.
View 5 Replies
View Related
Mar 6, 2014
I have a workbook with 20 sheets in English Language, but I must to translate in Russian. Translating has done by human translator, so translation is good. I must change phrases and words in english to russian. I can use find/replace function but doing by hand it's very tie consuming. I need VBA or macro who takes values in column A, finds it in entire worksheet and changes it to matching value in column B. Is it possible and how I can do it?
View 1 Replies
View Related
Nov 18, 2009
I have a vba form with three comboboxes. The first combobox contains a list of employees, the 2nd a list of work activities and the third a list containing hours. As each employee enters the data for their name, activity and hours these values are saved to sheet6 starting at A10, B10 and C10. I want to be able to sum the hours for each employee who enters data. So the completed user form could look like the following:
HTML Employee (A) Activity (B) Hours (C)
Joe Swept 1.25
Raked 1
Bill Mowed 2
Cleaned 1
Joe Trimmed 1
So as you can see there could be a blank cell in column
"A" under Joe and Bill and Joe could come back later and
enter more info. What I want on sheet6 say starting at A30 the value
Joe would be entered and in B30 his total hours 3.25. In A31
Bill would be entered and in B31 his total hours 3 and so on for other
employees
View 9 Replies
View Related
Jan 2, 2010
If values in column B are alike or if only one value exist in column B, I would like to copy values from column A over into columns D and all other columns to the right of D,
Before and after examples are below....
View 9 Replies
View Related
Apr 25, 2014
For column "B" count all the 1's if column header is equal to name in column A.
For Column "C" needs to be checked if a value was filled in column "I" if yes then check if in column "L" has a value, count all these values.
View 5 Replies
View Related
Jun 3, 2009
Hi, I'm very new to writing Excel Macro's and wanted to know if I could do the following. Conceptually, I understand what I need done and think it should be fairly straightforward.
There's 2 main events in this loop (I hope that's the correct terminology):
Input 1) User defines the beginning cell to start the loop. In this case, A2.
Input 2) User defines the range of columns/rows to display. The formula for rows that I've thought of is 4r. So if a user wants 20 rows below cells A2, they simply input 5 for r. The number of columns is a constant 5. So if r=5, then I'd want the range to be A2:E22......
View 13 Replies
View Related
Apr 4, 2014
I require calculating difference between two columns. (Actual and Estimated).
Difference between these two numbers are calculated in third column, but it is reset every time actual number is non-zero.
Scenario:-
-Estimated Numbers are always followed by an actual number.
-After actual number is obtained, estimated numbers till that date will be added and deducted from actual number.
-After this, again estimated number will be added till next actual number is obtained for deduction.
If estimated number is not followed by actual number, then no need for difference calculation.
View 3 Replies
View Related
