If Value Matches Any Other In Column Make Calculation (Algorithmic)

Sep 24, 2013

Identtime altlatlon
a3340.3320004551
a3360.3325004450
a7880.3350004425
a5210.3310004910
a8520.42000453
a9560.51002030
a8410.5580002063
a9650.680002465

I need a formula that recognizes identical times then takes the difference between the altitude, lat, long of the two identical times.

So ideally the calculation that would be performed.

Ident (a334)-(a336) 2000-2500 45-44 51-50
Ident (a334)-(a788) 2000-5000 45-44 51-25
Ident (a334)-(a521) 2000-1000 ''''''' ''''''''''
Ident (a336)-(a788) 2500-5000 '''''' '' ''''
Ident (a336)-(a521) 2500-1000
Ident (a788)-(a521) 5000-1000

I created a pivot table to try to calculate the difference but it cannot do it an a algorithmic type fashion like this. Then eventually I need to conditionally format it to if all three meet a certain criteria that it will put it in a separate chart only if all three conditions are met.

So if Ident (a334)-(a336) 500 1 1 (ex. of all three criteria being met [actual parameters not important but these values will be flagged in my conditional formatting])

This needs to then be put in a separate chart with all other data that meets all three criteria.

So the steps I need to perform this function:

1. Does Ident "x" equal Ident "y" time?

Yes: Take difference between all three parameters. Do all three meet Criteria?

Yes: Put all calculated info in separate chart if they meet all three criteria. Does Ident "x" time equal Ident "z" time?

Yes: Take difference between all three parameters. Do all three meet Criteria?

No: Generic Algorithim.xlsxEnd

Yes: Put all calculated info in separate chart if they meet all three criteria. Does Ident "x" time equal Ident "aa" time?

No: End

No: End

No: Move on to does Ident "y" time equal Ident "z" time?

[Rinse, Wash, Repeat]

View 1 Replies


ADVERTISEMENT

Make A Calculation(addition) And Use The Answer To Multiply Against Another Addition Calculation

Nov 19, 2008

make a calculation(addition) and use the answer to multiply against another addition calculation....

The sum of (Monday!A1:A4) multiplied by the sum of (Monday!B1:B4) plus (Tuesday!A1:A4) multiplied by the sum of (Tuesday!B1:B4) and so on.

View 2 Replies View Related

Make #NAME? Go Away And Calculation Come Back

Jan 1, 2010

=IF(OR(J4="",K4=""),"",NETWORKDAYS(J4,K4,Holidays!Z29:Z39)-1)

I have this formula in Column L. The calculations are working fine and I close the file. After I email the workbook from one computer to another and then resave it, every row in Column L that has the formula turns to #NAME?

Do you know why this is happening?

View 12 Replies View Related

How To Make A Calculation Using Variable Text

Jul 2, 2014

I am trying to make a calculation using variable text.

My outcome cell is D3 and my two variable cells are C3 and F3. In C3 I want to be able to insert a staff members name, of which we have 6 different members of staff. In F3 i need to insert the week number which runs 1 through 6. The outcome is the individuals place on the week roster which needs to be a number between 1-6 inclusive. SO basically if F3=1 & D3=J.SMITH then I need D3 to equal 1 keepng in mind that if F3 & D3 have 6 possible variables.

View 1 Replies View Related

How To Count A Column If It Matches Data From Another Column In Seperate Rows

Feb 6, 2009

I have two columns with dates. Colum A has the date of the deadline of a document while column b has the day it was sent. Column X will display the difference if its a positive integer ( i.e. if the document has been sent after the deadline). Now i have another column Y which displays the month as an integer of when the document was actually received.

Now i need a counter which will count the number of instances a positive integer is registered in column X according to the month in column Y. I have been trying everything but cant figure a simple way to do it. Im doing this so i can be able to see how many documents are sent after the deadline per month.

View 14 Replies View Related

Lookup Up/Match: Return A Value In Column A If My Data Matches Column B?

Jun 5, 2009

I have a tab that has 2 columns of data and I want to be able to return a value in column A if my data matches column B. If column B has the text TRUETRUE, I want to bring back the corresponding data in Column A. How do I return all the data in Column A for all the TRUETRUEs in column B? I can only get the first instance of TRUETRUE.

View 4 Replies View Related

Count Unique Values In One Column If Other Column Matches?

Oct 18, 2011

How do I count unique values in Column A only if the values in Column B match?

A B
1 a
2 a
1 a
4 b
5 b
1 b

The formula would return "2" for "a", and "3" for b. Basically, there are names in column B, and I want to know how many unique things are in column A for each person. If there is a better way than a formula (pivot table?) that would be great - like a table that has each of the names (from Column B) and the number of unique items from Column A next to each unique name.

View 5 Replies View Related

Sum Of Values In Column If Text In Same Row Of Adjacent Column Matches?

Apr 10, 2014

I need to sum values in a column, but only if the text in the same row of the adjacent column meets certain criteria. Below is a simplified version as an example:

A1 - Apple
A2 - Banana
A3 - Apple
A4 - Banana

B1 - 3
B2 - 2
B3 - 1
B4 - 1

I need a formula that will add up the cells in column B that have "Apple" next to them in column A. Apple would total up to 4 and Banana would total up to 3.

View 1 Replies View Related

Delete Entire Row If Column A Matches Column D

Aug 18, 2009

Does anyone have a macro that will delete entire row if column a matches column d

View 6 Replies View Related

Return Value From 2nd Column When Value In 1st Column Matches Given Criteria

Oct 4, 2008

I have a column containing text values eg M1, T2, M3, A4 etc. and I am trying to return the value (numeric) in a second column to a cell when the text value in the first column is matched.

View 4 Replies View Related

Sum Numbers In Column If Date In Other Column Matches

Oct 4, 2007

I have a spreadsheet which will be completed by numerous users, with a worksheet reserved for each area. The spreadsheet is to record the number of days lost to training etc on a weekly basis.

Each worksheet has 3 columns – column A DESCRIPTION, column B WEEK COMMENCING DATE and column C DAYS LOST.

The table will be completed by the manager’s as the info becomes available to them.

I will be collating the data on another worksheet and need a formula that will look in column B for all instances of 01/10/07 and then sum the corresponding cells in column C, then do the same for 08/10/07 and so on.

I have attached an example of a page.

I thought it may be VLookup or Sumif, but I don’t know how to go about it.

View 3 Replies View Related

Cross Check 2 Ranges For Matches & Return Row Number Of Matches

Apr 29, 2009

I have several worksheets (Labeled Sheet1,Sheet2,sheet3) What I need to do is to step through each row in sheet3, and do a search in sheet1, it the data was found, then return the row number. I then will need to copy data from sheet1 (rowfound columnA , through rowfound CoulmnBd to sheet3 current working row columnK

View 3 Replies View Related

Return Matches & Non-Matches From Delimited Cells Against List Range

Jan 29, 2010

In my spreadsheet, on the first worksheet called "Working". Column A, called "Results", contains carrot ^ delineated string values in each cell (i.e."john^apple^pear^banana^grape^love^heart^pickle"). The majority of string values in every cell in my "Results" column match a "source" column of Pick-List Values, called "Fruits" in the same spreadsheet, however found in a different worksheet called "Lists" (also in Column A). I want to perform 3 functions against my "Results" Column on worksheet "Working":

1.) Report In Column B: Analyze column "Results" by cell and return carrot delineated string values for only those that match my "Fruits" Pick-List

2.) Report In Column C: Analyze column "Results" by cell and return carrot delineated string values for only those do not match my "Fruits" Pick-List

3.) Report In Column D: Identify and return all unique values in "Column C" as a List.

Attached is a simple example of what I'm trying to accomplish called " Sorting.xls"

View 4 Replies View Related

Find In Column Possible Matches

Jun 13, 2007

I have a list of values in a column. In that column, I want to find 50 possible matches. Is this possible in Excel? In the column there are multiple strings of text.

After it finds these 50 potential matches, the formula should return a value next to the cell where it matched. PLEASE HELP IF THIS POSSIBLE.

View 9 Replies View Related

Finding Matches From Column B Within Column A

Apr 6, 2012

Here is what I am trying to accomplish.

I have to columns.

I have copied column A from a PDF file. It contains entries like this, all in the same column:

5 0.002HP Direct- 26845 7/1959 Airesearch

This column contains an ID # (5), a description (0.002HP Direct), a part # (26845), a date (7/1959), and a manufacturer (Airesearch). All this info is in one column. This column is 11,000+ entries long.

I have column B which is 45,000+ entries long, and contains ONLY part numbers, like this:

325111

I would like to compare column B to find the matching results from within the text of column A, and put these matches into column C.

View 3 Replies View Related

Determine Column Value Based On Another Being Yes And With Matches?

Jul 3, 2014

I have a table with this sample data:

A Report Number
B Funding Code
C Approver Code

[Code]....

For cells with column F="NEXT" and matching values in column A (i.e. Rows A2-A5 all match) and "Yes" in any of those same rows (i.e. E2-E5) for column E, column G should read "No". If no "YES"s are in those rows (i.e. E2-E5) then column G should read "Yes".

I can't figure out using VLOOKUP or INDEX and MATCH how to make this work. Would I need to get into VB to do this?

View 1 Replies View Related

Replace Column With Certain Criteria Matches

Apr 20, 2009

4 columns a-d. now if i find either 1 of the 2 particular strings "hello" or "bye" in column A, I want to move column b into its place and leave the rest of the columns untouched

Example:

dog, circle, blue, 123
hello, frog, green,223
pig, triangle, red, 445
bye, elephant, grey, 322

into

dog, circle, blue, 123
frog, blank, green, 223
pig, triangle, red, 445
elephant, blank, grey, 322

View 2 Replies View Related

Find All Matches In Column Range

Jun 13, 2009

The objective of the code is to determine if a value in Column A exists:

- If it does, then copy data from a different worksheet into the row of the worksheet where the value resides
- if it doesnt, then go to the last used row in Column A and add then copy data from a different worksheet into the new row

The portion of the code im having trouble with involves the Finding of the value in Column A, and also the error handling when it doesnt find it.

The code below doesn't handle the error correctly.. for the data set im running the code on, it should find a value in Column A (which it does) but then it also runs the ErrHandler portion..which shouldnt happen.. it should only run the ErrHandler portion if it cant find the value in Column A (which therefore means a new record is required)

Sub UpdateRecords()
Dim fitem As String
Dim nmax As Integer
Dim nRow As Integer
Dim rFoundCell As Range

nRow = 10
nmax = Sheets("Availability").Range("schedulechange").Rows.count

Do While nRow <= nmax ....................

View 9 Replies View Related

Copy Row If It Matches Data From Left Most Column?

Apr 25, 2014

I am trying to copy values and dates from a row if it matches the numbers in the left column.

I attached a simplified version where I explained how it should be done.

View 9 Replies View Related

Count Formula For Matches In One Column And Mismatches In Another

Feb 25, 2014

I'm trying to sift through 10000+ rows of results, and I'd like to know if there's a count formula to determine how many times I have matches in one column (name) and mismatches in another column (ID #)

Profile ID |Name | License #
12345 |Debra Nelson |12345678
12345 |Debra Nelson |23456789

I want to count how many times theres a match in the 1st or 2nd column (profile ID, name - those two columns should match) and a mismatch in the 3rd column (License #). I'm not sure if this can be done with a formula, like a COUNTIF, or not.

View 4 Replies View Related

Lookup Formula That Matches First Three Digits Of Column

May 7, 2014

I need a lookup formula that matches first three digits of column, U (153 - LINE PIPE), and match Total 13153 - LINE PIPE, 7th, 8th, and 9th digit in column C. and bring value from either column T,

The formula that I am using is not obviously not correct, I am putting it here to show what I am trying to do.

{=INDEX($T$2:$T$16,MATCH(LEFT(S2,3),MID(C2:C273,FIND(" ",C2),3)),FALSE)}

View 5 Replies View Related

To Use =MATCH To Find A Value In One Column That Matches A Cell

Oct 7, 2008

I am trying to use =MATCH to find a value in one column that matches a cell. The cell contains a formula and I want to match to the result.

At the moment it isn't working.

Here's what I have:

=MATCH(G2,$A$2:$A$2189,0)

where G2 is

=K2&L2

View 9 Replies View Related

Count If Column Heading Matches Criteria

Jul 28, 2006

I have data (coming straight out of another system, so whilst is seems messy, its the easiest way to have it in Excel).... where there are a number of rows (one for each employee) - then every column represents a date in the month (so there are about 30 columns)....the cells contain a number of hours worked by that employee for that day.

I have figured out how many hours they worked for each day of the week, but my client now wants to know:

for each employee - how many Mondays did they work?- how many Tuesdays? and so on

I am happy to figure out the day of the week for the first date in the month and then manual set up another column heading above the date that tells me what day it is - but I feel that Excel may actually be able to work out what day of the month it is - although the dates come across from the other system as text - April 26, 2006 etc...

So I would like a summary in my sheet that has column headings
Mon, Tues, Wed, Thurs, Fri, Sat, Sun
and then for each row for each employee - I would like the number of days that employee worked for the month by these Days of the Week.

I have looked at Count if - but I need to be able to select the range of cells to count, and also the range of cells to evaluate for the criteria and I cant figure it out!

View 9 Replies View Related

Compare Column In Different Workbooks & Return Corresponding Value Of Matches

Aug 7, 2008

I have two separate workbooks, each with a great deal of information, such as name, ssn, dates, statuses, etc. I would like to compare the SSN column for both workbooks, and when it finds a match (which there would be many) to copy the MOS cell from the same row to the other workbook. Here is my breakdown with names:

Workbook 1: Macros.xls
Workbook 2: MASS 162.xls
The SSN column is column C in both workbooks
When there is a match found between the SSN column in Macros.xls and the SSN column in MASS 162.xls, I need to copy the MOS cell (column E) from the MACROS.xls workbook to the MASS 162.xls workbook into the same row, but in column M, which is currently empty.

View 7 Replies View Related

Count Partial Text Matches In Adjacent Column?

Aug 11, 2014

I want to count the number of times partial text strings occur in a cell adjacent to another cell containing specific text.

A B
FB Milton v Town PHOTO
BS Fairfax v South
BS North v Town
BS Milton v South PHOTO
FB North v Milton PHOTO
FB Milton v South

I'm looking for the number of times "FB" and "Milton" occur in Column A when "PHOTO" also appears in Column B in the same row. From numerous searches I've tried figuring out VLOOKUP, DCOUNTA, etc.

View 6 Replies View Related

Determine If Column Of Values Contains Sequence Of Consecutive Matches

Oct 12, 2012

I am looking for a better way to determine if a column of values contains a sequence of consecutive matches. For example, column A contains single words. To determine if three consecutive cells contain the word "neuron", I enter in cell B3 the formula:

=IF(AND(A3="neuron",A3=A2,A3=A1),1,"")

And copy down. I then test column B to see if there are any non-blank cells.

If we want to change the word or the number of consecutive occurrences, I have to re-edit all the formulas in column B. I want to eliminate the helper column. I would like to put the word in B1, the number of consecutive occurrences in B2 and have a formula in B3 that will return either True or False.

I can do this with a UDF, but the user has rejected this option.

View 9 Replies View Related

Delete Rows If Opposite Column Cell Matches

Sep 6, 2006

I have a spreadsheet that is updated daily with data that falls into one of two categories: a) completely new to the sheet or b) existing from the day before but not taken care of yet. The items which fall into category a are evaluated, and notes added to the sheet. The items in category b must be compared to the new data, and duplicated lines deleted but notes from previous evaluation must be kept on the sheet. In addition, anything on the sheet that is not included in the new information needs to be deleted. I've set up a sheet with all old and new data with dates the data showed up as well as the notes associated with the old data, and have concatenated all the info from each row into column V (from another suggestion I got on a similar but not exactly the same problem which I also still haven't figured out). The sheet has been sorted by col V so any matching rows should be within 3 or 4 rows of the original. The problem is that my code does absolutely zilch!

Sub DeleteRepeatedRows()
' goes through coord. sheet and identifies duplicated lines, copies the date from the old row
' copies it into the new line, then deletes the old line
Dim rCell As Range
For Each rCell In Selection
If rCell.Value = rCell.Offset(1, 0).Value Then
rCell.EntireRow.Delete
End If
If rCell.Value = rCell.Offset(2, 0).Value Then
rCell.EntireRow.Delete
End If.........................................

View 7 Replies View Related

Formula To Make A Cell From Column A Meet Closest Value In Column B

May 11, 2014

I've got a table of different values in column A.

I'd like the cell D2 ("order") to show up at column B next to the closest value of 35.00 of column A.

Consequently, how to make "order" meet the closest several value of 35.00?

I've attached a xlxs file with more detailed description.

Ex_closest_11_05.xlsx‎

View 14 Replies View Related

If Cell In Column T Is Empty Use Column U (but Make It Negative)

Mar 13, 2014

Formula for this? If a cell in column T is empty, use column U (but make it negative)??

View 2 Replies View Related

Delete Rows If Column Has Fewer Than X Matches To Part String Match

May 5, 2008

I have data sets on multiple worksheets within a workbook (over 70). Based on the begining of a string, I need to count all instances with that begining, and if there are fewer than 12 instances, delete the entire row.

Data set example:

In this example, I need to count each instance of rows starting with 1/* - 9/*, and delete rows as mentioned. In other data sets the string might start Gi1/*, and so on. In the following code, if I do not loop, and only test against 1 value type, and ONLY run it once, it works. As soone as I try to loop through all possibilities, or run the macro a second time, it blanks out the entire worksheet, starting at row 3.

Dim c As Long
c = Worksheets(i).Range("A" & Rows.Count).End(xlUp).Row
With Range("A3:A" & c)
If Application.WorksheetFunction.CountIf(Worksheets(i).Columns(1), "1/*") < 12 Then
. AutoFilter field:=1, Criteria1:="1/*"
.Offset(1).Resize(.Rows.Count - 1, 1).EntireRow.Delete
.AutoFilter

I have also tried to concatenate a variable with my CountIf criteria, but that fails miserably.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved