For column "B" count all the 1's if column header is equal to name in column A.
For Column "C" needs to be checked if a value was filled in column "I" if yes then check if in column "L" has a value, count all these values.
=COUNTIF(A19:A28,(AND(B19:B28="YES",C19:C28=5)))
What is wrong with my formula above? I am trying to count Colunm A if the value of Column B is "YES" and Column C is equal to "5".
I am trying to count the distinct times a value shows up in a column, if another column has a 2 in it.
For example:
Columns
A, B
2,P25
2,P25
3,P5
3,P6
2,P5
The results shoud be: (2) Because I only want to count the P25 one time.
I'm using Excel 2010
I would need to count unique frequencies in column A, but only for a specified value in column B.
Example:
A|B
1|1
1|1
1|1
2|1
2|1
2|2
2|2
3|2
3|2
I am using Excel 2007 and found this formula that counts all unique frequencies in column A: =SUM(IF(FREQUENCY(A2:A10,A2:A10)>0,1))
In my example, result = 3 Now, I would need to add the possibility to count only for B=1; in my example, result should be = 2.
I have a column that repeats it self and I want to perform a count on Column B, based on the values in Column A.
Example attached : Book2.xlsx
How do I count unique values in Column A only if the values in Column B match?
A B
1 a
2 a
1 a
4 b
5 b
1 b
The formula would return "2" for "a", and "3" for b. Basically, there are names in column B, and I want to know how many unique things are in column A for each person. If there is a better way than a formula (pivot table?) that would be great - like a table that has each of the names (from Column B) and the number of unique items from Column A next to each unique name.
I am trying to write a formula where the column header of the row in which a value other than 0 exists, will display for each instance (row) where a value exists in an array spanning 3 columns. So the result cell could be any of the three column headers, or a combination thereof.
I started the formula in P2 of the GL Detail-2012 tab. File attached.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,))). Not working.
I need to look up the name in E2 in the list in column A and if it matches then lookup name in F2 in list column b, if it matches then the corresponding number in column C is displayed in column G. If neither names are in the 2 columns the words"Not on lists" is displayed in cell in column G.
The other problem is one name is spelled two different ways I want it to look for both spelling before moving on to looking up the second name.
I started with this formula but I'm getting #N/A or "not on list" when they are on the list. I'm using ranges prod_sum is columns AthruC, Last_name is range BthruC. =IF(AND(VLOOKUP(F4,prod_sum,3,0),VLOOKUP(I4,last_name,2,0)),"not on list")
I would like to display the column header of the row in which a value other than 0 exists in a cell for each instance that value exists in an array spanning 3 columns. So the result cell could be any of the three column headers.
I started the formula in P2 of the GL Detail-2012 tab. (FILE TOO BIG)
Excerpt:
Resin Sand Eliminated Segment
- (12,896.65)-
- (6,570.85) -
- (11,503.80) -
- (13,188.50) -
If there is any value other than 0 in Resin, Sand or Eliminated columns, return that column's header under Segment.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,)))
I have the following sample data set and I'm trying to return the appropriate column header based on criteria (i.e. DDD) and a number value which will be somewhere within the range of the table. In example below, the value returned should be Header 2 because the value is greater than those in Header 1 column (range H9 to L26).
Here's data table:
CriteriaHeader 1Header 2Header 3Header 4
ZZZ5.0015.0050.00130.00
ZZ5.0015.0050.00130.00
Z5.0015.0050.00130.00
YYY5.0015.0050.00130.00
YY5.0015.0050.00130.00
Y5.0015.0050.00130.00
DDD5.0015.0050.00130.00
DD5.0015.0025.0075.00
D5.0015.0020.0065.00
RRR5.0015.0015.0045.00
RR2.5010.0010.0030.00
R1.503.0010.0025.00
UUU0.751.505.0020.00
UU0.751.505.0020.00
U0.751.505.0020.00
P0.751.505.0020.00
T0.100.105.0018.00
CriteriaNumberValue
DDD10.00Header 1>>>=INDEX($I$9:$L$9,MATCH(I29,INDEX($I$10:$L$26,MATCH(H29,$H$10:$H$26),)))
[Code] ......
This works, UNLESS "My Column Header" is the last column, or second to last column, then it jumps left two columns, instead of landing on the correct column.
The purpose of this script is to select a cell directly in that column that I was searching for.
I have a sheet where i want to delete duplicate rows where column A and column B combined are equal, i.e. range(Ax:Bx) where x is the current row. I am using the macro below but cant seem to get it working as I keep getting a type mismatch error and Im not sure why.
View 2 Replies View RelatedI need a formula to return column header if there is data in the column, any data.But I also need to return the second, third, fourth header with data too
In column A row 2, I have =IF(M8"",$M$1,IF(N8"",$N$1,IF(O8"",$O$1,IF(P8"",$P$1,IF(Q8"",$Q$1,IF(R8"",$R$1,IF(S8"",$S$1,IF(T8"",$T$1,""))))))))
This returns the row 1 header for the first instance of data in row 2 columns M thru T But in B2, I need the second header with data in the column.
I need the results in yellow (1st, 2nd, 3rd, 4th) from the array to it's left
1St match2nd 3rd 4thColumn MColumn NColumn OColumn PColumn QColumn R
Column MColumn PColumn QData data2Data3
Column NColumn OColumn PColumn R Data Data2 data3 data4
Would use match/index but can't increment it to the second or 3rd match
I have a table full of phone numbers and call durations.
In A2:A6160, I have 162 different phone numbers and in U2:U6160, I have the call durations for calls made to those numbers.
In a separate spreadsheet, I have each number listed in Column A and in Column D, I want to display the average call duration for each of the numbers.
I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
I need to group all records where the values in column A are equal. BUT I needed them sorted by another column (the whole sheet, not just within each group). Currently, all of the values in column A are listed in random order. Is there any way to do this manually?
to elaborate a bit further, consider the following:
Columns: A-B-C-etc.
1-Z...
1-X...
4-X
3-Y
4-Y
2-Z
Basically, I need to group all of the "1"'s and all of the "4"'s so that the extra values will show underneath the other. HOWEVER, I need them to be sorted such that the order in which they appear are XYZ. So the goal would be:
1-X
1-Z
4-X
4-Y
3-Y
2-Z
I'm looking for a formula that will return the column header (a date) of the first instance of a number greater than 0. For example if columns A through S had dates as in row 1 (header row), and in row 2, every column contained a 0 up until column P, I would want the date (Row 1, Column P) returned? I think this might be a sort of index/match formula, but I am not very familiar with these.
View 3 Replies View RelatedI have a spreadsheet with several columns (all column names are in row 1).
I have 2 of column names. Note that their actual column# might change so the macro would have to look for the column name and NOT the column position ...
I have a data set with the weeks of the year as my column headers and a value of 1 (from a pivot table) in a distinct row value (removed for privacy) showing whether it existed in a given week based on pre defined criteria. What i need to do is ID the first (from the left) non blank cell in each row and then return that cells column header. I then need to do the same for the last (from the left) non blank cell in each row and then return that cells column header. On the attached I've put values in column N and O to show an example of what I need to return using a formula.
View 7 Replies View RelatedNeed a Macro to delete all rows containing values less than or equal 300 in column A
View 5 Replies View RelatedI'm trying to count if there are situations where column a is equal to a specific number and column b is equal to another number.
both columns are numbers. Does anybody have a good idea how to do this, maybe countif, but i am not sure how to do more than one item with that.
I have VBA code to perform some actions on data in excel file and then convert all that data into semi-colon separated CSV/text file (code below).
Now, all I want is to add VBA code in the existing macro to find a column header (say, "Application date") and then convert all the dates into YYYY-MM-DD format. The original values in this column don't have a fixed date format.
Code:
Public Sub ExportToCsvFile(FName As String, _
Sep As String, SelectionOnly As Boolean, _
AppendDataOnExistingFile As Boolean)
Dim WholeLine As String Dim FNum As Integer
Dim RowNdx As Long Dim ColNdx As Integer
[code]....
I need to apply two criteria to a COUNTIF. Eg, I need to count if one column is equal to "N" and another column is equal to "N/A", taking both criteria into account. At the moment it seems to knock one out when I try applying both!
View 9 Replies View RelatedI have software (SAS Add-In for Microsoft Office) that loads external data into Excel. The data has a title, header, and rows/columns. It automatically creates a named range such as Table1. The named range does NOT include the headers.
Here is an example:
Code:
SASApp:SASHELP.CLASS
Name
Sex
[Code]....
As above, can I dynamically derive the column number based on the header row of the named range, where such named range refers to a table?
On a related topic, can I derive the column name given the column number? For example, in pseudocode:
Code:
For currCol = firstCol To (firstCol + lastCol - 1)
' Assume a function called ColumnName
Debug.Print ColumnName(currCol)
Next
I have two columns. Column A had numbers and column B has names. I need a count from column A for each name in column B.
View 1 Replies View RelatedI have two columns with dates. Colum A has the date of the deadline of a document while column b has the day it was sent. Column X will display the difference if its a positive integer ( i.e. if the document has been sent after the deadline). Now i have another column Y which displays the month as an integer of when the document was actually received.
Now i need a counter which will count the number of instances a positive integer is registered in column X according to the month in column Y. I have been trying everything but cant figure a simple way to do it. Im doing this so i can be able to see how many documents are sent after the deadline per month.
I think I am working all around this in Excel 2003 and feel like I am in the neighborhood, but can't seem to quite get there. On sheet1 I have 2 columns of 100s of rows. All of the cells in column A will be filled in with a date as time goes by (1-May-09 for example). Several of them may be 1-May-09 as a matter of fact. In column B, some of the cells will have a number in them and some of them will be empty. On sheet2, I want to construct a formula that returns a count of cells in column B that have a number in them based on a specific date in column A. For example:
AB
1-May
1-May777
1-May
1-May
1-May
2-May999
3-May
2-May
1-May
2-May111
1-May
If I could get the formula right, it would return an answer of 1 for 1-May in the example, because only 1 of the 1-May entries in column A has a number in the adjacent cell in column B. A formula for 2-May would return an answer of 2 since only 2 of the 2-May entries in column A have numbers in the adjacent cell in column B, and so on for the month. If I understand things right, there are too many arguments for COUNTIF. It seems that SUMPRODUCT should work, but I can't make it so.
I have a formula that counts if a date range is present. However I need to change it to count another column only if that date range is present. For example a17 a50000 the user will enter the date of the order. and in column B has the order number. I want the formula to count the order numbers for a data range in column A.
Here is what I have but it is counting the dates in col A not the order numbers in B?
I am trying to Count (or counta?) cells in one column if they have data but only if within a date range in another column.
So, in the example below, I would want to count how many cells in column E have data in them, but only if the date in column A falls between Jan 1 2014 and Jan 5 2014. (In this case, result should be 4).
A
B
C
D
E
01/01/2014
[Code].....
I need to populate sheet 1 of the spreadsheet attached.
I have tried several formula's but don't work and am getting desperate!
I need to count Column A of sheet2, when "Adverse SEN" occurs but only when there is an "x" in Column B of sheet 2 appears next to "Adverse SEN".
So basically i need to populate Sheet1 of the spreadsheet with the data is sheet2 of the spreadsheet.
I need a formula to calculate how many time an adverse SEN was - where there is an x - resubmitted, approved at meeting, delegate approval obtained, approval outstanding, rejected or approval not required.
I am using excel 2003, so please don't provide me countif functions.