Calculation From Column A To Column B Is Not Working
Feb 26, 2007
i have a list of numbers in column A and B and C etc and i am trying to do some simple math for every 4th cell
Const startrow = 1
Const endrow = 60000
Range("c3:ba6").Value = 0
Range("c9:ba12").Value = 0
For y = 1 To 2
x = 0
For i = startrow To endrow Step 4
If Cells(i, y ).Value = 0 Then
x = x + 1
Else
If x > Range("c3").Value Then
Range("c3").Value = x
x = 0
Else
x = 0
End If
End If
Next i
Next y
however it can add the number in column A but never add the number in column B.
View 9 Replies
ADVERTISEMENT
Jul 29, 2014
I have a spreadsheet where I am trying to quantify which items meet certain conditions.
In columns J, K and L I have dates. Column M is an associated $ amount. Column N calculates the number of days between J and K and column O calculates the number of days between L and K.
I have to get the dollar amount for column N over 45 days and in column O the dollar amount under 120 days.
My formula for column N is =sumifs(M6:M1166,N6:N1166,">45") and for column O is =sumifs(M6:M1166;O6:O1166,"
View 2 Replies
View Related
Nov 9, 2009
I have Column A to show the Project I am working on and Columns B-M show the months of the year with the figures under certain months. In Column N I just want to show where a figure falls under a certain month, I want Column N to show the month (header) that particular figure is under e.g. N2 should return a value of "March", N3 ro return a value "June" and N4 to return a value "April/September".
View 5 Replies
View Related
Sep 24, 2013
Identtime altlatlon
a3340.3320004551
a3360.3325004450
a7880.3350004425
a5210.3310004910
a8520.42000453
a9560.51002030
a8410.5580002063
a9650.680002465
I need a formula that recognizes identical times then takes the difference between the altitude, lat, long of the two identical times.
So ideally the calculation that would be performed.
Ident (a334)-(a336) 2000-2500 45-44 51-50
Ident (a334)-(a788) 2000-5000 45-44 51-25
Ident (a334)-(a521) 2000-1000 ''''''' ''''''''''
Ident (a336)-(a788) 2500-5000 '''''' '' ''''
Ident (a336)-(a521) 2500-1000
Ident (a788)-(a521) 5000-1000
I created a pivot table to try to calculate the difference but it cannot do it an a algorithmic type fashion like this. Then eventually I need to conditionally format it to if all three meet a certain criteria that it will put it in a separate chart only if all three conditions are met.
So if Ident (a334)-(a336) 500 1 1 (ex. of all three criteria being met [actual parameters not important but these values will be flagged in my conditional formatting])
This needs to then be put in a separate chart with all other data that meets all three criteria.
So the steps I need to perform this function:
1. Does Ident "x" equal Ident "y" time?
Yes: Take difference between all three parameters. Do all three meet Criteria?
Yes: Put all calculated info in separate chart if they meet all three criteria. Does Ident "x" time equal Ident "z" time?
Yes: Take difference between all three parameters. Do all three meet Criteria?
No: Generic Algorithim.xlsxEnd
Yes: Put all calculated info in separate chart if they meet all three criteria. Does Ident "x" time equal Ident "aa" time?
No: End
No: End
No: Move on to does Ident "y" time equal Ident "z" time?
[Rinse, Wash, Repeat]
View 1 Replies
View Related
Mar 19, 2014
How would I fix my formulas from not working when I filter other columns? It is a simple =A1/A3 cell and this calculation is down the full column. When I filter any column, the calculation does not stay with the assigned cells.
View 2 Replies
View Related
Jun 29, 2013
Criteria
Column B
Constant
Variable0
Variable1
Variable2
Variable3
2
[Variable2/Constant]
5
123
43
45
76
[Code] ..
This is my table. What formula should I use so that Column B shows the calculation depending on the Criteria column?
View 9 Replies
View Related
Jan 23, 2014
I currently have a workbook (Unconfirmed Application Audit 02) which is the result of an audit of applications on PCs. I have come up with a macro which will insert new columns into the sheet and fill those columns with data, should the application listed, have a replacement specified in the AppRM file. The macro works fine for column G, in that it pulls through the new software manufacturer name but column H should pull through the new product name and I should display the new product version and they don't. To me, it looks like the exact same formula in each column apart from the column reference to get the information from.
View 7 Replies
View Related
Apr 24, 2009
I'm trying to work out how to fix the formula below to take into account and ignore and text entries, while giving me the result of the sum of column K minus the sum of column J. If I delete the text entries, the code works but I need the text entries to stay where they are. I've attached a sample sheet with fake info to explain whan I'm trying to do.
Cell N28 on the 'MGMT INFO' tab contains the following formula:
=IF(ISERROR(SUMPRODUCT((Sheet01!$K$1:$K$1000)-(Sheet01!$J$1:$J$1000))),0,(SUMPRODUCT((Sheet01!$K$1:$K$1000)-(Sheet01!$J$1:$J$1000))))
Columns J and K on the 'Sheet01' tab contain the Pay and Invoice information for all the work planners for that client that I'm trying to find the difference between. Each work planner has 'Pay' and 'Invoice' also in that column though, one entry per planner which is causing the SUMPRODUCT formula to screw up.
View 3 Replies
View Related
Feb 4, 2013
I have recorded the following code, but while it works during the recording stage it doesn't within the macro.
Range("D18").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.TextToColumns Destination:=Range("D18"), DataType:=xlDelimited, _
TextQualifier:=xlDoubleQuote, ConsecutiveDelimiter:=False, Tab:=False, _
Semicolon:=False, Comma:=False, Space:=False, Other:=False, FieldInfo _
:=Array(1, 1), TrailingMinusNumbers:=True
The data within column D is imported dates and I am doing the text to columns to get a later macro to recognise the cells as dates and not text.
(The code seems to work for a few of the cells but not all of them.)
View 9 Replies
View Related
May 2, 2014
I want to use TextToColumn function of excel using vba. I tried recording a macro to get the syntax and then make a few changes to it; But it is not working when i run it from vba ... if i do it manually it is working very nicely but it just skips that step in vba.
i have pasted my code
Code:
On Error Resume Next
rngReqIDcodWhole.TextToColumns Destination:=rngReqIDcodWhole, DataType:=xlDelimited, _
TextQualifier:=xlDoubleQuote, ConsecutiveDelimiter:=False, Tab:=False, _
Semicolon:=False, Comma:=False, Space:=False, Other:="""", FieldInfo _
:=Array(1, 2), TrailingMinusNumbers:=True
rngReqIDcodWhole is a column range
the text that the code needs to break is as follows
Code:
_BRE.RFs.DocPackage.Decpages.CreateContent_DECPAGES_RF(dre, sec, "FormID","FormID", 1, "DecR_1", "DecR_1", false);
View 7 Replies
View Related
Feb 24, 2014
Ok so I am trying to streamline the Shirt ordering process at my work. I have made a table with Employee names as Column A, then Row 1 is shirt sizes from small to XXXL. The Cell values are going to be the colors people want. I want to total the number of each size/color combination. But someone may want more than one of the same color. For instance you would enter "BK, BK" if you wanted 2 black shirts of that size. This is where the issue with COUNTIF comes in. If a cell has the same value twice, it only counts it as one because counts the cells with an instance of a value, not the actual count of instances. Is there a way to make COUNTIF or a better function for this?
View 6 Replies
View Related
Mar 15, 2014
I have a below formula which extracts the v and number attached to it I would like to copy this across all columns and change row for each column. So for example 1st column reference will be B4, the second column would have a reference B5 and so on, it's probably worth to mention that cells I am referencing to are in other sheet hence why there's Ref! before B4 is this why absolute column and relative row not working?
View 5 Replies
View Related
May 13, 2014
I have code for auto insert row, when i m getting to new row column Q formula not working
remove the auto generate serial number in column column A, only i want to insert auto with column Q formula to work.
find enclosed a worksheet for your ref.
Please see the below auto insert code;
Private Sub Worksheet_Change(ByVal Target As Range)
Dim O As Range
Set O = Range("O:O")
If Intersect(Target, O) Is Nothing Then Exit Sub
Application.EnableEvents = False
roow = Target.Row
Cells(roow + 1, 1).Value = Cells(roow, 1).Value + 1
Cells(roow + 1, 2).Select
Rows(Target.Row + 2).Insert
Application.EnableEvents = True
End Sub
View 1 Replies
View Related
Aug 28, 2009
I try to edit comments in cells of a certain column and nothing happens. I am able to edit other comments throughout the spreadsheet, but when I select "edit comments" for these particular cells, no edit box is displayed for editing. It worked fine a couple of weeks ago.
View 11 Replies
View Related
Nov 4, 2013
I got a problem using AutoFilter with VBA in Excel.
It works well for regular filters, but filtering the date column does not work as intended. The column is formatted as date, I can filter it manually and absurdly, if I run my code, it filters nothing but when I check the filter and then only click ok (no change being applied to the filter criteria), it starts filtering correctly.
Here is my code:
Code:
ws.ListObjects(SheetName).Range.AutoFilter Field:=3, Criteria1 _
:=">" & CDate([datecell]), Operator:=xlAnd, Criteria2:= _
"
View 1 Replies
View Related
May 21, 2013
I have a conditional formula that highlights dates red when it meets a certain criteria. The file named MS Working, the conditional formatting formula (formula below) works as it should with no issues. The other file MS NOT Working, the conditional formatting formula (formula below) has stopped working as it should. What I did? I inserted a new column to the left. Where the MS Working file has only 1 column to the far left, the MS NOT Working file now has 2 columns to the far left.
It seems as if the formula adjusted itself when I inserted the new column; however, its not working.
MS Working
Conditional Formula: =AND(TODAY()>B3,NOT(ISODD(COLUMN())),B3<>"",OR(C3="",C3=0),B3<>0)
MS NOT Working
Conditional Formula: =AND(TODAY()>C3,NOT(ISODD(COLUMN())),C3<>"",OR(D3="",D3=0),C3<>0)
View 3 Replies
View Related
Apr 1, 2014
I've been trying to modify the following code to find the value "Module Index" in column A. I then need the code to save the row number that the value was found in and copy a range from ("A2:V row number")
I keep getting an "object required" error on the following code line
Set intFindrow = wbTargetBook.Sheets(strName).Range("A:A").Find(What:="Module Index", LookIn:=xlValues)
[Code] .....
View 2 Replies
View Related
Sep 29, 2012
I would like to write a macro that can return the number of hours worked during the night shift.
In this case, the night shift starts at 21:00pm and ends at 6:am next day.
The column "I2" returns the number of hours worked during the day - formula ((F3-C3+(F3<C3))-(E3-D3+(E3<C3)))*24);
The column "J2" gives the overtime hours taking into account the number of regular hours allowed - IF(OR(I3="",I3<6),"",IF(I3>H3,"",I3-H3));
Cells "C3:F13" allows users to set up (using a data validation list) starting time, lunch in, lunch out, end time ( columns C and D AM; E and F PM);
My question is: How can I calculate night hours in column K, without having conflits with numbers returned in column I (worked hours)? Is it possible to write a macro for this?
Below please see the table:
B
C
D
E
F
G
H
I
J
K
1
Name
Start Time
Lunch In
Lunch Out
End time
BREAK?
Regular hours
Worked Hours
Overtime
Night Shift
[Code] ......
View 1 Replies
View Related
Jun 30, 2014
I have a excelsheet that looks like this:
Column A | Column B | Column C
Los Angeles | Fire Dept | 3
Los Angeles | Health Services | 12
New York | Fire Dept | 8
New York | Health Services | 22
New York | Internal Services | 100
New York | Public Works | 7
Chicago | Health Services | 15
Chicago | Public Works | 56
Chicago | Social Services | 4
And I am trying to make it look like this:
Fire Dept
Health Services
Internal Services
Public Works
Social Services
Los Angeles
3
12
New York
8
22
100
7
Chicago
15
56
4
View 8 Replies
View Related
Jan 31, 2008
I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
View 9 Replies
View Related
Oct 30, 2013
I'm currently trying to set up a sheet ...
When setting up a Direct Debit There are 3 options, the 7th, 17th and 27th. I've put these into a drop down list. I need this list to be slightly dynamic. I must allow 10 working days from the date of the arrangment before I can apply the DD.
To explain further. If someone were to want to set up a DD and spoke to me today. If they then requested the DD be taken on the 7th, I wouldn't be able to set it up until the 7th of December as 10 working days are required. I'd like the list to reflect this. I can do it in OO with a simple if / switch but excel is a strange creature and I'm not sure how to approach the problem.
From that I think I also need to calculate the number of weeks remaining in the current financial year. I think I should be able to do this by using the Today() function and some maths.
View 1 Replies
View Related
Apr 22, 2009
What I'd like to do is; If column C contains data then insert a blank column and shift column C to the right.
View 4 Replies
View Related
Apr 4, 2014
I require calculating difference between two columns. (Actual and Estimated).
Difference between these two numbers are calculated in third column, but it is reset every time actual number is non-zero.
Scenario:-
-Estimated Numbers are always followed by an actual number.
-After actual number is obtained, estimated numbers till that date will be added and deducted from actual number.
-After this, again estimated number will be added till next actual number is obtained for deduction.
If estimated number is not followed by actual number, then no need for difference calculation.
View 3 Replies
View Related
Apr 25, 2014
For column "B" count all the 1's if column header is equal to name in column A.
For Column "C" needs to be checked if a value was filled in column "I" if yes then check if in column "L" has a value, count all these values.
View 5 Replies
View Related
Aug 13, 2014
I want to compare two columns. I would like to see if the contents of column B appear anywhere in column A, for any amount of rows, and if it does, to place the match in col C.
So in the example below, red in B1 would be checked in A1 through A1000 or however long A is. When any row has red, place that match in that row for C.
This would be repeated until all rows in B are complete.
Example
Col A: red
Col B: red
Col C: red
Col A: red
Col B: blue
Col C: not found
View 6 Replies
View Related
May 29, 2014
I have set of data Pasted in 4th row, in the top row 44 columns values assigned i want move data from set of data to different column among these 44 columns
Like "Service Order ID" is 1 column in set of data ,it move to second column of top row
Some of column need to delete. (Service Order Type,Service Order Description,Created By,Status,Contact,Expected Delivery Date,
Creation Date,Priority,Net Value,Currency,External Reference,Reference Date)
I want Get output result in same sheet (Actual).
View 3 Replies
View Related
Jan 27, 2014
I am trying to write a sub for using vlookup. To enable the vlookup, I want to return a word in a cell to the cell in the next column. I use the InStr function, but it doesn't work. They all return as "Other".
Attached is the worksheet and here are the codes : Capture.JPG
[Code] .....
View 11 Replies
View Related
Jan 16, 2009
Just need to delete some hyperlinks in column A on 50+ worksheets. Thought a loop through all the worksheets would do it. Only works on active sheet. Forgive my ignorance, don't really even know where it goes, once it works - module or workbook?
View 2 Replies
View Related
Oct 6, 2008
I have a spreadsheet with three columns (A,B,C). I want the third column C to be column A - B (A minus B) for each row, but only if there is a value in column B.
If there is no value in column B, then I want that row in Column C to just stay blank.
View 4 Replies
View Related
Aug 3, 2006
I need to combine rows that have the same value in column a and column b to the same row by offsetting column c to the next available column. For example, I would like the first 6 rows of the provided sample to appear like this.
0014B22<@44>Soil Properties and Qualities<@44>Soil Properties and Qualities<@44>Soil Properties and Qualities
0014B23<@28>Coursey<@28>Ogles<@28>Shelocta
Sometimes the values are the same in column c, sometimes they are different. I do not want to delete duplicate rows where they are the same. Sometimes there are 2 rows that have the same values in column a and column b, other times there may be 3 or even 4 rows with the same values in column a and column b. Regardless, I would like the values in column c combined on the same row in the next available column. It would be nice if the duplicate column a and column b rows (with a null column c cell) were then removed, but I could do that in the next step.
0014B22<@44>Soil Properties and Qualities
0014B22<@44>Soil Properties and Qualities
0014B22<@44>Soil Properties and Qualities
0014B23<@28>Coursey
0014B23<@28>Ogles
0014B23<@28>Shelocta
0014B24<@33><i>Available water capacity:<p> High (about 11.5 inches)
0014B24<@33><i>Available water capacity:<p> Very low (about 2.9 inches)
0014B24<@33><i>Available water capacity:<p> High (about 9.0 inches)
0014B25<@33><i>Slowest saturated hydraulic conductivity:<p> Moderately high (about 0.57 in/hr)
0014B25<@33><i>Slowest saturated hydraulic conductivity:<p> High (about 1.98 in/hr)
0014B25<@33><i>Slowest saturated hydraulic conductivity:<p> Moderately high (about 0.57 in/hr)
0014B26<@33><i>Depth class:<p> Very deep (more than 60 inches)
0014B26<@33><i>Depth class:<p> Very deep (more than 60 inches)
0014B26<@33><i>Depth class:<p> Very deep (more than 60 inches)
0014B27<@33><i>Depth to root-restrictive feature:<p> More than 60 inches
0014B27<@33><i>Depth to root-restrictive feature:<p> More than 60 inches..............
View 9 Replies
View Related
