Now the above would be entered on each corresponding day throughout the month and I would like to keep a running total at the bottom. I thought I had gotten the formula worked out, but in the slots at the bottom there is a total of 152 but there aren't any numbers entered for it to total so what I did was place a -152 after the above formula which brought it to 0 then started to enter my numbers but they were off by 30 I think it was.
I have a program where I can update the calibration due date of an item. I have attached a cut down version of my program showing the relevant areas. There is usually password protection on the worksheet so it can only be edited via the form (the vba coding removes the password protection before editing, then re-enables the password protection after editing). The "Update Calibration" button is usually on a "Menu" sheet.
Once the form is opened a serial number is typed in the textbox. The calendar button is then clicked, which brings up another form with the calendar on. The due date is selected on the calendar. When "OK" is clicked, the date label caption is then changed to the selected calendar date. When "Submit" is clicked, the spreadsheet will search for the Serial Number, once found, the label caption (being the date selected) will be entered into the cell to the right of the serial.
If the day selected on the calendar is greater than 12 the date is entered correctly onto the sheet. example: calendar date selected = 15/01/2010. shown on sheet as 15/01/2010. However, if the day selected on the calendar is 12 or less, the date is for some reason entered incorrectly onto the sheet. example: calendar date selected = 08/12/2010. shown on sheet as 12/08/2010???? What is going on here? how come the day and month are swapped around if the day is less than 12????
I want to select a date of choice from a calendar in a field within an Excel spreadsheet.
I do not know how to do userforms and so that is why I wonder if I can add this in just a spreadsheet.
This is how far I have gotten so far: After doing the following, I have a static calendar setting in my spreadsheet like a text box showing the current date.
Developer Insert More Controls Calendar Control 12.0
I'm trying to make my life a little easier at work. Here is what I am trying to do. I'm trying to create a "calculator" that will tell me the date that a client will leave my program. I understand that I can simply do xx/xx/xxxx-15 and it will get me a new date, easy. Here is the kicker...My office only utilizes 30 day calendars. Regardless if the month has 28 or 31 days, in the eyes of my agency it will have 30.
i'm been trying to mess around with it for 3-4 days now and I can't quite figure it out. I have attached a sample spreadsheet what i'm i'm trying to do.
I would eventually like to create this to be a little interactive (like a pop up or something that is more user friendly) but i'm just itching to get it to work!
I am trying to achieve is to get a calendar layout using an array formula. The formula I'm using is from a workbook that I had found on the web and it works perfectly. It was in a general calendar layout when I downloaded it and I have adapted it to run from day 1 - the last day in a month from left to right.
My starting day for each week is Monday (the original workbook used Sunday). The problem though is, when I get to a month that starts on a Sunday, it starts populating from the first Monday, and thus losing the 1st day of that month. I have attached an example.
I am using a great pop up calendar without ActiveX made by a guy called Phil Johnson. When you click a specified cell the calendar appears. The only problem is that the calendar doesn't default to today's date when it opens.
I have the original file Calendar source code if anyone needs it.
I'm trying to write a formula to return the AVERAGE by calendar quarter, IF the quarter has ended. For instance, IF Jan = 5, Feb = 20, Mar 5, Average would be 10. But, if Mar was 0 (only meaning no activity) I still need it to calculate.
The formula I started with is - =IF(A1=0,0,AVERAGE(A1:A3)
This works only if cells A1:A3 have a value greater than 0. How can I write the formula so that as long as A3 is not blank that it will return the AVERAGE?
This formula will return will return the date of Nth day-of-week for a given month and year. For example, it will return 26-March-98 for the 4th Thursday of March, 1998. Days-of-week range from 1 to 7, with Sunday = 1 and Saturday = 7.
I have come accross this calendar online and it suits my requirements, however, the month s currently static and the year is dynamically controlled by a spin button.
The formulas in the relevent days are as follows
Day 1 =IF(AND(YEAR(JanOffset+1)=calendarYear,MONTH(JanOffset+1)=1),JanOffset+1,"") Day 2 =IF(AND(YEAR(JanOffset+2)=calendarYear,MONTH(JanOffset+2)=1),JanOffset+2,"")
and so on, I need the formula and the spin button the also change the month as well as the year.
Is there a formula to set the a date in Excel based off the next full calendar quarter? In cell G2 I have the contract date: 01/26/06. I would like to have a formula in I2 that displays the first day of the next full calendar quarter, which is 04/01/06
More example dates: if my contract date is: 10/21/05 my start date is: 01/01/06
I am writing a formula that will sum data for a 12 month period that is not based on a calendar year. For example may have data starting in June 2011 running to date, but not every month. If I set a start date for Year 1, say April 2012, I need to see Year 0 numbers (anything prior to April 2012), Year 1 numbers (April 2012 to March 2013), Year 2 numbers (April 2013 to March 2014), and so on. Date format is currently mmm-yy.
If this could be performed via a macro which references the database (spreadsheet), then even better. The database will contain multiple columns, of which two will contain the date and corresponding number respectively.
I currently have a worksheet that when a user clicks on the cell, a calendar form opens. From here they can select a date, click ok, and the date gets placed in the corresponding cell they clicked on.
Now if the user needs to change that date, i want them to be able to click on the cell again, and when the calendar opens, the date in the cell would be selected on the calendar. I was able to do this in a userform, but im not sure how to edit it to work on the worksheet. I am using the below to populate the calendar.
Code: private sub worksheet_selectionchange(byval target as range) if not intersect(target,range("aa16:aa24")) is nothing then .show calendar When the user clicks the date, the below code places it in the cell.
Code: private sub ok_click() with active cell .value=calendar1.value end with unload me end sub
Now the below code was used when I was using a userform, but im not sure how to edit this to pull the date from the active cell.
Code: privatesub userform_activate() me.calendar1=date if not tb is nothing then if isdate(tb.value)then me.calendar1.value = tb.value end if end sub
I have a spread sheet that requires people to put dates in certain cells. I was wondering if it is possible to have a small calendar pop up when the cell that requires a date is clicked on. The calendar would need to show the current month, and future months for the calendar year. I’ve seen this feature in OneNote 2007, and wasn’t sure if this same feature could be created for excel. I’m not sure if this can be done by a macro or not.
I was wondering can I take a calendar and then put hyperlinks or vba to make a sheet if clicked on.
So If I click on an icon on a date, it will copy a certain template sheet, then link it to that date and that icon.
See an excel calendar, I have a few others to play with aw well.
But this one gets updated on the same the page and not sure how the links/icon would follow the dates. I was hoping for maybe 3-4 different icons on a date.
Attached is the file wherein I am trying to make the scheduling gantt for UAE calendar where the weekends are Friday and Saturday. I am not able to format sundays as workdays some how through my conditions.
Is there any simple way to build a calendar in Excel? Ideally, all events will be listed on one sheet by date and the calendar will display the events on their respective dates. Is this possible?
Got this neat Calendar from another thread on this site,but it has problems. Played around with what little skills I have with no luck. When you open the calendar go to Jan, 1992 click on first four days and everything works. When you click on Thu 2 the problem begins.
I'm trying to make it so that when a user clicks on a certain cell, a calendar pops up so they can pick a date. This seems like a pretty common thing to want; I hope Microsoft puts it into the next release.
Anyway, I've read the tutorial found at [url]which tells you how to create a userform, add the calendar control to it, etc.
I've also modified it so that the calendar comes up when the user clicks on a certain cell, and so that the form closes when they choose a date.
I had to use the selection_changed subroutine to tell if someone clicked on the cell, but there are some flaws.
First, moving over to the cell with the keyboard arrows brings up the calendar (undesired result; I only want it to come up with clicking)
Second, if the cell is already selected, clicking it doesn't bring up the calendar since the selection didn't change (also undesired; I would like the form to come up whether the cell was previously selected or not).
Is there a way to set up a designated cell in a spreadsheet with a drop-down box that will have a calendar, so that when you click on a date in the calendar it puts that date in the cell?
I have the following worksheet ,named "Calendar", to make an annual calendar and I'm wondering if there's a way to use it to make a calendar in worksheet named "NovemberDaily". On the worksheet named "NovemberDaily" I want to put in cells C14, G14, K14, O14, S14, W14, and AA14 "11/1/2007" if the weekday of the week matches the date"11/1/2007". Is this possible or is there an easier way of accomplishing this. I'm needing the date (e.g. 11/1/2007) in the cells mentioned because it ties into another formula that I'm using later in the worksheet.
I have created a pop up calendar using VBA with the help of VBA Tips at www.fontstuff.com/vba and it works very well. However it has the default date of 12 March, In the tutorial that i used there was some code to use todays date if the cell (in which i was going to put a date) is empty. Which is as follows
Private Sub UserForm_Initialize() If IsDate(ActiveCell.Value) Then Calendar1.Value = DateValue(ActiveCell.Value) Else Calendar1.Value = Date End If End Sub
yet when the calendar does pop up, the date remains at 12 March (the calendar in the visual basic editor reflects the date correctly). I've tried to change numerous amounts of properties, without success
provide an input (1,12, or 123 would be the only input selections), then the vba needs to hide all rows that are not equal to the input
I have developed a type of calendar in excel with the following setup. There are five key headers and each header has a code it pertains to, either 1,12, or 123. The spreadsheet is set-up like so....
Column A B Key Project
12 A 1 B 123 C 12 D 12 E 123 F 1 G
So basically vba code that will produce a pop up and ask for a key then after the key is entered it will display rows that have an equal key in column A and hide all other rows.
Fromt he above ex. if "12" was entered the spreadsheet would show:
