Automatic Calendar Using VBA

Feb 9, 2009

provide an input (1,12, or 123 would be the only input selections), then the vba needs to hide all rows that are not equal to the input

I have developed a type of calendar in excel with the following setup. There are five key headers and each header has a code it pertains to, either 1,12, or 123. The spreadsheet is set-up like so....

Column
A B
Key Project

12 A
1 B
123 C
12 D
12 E
123 F
1 G

So basically vba code that will produce a pop up and ask for a key then after the key is entered it will display rows that have an equal key in column A and hide all other rows.

Fromt he above ex. if "12" was entered the spreadsheet would show:

12 A
12 D
12 E

View 9 Replies


ADVERTISEMENT

Calendar Control 11: Selected On The Calendar Is Greater Than 12 The Date Is Entered Correctly Onto The Sheet

Jan 8, 2010

I have a program where I can update the calibration due date of an item. I have attached a cut down version of my program showing the relevant areas. There is usually password protection on the worksheet so it can only be edited via the form (the vba coding removes the password protection before editing, then re-enables the password protection after editing). The "Update Calibration" button is usually on a "Menu" sheet.

Once the form is opened a serial number is typed in the textbox. The calendar button is then clicked, which brings up another form with the calendar on. The due date is selected on the calendar. When "OK" is clicked, the date label caption is then changed to the selected calendar date. When "Submit" is clicked, the spreadsheet will search for the Serial Number, once found, the label caption (being the date selected) will be entered into the cell to the right of the serial.

If the day selected on the calendar is greater than 12 the date is entered correctly onto the sheet. example: calendar date selected = 15/01/2010. shown on sheet as 15/01/2010. However, if the day selected on the calendar is 12 or less, the date is for some reason entered incorrectly onto the sheet. example: calendar date selected = 08/12/2010. shown on sheet as 12/08/2010???? What is going on here? how come the day and month are swapped around if the day is less than 12????

View 4 Replies View Related

Excel 2007 Calendar Control - Select Date From Calendar In A Field

Dec 24, 2009

Using Excel 2007 Calendar Control:

I want to select a date of choice from a calendar in a field within an Excel spreadsheet.

I do not know how to do userforms and so that is why I wonder if I can add this in just a spreadsheet.

This is how far I have gotten so far: After doing the following, I have a static calendar setting in my spreadsheet like a text box showing the current date.

Developer
Insert
More Controls
Calendar Control 12.0

View 9 Replies View Related

Phil Johnson's Calendar - Pop Up Calendar Without ActiveX

Mar 7, 2009

I am using a great pop up calendar without ActiveX made by a guy called Phil Johnson. When you click a specified cell the calendar appears. The only problem is that the calendar doesn't default to today's date when it opens.

I have the original file Calendar source code if anyone needs it.

View 4 Replies View Related

Populate Calendar If Date In Associated Cell Show Date On Calendar

Apr 4, 2013

I currently have a worksheet that when a user clicks on the cell, a calendar form opens. From here they can select a date, click ok, and the date gets placed in the corresponding cell they clicked on.

Now if the user needs to change that date, i want them to be able to click on the cell again, and when the calendar opens, the date in the cell would be selected on the calendar. I was able to do this in a userform, but im not sure how to edit it to work on the worksheet. I am using the below to populate the calendar.

Code:
private sub worksheet_selectionchange(byval target as range)
if not intersect(target,range("aa16:aa24")) is nothing then .show calendar
When the user clicks the date, the below code places it in the cell.

Code:
private sub ok_click()
with active cell
.value=calendar1.value
end with
unload me
end sub

Now the below code was used when I was using a userform, but im not sure how to edit this to pull the date from the active cell.

Code:
privatesub userform_activate()
me.calendar1=date
if not tb is nothing then
if isdate(tb.value)then me.calendar1.value = tb.value
end if
end sub

View 1 Replies View Related

Can I Add A Calendar

Feb 22, 2008

I have a spread sheet that requires people to put dates in certain cells. I was wondering if it is possible to have a small calendar pop up when the cell that requires a date is clicked on. The calendar would need to show the current month, and future months for the calendar year. I’ve seen this feature in OneNote 2007, and wasn’t sure if this same feature could be created for excel. I’m not sure if this can be done by a macro or not.

View 9 Replies View Related

Calendar Into Log For Many Things

Nov 3, 2008

I have a few excel calendars.

I was wondering can I take a calendar and then put hyperlinks or vba to make a sheet if clicked on.

So If I click on an icon on a date, it will copy a certain template sheet, then link it to that date and that icon.

See an excel calendar, I have a few others to play with aw well.

But this one gets updated on the same the page and not sure how the links/icon would follow the dates. I was hoping for maybe 3-4 different icons on a date.

View 7 Replies View Related

Scheduling For UAE Calendar

Jan 16, 2009

Attached is the file wherein I am trying to make the scheduling gantt for UAE calendar where the weekends are Friday and Saturday. I am not able to format sundays as workdays some how through my conditions.

View 2 Replies View Related

Make A Calendar

Jul 23, 2009

Is there any simple way to build a calendar in Excel? Ideally, all events will be listed on one sheet by date and the calendar will display the events on their respective dates. Is this possible?

View 2 Replies View Related

Calendar Not Working?

May 23, 2013

Got this neat Calendar from another thread on this site,but it has problems. Played around with what little skills I have with no luck. When you open the calendar go to Jan, 1992 click on first four days and everything works. When you click on Thu 2 the problem begins.

View 14 Replies View Related

Calendar Macro

Sep 19, 2007

I have the following Calendar Macro. I want this to pop up when cell A5 is active vs assigning a Macro Button.

View 9 Replies View Related

Calendar Popup

Oct 6, 2008

Borowed This Code From The Site And Indeed It Comes In Very Handy .....

View 9 Replies View Related

Calendar Pop Up In 2000

Oct 17, 2008

I created a calendar control pop-up in Excel 2003.

To create, I did the following:

First: I went to Insert>Object>Calendar Control.

Second: I inserted following code

View 10 Replies View Related

Run An Outlook Calendar

Nov 17, 2008

Is there a possibility to run an Outlook Calendar in Excel via code? and share it between users.?

View 2 Replies View Related

Better Calendar Control

May 20, 2009

I'm trying to make it so that when a user clicks on a certain cell, a calendar pops up so they can pick a date. This seems like a pretty common thing to want; I hope Microsoft puts it into the next release.

Anyway, I've read the tutorial found at [url]which tells you how to create a userform, add the calendar control to it, etc.

I've also modified it so that the calendar comes up when the user clicks on a certain cell, and so that the form closes when they choose a date.

I had to use the selection_changed subroutine to tell if someone clicked on the cell, but there are some flaws.

First, moving over to the cell with the keyboard arrows brings up the calendar (undesired result; I only want it to come up with clicking)

Second, if the cell is already selected, clicking it doesn't bring up the calendar since the selection didn't change (also undesired; I would like the form to come up whether the cell was previously selected or not).

View 12 Replies View Related

Add Popup Calendar

Jun 2, 2009

Is it hard too add a popup calendar too my date box. Can it go too year 2075?
When you open the calendar you could click on date too install.

View 3 Replies View Related

Calendar Formula

Oct 24, 2007

I'm trying to make a calendar to log the following throughout the month:

Steps =SUM(C6:G34)
Aerobic Steps =SUM(C7:G35)
kcal =SUM(C8:G36)
Miles =SUM(C9:G37)
Caloric Intake =SUM(C10:G38)

Now the above would be entered on each corresponding day throughout the month and I would like to keep a running total at the bottom. I thought I had gotten the formula worked out, but in the slots at the bottom there is a total of 152 but there aren't any numbers entered for it to total so what I did was place a -152 after the above formula which brought it to 0 then started to enter my numbers but they were off by 30 I think it was.

View 11 Replies View Related

Add Calendar To Userform?

Feb 29, 2012

Trying to add calendar to userform but can't find the add in control

View 2 Replies View Related

Drop-Down Box With A Calendar

Aug 2, 2002

Is there a way to set up a designated cell in a spreadsheet with a drop-down box that will have a calendar, so that when you click on a date in the calendar it puts that date in the cell?

View 9 Replies View Related

Incorporate Calendar

Feb 21, 2007

I have the following worksheet ,named "Calendar", to make an annual calendar and I'm wondering if there's a way to use it to make a calendar in worksheet named "NovemberDaily". On the worksheet named "NovemberDaily" I want to put in cells C14, G14, K14, O14, S14, W14, and AA14 "11/1/2007" if the weekday of the week matches the date"11/1/2007". Is this possible or is there an easier way of accomplishing this. I'm needing the date (e.g. 11/1/2007) in the cells mentioned because it ties into another formula that I'm using later in the worksheet.

View 32 Replies View Related

Created A Pop Up Calendar Using VBA

Dec 3, 2008

I have created a pop up calendar using VBA with the help of VBA Tips at www.fontstuff.com/vba and it works very well. However it has the default date of 12 March, In the tutorial that i used there was some code to use todays date if the cell (in which i was going to put a date) is empty. Which is as follows

Private Sub UserForm_Initialize()
If IsDate(ActiveCell.Value) Then
Calendar1.Value = DateValue(ActiveCell.Value)
Else
Calendar1.Value = Date
End If
End Sub

yet when the calendar does pop up, the date remains at 12 March (the calendar in the visual basic editor reflects the date correctly). I've tried to change numerous amounts of properties, without success

View 9 Replies View Related

Calendar Not Visible

Jun 11, 2009

I have a userform which has a calendar in it (created in another userform).

When a user opens the userform, the calendar doesn't show up. But it works fine in my system.

I have already copied the MSCAL.OCX file in the user's system. But still the calendar doesn't show up. What other file do I need to give the user so that the calendar works.

View 20 Replies View Related

Calendar Output

May 12, 2006

attached spreadsheet. Notice cells A11 through B23.

Is there any third-party extensions, Macros or other functions that can output the dates and corresponding text (in column A) to a nice looking calendar, or even better yet to Outlook, or both?

I tried creating a pie chart or graph function, but non contain a calendar scheme.

Notice cell B7 is an input cell. This would determine the number of days the calendar would show in full. The begin date of the calendar would be in B11, and the last date on the calendar would be in B23. It could be a 30 day calendar, or more or less depending on the input.

For those "visual" people, a calendar format would be amazing, but I can't write a single peice of VB code, so I wouldn't know how to write a Macro.

View 9 Replies View Related

First Day Of Each Calendar Week

Jan 7, 2008

I have some keys in a file that are of the form WK05, meaning that it refers to the 5th calendar week (of this year). I would like to write a function that gives me the first day of this particular week, in this case it would be 28/1/2008

View 5 Replies View Related

Calendar Summary Page?

Dec 16, 2013

I have a workbook with multiple calendar sheets in it, those sheets are names by the staff member name (attendance calendar). We put the value 'H' or 'S' in the cells to indicate whether an employee is on holiday or sick. I would like to create a summary calendar/dashboard that shows which people are off which days, like a summary or another calendar with names in date cells. I have tried various ways, but cant seem to return the value I want, or find a simpler way of doing it.

View 7 Replies View Related

How To Create Booking Calendar

May 10, 2014

I am trying to create a booking calendar for boarding kennels.

I have a separate sheet for each client, containing their personal info and dates of their bookings. I have downloaded a basic calendar but would like it to show certain information.

Is it possible to create a formula which will highlight each cell on the calendar, for each kennel when it is occupied, and show the name?

CALENDAR.JPGCUSTOMER.JPG

View 11 Replies View Related

Creating 30 Day Calendar That Will Run Through Formula?

Aug 15, 2014

I'm trying to make my life a little easier at work. Here is what I am trying to do. I'm trying to create a "calculator" that will tell me the date that a client will leave my program. I understand that I can simply do xx/xx/xxxx-15 and it will get me a new date, easy. Here is the kicker...My office only utilizes 30 day calendars. Regardless if the month has 28 or 31 days, in the eyes of my agency it will have 30.

i'm been trying to mess around with it for 3-4 days now and I can't quite figure it out. I have attached a sample spreadsheet what i'm i'm trying to do.

I would eventually like to create this to be a little interactive (like a pop up or something that is more user friendly) but i'm just itching to get it to work!

View 3 Replies View Related

Create A Calendar From A Table

Nov 11, 2013

I'd like to create a workbook to track milestones of different projects in a calendar view. For instance, the first worksheet would have a table where I can list projects (Project 1, Project 2, etc.) in the top row, and milestones (Milestone 1, Milestone 2, etc.) in the first column. Then I'd populate the table with dates. The second sheet would be a calendar view that shows the milestones of each project under respective days. As an example, I'd have something like "Project 3 - Milestone 1" under January 1, 2014.

PS: I'm using Excel 2011 on Mac OSX.

View 14 Replies View Related

Autofill Calendar From Table?

Jul 24, 2014

I'm trying to solve where my calendar does not properly fill information from a table in another tab. I am using LOOKUPs but that only works for my first example. I have also attached a tab of ideally what I'd like it to look like.

I'm having trouble with the intial lookup and the subsequent lookups

View 1 Replies View Related

Interactive 3 Month Calendar

Feb 13, 2007

I'm looking to have an interactive calendar created that when a specific date is entered in a cell,...example(A1)

The calendar at the top of the screen will reflect 3 months out (in a standard box looking format with the starting day highlighted in Bold. Imagine 3 calender boxes (always 3 months) and when you enter a date in cell 1,...(say 6/07/07, the calendars at the top adjust automatically so that the first box now reflects June and has the 7th day in Bold...the other two boxes now obviously reflect July, and August.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved