Call List Of Values Based On Selection
Oct 23, 2007
I have 2 Fields (Columns) and I have implemented Validation Lists in both these 2 columns.
I have around 10 values in Column A which are available in the List and have around 50 values in Column B in the List.
In other words, one of the five values or items can be selected for a single and unique value in Column A.
is it possible to call one of these 5 values in Column B depending upon the selection of the value in Column A ? Both the columns have validation lists.
View 9 Replies
ADVERTISEMENT
Jun 1, 2006
I am trying to create an interactive Price List / Quote Form. I have 1 tab (price list) that contains all data arrays. I have 1 tab (Items) that correctly calls avalable quantities based on a validation list and then Vlookup populates the formulas with the correct pricing & notes based on the quantity. I would like on the cover/quote page to have a drop down (in cells B23-30) where someone can choose a product based on the list, and then have the collums C,D & F populate with the rest of th information:
Column C with quantities for that product
Column D with pricing based on that quanity
Column F with notes for that quantity
Column E will calculate total based on simple math
Enclosed is my file
View 6 Replies
View Related
Jun 24, 2009
I am trying to create a drop down list that when selected will display data in the 10 rows below and 4 columns, so a total of 40 cells. I would like the data to be based on the selection in the drop down list.
The data looks like this,
RequirementsQtyResourcesQty
Level 1 Sentinel10Level 1 Sentinel105
Level 2 Sentinel10Level 2 Sentinel167
Level 3 Sentinel10Level 3 Sentinel156
Level 1 Banga20Level 1 Banga401
Level 2 Banga20Level 2 Banga307
Level 4 Banga20Level 4 Banga0
i have 27 different combinations of the above list with up to 10 different rows. I have a label for each one, but i cannot get the rows below my drop down list to display the proper values base don the selection in the drop down list.
View 8 Replies
View Related
Dec 18, 2008
I am working on a spreadsheet that is essentially a question and answer based document .... I need to set up the macros so that if a certain response is chosen from a list, it will automatically update the cell / row next to it with a pre-determined response ....
The way the spreadsheet is set up is that the first column has the question, the second column has the answer (yes, no or N/A - from data validation - as a list) and the third column is blank - but is titled "comment/action" .....
For example: if the question is "have you locked the car" and the answer column selects "NO" then I want the "comments/action" to come back with "you need to lock the car", and if the answer is "YES" then I want the comment/actions column to remain blank ...... The same with N/A ......
I will have around 100 questions in the document ...... I know I need to set up the responses on a separate worksheet - i just dont know what the macro's are to identify and place the appropriate response from the worksheet to the relevant comment/action column .....
View 10 Replies
View Related
Jan 15, 2012
I have to filter a data based upon the selection list value.
Ex:
Assume that i have 4 values listed in my SELECTION LIST
INDIA
US
UK
AUS
If i select "US" in selection list ...Filter has to take this dynamically and filter the data..
View 2 Replies
View Related
Dec 4, 2007
how to get a 2nd drop down box to update the range (Not just use C6:C7)based on selection in 1st drop down box.
Example:
If Fat, Use range from C6:C7
If Skinny, Use range from D6:D7
Note: I tried putting an if statement in the input range for box2 but won't accept it.
View 9 Replies
View Related
Jun 8, 2007
I have created a pricing sensitivity for a list of products. In cell C3, users can select a product (i.e. Apple, Elmo, or Bowl) and based on this selection, a range of Prices and Units are then updated and the Revenue for each price point calculated. A few lines beneath this, I have a little summary table that lists all the products. I'd like for users to be able to enter in the optimal price point for each item and then have the Units and Revenue for that selected price point for that specific product automatically update.
For example, if I select Apple from my drop down list my price choices are $5, $10, $15; units are 100, 85, 70; and revenue are $500, $850, and $1,050 respectively. On the summary table, I would like units 85, revenue $850 to update automatically if I select/input a $10 price. This would happen for all the products so at the end I want to be able to calculate a blended revenue mix given my pricing changes.
View 9 Replies
View Related
May 7, 2008
I have been searching through the site trying to find a solution to my issue, but I just can't seen to fixt it. Here is the scenario. I am working on a spreadsheet that will read some data, use that data to update the main chart and fill in the information in a table next to that chart. I recoreded 22 macros, total. Each macro corresponds to the especific type of chart that I need/want.
I want to be able to click on a drop down menu above the chart which will have each of the 22 options. Once the user clicks on the desired option, the specific macro will run and do that it should do. When I run the individual macro (without the VB that I wrote and will mention below), the system does what it should do. Everything looks dandy. But then I added this VB code to the sheet where the chart is:
Private Sub Worksheet_Change(ByVal Target As Range)
Select Case Target.Range("A12").Value
Case "1"
Call a
Case "2"
Call b
Case "3"
Call cc
Case "4"
Call d
Case "5"
Call e................
View 2 Replies
View Related
Nov 21, 2012
I am new to VB macros, I am trying to figure out how to color a tab Green based on a selection from a drop down list.
View 9 Replies
View Related
Apr 24, 2009
I have a list similar to the below:
#....|Name.... | Weighting %
1Artur Boruc 1
2Igor Tudor 5
3Alessandro Grandoni 3
4Gian Elia Amoretti 3
5Olivier Kapo 12
6Kim Källström 13
7Emiliano Bigica 13
8Julio Baldivieso 12
9Fabrizio Miccoli 13
10Peter Vougt 14
11Massimiliano Esposito 12
What I want to do is randomly select either number 1 to 11 (leftmost column OR the person it represents) but also make the selection based on the percentages in the rightmost column. To illustrate using the above example, Number 11 (Massimiliano Esposito) should have 12 times more chance of being randomly selected than Number 1 (Artur Boruc)...
I have used a formula such as
PHP
=INDEX(A$1:A$11,INT((RAND()*11)+1),1)
to randomly select a cell but how would I modify this to include cell weightings? Or is there a better formula?
An additional note I have is that the weighting for each person will always be changing, but will always be a percentage.
View 11 Replies
View Related
Jul 2, 2014
I need VBA code to do the following:
When cell H2 = "Weekly", I need cell I2 to return "50".
When cell H2 = "Bi-weekly", I need cell I2 to return "25".
The value in Column I should change as soon as the value in Column H changes.
NOTE: The value in Column H is chosen from a Data Validation List.
I'm assuming offset is the best option?
View 7 Replies
View Related
Jun 14, 2014
I need to make a dropdown list (I know how to do that) and based on that selection, I need some cells below to automatically complete. How can I do that? Is it possible with or without VBA?
View 5 Replies
View Related
Aug 11, 2013
I'm trying to return 2 values from a table selection, based on a value i.e. if I look up the table for "Team 1" - i'd like to return Team 1 v Team 6, Team 9 v Team 1, and so on, to a Fixtures Section in a different area of my Excel Sheet.
However, the look up value "Team 1" could be in column J or N. I've tried Index, Match, VLookup, IF statements etc....
See below:
J
K
L
M
N
[Code].....
View 1 Replies
View Related
Mar 7, 2013
[URL]....When I select a name in column B, it populates column C's dropdown with that name's list of units. When I select a unity type in column C, I'd like it to automatically populate column E in the same row with the value associated with that unit. The values associated with a particular unit can be found to the right of the sheet. So if in row 2 I select Blake in column B, then Unit 5 in column C, I'd like column E to be populated with 14.
Edit: using Excel 2007.
I attached stripped down version of the sheet which is small enough to post. None of the things I removed should affect the topic at hand. The full sheet is available at rapidshare.
View 6 Replies
View Related
Mar 18, 2014
I am trying to create individualized worksheets based off a master worksheet. I have different committee names that I want to appear on the individualized sheets, based on whether the person is apart of that committee or not. On my master sheet, I choose the persons name under the committee and I want that committee name to show on the individualized sheet. For example, I want A1 on Master to show on Name 1, B3 and A10 on Master to show on Name 1, C3. Can I write a formula to achieve this or or am I asking too much? In my actual file, I will have about 10 names and 5 committees with one person being on up to all 5 of the committees.
View 1 Replies
View Related
Dec 13, 2009
I'm using Excel 2007. I would like to seek some advise on how i may update cells after selecting a month from a drop down list.
i have created a simplified version of what i intend to have. One the 1st tab 'Cash Budget 2009', i have filled up a table with numbers, sorted by months. On the 2nd tab 'Dec09', i would like to create an expense table, to be able to be selected by month. So i have created a drop down list based on the months that are created in the 1st tab.
Upon selection of the month from the drop down list, i would like the cells to display (fetch) the data from the 1st worksheet. It would also be helpful if the name of the 2nd tab can be updated to read as the month that is being selected.
View 4 Replies
View Related
Dec 26, 2012
I've created seven names in my data validation source list on Sheet 3 in the following range of cells, A2-A7. My data drop down validation list is located on Sheet 1, A2 in the same workbook. I would like to trigger a macro based on the name I select in this drop validation drop down list that will fill out an address, telephone number, and email address in the following cells next to my data validation drop down list on Sheet 1: B2, B3, and B4. I want it to be designed so that users will select a name and have that person's corresponding address, telephone number, and email address fill right next to their name on the same sheet.
View 6 Replies
View Related
Jun 27, 2014
I would like to be able to limit a drop down list's contents based on a user's selection in a different drop down. I am using Excel 2003, and I know how to do this in Access, but I can't figure it out in Excel. Basically, I have a list of themes in one drop down. The user picks a theme, and goes to a second drop down which is a list of sub-themes attributable to that one theme and no other theme.
View 1 Replies
View Related
Dec 15, 2009
Attached is the file i am working with. The table spanning from A:AA5:16 contains hours worked per day of the week with respect to the Project chosen from the drop down menus in A7:16. Cells in the range of F,K,O,R,U,X,AA7:16 total those hours worked on a daily basis. The table below should sum the total hours worked per day according to the Project selected in A19 from the drop down menu, with respect to the Project(s) chosen in cell range A7:16. For example, if i am looking for total hours worked Monday on Project RSB i select "RSB" from the drop down menu in cell A19, i want cell F18:19 to be the sum of cells A7 and A9, with respect to the Project selected from cells A7:16. If I select "FRG" from the drop down in cell A19, i want cell F18:19 to reflect the sum of cells F8 and F10.
View 2 Replies
View Related
Apr 24, 2014
I am trying to create a macro that will allow the user to select choices from combo boxes on a userform. The choice of one combo box determines what will be shown in the next combo box and so on. This will occur a set number of times (depending on what they are looking for), at which point the list of possible choices will be presented.
I populated one combo box in UserForm_Initialize() but then I might have to change the others with Combobox1_Change()...
View 4 Replies
View Related
Jun 13, 2008
A project I am working on calls for me to implement a macro that will clear the contents of a cell (but not affect the validation list it contains) based on the selection of another cell or cells. So on the simplified attached example, I need to achieve the following;
On the fist row of options, if cell "C3" is selected, then the contents in cell "D3" are cleared. If cell "B3" is selected then the contents in cells "C3" AND "D3" are both cleared. Similar is needed for the second row of options;
If Cell "C6" is selected, then the contents in cell "D6" are cleared. If cell "B6" is selected then the contents in cells "C6" AND "D6" are both cleared. Finally, if cell "A3" is selected, then ALL of the above cells' (B3-D3 & B6-D6) contents must be cleared.
View 7 Replies
View Related
Apr 12, 2013
I have a workbook that has two worksheets. One worksheet is an input worksheet. A user will select a date from a drop-down list and type in the events that occurred on that date in 8 adjacent cells. The user selects a button that advances date and clears form. On sheet 2, whatever was typed into sheet one is saved via VLOOKUP formula. However, if I try to change something retroactively and select a previous date from the drop-down list, it clears everything in sheet 2 that was typed for any selected day.
View 1 Replies
View Related
May 28, 2014
The function below should return the value in a cell IF the string in the cell two cells to the left of it is "Nemo" Omitting the part highlighted in blue, my function returns a list of unique values...but when it's included, nothing is returned at all. Perhaps, there is an error in the syntax that I'm overlooking?
Function listUnique(rng As Range) As Variant
Dim row As Range
Dim elements() As String
[Code]....
View 2 Replies
View Related
Jun 3, 2013
If a user selects certain options from a drop down list created by cell verification (from list), is it possible to display an input box and have the resulting input populate on another worksheet in the workbook? I have an attendance template I'm working with and if a user selects OT (Over Time) then a input box is displayed prompting for how many hours. The overtime is then tracked on another worksheet.
View 1 Replies
View Related
Jan 30, 2007
I have attached a portion of an excel file I am using at the moment. What I require is a piece of VBA code which will allow me to copy selected data based on a combo box selection. What needs to happen is this :-
If the selection in the "Index" worksheet combo box related to "Month" in cell G19 is for instance "December", I would like the macro to compare this cell value to the cell values in cells C96, C124, C152, C180, C209, C236, C263 and C290 in the "Tech Services" worksheet and where the values match.......copy the commentary (Range C126:Z147 in December's case) to the range C34:Z55.
View 9 Replies
View Related
Mar 19, 2009
I'm trying to create a drop down list which returns values based on what has been selected in the previous drop down list in the adjacent cell, e.g. if 'Apples' is selected in the previous cell then you should only be able to select from 'Gala, Granny Smith', or if 'Oranges' is selected you should only be able to select 'Seville, Blood Orange'. Is there a formula which would do this, or can I use a pivot table somehow? I'm totally stumped.
View 2 Replies
View Related
Jul 20, 2007
I want to have a drop down list in a cell so that the value in the cell can be only selected from two columns of data. Additionally once the data from the first column has been selected I want to be able to limit the inputs the user can select from in the second column.
e.g. In cell C115 I want to have the value BDS05.
I want to be able to select the value BDS from a drop down list of values and once that value has been selected I want to be able select 05 from a list of values from 01 to 14
If I select BCS as the first value then I want the second set of values to be limited to 01 to 02 etc.
I have read about combo boxes and list boxes and I'm a bit confused about the best way to achieve this (or even if I can).
View 6 Replies
View Related
Jul 30, 2013
I have a column of 343 items in E, and their corresponding prices in Row E. I've created a drop down list in numerous cells in Column A for items, and I need to formulate it so that the adjacent cell in Column B for each individual drop down will call the correct prices from E.
View 4 Replies
View Related
Mar 25, 2002
Does anyone have an API that will allow me to get a list of ODBC data sources defined in the Windows ODBC Control Panel?
View 9 Replies
View Related
Jan 13, 2009
I am trying to create a fairly simple spreadsheet with about 8 columns and about 400 rows. One of the columns features a drop-down list with about 8 or 9 different options. Dependant on which option is selected, i would like the entire row to change colour with that option.
For example:
FAILED - whole row changes red
SUCCESSFUL - row has no fill
Tested - row changes to orange
etc.
Is this possible within Excel 2003?
View 9 Replies
View Related
