I have a web service URL from vendor, i need to call the particular method in that web service and pass parameters to method from VBA excel. In C# its working fine.Same method like i need to do from from Excel VBA. My doubt is how to form authenticate xml and how to call a particular method using soap action URL.
View 1 RepliesI have an excel spreadsheet with the column headings a1(Emp Name), b1(Hire Date[dd/mm/yy]). There around 1000 records of employees. Every month I have to generate a report for the following month, for example by the 3rd week of this December 2009 I have to extract the report of following staffs from those 1000+ records.
- those who will be completing 1 year in January 2010
- those who will be completing 5 years in January 2010
- those who will be completing 10 years in January 2010
- those who will be completing 20 years in January 2010
How shoud I do it? What should be the formula in which cells? I would appreciate if anyone could guide me with the complete formula with a very reliable way to do it.
I have a procedure in Access, MySub, stored in Module1.
To call it from Excel, I use the following:
Code:
Dim AccessApp As Access.Application
Set AccessApp = New Access.Application
With AccessApp
.OpenCurrentDatabase Filepath:="C:My location", Exclusive:=True
.Run Procedure:="MySub"
End With
Supposing for argument sake, there is another procedure also called MySub saved in Module2 in Access.
The above code will no longer work as it won't know which MySub to call.
How can I specify the correct one to choose? Of course I can rename the procedure in Module2 to something else.
the macro works fine until it executes the paste values. At that point, the macro jumps to the "CountThem" function which is located in another workbook. The data that I am copy/pasting is in no way connected to any cells that are using that function. Although, other values in the workbook are passed down from data that uses that function.
I am still in the dark ages using Excel 2000.
This is the code for my macro.
Code:
Sub Current_to_Raw()
'
' Current_to_Raw Macro
' Macro recorded 2/12/2014 by
'
'
Range("N14").Select
[code]....
I would like to create a formula that would calculate the length of a person's employment, i.e. hired 8/14/94 till today, for example.
View 10 Replies View RelatedI have a large spreadsheet like this
NephrologyPrinted resent 26.05.09 chased
Nephrology28.04.09 resent 26.05.09Yes
Nephrology28.04.09 resent 26.05.09Yes
Nephrology28.04.09 resent 26.05.09Yes
Nephrology28.04.09 resent 26.05.09Yes
Nephrology28.04.09 resent 26.05.09Yes
There are plenty of other columns, but these are key. The first column is the service type, of which there are 40. I want to have another worksheet that totals all the entries in the third column that don't say 'yes', for each service. So, in this case the first line of my new workbook would say: Nephrology1
I run stats for an operating room and want to be able to look at total patient in room minutes between 7 AM and 3 PM. Problem is, many cases go past 3pm and I want to subtract that out. I have patient in room time and patient out of room time, so in essence I want the total number of minutes the patient was in the room between the two times minus turnover time. I have a pivot table ready to go.
View 7 Replies View RelatedIs it possible to restart a Windows Service with execution from a VBA Macro?
When you go into Windows Computer Management you can see a list of services. You can click a hyperlink to start, pause or restart.
The formula that I currently have in E2, is giving me the number of years served by an employee. Is there another formula that can give me the number of years each employee has served? This is the formula that I have in E2
[Code] .....
Attached File : VACATION DAYS ACCURED.xls
I'm trying to find a formula for calculating the number of business hours a service request may be open; this request may have been opened and even closed outside of business hours. I found a formula that appears to be working:
=(NETWORKDAYS(StartDate&TimeCell,StopDate&TimeCell,holidays)-1)*(CloseTimeColumnLetter$CloseTimeRowNumber-OpenTimeColumnLetter$OpenTimeRowNumber)+IF(NETWORKDAYS(StopDate&TimeCell,StopDate&TimeCell,holidays),MEDIAN(MOD(StopDate&TimeCell,1),CloseTimeColumnLetter$CloseTimeRowNumber, OpenTimeColumnLetter$OpenTimeRowNumber),CloseTimeColumnLetter$CloseTimeRowNumber)-MEDIAN(NETWORKDAYS(StartDate&TimeCell,StartDate&TimeCell,holidays)*MOD(StartDate&TimeCell,1),
CloseTimeColumnLetter$CloseTimeRowNumber, OpenTimeColumnLetter$OpenTimeRowNumber)
What I don't know is HOW it works, I don't know what any of those formula's mean (with the exception of NETWORKDAYS). I'm trying to "show my work".
i am working on a redundancy table to calculate lenght of service at a certain age and what the redundancy in years will be,
age----------------years
less than 23------0.75 per year
23 to 42----------1.5 per year
43 and above----2.25 per year
these figures only count for the years they have been that age
examples
a person who is 22 and worked for two years would get 1.5 years redundancy, 2 x 0.75
a person who is 23 and worked for two years would get 2.25 redundancy 1 x .75 + 1 x 1.5
i can do this table manually adding on to each previous but wondered if someone might have a nice formula that would calculate it automatically
i would imagine there would have to be some kind of lookup to find out how many years they have been in each age bracket
Have a small data base with customer details and comments. I would like a form to sit over that so that people on phones can enter customer # and check info and add further comments etc. for a specific customer. Before I try and design a form is there any templates for this type of thing. Have done a Google and Ozgrid search, but I maybe asking the incorrect names for the procedure.
View 2 Replies View RelatedPer the attached, I am looking to add restrictions to my formula based on YEARS OF SERVICE per the age restrictions each person falls into, those with 0-4 YOS who are under 20 years old etc.
Book10.xlsx
Using Excel 2003 and am trying to do a calculation by customer, by service type. Attached is the workbook and I've tried numerous ways to do this. On the revenue calculation worksheet, I am tryng to calculate the type of service minutes from the data retrieve worksheet, multipled by the service rate on the rate table for the specifc type of minute by customer. I'd like to build it as a vlookup by customer and then by service type, but have run into difficulty.
View 4 Replies View RelatedWhat I'm basically trying to do is make a code that looks at where the "x" values are in my range and if the month matches the current month, open a pop up that says "Service Required: Equipment Name" when the file is opened.
If it's any easier, an actual date could be written instead of an x.
An alert system for service required if you will. I have attached a file.
TestSchedule.xlsx
I've been tasked with creating an updated booking system for a company which offers projects / services to the educational sector (UK Primary Schools.) I've done an alright job at augmenting their current Excel based system, but I would like to take it further so that the system is more all encompassing.
Currently, the booking form is filled in when a booking is made and the data from that is populated into their copy of the contract and our copy of the contract using simple "=" and to a certain extent, the text on the contracts is manipulated based on the booking form data using "IF" functions.
There is a basic macro which removes excess lines from the contracts if they aren't used, but that's about it. The difficulty we're having with the current system is that a lot of our projects are bespoke, happen over more than one date, and require a lot of manual manipulation in order to get them ready, which sort of defeats the object of having a 'clever' booking system.
I don't know very much about VB, but the sort of thing I would be looking to integrate is having drop down lists to select a 'project' which would load project-specific text into the contracts area. Also, instead of having to remove lines manually, I would like the data to be 'dropped in' creating rows as appropriate.
I'm trying to use the following formula to filter data based on "Service Type" and it seems to work on one of the service types but not the other. here is the formula
=IF(LEFT(A5,1)="0","Both",IF(OR(A5="SERVICE",A5="REVENUE",A5="REVENUE",A5="CIC",A5="RAO",A5="CARRIER NAME",A5="TYPE",A5="RECORDS",A5="INCLUDING TAX",A5="BEFORE TAX",A5="FEDERAL TAX",A5="PROVINCIAL TAX"),"Both",IF(LEFT(D5,3)="REG","Table1",IF(OR(D5="900"),"Table2",IF(A6="",IF(B6="","XXX","TRUE"),"XXX")))))
Notice the highlighted red text, this is where I'm trying based it on "Service Type". I have also attached on example workbook, the items highlighted in green should marked as "Table1" and items highlighted redish orange should be marked as "Table". Wierd thing is that I use a similar formula in another workbbok and it seems to work fine.
i have 5040 rows in a sheet. in columns A,B,C,D,E,F, i have some input. and based on that i have some formula on column G.
lets say, min value is at row 4094 by looking at G column... i want to call entire row to the, lets say K L M N O P ....i need a formula for that....
random numbers are included in the formula. So ever time i make any changes on the sheet, min value changes even thought i dont play with the formula and input... so i want my new min value shown at row 1 of K L M N O P, every time i do that
how can i do that?
I am creating a set of lists, each on a different sheet. I want to have the first sheet as a sort of "Title Page" with basic information from the others. Is it possible to create a link of some types so that I could click on "Magazines" for example and go to the sheet called Magazines, or "Books" and go to the sheet called books. The latter would be very handy as this workbook has around 30 sheets in it, which is a pain to look through to find the right one.
View 2 Replies View RelatedI have created an XLA using a blank workbook which has a macro (called CompareMan) I have written within it.
I have written a utility (called INSTALLMAN) to install this add in.
When I run the install it creates and activates the add in OK.
The install also creates a toolbar with a button to trigger the macro.
Problem is, when I click the newly created button, no matter which workbook I am currently in I get a message ...
"The macro INSTALLMAN.xls!CompareMan cannot be found".
So my question is, how do I get my button to trigger the macro in my add in?
I have to do the same procedure for a number of profit centers. The only differences are the names of these profit centers. Therefore I want to use the same code, with changing references. How can I use this array so that it calls/uses 1 profit center at the time? If I use the following code they all are used at once (P1100P1200P1300P1500P1600P1900)
View 2 Replies View RelatedIs there a way to call a sub with out actually saying its name? In other words can I refer to a sub by a value or a cell that holds its name? for example, in my CNC programs I often use something like this;
View 14 Replies View RelatedOkay, I know you can reference worksheet functions with code like:
application.search()
But how do you use a UDF function within VBA???
I tried, thisworkbook.UDF() (UDF being the name of any UDF) but it didn't work.
I have a add in for excel (self made) and I recently hit a wall when trying to add functionality to it.
I have a form "UserForm1" created within the .Xlam file of the add in.
I want this form to be useable for any excel file that might be open, so putting code in the excel file that needs to use the form is undesirable.
The functions carried out by my add in are activated trough ribbon buttons.
my goal is to have a button on the ribbon that loads the form.
As the UserForm1.show code doesn't work, I will need a alternative.
I did find the code for making the sheet show if there would be a button in the workbook, however I want all code to be in the add in.
I am using the following code to find the text "Employment" in any row in colum H. If found it copies it to another worksheet.
Sub CopyRowsSht8()Sheet8.SelectSet Rng = Sheet8.Range(Sheet8.Range("H1"), Sheet8.Range("H" & Rows.Count).End(xlUp))For Each cell In RngIf cell.Value = "Employment" Thennum = cell.RowSheet8.Range("A" & num & ":" & "L" & num).Copy Destination:=Worksheets("Employment").Range("A" & Rows.Count).End(xlUp).Offset(1, 0)End IfNextCall CopyRowsSht9End Sub
1. This sub calls CopyRowsSht8 and then this calls CopyRowsSht9 and so on. I have 15 sheets so how would I code this into some kind of loop to include sheets 8 to 22 instead of calling sub then sub then sub etc.
2. It takes a while to do just two sheets so 15 would be very slow - can this be made faster. The maximun number of rows containing data is only about 100 on each sheet -could that make a difference?
Im trying to call another subroutine within the same workbook but it doesnt work,
---------------------
Sub Macro1()
Dim mac1 As Variant
Dim mysub As Variant
Select Case Cells(1, 3)
Case mac1
Call mysub
End Select
End Sub
---------------------
The below thing has been driving me up a wall for 2 days now. I know the fix has to do with calling the variables, but I can't figure out the exact code.
Sub Parsing_Logic()
Dim IBG_URL As String
Dim A As String
A = Mid(IBG_URL, Application.WorksheetFunction.Find("/200", IBGURL), 8)
Dim B As String
B = Left(IBG_URL, Application.WorksheetFunction.Find("/200", IBGURL))
Dim C As String
C = Right(IBG_URL, Len(IBG_URL) - (Len(A) + Len(B)))
Dim D As String
D = Left(C, Application.WorksheetFunction.Find(".200", C))
End Sub
Function IBGLink(IBG_URL As String, Formatted_Date As String)
If Application.WorksheetFunction.IsErr(A) Then
IBGLink = (D & Formatted_Date)
Else: IBGLink = (B & Formatted_Date & D & Formatted_Date)
End If
I am trying to call another macro, but instead of using the name of the macro, I have it in a variable. I am getting an error that says "Compile Error: Expected sub, Function, or Property." Can you call a macro that is in a variable? I basically have a bunch of macros created. I also have a list of the name of those macros on a worksheet in Excel. I want excel to start at the top of the list in excel and run the macro, then move down and run the next macro, and so on. Below is my code.
Sub Commercial_2005()
Dim Macroname As String
Workbooks("bleeg.xls").Activate
Worksheets("CommercialList").Select
Cells.Range("a1").Select
While ActiveCell.Value <> ""
Macroname = ActiveCell.Value
Workbooks("copy of recast_Report_v2.xls").Activate
Call Macroname
Workbooks("bleeg.xls").Activate
Worksheets("CommercialList").Select
ActiveCell.Offset(1, 0).Select
Wend
End Sub
I guess I just don't understand the basics of calling a function. I have the following function in a standard module:
Function CleanUp(ws As Worksheets)
ws. Range("A2:P100").ClearContents
End Function
I have this code in a worksheet module:
Sub Trying_to_call_a_function()
CleanUp (ThisWorkbook.Worksheets("Month End"))
End Sub
But when I run the routine that calls the "CleanUp" function, I get the message: "Object doesn't support this property or method." I have tried changing the Function to this: CleanUp (ws as Worksheet) [instead of (ws as WorksheetS)]. Yet, this does not change anything.
Is calling a subroutine within another different than running it from the play button in the VB editor? I am getting different results.
I have the following code that I want to call from another subroutine that creates a series of command buttons.
Sub DynamicButtons()
Dim ButtonCount As Integer
Dim ctl As OLEObject
' Create the Button objects
ButtonCount = 0
For Each ctl In Sheets("Sheet1").OLEObjects .............